General :: Fedora 14 Wifi Card Wont Enable?
Jan 19, 2011
I have a clevo M760T laptop. It used to run ubuntu 10.10, recently i reformatted it to fedora 14 and now the wifi card does not work. Heres the weird thing, the wifi card has a light on the laptop's front panel that says if its "enabled" (can be seen by the O/S, in ubuntu i would have no wlan0 interface until i enabled it this way, and it wouldnt show on lspci as far as i remember).The wifi is enabled using the Fn-F11 combo. I know the F11 key works as i can fullscreen firefox with it, and I know the Fn keys as i can use the Fn-F5/6 combo to alter volume etc. No matter what i try i cant seen to be able to get that light on, or the card to appear in fedora.This may be unreleated to fedora, maybe the card has broken, but it seems odd that that'd happen right when i installed fedora. Annoyingly, I dont know what make / model wifi card it was so i dont know if its related to kernel modules or similar (and nothing showing for it in lspci). Just that it worked (including actually using it to go on the internet) in ubuntu 10.10, and does not now in fedora 14.
View 1 Replies
ADVERTISEMENT
Sep 5, 2010
configure wifi in fedora 13.i dont knw anything abt fedora..
View 3 Replies
View Related
Jun 16, 2010
I am complete newbie to Linux and it has just been a few days since I have started using Linux and I really love it. I have a problem that I cannot connect to my Wifi network but I can connect to wired network.I have tried disabling and enabling (System<Administration<Hardware Devices)the Broadcom STA wireless Driver but when I go to network manager I am only able to connect with wired Network and not wireless network .I have Dell Vostro 1520.
View 1 Replies
View Related
Jun 18, 2011
how to enable or disable wifi on backtrack 5?
View 3 Replies
View Related
Jul 20, 2009
How do you enable the graphic card? i have an ATI one and using fedora
View 2 Replies
View Related
Mar 3, 2010
I just loaded the boot-able cd, and I do not have enough knowledge with Linux bases OS's to figure out how to enable the wireless card. ifconfig produces an eth0 and a lo, when I try ifup wlan0, it says: configuration for wlan0 not found. I have looked at all the forums notes and cannot find anything that seams like it is the same problem.
View 12 Replies
View Related
Mar 28, 2011
i am trying to install asus usb wifi card WL-167g v3 in fedora 14. but i am not able to install it properly.
View 4 Replies
View Related
Sep 16, 2010
I cant seam to find out how to get my card to work i cant find out how to install the driver or finding the wifi card on the system.
View 9 Replies
View Related
May 12, 2011
get WIFI working on my Dell D600 with Ubuntu 11.04 freshly installed. I some limited sucched following the this post t=1621331 this got the card working but it was very very slow over 70% packet loss to the WIFIrouter. 1. Machine details Dell Latitude D6002 Wireless Broadband and Chip setlspci -nn | grep Broadcom - 02:03.0 Network controller [0280]: Broadcom Corporation BCM4309 802.11a/b/g [14e4:4324] (rev 02)3. Check interfaces
eth0 Link encap:Ethernet HWaddr 00:0b:db:e0:1c:5b
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
[code]...
View 5 Replies
View Related
Mar 14, 2011
As a part of my final project,i am beginner and this is the first one that i have the opportunity to work under linux fedora,my task consist to develop with C a driver of wifi by using the SDIO Wifi card as an interface. This driver will be included in a digital receiver TV.
View 2 Replies
View Related
Dec 17, 2010
I have just installed Fedora 14 on my desktop machine and have just discovered that it can't detect my WiFi card. The card is an Edimax EW-7711In which the makers say will run with Linux. I know that the card works fine with Ubuntu because my brother uses the same card in his Ubuntu machine but he is away until after Christmas so I don't know what he did to make it work other than I know he used ndiswrapper and the Windows drivers that were supplied with the card. I have looked for ndiswrapper in the Fedora repositories but it doesn't appear to be there.
View 14 Replies
View Related
Jan 20, 2011
With my Compaq CQ62 it seems I can either have a distro provide a working wifi or a working soundcard but not both. I would love to have Linux working properly. Wireless internet works great in Windows 7. The ethernet works perfectly when I plug directly into my router, but pressing the wireless button will not change the light on it from orange to white or do anything else. Yet a simple distro like crunchbang or kubuntu seems to make the wireless work fine.
They just cant make my soundcard work. Being that there is at least some sort of a protocol for installing wireless drivers, I figured I would go with the distro that gives me SOUND since installing a sound driver seems unheard of or impossible. I have a realtek wireless network card in my laptop that Fedora, one of the biggest names in Linux, seems oblivious to even recognize. When I click on the network icon and go to Manage Connections, the Wireless tab is greyed out and cannot be clicked on.
View 14 Replies
View Related
Feb 5, 2011
I am trying to pin point the problem I am having with my wifi card which used to work just fine with F13 and after installation of F14 it hangs my OS.
Fedora hangs when card is inserted and if it is inserted at a boot time, fedora hangs at starting udev.
I attached my messages log file but I think there is no info in there.
About log:
I have some strange problem with my bios, cause every time i restart my laptop it always has same time and date so you should ignore repeating time and date on reboots
at line 1 i turned on pc
at line 580 it finishes shuting down i issued with reboot
at line 581 it is starting up again
at line 1140 i inserted the pcmcia wifi card, and there is nothing there
you can see that at next line 1141 system is rebooted and log file is started again
View 1 Replies
View Related
May 4, 2011
I am running (K)Ubuntu Lucid 10.04 64bit on a Dell Latitude E6400, WiFi Card Intel 5100. Never had any problems with networking. Up to about 2 weeks ago. I do realize there have been quite a few posts with this network adaptor, but non really described the problem I have here.
What happens is that suddenly the WiFi LED on the computer stops blinking, the WiFi connection gets disrupted, and the device is not recognized anymore when checking ifconfig. Only cold restarting the machine helps then... it will work for a while (between 1 and 20 minutes) and then crash again.
On Windows 7 the card works perfectly fine. With Ubuntu 11.04 in Live CD mode I have the same effects (connection crashes after a while). Also tried booting an older kernel, no success.
My exact hardware:
Code:
I notived the following problems in /var/log/kern.log
Code:
View 4 Replies
View Related
Jan 6, 2011
I own a Dell Mini 10v netbook, I love the little thing, except I hate the Broadcom wireless card, I would much rather have a card that can use open source drivers. I have been searching on Google, looking on forums and looking on the hardware sites, but I cannot find a replacement card.
The problem is the tiny Dell has a tiny place to put the card and according to Dell and Broadcom, it is a "halfcard", which I have no idea what that is.
replacing the wifi card on this netbook?
View 3 Replies
View Related
Jan 16, 2009
How to enable Desktop Effects with Intel on board Graphics Card on Fedora 10?
View 1 Replies
View Related
Apr 18, 2011
Trying to make sense of this Linux stuff, by trying to install Fedora 14. First impressions are it?s a parallel universe populated by those who hark back to the era of Windows 3.1 / DOS, and earlier, where command line instructions and messing around with .ini files was all the rage. Which might all be a great little hobby to go back to, being more 'at one, and intimate' with my machine and learning a new skill to take some pride in, but all it means so far is my patience is being really tested by needing to learn it all from scratch!
The installation guides seem to suggest that if your graphics card is not good enough then the installation will default to the text based one. Which is what happened in my case. I can get to the login prompt after the installation, but that's the point where it gets really frustrating in having my machine think it?s a mid 1980s Commodore 64 or something!! Never mind PEEK and POKE, I just want to THUMP or KICK it.
I read somewhere I should start X Start to start the GUI. Nope, x start or xstart doesn't do anything. I then read that only works if I had installed X Windows. Can't find where or how I install X Windows though! I then read, as I say, things default to purely text if your graphics card is not good enough, but then I can't find anything about what the minimum spec is. Seems odd that a card that can cope with Windows can't work with a system as basic as linux/fedora with its frustrating command line-intensive way of working.
- what the minimum graphics card spec is to enable GUI?
- how to install this X Windows thing?
View 14 Replies
View Related
Jun 3, 2011
use dell D531 builtin wifi card
View 2 Replies
View Related
Dec 22, 2009
I just installed x64 Fedora, and as the title says, NM fails to detect my WiFi card. It's an Encore ENLWI-N with a RaLink RT2800 chipset. The card does show up when I run lspci, although iwconfig yields nothing.Not sure if this helps, but when Ias running Karmic Koala, Ubuntu detected the card immediately and required no configuration
View 2 Replies
View Related
Mar 28, 2011
i am using fedora 14 in my lenovo z560 laptop. It contains broadcom wifi card. The configuration is.Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g LP-PHY [14e4:4727] (rev 01) Subsystem: Broadcom Corporation Device [14e4:0510] I want to inject monitor mode in my laptop to run kismet . But i can't. I installed broadcom-wl driver in my laptop but i think its not compatible to run monitor mode..
when i run kismet it show me error that :------ try some other open source kernel driver And the other is :- kismet find only binary value eth1 port. It isn't detecting wlan0 port
View 10 Replies
View Related
May 25, 2011
how to enable the Gnome Shell with an AMD 6950 graphics card and the default Fedora 15 drivers? I may try the AMD Catalyst proprietary drivers but from history those usually lag behind the Fedora versions. I also read some people had issues with the current AMD Catalyst drivers in the Catalyst guide thread.
Also, the AMD 6950 graphics card fan is at full speed all the time in Fedora 15. I do believe you can with the Catalyst drivers using aticonfig but was wondering about the default Fedora 15 drivers?
View 2 Replies
View Related
Jul 20, 2011
How To install windows drivers for a WiFi card -TEW643Pc card
View 5 Replies
View Related
Aug 15, 2011
I have just installed an Edimax EW-7612PIn PCI-E Wifi card which has an RTL8192SE chipset. This chipset is not supported under current F15 kernels so I have installed the driver and firmware from source and have that working fine. The driver can see the card and I can issue 'iwconfig' commands successfully enough to see my Wifi network.
The problem I have is that I don't understand the relationship between iwconfig and wpa_supplicatant and as I'm running a headless F15 server I cannot use the NetworkManager GUI to help me. I should also note that the Wifi network is using WPA2-Personal encryption.
This is what I have done:
Configured /etc/sysconfig/network-scripts/ifcfg-wlan0 with what I think are reasonable values (based on google searches), including the ESSID, TYPE as Wireless, etc.
Configured /etc/wpa_supplicant/wpa_supplicant.conf, including using the key value returned from wpa_passphrase.
Arranged for wpa_supplicant to run from boot, using chkconfig.
However when I run 'ifconfig wlan0 up' I get the error message 'link is not ready' and indeed looking at the output from 'iwconfig wlan0' there are no configured values. I also understand that some values are configured by iwconfig and others by wpa_supplicant, however it's not clear what.
How do I permanently set iwconfig values?
How do I configure wpa_supplicant?
View 3 Replies
View Related
Nov 29, 2010
I am trying to install Realtek RTL8192E wireless drivers for Toshiba satellite 510 in Fedora 14 KDE SPIN. I have been searching it for long time. I am not getting any tutorials or any methids to get this sorted.
View 1 Replies
View Related
Sep 19, 2009
RT2500 wifi card could not connect to wireless router using WPA personal.OS - RHEL4; Dell Inspiron C600; interface detected ra0
View 12 Replies
View Related
Sep 21, 2009
I have Lucent Technologies Orinoco Silver 11 Mbps PCMCIA wifi card. It worked perfectly in Fedora 10, but after updating to Fedora 11 it stopped finding any wireless networks. The updating were done with automatic updating utility. The card works perfectly in Windows, I tested it today.
My laptop is HP nx6110 if that matters.
Here is the situation:
When I plug-out the card, the Network Manager disables wireless networking as it should. When I plug-in the card, wireless networking is enabled, so the system seems to recognize the card in some way.
If I try to connect to "Hidden wireless network" (because there isn't any wireless networks listed in the Network Manager) system tries to connect for a couple of minutes, and then asks wireless settings again. Orinoco card's lights DOESN'T blink normally when connecting to the network (one light should blink rapidly and one should light continuously, but both are blinking rarely or doesn't blink at all).
In System->Administration->Network in tab Hardware (hope those names are correct, I use Finnish version of Fedora...) is:
It seems that the card is detected right.
Here is what I have done to get the problem solved: In System->Administration->Network I have tried to connect to the wireless network manually (disabling the Network Manager). I can't get the connection. It gives me random error messages, sometimes "Check the cable" or something like that, sometimes just timeouts IP determination.
I have tried to connect different wireless networks, no connection. All tested networks worked with another computer.
No matter if I reboot or service network restart or plug-out plug-in the card... the problem still appears.
Tried to find (and reinstall) drivers:
Code:
No Matches found
Code:
Here is the output of lspci. The output is the same if the wifi card is connected or not.
Code:
LAN connection is working just fine.
View 3 Replies
View Related
Feb 20, 2011
I'm a Linux newbie. Used to use Ubuntu, but I switched to Slackware because I want to learn how Linux works better.
On my Samsung qx410 laptop, I can't connect to the internet. I went to the System Settings -> Network Settings and all the tabs there, but it wouldn't detect any connection, wireless nor wired.
I noticed that the kernel of Slackware 13.1 is out of date, so I tried compiling a newer one, but I couldn't get that to work.
I tried downloading this file: iwlwifi-6050-ucode-41.28.5.1.tgz but even after reading the readme, I had no clue how to go about installing it or even whether it was the right thing to install in the first place.
How can I get my internet working?
View 6 Replies
View Related
Jan 27, 2011
I have been trying to enable compiz on my fedora 14, but when i enable the desktop effects the graphics just crashes and fedora freezes. When i type lspci -nnk | grep VGA for the graphics card i get:
I made alot of research on how to get Intel graphics work on Fedora, but couldnt find any solution
Same problem I had with Fedora Core 12 and 13.
View 5 Replies
View Related
Jul 26, 2011
I have recently installed 11.04 on my ASUS EEEPC 900 and am having problems with getting the wifi enabled and able to pick up any signal. It has a broadcom device in there and although I have downloaded the patch that should be able to fix it Im unable to install it.
View 4 Replies
View Related
Aug 7, 2010
Have an odd problem on a Dell Latitude 13 w/ a Intel WiFi 5100 card. The wifi antenna is disabled on startup into Ubuntu 10.04/64-bit. There's no hardware enable/disable that I can find.I have tried "sudo ifconfig wlan0 up" to enable it, the light for the wifi antenna comes on, but still no luck.I know the wifi works in Ubuntu, because if i load windows first, then reset into Ubuntu, once in a while it works just fine.
View 2 Replies
View Related
