General :: Install Windows Drivers For A WiFi -TEW643Pc Card?
Jul 20, 2011How To install windows drivers for a WiFi card -TEW643Pc card
View 5 RepliesHow To install windows drivers for a WiFi card -TEW643Pc card
View 5 RepliesI am not able to install wifi drivers in RHEL 5.4. OS has installed drivers of Bluetooth But It does not install driver of wifi. I have recently installed the linux.
View 1 Replies View RelatedI've had an annoying couple of days beginning with a win7 reinstall on a dual boot system (win7/10.10) that wiped out grub. I reinstalled ubuntu (10.04) in the hopes of just getting grub2 back up, but that failed and I ended up with a new install of 10.04 on the partition and a happily functioning and coexisting win7/ubuntu wit grub working the way that I wanted.
However, I'm traveling, and tried to reinstall the wifi drivers manually. I think I messed something up and installed the 10.10 drivers onto the 10.04 system (I only had a 10.04 disk and the pendrive usb method failed). Anyway, when I tried to (re)install the drivers from the cd, I got the error: a later driver has already been installed. However, the problem at hand is as follows: now my win7 install doesn't see any of the wireless networks around.So, I think I somehow fraked the wifi card.
I cant seam to find out how to get my card to work i cant find out how to install the driver or finding the wifi card on the system.
View 9 Replies View Relatedi came across BT4 last few weeks ago, and i tried it in vmware and was tempted to know more, so now i wanna try to install it and dual boot. Here's my problem, when installing the install.sh i get 2 options instead of 3 options in the partioner, so i couldnt install BT4 without erasing my W7, also if i do successfully install it, how do i install drivers for my wireless card, ohh and my laptop is a Acer Aspire 4736G, my wireless card is a intel(R) WiFi Link 5100AGN...
View 2 Replies View RelatedWith nearly all Linux distributions (Ubuntu, Kubuntu, and Linux Mint being the exceptions), my system never seems to recognize that my laptop even has a wireless card attached to it. That is, when I run "lspci" the wireless card doesn't even show up on the list like it does with Ubuntu/Kubuntu/Mint. This narrows my options when it comes to choosing a distro to install on my computer. I can't seem to find instructions as to how I can make my wireless card work. I assume it needs a driver. I managed to find the driver, I think, in the form of a .tar.gz file. The card is a Realtek Semiconductor, RTL 8191SEvB Wireless Lan Controller (rev 10).
View 1 Replies View RelatedI'm trying to install the drivers for my nvidia graphics card. I downloaded the shell script from the nvidia website. However, there's something peculiar going on. When I execute the shell script it says it cannot find my kernel headers, yet I can verify that my /usr/include/linux/kernel.h does exist. I have selinux on, but just installed os with it on, so contexts are fresh. Checked them as well. After doing some research I found something out. When I run a 'uname -a' I get this.
Code:
Linux ariel 2.6.18-194.el5PAE #1 SMP Fri Apr 2 15:37:44 EDT 2010 i686 i686 i386 GNU/Linux
Yet when I ran 'yum install kernel-devel kernel-headers' they installed the following versions.
Code:
kernel-headers-2.6.18-238.12.1.el5.i386
kernel-devel-2.6.18-238.12.1.el5.i686
Shouldn't they be
[Code]...
I see that the error in the nvidia shell script can't locate the header files for the RUNNING kernel version which makes sense. Why would yum install that version instead of the one in 'uname -a'? Or am I misunderstanding something?
I have installed Ubuntu for netbooks on my four year old laptop and of course the wifi card is unable to search for wireless networks when I'm booted into Ubuntu. I do have the driver software on a recovery disk. Would installing it in Ubuntu fix my problems?
View 4 Replies View Relatedi have a little experience with ubuntu but i have had bugs that are not resolvable at this time in ubuntu. so instead of giving wild bill back my pc i am looking for a new distro. my concerns with ubuntu revolve around acpi. no fan control and high temp. the 2nd problem that is almost overlookable is the ata1 softreset error. it usually is no problem but occasionally have to do manual fsck to fix. so heres my laptop specs. toshiba a305d-s6848. amd turion x2 ati x1250 integrated. 3gb ram. 500gb hd vista and ubuntu 9.04 dual boot grub with 100gb ubuntu and the rest vista. so q1= what suse version would be best?
q2= is suse's acpi better? ubuntu runs all features but fan control
q3= is suse as easy to install? or harder
q4= ati graphics i know for my card went to legacy what version still has the ati drivers for my card
q5= is suse easier or harder to work with and get everything working.
i know no linux is or opsys is perfect. im just looking for one that is stable and works the pc correctly. i know its a big thing to ask. i know no one can tell me that. but just looking for suggestions. im thinking of downloading suse and does all the downloads support live sessions.
I just installed ubuntu 10.10 on my HP G70-460US laptop, the ethernet connection works but my wifi card cant be detected..I dont know if the the wifi state being "off" (there is a button to turn it on and off) has anything to do with ubuntu not being able to pick up on it..but even before i had no problem getting ubuntu to find the proprietary drivers.
View 9 Replies View RelatedI recently switched from ubuntu/mint to fedora, and I cant seem to get my wifi drivers to work. its a generic wifi usb that ubuntu, mint, and chakra have been able to automatically detect and install. is there a tarball that has all the generic drivers for ubuntu, that I can install in fedora so I can get my internet connection working?
View 1 Replies View RelatedI am having some issues compiling my WiFi card drivers. I haven't encountered this issue on any other distros (including Fedora). I would prefer to use openSuSe however so I hope someone here could tell me how to solve this.I have a fresh install of the x586 DVD, fairly complete.The issue is picture in the attached image: basically I try to run a make and I get the pictured error.
View 3 Replies View Relatedjust posted the same question in a thread with no questions allowed. deleted the message and here is the question again: I'm looking into updating my videocard with something more Linux-compatible (read: NVidia
instead of ATI). Is there any kind rule of thumb as to what series of cards is supported best? Atm I'm watching a Geforce 7900 GT on ebay, is that a good choice as far 3D acceleration goes? Which card would you recommend to get the closest 3D support to Windows drivers?
P.S.: I'm going to play games with the card. I use PlayOnLinux, which works for a very high amount of my games, as long as I'd have 3D acceleration. Performance is irrelevant as long as it's higher than a Radeon X850XT.
Any link, code, any thing will work.
<<mod edit: removed advertising in sig>>
I just installed a minimal version of Ubuntu 10.10 (with Openbox) over 10.04. Mainly everything's ok, but I have three problems:
1. When shutting down or rebooting, my speakers make a loud pop. Upon googling around, I found this topic on the Arch forums. Running
Code:
Before rebooting/shutting down works. I, however, would like to have this permanently fixed so I don't have to run these commands every time before rebooting/shutting down.
2. I can't install the ATi video card drivers. I downloaded the correct driver (10.9) from the ATi website and made sure I had the packages found here installed. I also made it executable by running
Code:
When I run the installer, using
Code:
I get this output:
Code:
3. When booting, I get a message saying something like "intel_ips can't find i915 symbols, so graphics turbo is disabled". When googling for this, I see this is a kernel related issue. Since I don't have any understandings of kernels, I thought this is a little too high up for me. What does it mean and how can I fix it, as it slows my boot down quite a bit?
how to install the drivers for my linksys wusb100 ver2 wifi card. What I have found so far is that the usb stick uses a ralink driver (rt2870) I have read that I may need to compile the driver on my system but I am not sure how.
View 9 Replies View Relatedwhen i installed linux 5.0 on my desktop. I had'nt got the eth0 option when i run the neat command. It had'nt taken the driver of lan card at the time of installation. And If i wants to add a new Lan card how to install its drivers.
View 2 Replies View RelatedI need help installing graphics drivers for my nVidia 8600GT.
View 3 Replies View RelatedI use Ubuntu 10.4 or 10.3 (How do I find out)I'm trying to install the drivers for my wireless card (I don't know what hardware I use) I'm running on a Compaq Laptop 6735s and I was told to use this This site tells me to pick either a 32 bit or 64 bit, I don't know which one I am. so I can run off my wi-fi internet?
View 6 Replies View RelatedHow to establish a VPN connection,The details I get to connect the VPN are ipaddreess ,username/password How to install WiFi drivers on RHEL5
View 1 Replies View RelatedHave just got a Dell i5 and have installed Fedora 8, but I dont have any of the device drivers (sound, wifi, ethernet etc).
View 6 Replies View RelatedI have installed Fedora 8 on my laptop. My laptop has a " Network controller:
Broadcom Corporation BCM94311MCG wlan mini-PCI " wireless Card.
I want to get the wireless working. I did an 'lsmod' and I found that the modules for this card is not installed. I tried to start Network Manager, but network manager cannot connect to wireless but it cant. How and where can I get the drivers for this and how do I install those modules. My laptop is a Dell vostro 1400.
I am attempting to install a WLAN card driver but I'm having trouble with running "make". When I launch it it tells me I need to set the kernelpath, but my problem is that I have no idea where the kernel even is inside of fedora. I'm on Fedora 14.
View 2 Replies View RelatedI installed ubuntu netbook remix (the new version 10),and when I try to install drivers for my network card it says I need an internet connection,when I cant access the internet,I even tried using a wired connection (since I usually connect via wireless),but still its no use. My netbook is the following: [URL]...
View 1 Replies View RelatedI wonder if there is anyone who could install the Wireless card drivers in Backtrack 3? and post where i can download it later?My Wireless card:Intel Wifi Link 5100 AGN( I found a post but i dont understand it and im new whit linux HERE )
View 3 Replies View RelatedI've been using Ubuntu and Mint for a few years now, and I want to try Linux on my HP Stream7 Tablet. I was very excited to learn that Debian 8.0 and later has support for 32 bit UEFI on 64 bit Processors and went ahead and installed the multiarch version of 8.2. It works, but I have no GUI (Just a command line) and no WIFI connection. It seems the GUI didn't install and the WiFi card is not supported. I have found a driver for the wifi card but don't know how to install this driver. URL....
View 4 Replies View RelatedI am still new to porting wifi drivers. I am currently porting Ralink RT5370 driver, no problem with the compilation but when I execute insmod operation I got a lot of errors regarding RTMP. This is a part of the error I got:
rt5370sta: Unknown symbol rausb_buffer_free
rt5370sta: Unknown symbol RtmpOsFreeSpinLock
rt5370sta: Unknown symbol RtmpOsPktHeadBufExtend
rt5370sta: Unknown symbol RtmpOSTaskNotifyToExit
rt5370sta: Unknown symbol RtmpOsGetNetDevName
rt5370sta: Unknown symbol RtmpOsHtonl
rt5370sta: Unknown symbol RtmpOsAtomicInterlockedExchange
rt5370sta: Unknown symbol RtmpUtilInit
rt5370sta: Unknown symbol RtmpOSTaskInit
rt5370sta: Unknown symbol RtmpOsAtomicInit
insmod: can't insert '/home/rt5370sta.ko': unknown symbol in module or invalid parameter
Based on the some forum that I've read, adding the MODULE_LICENSE("GPL") is one of the solution. I did add it inside usb_main_dev.c and recompile but I still get the same errors.
I have been trying to install fglrx drivers for my ATI card with Debian testing (x86) but without any luck. I have tried what it says here http://wiki.debian.org/ATIProprietary but I only come up with a blank screen (and also invoke-rc.d gdm stop does not work either?) I have also followed the directions at [URL]....html and that doesn't work either (make error 127). I must be doing something totally wrong.
View 6 Replies View RelatedI want to install a new graphics card, Nvidia Geforce 9400 GT, into my system running Fedora 12, x86_64.
* Should I install the hardware into the system first?
* Or should I download the proper drivers and install them first, before hardware?
* Do I need to disable or remove drivers for my integrated graphics card (Integrated NVIDIA GeForce 6150 SE graphics) before I do anything?
A few years back I gave linux a try. It was fun but eventually I dropped it because simple tasks like installing software were always a practice in goose hunting and copy/paste command marathons. I am trying again to get fedora up and going. Thinking many of the old methods would be cleaned up by now. I was trying to install nvidia drivers for my 8800 card.
I download the *.run file and it tells me I need to disable "X...etc" so I init 3 to the command prompt and run the *.run file there. Then the installer says.... "hey buddy.. you need gcc to make this work". ok.. I type init 5 to get back to the internet browser. So I search about google for a few moments and then find the yum command for getting gcc installed. Run the gcc and again... init 3 to get back to the command prompt and run the *.rn file for the nvidia drivers. This time the installer says... "hey man... you need the kernel source tree".
[Code]...