I have recently installed 11.04 on my ASUS EEEPC 900 and am having problems with getting the wifi enabled and able to pick up any signal. It has a broadcom device in there and although I have downloaded the patch that should be able to fix it Im unable to install it.
View 4 RepliesI recently installed Deluge 1.2.0 from the following PPA:[URL]I using this on two different Linux computers. One is running Linux Mint 8 and the other is running Ubuntu Netbook Remix 9.10. The first time on either computer when I enable WebUI in the Deluge GUI it works fine. However if I ever disable it in plugins section I am subsequently unable to re-enable it (doesn't appear in the side panel again). Rebooting or reinstalling Deluge seems to have no effect.Is this a bug or am I doing something wrong?
View 3 Replies View RelatedHave an odd problem on a Dell Latitude 13 w/ a Intel WiFi 5100 card. The wifi antenna is disabled on startup into Ubuntu 10.04/64-bit. There's no hardware enable/disable that I can find.I have tried "sudo ifconfig wlan0 up" to enable it, the light for the wifi antenna comes on, but still no luck.I know the wifi works in Ubuntu, because if i load windows first, then reset into Ubuntu, once in a while it works just fine.
View 2 Replies View RelatedI just installed 10.04, just migrating to linux. I can't see the network manager anywhere. I have the applet installed. I can't get the wifi adapter enabled. The chipset iwl8345 shows on the output when I run config. It seems to me that I need to get the NM up and that should doit. here is ishw:
ubuntu@ubuntu:~$ sudo lshw -C network
*-network DISABLED
description: Wireless interface
product: PRO/Wireless 3945ABG [Golan] Network Connection
vendor: Intel Corporation
[Code]....
I have tried installing the original CD os 8.04 (Dell system restore) again hoping that everything was on there in order to get me connected to wifi again. Connecting to wifi seems to be the main issue that people have trouble with.I feel that I have 3 options now:
1. Sell the laptop (it is a month old!)
2. Pay for support
3. Put windows on it
It is a shame as I liked Ubuntu 9.10
unable to use DWA-125 Wifi in 10.04 LTS
lo no Wireless extensions
eth0 no Wireless extensions
I am using a Linksys WMP11 V27 pci card that supposed to be talking to a Linksys BEFW11S4 wireless router (802.11B) ...I am able to connect directly to internet (ethernet cable hooked to this wireless router) ... but for indepedence I need to go wireless.I defined the configuration using the Network Connections ... also through ndisgtk .. can't seem to get this two to consolidate.On /var/log syslog I see ....
an 22 14:27:10 ubucomputer NetworkManager: <info> Sleeping...
Jan 22 14:27:10 ubucomputer NetworkManager: <info> (wlan0): now unmanaged
Jan 22 14:27:10 ubucomputer NetworkManager: <info> (wlan0): device state change: 2 -> 1
[code]...
I'm trying to establish a connection to my ISP which uses PPTP protocol and a VPN server. The deivce I got from my ISP is a modem, not a router. The problem is my computer is unable to communicate with the ISP VPN server.
P.S Here are the instructions for Windows XP which work: http://portal.bnet.hr/ZG/windows-xp.htm
Here's what I have done so far code...
I have dual boot system and on windows I am able to connect to wireless but on Ubuntu I am not able to connect to wireless.
I desire to learn to trouble shoot the problem my self hence I would appreciate if some one guides me How to look for the problem.
and how to find what is wrong and right
That is why I am not posting any output here but rather would like to learn to solve the problem by myself
I reported recently that I have a problem connecting to a Windows network, and someone suggested upgrading to Ubuntu 10.4 I have done, and still have the problem.
The error message I get is: "Unable to mount location. Failed to retrieve share list from server".
I have setup an OpenVPN server on my server box, it had been working perfectly until today. It operates on port 1194 which I am now unable to connect to (tried telnet). I have checked all the firewall rules and they still allow the port and I have also checked to ensure that OpenVPN is still listening to the port, which it's not but I have tried restarting the service and the box which dosent make any difference. The only thing that has changed is that yesterday I installed Openfire, could this have broken something?
View 1 Replies View RelatedThe wireless on this computer has worked with Ubuntu just yesterday so I know all the drivers work. The trouble is that now the wireless is turned off and the hardware switch has no effect. Is there a way to force enable it through the terminal?
View 1 Replies View RelatedI can't connect to the Internet through my wireless card. Plus, it's disabled and I can't enable it. It's grayed-out in the Network Manager on the top panel.I ran this code in a terminal:
Code:
*****@ubuntu:~$ sudo lshw -C network
[sudo] password for ******:
[code]...
I am unable to connect to my wireless network. When I click on Network manager it says under wireless "device not managed".
View 9 Replies View RelatedI am running 3 guest machines in KVM and also I have bridged the host machine so that I would be able to get the network access on the guest machines and I am getting it also, but the problem is that I am not able to ssh one guest machine from another guest machine moreover I am able to ssh the host machine from any of the guest machine.
View 1 Replies View Relatedhave read [URL] lspci | grep Wireless 10:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02
[Code]...
have read [URL] but still could not issue the problem how should I resolve my wireless isusues?
I recently installed Ubuntu 9.10 on my Dell Inspiron 1545 64-bit laptop. Before that I used Windows7. In Windows, the internet connection worked perfectly well. But after installing Ubuntu, I am unable to connect to the internet. The network-manager applet finally says that "You are disconnected". When I do the "ifconfig", I got no IP address.
So, I installed Ubuntu 9.04 in the same system. But the problem persists.
I gone through many posts in this forum but nothing was useful.
I have an external hard drive connected to my router. From Windows I can access it, but from Ubuntu I can see the hard drive, but when I try to access, I'm asked for a password. However my network does not have a password neither the hard drive.
What must I do?
I'm running ubuntu 9.10 on my desktop.Wireless networks appear on the dropdown menu but when I try to connect to my home network the authentication box appears, after typing my password the box disappears and it continues to connect but nothing happens and after a while the authentication box appears again. So.. no internetz connected.
View 7 Replies View RelatedI have this very weird problem: I'm not able to SSH to 1 specific server on the web. I can access everything, but not that specific server.
When I try to SSH, I get this code...
When I reboot to Windows, I can SSH using Cygwin. I'm using Ubuntu 10.04 Lucid and OpenSSH client 1:5.3p1-3ubuntu6.
I tried sniffing the network with Wireshark, but I cannot understand why the TCP connection cannot be set up. I'm sure it's an Ubuntu problem as I'm able to connect to that server on the same machine, but different OS.
I own an Acer Aspire 5552g. I have installed 2 systems on it: Windows 7 and ubuntu 10.10. Everything works fine except wifi. There is a lot of threads connected to this topic, but none has solved my problem yet. The problem occurs when I hibernate Windows and then load ubuntu - I get unable to turn wifi on. As rfkill says - it is hard blocked. It wouldn't be a problem if i had a hard switch for wifi. but I only have fn+F3 for that, which somehow fails to work in my situation.
Code:
igor@igor-Aspire-5552G:~$ rfkill list
1: phy1: Wireless LAN
Soft blocked: no
Hard blocked: yes
If I reboot Windows and then start ubuntu - everything's fine and working. fn+F3 turns wifi on and off as expected. I will provide some more info: when wifi's working:
Code:
igor@igor-Aspire-5552G:/sys/class/rfkill/rfkill1$ cat state
1 when it doesn't:
Code:
igor@igor-Aspire-5552G:/sys/class/rfkill/rfkill1$ cat state
2 some additional info:
Code:
igor@igor-Aspire-5552G:/$ lspci -nn
//left only network-connected info
02:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe [14e4:1692] (rev 01)
08:00.0 Network controller [0280]: Atheros Communications Inc. AR9287 Wireless Network Adapter (PCI-Express) [168c:002e] (rev 01)
I'm new to Linux, i have couple of setups like
1. RHEL5 (2.6.18-128.el5) running fine on VMware(6.5v)
2. RHEL5 (same version of ker) running on Laptop (DELL Latitude D710)
there is a wireless modem which running at home with that i was being able to access the internet from VMware image running with RHEL5.
BUT internet does not work from the laptop. Network manager are running on both VMware image and Laptop.. What is the steps i need to follow to get WiFi Enabled so that it should pick the ipaddress from Wireless Modem to get internet access to my laptop.
I switched to the b43xx (lp-phy) driver, as opposed to the broadcom STA driver which I previously had. I have dell 8312b/g lp-phy(mini) wireless card.
I have the wireless detection, but when I attempt to connect to Fios WiFi it continuously asks for my WEP (I have the correct WEP and I have typed it in correctly) and fails to connect.
I've read about the driver and firmware on linuxwireless and kernel.wireless. org.
http://pastebin.com/w44Xbgw3 (lspci -nnk output)
http://pastebin.com/C5BDhgZ9 (iwconfig output - this printed while trying to access the network)
Why is this happening? How can I fix this?
I have a Dell Mini 10v with a fresh install of latest Ubuntu Netbook Edition. I have enabled proprietary drivers in order to get the WiFi card to work and managed to connect at home, starbucks etc. Good stuff.
For some reason I can detect but not connect to the WiFi at work - I get prompted for the pword and after entering it the WiFi indicater will pulse for a while only to return to the pword prompt. yes, I have the right pword and can connect my iPhone and other laptops. I am really puzzled by this and really need to get on the WiFi at work - wired connection works.
my colleague has the same dell model with windows 7 installed and is able to connect fine - I really don't want that @@@@ installed just to get WiFi. I know password entry error is the obvious solution but I connect new windows devices to it routinely and had other people try too.
is fully two times that I install ubuntu 9.10 and in no way is to approach the moon either with wifi internet nor cable
View 1 Replies View RelatedAfter reading about Linux I decided to try it on an old HP Pavilion model 6617 desktop running Win 98 - so far with limited success!
View 10 Replies View RelatedI tried to implement the solution given at: [URL] on a Dell Inspiron 1525 laptop, running Ubuntu 11.04. However, I still can't connect to wifi.
I can see that the files were extracted inside /lib/firmware/ (I see a b43 and a b43 legacy folder).
The lspci -vnn | grep 14e4 returns:
Code:
0b:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01)
I'm fighting to make wifi work on an HP dv6-3194.
The symptom is that I'm always asked to enter the WPA passwd.
1-This is a fresh FC15 install:
Linux localhost.localdomain 2.6.38.6-26.rc1.fc15.i686.PAE #1 SMP Mon May 9 20:36:50 UTC 2011 i686 i686 i386 GNU/Linux
2- Network interfaces are detected:
3- pci card is RT3090
4- lsusb returns:
5- lsmod returns:
6- iwlist wlan0 scanning detects wifi networks without problems.
7- relevant dmesg entries:
8- wpa_supplicant.log
I've tried many suggestions from this forum about RT3090 or RT2800, but none worked :-(none seemed to be close to my problem:
Most of them relates to interface not seen, wifi networks not detected, system freeze.
I am running Ubuntu 10.10 Netbook Remix on a Toshiba Netbook NB300. After performing an upgrade I find myself unable to connect to my wirless network and have lost the wifi icon in the task bar. Ethernet connectivity is however working.
iwconfig shows:
wlan0 IEEE 802.11bgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
ifconfig shows
[Code]...
I need to take to bring back wireless connectivity to my netbook and restore the wifi icon to the task bar.
I have installed Ubuntu for netbooks on my four year old laptop and of course the wifi card is unable to search for wireless networks when I'm booted into Ubuntu. I do have the driver software on a recovery disk. Would installing it in Ubuntu fix my problems?
View 4 Replies View Related