General :: RT2500 Wifi Card Could Not Connect To Wireless Router Using WPA Personal?
Sep 19, 2009RT2500 wifi card could not connect to wireless router using WPA personal.OS - RHEL4; Dell Inspiron C600; interface detected ra0
View 12 Replies
ADVERTISEMENT
Ubuntu :: Wifi - Wireless Card Isent Detecting My Router
Mar 8, 2010My wireless card isent detecting my router even though it has detected my 3 of neighbors wifi. the only reason i thought that it may not be able to detect mine is that i use a wpa2 encrption rather then a wep like my neighbors. so i tried to go and reset my router using my other desktop and set it to a wep encryption, but for some reason my computer still did not detect it. i am using a dell dimension comnputer with both a linkseys N gigabit router model number :wrt310n and the reciving card linkseysduel band wireless N network adapter model number :wusb600n. can somebody please tell my what i am doing wrong? this is rather annoying as i have to drag my desktop and moniter out to the living room just to physically connect to my router to enable internet.
View 1 Replies View RelatedUbuntu Networking :: Wireless Card - WEP Encryption For Wireless Router Not Allow Me To Connect
May 5, 2011wlan0 Authentication capabilities :
WPA
WPA2
CIPHER-TKIP
CIPHER-CCMP
Those are my authentication capabilities, obviously. I am using a WEP encryption for my wireless router and according to this, it will not allow me to connect. Is there anyway to allow that? The wireless card works just fine in Windows, even on the same network encryption type. Using a Intel Wireless/Pro 4965 ag. Note* this is my mother's router and whatnot. She won't change it the encryption type.
OpenSUSE Wireless :: Intel 3945abg Wireless Network Card Cannot Connect To Router Automatically
Apr 8, 2010I clicked "Network Settings", and I found that the ip address was wrong, which is "192.168.1.10/24", and netmask field is empty, so I modifed the configuration file located in /etc/sysconfig/network, named ifcfg-wlan0, added one line(NETMASK= '255.255.255.0'), saved it and reboot the system. After rebooting the system, I still found the ip address is wrong and netmask field is empty, so I have to use ifup command to activate my card manually every time the system starts.
View 1 Replies View RelatedUbuntu Networking :: Tenda W322P Wireless Card Crashing Wireless Router On Connect
Jun 30, 2011I installed a Tenda W322P wireless card in my dual-boot PC running both Windows XP and Ubuntu 11.04. The card worked straight out of the box on XP, but does not function correctly under Ubuntu. My apologies for any missing/irrelevant information, I am having to post this from the Windows boot so the Ubuntu settings are not directly available at the same time as internet access.I followed the process detailed here htURL...to install and configure the driver (I believe from reading other sites that this card is the Ralink RT3062 chipset), blacklisted the original RT2860 driver that was in use (couldn't even get the card to scan for wireless networks with the default driver) and restarted the interface.
Since then, sudo iwlist scan can find my wireless router but when I attempt to connect to it, it seems to enter a loop of requesting the WEP key then pausing for a while before re-requesting the key. I know I have the key value correct because it is copied and pasted from the same text file I used to copy and paste into the passkey field on the Windows boot. Attempting to connect to the router using Ubuntu also has the rather unfortunate side-effect of crashing the wireless router, killing off all other device connections until the router has been reset.
Ubuntu Networking :: Connect WiFi Router TP-LINK TL- Wr942nd To Provide Wireless Internet To Other 2 PC
Oct 27, 2010I have a telephone connection of 1 mega internet modem huawei mt 880 SmartAX my desktop computer is connected via an ADSL PPPoE.I use Ubuntu 10.04 in Spanish and want to know how to connect a WiFi router TP-LINK TL- wr942nd to provide wireless Internet to other 2 PC, a desktop with a plaquet wireles G CNet CWP-854 and 500 series notebook olivetti olibook. The issue is that when I connect the router I can not even go online and do not know how to operate the network, I can not even connect the desktop to my internet provider
View 1 Replies View RelatedOpenSUSE Wireless :: Wifi Card Can't Connect On Network After System Hibernate?
Sep 15, 2011wifi card:atheros ar5007egOS: openSUSE11.4My laptop can't connect on network after system hibernate. It has been asking me for enter the wifi password. But when I input the wifi password it still can't connect on network. I have to reboot it.
View 3 Replies View RelatedUbuntu Networking :: Broadcom 4727 Wireless Card Cannot Connect To WiFi?
Jun 16, 2011I just installed 9.10 and I can't detect any wireless networks. Is the card compatible with 9.10? Do I need to install any drivers? If the card isn't compatible with 9.10 is it compatible with later versions of Ubuntu? Marking this as somewhat urgent as I need to get internet access for some coursework soon, and also because my parents will kill me if they find out I've done anything unusual with the laptop because it's new and they think anything non -MS is a virus.
View 9 Replies View RelatedGeneral :: Get An Arp Packet From Wireless Wifi Router?
Jun 16, 2011I am trying to get an arp packet from my wireless wifi router (access point), to which I am not connected. I simply tried ping 192.168.0.1, but the answer was connect: network is unreachable. What can I do about that?
View 1 Replies View RelatedUbuntu Networking :: Use One Wireless Router To Connect/detect To Another Wireless Router?
Aug 1, 2010My son lost his USB Wireless stick for his Computer. I had thought I heard that if you had a second wireless router, you could use it somehow to detect the wireless router you have already set up in your home (like using a wireless card)? Is this what Ad-Hoc is? Either way, can this be done and if so how? I use a WRT54Gx2 Lynksys router and have a TRENDNET TEW-432BRP wireless router and also a spare D-link DI-514. I use ubuntu 10.04, and also wanted to know if I connected one of the router to his on the LAn port could he connect msaybe through an Ad-Hoc on my local computer here? He uses XP on his. I'm a newbie to linux and networking in general.
View 2 Replies View RelatedNetworking :: Network Setup - Router - Wireless Router Card ?
Apr 24, 2010I'm having trouble getting my network set up the way that I want it/had it. You see, when I first set up my network, I just had my cable modem going directly to my standard wired router (A D-Link DI-604), which had DHCP,and was connected to all of the computers on my network. I had one switch hooked up to one of the ports of the router, but this was a regular switch, and it would not try to assign IP addresses, it would just pass through the DHCP info as I wanted.
Now however, my network setup has changed. My room mate and I both got laptops, and we decided that we wanted to have wireless access so we didn't have to constantly plug in to the router.
Now my network is set up like this: The modem is hooked up to the router(DI-604), which is hooked up on the LAN side to our computers, our switch (which is hooked up to 3 more computers), and to a wireless router card (A Gigabyte GN-BC01).
The wireless router card has two jacks for ethernet. One for WAN, and one for LAN. The LAN side we have plugged only into the computer in which the card is installed.
Now the problem is this: The wireless router card comes with DHCP by default, and it's assigning addresses to the laptops and to the computer hat it's in, and worse, the IP addresses are on a different subnet than that of the main dlink router. The Main (dlink) router assigns addresses from 192.168.0.1 (itself) to 192.168.0.254, while the wireless router card assigns addresses from 192.168.1.1 to 192.168.1.254 (itself).
Because of this, I cannot access services on the wireless network from my wired network or vice versa. The first thing I tried was setting the card to assign addresses from 192.168.0.12 to 192.168.0.253, however it just said "internal error" when I tried to do this. I decided that this may be because it sees that it was being assigned an address on it's WAN side on the same subnet. So the next thing I tried was disabling DHCP and setting the "LAN IP Address" to 192.168.0.12, hoping that the DHCP would just go through the card, like a switch. I would have set the LAN IP address to be assigned by DHCP, but this was not an option, so I decided that'd be the best thing to set it to.
Once again however, setting the LAN ip address to an address on the same subnet as that of the IP assigned to it's WAN side caused it to report an "internal error". I verified that this was the issue by setting the LAN address to several other private IP addresses to test (I.E. 10.0.0.1, 192.168.3.1, 192.168.5.12).
My question then really is: How do I set up both routers so that I can access services and computers from each network from the other network. Should I set them with different subnets and set the gateway on the wireless network to the main router? To the wireless router card? Should I put them on the same subnet? Will it know how to communicate?
Here is a link to (picture) my network diagram. Network Diagram
General :: Connect To A Wireless Router?
Mar 13, 2011I just downloaded ubuntu 10.4 today. I can't seem to figure out how to connect to the Internet.
View 7 Replies View RelatedGeneral :: Distros Will Not Connect To Wireless Router?
Jun 12, 2011There's only one thing preventing me from completely making the switch from Lose-dows to Linux: inability to connect my laptop wirelessly. I'm currently using an old IBM Thinkpad with an Intel Pentium III, 1.13 GHz with 384 megs of RAM. The wireless is through a Belkin USB dongle (model: F5D8053, v3) and a Netgear Duo Wireless-N Router (model: WNDR3300). Let's say, for sake of argument, I'm using Linux Mint Julia. It clearly must recognize the USB dongle, because it can detect all the other networks in the area, including the Netgear. But it won't connect to it, or any of the secured ones.
So what's the deal? It'll connect when connected directly, so it's not the computer. Or is it? All I know is I'll have to wait til I get an LFC interface (LFC=Long F**king Cable) before I want to connect Linux to the net.
General :: Connect A Wireless Router To Another Access Point?
Aug 19, 2011I have a complicated situation due to my goals and network structure. I have in mind a potential solution, a bridge, but I do not know whether it is feasible or what hardware it will require.
The network:
My apartment community provides residents with free Internet access through an ancient T1 line. We do not have the option of other Internet providers, so having a router and modem in the home are not an option. The T1 line is split among some 24 switches, one for each building, and each switch has one port per floor. At each floor, there is a D-link WAP, and each has a separate SSID and WEP key. Additionally, they control access at the switch level using Access Control.
My goals:
I'm used to being in control of my networked environment. I like to have friends over often, and most of them have a laptop, a smart phone, or both, which makes Access Control a pain. I don't want to have to think ahead and get their MAC addresses to the IT consultant while he's here during business hours. My wife and I have 6 devices, two of which require an Ethernet connection.
I use a few applications for streaming that utilize UDP (I'm not sure if the WAPs are smart enough to even handle this) and I don't like having my traffic muddled with my neighbors.
I should note that I tried extending the network with my Airport Extreme router, which apparently only works with other Apple devices. I've also looked into WDS, but that seems to require an unlikely amount of cooperation from the IT consultant on site.
The potential solution: a Linux server that acts as a router. Ideally, it could act as a webserver for a small static site as well, but let's focus on the routing. I'd like to bridge two NICs and use masquerading (Internet Connection Sharing). The public interface would connect to the WAP using WEP. The private interface would allow up to 8 devices to connect to the server.
It seems easy enough to configure the public interface, and even to bridge the connections. What I've never done before is purchase a wireless card that can accept multiple clients. Maybe they can all do this?
General :: Connect A Server Using Centos 4.8 Onto A Wireless Router?
Oct 6, 2010want to connect a linux server using centos 4.8 onto a wireless router. then clients will access mails/internet using the wireless router. how do l go about it. anyone with an example
View 4 Replies View RelatedUbuntu :: Get Wireless Access To WiFi Router With Xbox360 Wireless Network Adapter
Dec 10, 2010I want to try to get wireless access to the wifi router with the xbox360 wireless network adapter.Is this possible?
View 1 Replies View RelatedUbuntu :: 9.10 Wifi - Can't Connect To My Router ?
Feb 16, 2010I have been experiencing slight problems while attempting to connect to the internet via a wireless router. I can connect to my router perfectly fine on Vista and I could connect to my friends router while I was in Ubuntu, but I can't connect to my router while on Ubuntu. I've been entering the same code that will work when I'm in Vista, but it wont work while in Ubuntu.
View 7 Replies View RelatedUbuntu Networking :: See The Manufacture Of Wifi Router/card?
Sep 7, 2010Is there a way to see the manufacture of wifi router/card remotely like "inSSider" shows, for example ???
View 2 Replies View RelatedNetworking :: Get The Wireless Router To Connect To The Other Wireless Router?
Feb 16, 2009This is my basic setup:
[URL]
I don't know how to get the wireless router to connect to the other wireless router so I can use internet on my computer. How do I achieve this wireless connection?
Ubuntu Networking :: Cannot Connect To WiFi Router
Mar 15, 2011I think I have unique problem. I have a d-link DWL G510 rev c.(Austrailian) WiFi card in my pc which is detected as
Quote:
Network controller [0280]: RaLink RT2561/RT61 rev B 802.11g [1814:0302] in lspci -nn.
iwconfig shows:
Quote:
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bg ESSIDff/any
Mode:Managed Access Point: Not-Associated Tx-Power=6 dBm
Retry long limit:7 RTS thrff Fragment thrff
Power Managementff
ppp0 no wireless extensions.
Now sometimes it detects my wifi router and shows its ssid in nm-applet. but when I try to connect, it tries for 3 or 4 minutes and then fails. for most of time it even does not finds my router.
Networking :: Ubuntu 9.04 Can't Connect To Wifi With Intel Wireless WiFi Link 5100?
Aug 29, 2009I have only had a few weeks worth of experience with linux, so I'm probably considered a newbie at this but I felt like giving it a shot. I just configured my new Toshiba Satellite A505-S6969 to jaunty. Most of the transition is going well but I'm stuck with a few issues, one of which is getting my wifi to work. Right now I'm working off of an ethernet cable.spci returns
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port
[code]...
Fedora Hardware :: Connect To SpeedTouch Router Through WiFi
Jun 29, 2010I recently began using fedora (13) on my acer laptop, and at first the WiFi was fine. However, after a day, it wouldn't connect to my SpeedTouch router through WiFi (though it works fine with a cable), however, it works fine with my Philips Router WiFi.
View 1 Replies View RelatedUbuntu :: Wifi - New Router And Wouldn't Auto Connect ?
May 14, 2011We just got a new router and ubuntu wouldn't auto connect to it. When I tried to click on the network manager icon in the panel, it was all glitchy and wouldn't work. Then, I removed it from the panel thinking I could just add it on again. I was wrong. Is there any way I can unremove it?
View 3 Replies View RelatedUbuntu Networking :: RT2500 Does Not Connect
Mar 19, 2011I installed Ubuntu 10.10 on my old laptop the other day, but it seems that Wifi card is having some troubles with co-operating The wired connection works like a charm but I'd prefer wireless on the laptop....I know the laptop is an oldy (PH Easynote R1904)
Edit:
here's the LSPCI output:
Code:
00:00.0 Host bridge: VIA Technologies, Inc. CN333/CN400/PM880 Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. CN333/CN400/PM880 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. CN333/CN400/PM880 CPU Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. CN333/CN400/PM880 Host Bridge
[Code].....
Fedora Networking :: F9 And RT2500 - Card Works But No IP Address
Mar 30, 2009I have an auxillary laptop that I use with Fedora 9 on it. Up until now, I have been using wireless just fine with a an old Marvell card. A friend needed a wireless card, so I gave it to her because I had a spare Belkin card (PCMIA) with a RT2500 chipset. This chipset has been supported in Fedora for a long time, and it does it fact work but it will not obtain an IP address and disconnects from the Network Manager upon every attempt to connect.. I get an error that says "set bit rate" failed and I cannot get assigned an IP address from my router.
I do not use encryption. Nothing I have tried with sysconfig-network has had any affect.
iwlist scan finds the router just fine with a good signal, but will not connect.
Ubuntu Networking :: Wifi Router Recognised Can't Connect To Internet?
Jan 7, 2011After forgetting my wifi router password, I had to reset and reconfigure the router. I enabled WEP, and after I typed the password, the computer now recognises it automatically. But I can't connect to the internet no matter how long I wait. (The wired internet connection works fine.) How can I get the wifi to connect to the internet?
View 1 Replies View RelatedUbuntu Networking :: No Wireless Or Wifi 10.10 Following Upgraded Router?
Dec 14, 2010Upgraded broadband service yesterday and now using a combined router and modem (Virgin Media Hub). But I now have no wired or wifi internet connectivity on either of my ubuntu 10.10 systems. I tested it on my work laptop which uses Window and it works fine for wired and wifi.
With 10.10 I no longer have a network icon upper right panel to check, so not sure how to set up wireless. Both machines have static IP addresses and are able to ping each other but there is no internet connection on either.
OpenSUSE Wireless :: Connect To Wireless Router While Logged In As Root?
Jun 6, 2010I can connect to my wireless router while logged in as root, but not under my user account. I went into YAST and the user maintenance area and gave myself every permission (Add, Edit, Delete Users or Accounts), but kde network maanger will not allow me to connect to my router.
View 5 Replies View RelatedGeneral :: Unable To Connect Wireless WG511 Pcmcia Card
Oct 17, 2010I have got a netgear wireless PC Card WG511 made in Taiwan (not china). I have intalled it in windows w/acouple of ver. Settling on v1. I am first generation pc. maybe toold for Linux? I can't even figure out how to post in the Dam Small Linux website. But have read most of the posts in linux questions. I can't install a wireless card ;<( this is an old laptop and would be like usable if I get the *&^%$ wireless working. In fact, does anyone have a wireless card working with Dam Small Linux? I have the book but, it's not been much help. Other that telling me to add nodhcp in the boot startup. That didn't help either. I have learned alot through this misery of the wireless nic.
View 10 Replies View RelatedGeneral :: Windows - Connect To The Internet Through Other Computer's Wireless Ethernet Card
Apr 7, 2011there are two computer
wireless internet accessible notebook.
desktop with no wireless card (but just normal lan card).
I connect two computer with lan cable, and I want to use internet in desktop computer through the notebook's wireless lan
what kind of setting do I have to do?
desktop's OS is Ubuntu, and notebook's one are Ubuntu, Windows XP.