I need to install fuse on a debian server with kernel 2.6.9-67.0.7 that doesn't have fuse support included, and I don't know where to get it, I've found some over the internet but rpm and I would like tar gz or something like that.
View 2 Replies
I am looking for a way to do deduplication for my Virtual Machines, I found a project called OpenDudup. It looks promising, it says it needs fuse as a dependency. After looking up what fuse is, it left me with another question. What make a file system is user space different from a file system in kernel space?
View 1 Replies View RelatedRecently upgraded to F12. K3B can't burn DVDs. Drive was working fine in Fedora 10 before the upgrade, and I've applied all updates.
Here is the output when run from console:
Code:
lsof: WARNING: can't stat() fuse.gvfs-fuse-daemon file system /home/SlowCoder/.gvfs
Output information may be incomplete.
(K3bDevice::HalConnection) unlock queued for /org/freedesktop/Hal/devices/storage_model_DVD__RW_GA10N
First sec data area: 43:41:33 (LBA 196608) (402653184
[code]....
I've been trying to mount ftp on a directory, using curlftpfs, but when I run:
Code:
curlftpfs user:pass@server /mnt/mount-point
I get the error:
Code:
fuse: device not found, try 'modprobe fuse' first
And when I run it, I get:
Code:
WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
FATAL: Could not load /lib/modules/2.6.32-dyomin.1/modules.dep: No such file or directory
Code:
mknod /dev/fuse c 10 229
After that when I run the mount command ) get the error:
Code:
fuse: failed to open /dev/fuse: Operation not permitted
I have OpenSUSE 11.2 KDE edition. I download TrueCrypt 6.3a from TrueCrypt - Free Open-Source On-The-Fly Disk Encryption Software for Windows 7/Vista/XP, Mac OS X and Linux - Downloads (openSUSE - x64 (64bit) .rpm). The first problem that I encountered was dependencies; first I installed fuse using YaST then I installed the rpm file. but when I try open a volume, TrueCrypt gave me Code: fuse: device not found, try 'modprobe fuse' first. So I issue in Terminal that command but I see this error:
Code: FATAL: Could not load /lib/modules/2.6.31.5-0.1-desktop/modules.dep: No such file or directory I googled and search the forum but didn't found anything. So I thinkg only I have this problem.
I cannot get access to my external hard disk. It says as in the "SUBJECT" above. What should I do? I installed Debian XFCE testing.
View 5 Replies View RelatedI'm trying to mount a remove filesystem onto my own server. I am able to do this, however I can only access it as root, or if I chmod 777 the lot. Obviously I want to be as secure as possible, so I'd like to avoid either one of those options. Another option is to mount it directly into my home directory, but previously when I was trying out Ubuntu this caused Samba problems - and I was advised mounting in my home dir was a workaround rather than a proper fix.
I have root access with sudo on my own server. I've not set a root pasword, and until I need to I'll avoid it. I have a user account with full control over my own home directory on the remote server. I am mounting using fstab - sshfs#username@remoteserver:/media/sdk/home/username/ /media//remote/ fuse user,idmap=user 0 0
What I would like to do is without changing the permissions on the remote server change the permissions when they are mounted on my own server. I would like them to be in the group sambausers for example. Instead they are owned by root and in the group of 1024 (which I have not set). Additionally for this to work they would have to have 770 on my home server and 700 on the remote server....
i want to mount ntsf partition in rhel5 As per instructions in the net i downloaded fuse rpmsbut i am not able to instlal kdml?rpm -ivh fuse-kmdl-2.6.18-194.11.3.el5-2.7.4-8_12.el5.i686.rpmgettting the following error:
Missing Dependency: /boot/vmlinuz-2.6.18-194.11.3.el5 is needed by package fuse-kmdl-2.6.18-194.11.3.el5-2.7.4-8_12.el5.i686 (/fuse-kmdl-2.6.18-194.11.3.el5-2.7.4-8_12.el5.i686)
[code]....
I have a program that can create a fuse. For that i have to specify a mount point , like mono ccfs /mount. But how will I make /mount to be a fuse mount point? I donno whether my question sounds right or makes sense. But I want to create a fuse mount basically to provide it to the program. I dont hv any device or fs to mount initially .
View 2 Replies View RelatedI have installed three flavors of linux on vmware
1.rhel5
2.centos 5.5
3.fedora 14
and also install centos 5.5 on a separate hard disk (not on vwware).
I want to mount my pen drive on linux which is ntfs. I have tried a lot on rhel5 only. Please tell whether it is possible mount ntfs on any distributions I have mentioned above? I have already installed fuse, fuse-devel, fuse libs, ntfs-3g, ntfs-3g libs on rhel5. But I still got error:
"fatal : module fuse not found"
"ntfs unknown file system"
I need to mount NTFS drive on RHEL 5.1. I tried NTFS-3g & FUSE as well, but still getting
FATAL: Module fuse not found error.
The 486 kernel works just fine, and while I have only 1GB of RAM at the moment I hope to have 2GB someday and would like to take advantage of the dual core CPU, so I would like to configure grub to run the 686 kernel by default. For whatever reason, it runs the 486 right now and the 686 fails in a major way: there is no network connectivity at all. It could be plugged into my cable modem router and it shows no wired connections. The fact that one works and the other doesn't puzzles me since I haven't touched either since the install and a few rounds of upgrades.
I should mention I'm newbie but getting better; I managed to install debian on this x60, yet while preserving the factory install rescue & recovery partition and preserving the factory install MBR so that ibm-specific hardware functions (thinkvantage button, etc.) still work. This required me to use dd to copy the first 512 bytes of my debian partition to a file in the windows partition, etc., and modifying the windows bootloader. (I wish I had learned dd long ago--it rocks). I did this because if I ever resell the X60, the fact is most people use MS Windows and having that partition adds a perception of value to some potential buyers; not to mention I paid $ for it (I was young & stupid) so why should I delete it. I also backed up the recovery partition on another drive using dd over NFS in case the hd ever heads south.
Anyway, I've never been comfy with messing with the kernel. I did once recompile a module for ALSA because it had a bug in it for an old Yamaha integrated sound card on an old PIII and the newer version worked [alsa fails on this x60 too but I think I found a post on here that has a solution I will try later]. But I'm clueless as to networking modules, not to mention the correct module is installed already from Intel for this chipset. So what is there to do?
Here's a clue: the ifconfig output is radically different from the 686 and 486 kernels. Looks like hardware is not being detected since eth0 fails to show:
I would show the diff output below if it weren't so long--and not allowed--upon 2 text files, the first holding the output of modprobe -l under the 486 kernel and the second under the 686 kernel.
I have created a new file system (fuse) which works fine and is mounted in the local host. I want to be able to mount it from another host. I added it to /ect/exports: /mnt/ltfs *(rw,sync) And restarted nfs. Then from my client host I type:
mount -t nfs myHostName:/mnt/ltfs /mnt/data1
Where /mnt/ltfs is on my local host and /mnt/data1 is on the client host. Note that this is a "FUSE" file system so here is it's local "mount" output: ltfs on /mnt/ltfs type fuse (rw,nosuid,nodev,default_permissions,allow_other) Note thet this is of type "ltfs" but I am told that it should work like its a nfs. ltfs uses fuse under the covers.
i'm using this guide videos - howto: debian linux kernel compilation, part 1 and the author says i need kernel 2.6.26 this version of kernel doesnt longer exist in kernel.org website and the only 2.6.26 i found is a patch here. should i use the patch? or download another version of kernel?
View 2 Replies View RelatedI have rtl8187se linux driver, during installation in debian linux it tells that "the kernel is not a generic". How can i install this driver in default debian kernel (without generic)?
View 1 Replies View RelatedOn a clean install of Arch linux I edited fstab to be like so :
Code:
/dev/disk/by-id/usb-Hitachi_HTS543232L9A300_9002555dd84a21024b000000-0:0-part1 /media/EXT ntfs-3g user,rw,uid=mas,gid=users,noauto 0 0
I tried ntfs and ntfs-3g but the result is the same I can mount root but I would like to be able to mount as a user. When I try to mount as a user I get
Code:
Unprivileged user can not mount NTFS block devices using the external FUSE library. Either mount the volume as root, or rebuild NTFS-3G with integrated FUSE support and make it setuid root. Please see more information at [URL] Before installing ntfs-3g I was able to mount as a user but there was no rw permission. Any way to mount an ntfs partition as a user without suid as the message said?
We have a Dell 1850 with Debian with 2.4.18 kernel running some critical applications, now the issue is we need to upgrade the memory to 8 GB but the memory is detected by the bios itself, Operating system is not able to detect it, it is showing 3096MB of memory,
After a lot of googling and the artical in linux.com/archive/articles/119287 :: Got more than a gig of RAM and 32-bit Linux? Here's how to use it i came to know the solution i.e
1)I need to install the Bigmem-kernel to detect the ram more than 4Gb,
2) or change some kernel parameters in configuration file and rebuild the kernel
Is there any another solution for this to update operating system to detect the more RAM
We have a Dell 1850 with Debian 3.0 (woody) with 2.4.18 kernel running some critical applications, now the issue is we need to upgrade the memory to 8 GB but the memory is detected by the bios itself, Operating system is not able to detect it, it is showing 3096MB of memory. i came to know the solution i.e I need to install the Bigmem-kernel to detect the ram more than 4Gb, Any another solution for this to update operating system to detect the more RAM.
View 6 Replies View RelatedI thought the system was supposed to get through the early stages of booting without /usr so I moved it to a filesystem on my zfs-fuse pool, and created a symlink from /usr to /media/zfs/usr
On reboot it would not boot. Hitting esc to see the messages showed network-manager, avahi-daemon, and squid all failing to start (the first two before the ZFS mount success message came up, the other one after). The system was doing nothing.
Somehow, however, the system was still able to boot into the root shell of recovery mode, which I used to out /usr back on the main ext4 partition and now it's booting fine.
Should this be something I'm able to do? Are there specific parts of /usr I need to leave? Should I try to figure out how to make ZFS mounts happen even sooner than whatever the zfs-fuse package defaults to?
I am interested in working with zfs fs's and I am looking for tutorials on the subject, I am working with the Centos distro, can you send some links my way.
View 2 Replies View RelatedIn an effort to mount an NTFS partition, I'm following the tutorial here: [URL]
Since I didn't have rpmforge installed, I followed the directions here: [URL]
I'm fairly confident I followed both of these tutorials correctly. However, behold:
$ sudo /sbin/modprobe fuse
FATAL: Error inserting fuse (/lib/modules/2.6.18-128.7.1.el5/extra/fuse.ko): Invalid module format
$ uname -r
2.6.18-128.7.1.el5
I installed FUSE using fuse-2.7.4.tar.gz; but now, when I type 'modprobe fuse' in a terminal, it gives me: FATAL: Module fuse not found.
View 4 Replies View Relatedsometimes i edit files in a remote server. i normally mount the remote drive via sshfs and edit a configuration file or two and some text files using gedit. after i upgraded to 10.04 i cannot save the files that i edit anymore. i can rename the file. but the weird thing is that i cannot save the file after i edit it. one of the files that i was editing is crontab.
View 4 Replies View RelatedI have the gvfs-fuse package installed, and if I understand it correctly it should make GVFS mounts appear in ~/.gvfs.
However it doesn't, when I mount something with GVFS (e.g. my Canon digital camera using PTP), I can only access the files from Nautilus, not from command line.
I have a ~/.gvfs directory, but it remains empty.
After yum installed me fuse-ntfs-3g-2009.11.14-1.el5.rf.i386 I noticed that on one NTFS partition directories created by a normal user were writable only by root, although the user's umask was correct (0022; actually the files had root as group owner).I have a second partition mounted with exactly the same options in /etc/fstab where this problem did not occur.
/dev/hdb1 /win/d ntfs-3g uid=500,gid=500,umask=0007,nls=utf8 0 0
/dev/hda7 /win/f ntfs-3g uid=500,gid=500,umask=0007,nls=utf8 0 0
I ran a "yum downgrade fuse-ntfs-3g" and the problem was gone.Would be good to get a new version of the driver into the repos.
I have a site to download a debian5.04, install the version found in the kernel is 2.6.26-2-686, and I ask where another higher version of the kernel of debian download
View 4 Replies View RelatedI have a very specific requirement outside the typical use case of "enterprise server". If possible, I need to run a FUSE filesystem on a headless server, and share it via Samba.Physical security is a non-issue.I see two challenges with this, that Google and I have been unable to figure out: I'm assuming that in order to mount a FUSE system, a user must be logged in. (Hence the "U" in "FUSE".) So the first challenge is how to get Ubuntu to automatically login, on the physical console, to a user terminal session. (I know this can be trivially done in GNOME, but this won't have X-Windows or GNOME installed.) This has to happen automagically after boot-up; manually logging in locally or via SSH isn't an optin.Second challenge (?), how to share a FUSE file system via Samba?
View 2 Replies View RelatedI just did an update of my Debian system from lenny to squeeze as described here. I got some errors during the install, saying that glibc couldn't be updated. I did an apt-get -f install, which gives me the following warning: WARNING: this version of the GNU libc requires kernel version 2.6.18 or later. Please upgrade your kernel before installing glibc.
The installation of a 2.6 kernel could ask you to install a new libc first, this is NOT a bug, and should NOT be reported. In that case, please add lenny sources to your /etc/apt/sources.list and run: apt-get install -t lenny linux-image-2.6 Then reboot into this new kernel, and proceed with your upgrade dpkg: error processing /var/cache/apt/archives/libc6_2.10.2-2_i386.deb (--unpack): subprocess new pre-installation script returned error exit status 1 Errors were encountered while processing:
[Code]...
I'm trying to install s3fs but get a configuration warning saying that the current version of s3fs requires fuse 2.8.4 or greater. when I run pkg-config I see that fuse is 2.7.x.I downloaded the source for 2.8.5, configured, make, make installed and it appears to have correctly built the 2.8.5 libraries in /usr/local/lib but after running 'modprobe fuse' and ldconfig with the correct directory settings, pkg-config still says that 2.7.x is the active version and the s3fs configuration see barks about needing 2.8.4 or higher
How do I get the newly compiled version of fuse to be the one the system uses?I want to use s3fs to rsync my sever to Amazon S3.I'm running CENTOS 5.5 i686 standard and have cPanel installed on the machine.
I recently installed debian squeeze 32bit on a second partition of my amd athlon 64 X2 dual core machine.Currently it is using linux-image-2.6.32-trunk-686 kernel.But linux-image-2.6.32-trunk-amd64 is available.on the repository.Is it a 64bit kernel or 32bit kernel optimized for amd64 architecture?
View 12 Replies View Related
