Software :: Upgrading Fuse In Order To Use Current Version Of S3fs
Feb 24, 2011
I'm trying to install s3fs but get a configuration warning saying that the current version of s3fs requires fuse 2.8.4 or greater. when I run pkg-config I see that fuse is 2.7.x.I downloaded the source for 2.8.5, configured, make, make installed and it appears to have correctly built the 2.8.5 libraries in /usr/local/lib but after running 'modprobe fuse' and ldconfig with the correct directory settings, pkg-config still says that 2.7.x is the active version and the s3fs configuration see barks about needing 2.8.4 or higher
How do I get the newly compiled version of fuse to be the one the system uses?I want to use s3fs to rsync my sever to Amazon S3.I'm running CENTOS 5.5 i686 standard and have cPanel installed on the machine.
I've been trying to mount ftp on a directory, using curlftpfs, but when I run:
Code:
curlftpfs user:pass@server /mnt/mount-point
I get the error:
Code:
fuse: device not found, try 'modprobe fuse' first
And when I run it, I get:
Code:
WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. FATAL: Could not load /lib/modules/2.6.32-dyomin.1/modules.dep: No such file or directory
Code:
mknod /dev/fuse c 10 229
After that when I run the mount command ) get the error:
Code:
fuse: failed to open /dev/fuse: Operation not permitted
I have OpenSUSE 11.2 KDE edition. I download TrueCrypt 6.3a from TrueCrypt - Free Open-Source On-The-Fly Disk Encryption Software for Windows 7/Vista/XP, Mac OS X and Linux - Downloads (openSUSE - x64 (64bit) .rpm). The first problem that I encountered was dependencies; first I installed fuse using YaST then I installed the rpm file. but when I try open a volume, TrueCrypt gave me Code: fuse: device not found, try 'modprobe fuse' first. So I issue in Terminal that command but I see this error:
Code: FATAL: Could not load /lib/modules/2.6.31.5-0.1-desktop/modules.dep: No such file or directory I googled and search the forum but didn't found anything. So I thinkg only I have this problem.
Recently upgraded to F12. K3B can't burn DVDs. Drive was working fine in Fedora 10 before the upgrade, and I've applied all updates.
Here is the output when run from console:
Code:
lsof: WARNING: can't stat() fuse.gvfs-fuse-daemon file system /home/SlowCoder/.gvfs Output information may be incomplete. (K3bDevice::HalConnection) unlock queued for /org/freedesktop/Hal/devices/storage_model_DVD__RW_GA10N First sec data area: 43:41:33 (LBA 196608) (402653184
I'm looking at running -current instead of 13.1, and wondering about 'upgrading' to -current, as well as running multi-lib. I found the following procedures from another post of about a year ago, but I'm not sure from what directory to run such a script:
Should the procedures above work for me? and although I know that things may occasionally break here and there (and get fixed too), are there any known issues right now that would break things on my machine?
I am writing this because I want to keep all of the things that I have now on my ubuntu 10. 4 computer and do not want to upgrade until I have some way of keeping all of the things that I currently have on it.Sohow so I make this happen? Should I try to load these program settings on a flash drive?
after i update to -current a few days ago. my slack partition cannot be mounted...and after that it's show 'kernel panic'.before i experience that problem, i have encounter an odd problem after i update my slack to -current, after i lock my screen and i want to unlock it, i cannot unlock it, it says 'i must kill kscreenlocker manually'. After that i reboot using root account. then i cannot enter my slackware again.kernel panic in boot screen.Kernel panic: VFS : Unable to mount root fs (8,2)
I currently have a server that is running on the Linux kernel 2.6.18-128.7.1.el5xen and I was wondering if it was possible to upgrade it to a new official Red Hat non-xen kernel(currently 2.6.37.1).What is unique about this kernel is that it is NOT a virtual system kernel but an older XEN kernel with proprietary material removed.If it is possible I was wondering about any repercussions that may occur as a result of said update. This would include, any issues with potential data/driver losses as well as recovery procedures that may be used if something would happen to it during the upgrade.
The output from the first command was "sudo: /ect/init.d/gdm: command not found" How can I downgrade, also is it because im running lucid, not karmic koala?
When a new version of open box comes out. If compile a newer version of open box will it install over the current version or will it install a separate version?
Which is the current stable version of kernel in fedora 10 and how can I installed because right now I have unstable kernel: uname -a Linux blind 2.6.29.3-60.fc10.x86_64 #1 SMP Sat May 9 04:18:14 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
I just want to get back to latest stable kernel of fedora 10. I'm not able from the grub to choose an older because there are only kernels for fedora 9. The problem was that previously I used fedora 9 however I upgrade it but it was still with kernel of fedora 9 so I pick it the unstable of fedora 10 and I installed it. Right now I just want to get back to current version of kernel in fedora 10 so I can upgrade it to fedora 11.
i have a live cd i had sent to my address a while back but now i am outdated and would like to upgrade to the current version. is there any commands i can run to upgrade? or will i need to order another live cd
A friend installed Ubuntu 8.4 for me. I tried to upgrade to the current new version but it will stop at one point and say," Failed to fetch compiz-plugins_0.8.4-0ubuntu15_i386.deb. Hash Sum mismatch" and stop. I can separately download that very same file but it won't do it by itself.
how do I get it to work? I am just a windows user trying to learn to get away from Windows. This has been bothering me for the past ten days and each attempt ends at the same point.
I have Fedora 11 on my machine. It comes with gcc 4.5. However, I am trying to compile code that require gcc 4.1. How do I install gcc 4.1 on my machine and still have 4.5 there as well? and how do I uninstall 4.5 gcc if I need. I was trying to use yum, but it did not work. Not sure what package I need.
Thinking of installing openSuSE on my laptop and wondering how the upgrade process is. I know 12.1 is coming out in only a couple of months. I don't really want to spend all my time customizing 11.4 and then find out a straight upgrade is very buggy or even not possible and have to reinstall.
I am just a fresh starter at Ubuntu so I ask you for some comprehension and to answer my question about a problem I have. I had started upgrading Ubuntu from 10.10 to 11.04, everything went fine until a message appeared saying:
Failed to fetch [URL]...untu1_i386.deb 404 Not Found Failed to fetch [URL]...untu3_i386.deb 404 Not Found Failed to fetch [URL]...3.11-1_all.deb 404 Not Found Failed to fetch [URL]...untu1_i386.deb 404 Not Found Failed to fetch [URL]..._1.0.3_all.deb 404 Not Found Failed to fetch [URL]..._1.0.3_all.deb 404 Not Found
Then I had to close the upgrading process because of that message I tried again but it came out with the same result.
Where are the kernel headers for the current kernel of F12KDE? I am trying to configure VMWare player on my machine, and on initial startup I got an error message.
I want to do some modules development in fedora 11, by the command uname -r, I get the current kernel running in my system.
Code: $ uname -r 2.6.30.10-105.2.23.fc11.i686.PAE But when I run the following command
Code: # yum install kernel-devel the package what I installed is kernel-devel-2.6.30.10-105.2.23.fc11.i586 and kernel development directory is /usr/src/kernels/2.6.30.10-105.2.23.fc11.i586
So,the modules I developed can't insert to current running kernel because current is i686 and the compile environment is i586. Is that a bug of fedora 11?
Is it possible to upgrade from stock version 2.3 to current 2.32 using YAST? I can see 2.32 when using a browser to look at the repository, but when I enter the repository as a software source in YAST, it does not show up in YAST. What steps am I missing? Can I use YAST, or should I just download the RPMs and go from there by hand?
I just tried to install lightning and it complained that I wasn't running the right/latest version of TB so I added the Mozilla repository, ran a check and nothing. So I checked out the Mozilla site and they have a version 6 for download. Why does Suse not want to update from the current version 3?
Just a reminder, Firefox 3.0 will reach End of Life status with the upcoming release of Firefox 3.0.19. This may concern you if you are still on Jaunty (like me). You may want to search the forum on how to add the repository for a current version of Firefox or Opera. Anybody who knows what Canonical will do in such a situation if a critical bug shows up after Firefox 3.0 will no longer be supported, but Jaunty still is supported?
I have Ubuntu Server 10.04 Lucid (LTS) installed on my server (EC2 instance). I'd like to install Memcached on it. When I type "sudo apt-get install memcached" I get version 1.4.2-1ubuntu3 installed.
I know there's a newer version 1.4.5 and looking at [URL]..I found it's available in the newer version of Ubuntu (Maverick). Question: is it possible to get the newer version 1.4.5 using apt-get on my current server?
