Ubuntu :: Mount FTP Directory - Fuse: Failed To Open /dev/fuse: Operation Not Permitted
Oct 4, 2010
I've been trying to mount ftp on a directory, using curlftpfs, but when I run:
Code:
curlftpfs user:pass@server /mnt/mount-point
I get the error:
Code:
fuse: device not found, try 'modprobe fuse' first
And when I run it, I get:
Code:
WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
FATAL: Could not load /lib/modules/2.6.32-dyomin.1/modules.dep: No such file or directory
Code:
mknod /dev/fuse c 10 229
After that when I run the mount command ) get the error:
Code:
fuse: failed to open /dev/fuse: Operation not permitted
I have OpenSUSE 11.2 KDE edition. I download TrueCrypt 6.3a from TrueCrypt - Free Open-Source On-The-Fly Disk Encryption Software for Windows 7/Vista/XP, Mac OS X and Linux - Downloads (openSUSE - x64 (64bit) .rpm). The first problem that I encountered was dependencies; first I installed fuse using YaST then I installed the rpm file. but when I try open a volume, TrueCrypt gave me Code: fuse: device not found, try 'modprobe fuse' first. So I issue in Terminal that command but I see this error:
Code: FATAL: Could not load /lib/modules/2.6.31.5-0.1-desktop/modules.dep: No such file or directory I googled and search the forum but didn't found anything. So I thinkg only I have this problem.
I have a program that can create a fuse. For that i have to specify a mount point , like mono ccfs /mount. But how will I make /mount to be a fuse mount point? I donno whether my question sounds right or makes sense. But I want to create a fuse mount basically to provide it to the program. I dont hv any device or fs to mount initially .
Recently upgraded to F12. K3B can't burn DVDs. Drive was working fine in Fedora 10 before the upgrade, and I've applied all updates.
Here is the output when run from console:
Code:
lsof: WARNING: can't stat() fuse.gvfs-fuse-daemon file system /home/SlowCoder/.gvfs Output information may be incomplete. (K3bDevice::HalConnection) unlock queued for /org/freedesktop/Hal/devices/storage_model_DVD__RW_GA10N First sec data area: 43:41:33 (LBA 196608) (402653184
I'm trying to mount a remove filesystem onto my own server. I am able to do this, however I can only access it as root, or if I chmod 777 the lot. Obviously I want to be as secure as possible, so I'd like to avoid either one of those options. Another option is to mount it directly into my home directory, but previously when I was trying out Ubuntu this caused Samba problems - and I was advised mounting in my home dir was a workaround rather than a proper fix.
I have root access with sudo on my own server. I've not set a root pasword, and until I need to I'll avoid it. I have a user account with full control over my own home directory on the remote server. I am mounting using fstab - sshfs#username@remoteserver:/media/sdk/home/username/ /media//remote/ fuse user,idmap=user 0 0
What I would like to do is without changing the permissions on the remote server change the permissions when they are mounted on my own server. I would like them to be in the group sambausers for example. Instead they are owned by root and in the group of 1024 (which I have not set). Additionally for this to work they would have to have 770 on my home server and 700 on the remote server....
I have created a new file system (fuse) which works fine and is mounted in the local host. I want to be able to mount it from another host. I added it to /ect/exports: /mnt/ltfs *(rw,sync) And restarted nfs. Then from my client host I type:
mount -t nfs myHostName:/mnt/ltfs /mnt/data1
Where /mnt/ltfs is on my local host and /mnt/data1 is on the client host. Note that this is a "FUSE" file system so here is it's local "mount" output: ltfs on /mnt/ltfs type fuse (rw,nosuid,nodev,default_permissions,allow_other) Note thet this is of type "ltfs" but I am told that it should work like its a nfs. ltfs uses fuse under the covers.
I am running Ubuntu 9.10 Karmic Koala, and I am having problems with GDB. When I attempt to debug a C program in kdbg or codeblocks, the output terminal will display this message: "warning: GDB: Failed to set controlling terminal: Operation not permitted" I have searched quite a bit and I have not found a fix that works.
I am running the latest stable versions of all my software supplied by the ubuntu repositories My system meets all the dependencies for KDBG and Codeblocks
I am running gnome, but the KDE files installed by Synaptic are version 3.5.10 I have KDBG version 2.1.1 I have GDB version 7.0-0ubuntu1 I have CodeBlocks 8.02-0ubuntu4
If anybody needs any more information in order to give ideas or knowledge on how to fix this just let me know
After upgrading to Debian 8, I'm having a bit of trouble with systemd, since I'm not used to it (seeing as it was all init when I started). I tried to use a tutorial to create a new service and one step in it was to run
Code: Select allsystemctl enable xxx.service
Unfortunately, every time I run systemctl - even without parameters - I get this error:
Code: Select allFailed to get D-Bus connection: Operation not permitted
i have written one backup script in linux workstation.The backup script will do zipping files and moved to the backup directory(i,e /net/ts-bcn/sb_backup/sand). while moving zipped files to the backup directory i am getting some error like this #error:mv:failed to preserve ownership /net/ts-bcn/sb_backup/sand operation not permitted. i am getting the file owner and group owner as nfsnobody for the zipped files.
I updated my lucid alpha testing (64 bit)install after which I am unable to boot into any of my Ubuntu installs(sda11 has a dedicated Burg partition and sda10 has the stable karmic (32 bit)install and sda9 has the testing lucid install) Now I am trying to recover (rewrite Burg or at least grub2 on the MBR) my installs
This is what happens custom@custom:~$ sudo mount /dev/sda10 /mnt custom@custom:~$ sudo mount -o bind /dev /mnt/dev custom@custom:~$ chroot/mnt
[code]....
i tried a slightly different code with little success
custom@custom:~$ sudo mount /dev/sda10 /mnt mount: /dev/sda10 already mounted or /mnt busy mount: according to mtab, /dev/sda10 is already mounted on /mnt
[code]....
I also ran a whereis for bash and it also is there
I followed the steps in the wiki shown here: [URL] But when I try to mount an ntfs drive I get an error insisting the fuse module isn't installed. I try to modprobe fuse and it says there is no fuse module.
Yum confirms that : Package fuse-2.7.4-1.el5.rf.i386 already installed and latest version Package fuse-ntfs-3g-2009.4.4-2.el5.rf.i386 already installed and latest version Package dkms-2.0.20.4-1.el5.rf.noarch already installed and latest version Package dkms-fuse-2.7.4-1.nodist.rf.noarch already installed and latest version Package kernel-xen-devel-2.6.18-128.1.10.el5.i686 already installed and latest version
I am trying to create a jailed shell for a user Don($UID '500') using my own method(I don't want to use any ready-made "jailkit"). The user don should get a home directory /jail/don instead of /home/don when he login via SSH (So that he will not able to see any other files/directories on the system)
This is what I have done.
Quote:
Code:
It works without any issue ....Home directory changes to /jail/don when I ssh to the system as user don. ie: #ssh don@192.168.0.66
Then I added a chroot command to this code.
Code:
Unfortunately , now I am getting an error message saying that "chroot: cannot change root directory to /jail: Operation not permitted" .. I am not sure how to rectify this error... Is my approach correct to get a jailed shell using /etc/profile file ?
I thought the system was supposed to get through the early stages of booting without /usr so I moved it to a filesystem on my zfs-fuse pool, and created a symlink from /usr to /media/zfs/usr
On reboot it would not boot. Hitting esc to see the messages showed network-manager, avahi-daemon, and squid all failing to start (the first two before the ZFS mount success message came up, the other one after). The system was doing nothing.
Somehow, however, the system was still able to boot into the root shell of recovery mode, which I used to out /usr back on the main ext4 partition and now it's booting fine.
Should this be something I'm able to do? Are there specific parts of /usr I need to leave? Should I try to figure out how to make ZFS mounts happen even sooner than whatever the zfs-fuse package defaults to?
I am interested in working with zfs fs's and I am looking for tutorials on the subject, I am working with the Centos distro, can you send some links my way.
have a simple program attached below. I login as root, compiled and ran setgid_test.c as root also. The program simply tries to copy a file "seed_file" to a new "test_file". The new "test_file" should have user id: 40088, group id "40000". When I ran a.out, setuid() worked, but setgid() failed. I have to have this work, because I always login to a root, but will create files with different uids and gids to test a quota system.Please note that both uid and gid I used are valid. I have NIS client setup properly.[root@rtplab101 sunp]# ypcat passwd|grep 40088 |grep 40000dvt_usr40088:aK5r4VXKZIBUo:40088:40000:quota_testing:/:/bin/cshMy Linux client is running RedHat 5, Linux 2.6.18-92.el5PAE
sometimes i edit files in a remote server. i normally mount the remote drive via sshfs and edit a configuration file or two and some text files using gedit. after i upgraded to 10.04 i cannot save the files that i edit anymore. i can rename the file. but the weird thing is that i cannot save the file after i edit it. one of the files that i was editing is crontab.
I have the gvfs-fuse package installed, and if I understand it correctly it should make GVFS mounts appear in ~/.gvfs.
However it doesn't, when I mount something with GVFS (e.g. my Canon digital camera using PTP), I can only access the files from Nautilus, not from command line.
I need to install fuse on a debian server with kernel 2.6.9-67.0.7 that doesn't have fuse support included, and I don't know where to get it, I've found some over the internet but rpm and I would like tar gz or something like that.
I have a very specific requirement outside the typical use case of "enterprise server". If possible, I need to run a FUSE filesystem on a headless server, and share it via Samba.Physical security is a non-issue.I see two challenges with this, that Google and I have been unable to figure out: I'm assuming that in order to mount a FUSE system, a user must be logged in. (Hence the "U" in "FUSE".) So the first challenge is how to get Ubuntu to automatically login, on the physical console, to a user terminal session. (I know this can be trivially done in GNOME, but this won't have X-Windows or GNOME installed.) This has to happen automagically after boot-up; manually logging in locally or via SSH isn't an optin.Second challenge (?), how to share a FUSE file system via Samba?
I am looking for a way to do deduplication for my Virtual Machines, I found a project called OpenDudup. It looks promising, it says it needs fuse as a dependency. After looking up what fuse is, it left me with another question. What make a file system is user space different from a file system in kernel space?
i want to mount ntsf partition in rhel5 As per instructions in the net i downloaded fuse rpmsbut i am not able to instlal kdml?rpm -ivh fuse-kmdl-2.6.18-194.11.3.el5-2.7.4-8_12.el5.i686.rpmgettting the following error:
Missing Dependency: /boot/vmlinuz-2.6.18-194.11.3.el5 is needed by package fuse-kmdl-2.6.18-194.11.3.el5-2.7.4-8_12.el5.i686 (/fuse-kmdl-2.6.18-194.11.3.el5-2.7.4-8_12.el5.i686)
After yum installed me fuse-ntfs-3g-2009.11.14-1.el5.rf.i386 I noticed that on one NTFS partition directories created by a normal user were writable only by root, although the user's umask was correct (0022; actually the files had root as group owner).I have a second partition mounted with exactly the same options in /etc/fstab where this problem did not occur.
I have installed three flavors of linux on vmware 1.rhel5 2.centos 5.5 3.fedora 14 and also install centos 5.5 on a separate hard disk (not on vwware).
I want to mount my pen drive on linux which is ntfs. I have tried a lot on rhel5 only. Please tell whether it is possible mount ntfs on any distributions I have mentioned above? I have already installed fuse, fuse-devel, fuse libs, ntfs-3g, ntfs-3g libs on rhel5. But I still got error: "fatal : module fuse not found" "ntfs unknown file system"
I'm trying to install s3fs but get a configuration warning saying that the current version of s3fs requires fuse 2.8.4 or greater. when I run pkg-config I see that fuse is 2.7.x.I downloaded the source for 2.8.5, configured, make, make installed and it appears to have correctly built the 2.8.5 libraries in /usr/local/lib but after running 'modprobe fuse' and ldconfig with the correct directory settings, pkg-config still says that 2.7.x is the active version and the s3fs configuration see barks about needing 2.8.4 or higher
How do I get the newly compiled version of fuse to be the one the system uses?I want to use s3fs to rsync my sever to Amazon S3.I'm running CENTOS 5.5 i686 standard and have cPanel installed on the machine.
I keep getting messages that I need to update fuse gnome-screensaver and gnutils security updates. However, everytime I try to update either by YAST Online Update or the toolbar icon, it fails to update. The message is that can't remove fuse, gnutls, etc.
I just noticed the iFuse project, which aims to create fuse support for iPod Touch and iPhone. I also found an openSuse repository from which to download it, but I'm not too sure if I know how to use it. Any hints on how to test fuse mounts?
