I have the gvfs-fuse package installed, and if I understand it correctly it should make GVFS mounts appear in ~/.gvfs.
However it doesn't, when I mount something with GVFS (e.g. my Canon digital camera using PTP), I can only access the files from Nautilus, not from command line.
I have a ~/.gvfs directory, but it remains empty.
Recently upgraded to F12. K3B can't burn DVDs. Drive was working fine in Fedora 10 before the upgrade, and I've applied all updates.
Here is the output when run from console:
Code:
lsof: WARNING: can't stat() fuse.gvfs-fuse-daemon file system /home/SlowCoder/.gvfs
Output information may be incomplete.
(K3bDevice::HalConnection) unlock queued for /org/freedesktop/Hal/devices/storage_model_DVD__RW_GA10N
First sec data area: 43:41:33 (LBA 196608) (402653184
[code]....
setup consist of three machines: 2 servers (A and B)(ubuntu) and my local laptop Server A is a company controlled server which holds project data Server B is our office local server, which we use for development purposes. The problem occurs when i ssh from my local laptop to server B. After loggin in, i execute a script to transfer data from A to B. This script mounts server A using gvfs-mount. It fails to mount completely and gives me the following error
Code:
Error mounting location: volume doesn't implement mount
However if i log onto server B, using the servers keyboard and monitor (using a gnome session) i can execute the line. To verify that it's something related to the ssh login, i tried the following: (My local laptop is also running ubuntu) from laptop open a terminal. See the gvfs mount work as expected. open another terminal and ssh localhost tried to execute gvfs-mount from the local ssh session and i get the above mentioned error. After googling a bit, i found that it might related to dbus (which i know _nothing_ about) and i tried
Code:
dbus-launch gvfs-mount and then tried to gvfs-mount server A, but it fails again.
I've been trying to mount ftp on a directory, using curlftpfs, but when I run:
Code:
curlftpfs user:pass@server /mnt/mount-point
I get the error:
Code:
fuse: device not found, try 'modprobe fuse' first
And when I run it, I get:
Code:
WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
FATAL: Could not load /lib/modules/2.6.32-dyomin.1/modules.dep: No such file or directory
Code:
mknod /dev/fuse c 10 229
After that when I run the mount command ) get the error:
Code:
fuse: failed to open /dev/fuse: Operation not permitted
I have OpenSUSE 11.2 KDE edition. I download TrueCrypt 6.3a from TrueCrypt - Free Open-Source On-The-Fly Disk Encryption Software for Windows 7/Vista/XP, Mac OS X and Linux - Downloads (openSUSE - x64 (64bit) .rpm). The first problem that I encountered was dependencies; first I installed fuse using YaST then I installed the rpm file. but when I try open a volume, TrueCrypt gave me Code: fuse: device not found, try 'modprobe fuse' first. So I issue in Terminal that command but I see this error:
Code: FATAL: Could not load /lib/modules/2.6.31.5-0.1-desktop/modules.dep: No such file or directory I googled and search the forum but didn't found anything. So I thinkg only I have this problem.
When I use nautilus open my home directory, everything is OK except that the file contents in the home directory are not presented. It seems that nautilus is still waiting and busy.
After that, I try to enter the user's home directory by the Terminal and succeed. I can use 'ls' to display the file in the home directory, But when I use 'ls -a' to print the hiden files, again the Terminal seem to be lock. the 'ls -a' is locked, I fail to 'kill' it.
At last, I find that everything that connects to the behavior which need to enter, delete or just dsplay the /home/$USER/.gvfs will fail and lock, and without any error message.
I'm using 'Adobe Flash plug-in 10.3.183.4ubuntu0.11.04.1', installed from the package repos on kubuntu, and since the last update, it has broken all flash functionality in both rekonq and firefox.I have tried removing and reinstalling the package multiple times, both with and without the browsers open. Can anyone suggest a way to restoring functionality?
View 7 Replies View Relatedhow to make creative web cam working with ubuntu
View 1 Replies View RelatedWhen I installed my 64 bit system of Ubuntu 10.04 the sound worked very well and I were very happy. The problem started however when I installed Skype which uses pulseaudio. As soon as I start skype (or any other application that uses pulse, HoN for example) the applications sound output or input does not work at all. If I have pulseaudio started in some way, applications that I suppose do not use it like spotify or flash player stops to produce sounds. And when I type "pulseaudio" in the terminal it gives me this:
[Code]...
I'm having trouble getting compiz to work on my Laptop. It worked for a while and then I turned on Shift Switcher and a message popped up saying..."The new value for the button binding for the action Terminate in plugin Shift Switcher conflicts with the action Zoom Window of the Scale Addons plugin. Do you wish to disable Zoom Window in the Scale Addons plugin?" I was given the option of Set Terminate anyway, Don't set Terminate, and Disable Zoom Window. I clicked Don't set Terminate and ever since the only thing that works in compiz are the bindings in the general options. I've used synaptic to completely remove and then reinstall compiz but the problem persist. Something else weird, all of the changes I made are still there, even after complete removal, but they don't work?
View 2 Replies View RelatedWhen I try to hibernate, the computer just goes to a blank, black screen and doesn't turn off. I have to hold the power button to get it to shut down, and when I turn it back on none of the programs running before hibernation have been saved.
View 8 Replies View RelatedI just recently (about an hour ago) installed Ubuntu Netbook edition on my old laptop, and I was greeted with the message, that unity could not be run due to some sort of missing driver...fair enough, I was then greeted with the default Ubuntu desktop, I installed all my needed software (wine, google chrome) and installed the missing display drivers. I then rebooted the system, and once again I am stuck with the default desktop, and not the Unity interface. I checked the software center, and it says Unity IS in fact installed.. And yet I cannot make it appear. So now I ask you Ubuntu veterans. How do I make it work?
P.S. I wiped the system of windows, and the computer is an old HP Pavilion DV6000
I thought the system was supposed to get through the early stages of booting without /usr so I moved it to a filesystem on my zfs-fuse pool, and created a symlink from /usr to /media/zfs/usr
On reboot it would not boot. Hitting esc to see the messages showed network-manager, avahi-daemon, and squid all failing to start (the first two before the ZFS mount success message came up, the other one after). The system was doing nothing.
Somehow, however, the system was still able to boot into the root shell of recovery mode, which I used to out /usr back on the main ext4 partition and now it's booting fine.
Should this be something I'm able to do? Are there specific parts of /usr I need to leave? Should I try to figure out how to make ZFS mounts happen even sooner than whatever the zfs-fuse package defaults to?
I have this annoying problem since day one.I am testing out Red Hat RHEL5, everything is fine except DNS look up.If I ping www.google.com, it doesn't work, ping ip address it all works;if I bring up browser, put www.google.com it doesn't work, can't find the name, however, simply put ip address there it works.My DNS seeting seems ok, and the DNS works from Windows box.
View 2 Replies View Relatedi have tried mail function in php to send email from the local host its work for yahoo but not with HOTMAIL whay ! actually i tried to figure it out,
View 1 Replies View RelatedI installed FUSE using fuse-2.7.4.tar.gz; but now, when I type 'modprobe fuse' in a terminal, it gives me: FATAL: Module fuse not found.
View 4 Replies View Relatedsometimes i edit files in a remote server. i normally mount the remote drive via sshfs and edit a configuration file or two and some text files using gedit. after i upgraded to 10.04 i cannot save the files that i edit anymore. i can rename the file. but the weird thing is that i cannot save the file after i edit it. one of the files that i was editing is crontab.
View 4 Replies View RelatedI have this:
Code:
root@MyDesktop:/home/username# ls -lisa
ls: cannot access .gvfs: Permission denied
[code]....
I am interested in working with zfs fs's and I am looking for tutorials on the subject, I am working with the Centos distro, can you send some links my way.
View 2 Replies View RelatedI have a very specific requirement outside the typical use case of "enterprise server". If possible, I need to run a FUSE filesystem on a headless server, and share it via Samba.Physical security is a non-issue.I see two challenges with this, that Google and I have been unable to figure out: I'm assuming that in order to mount a FUSE system, a user must be logged in. (Hence the "U" in "FUSE".) So the first challenge is how to get Ubuntu to automatically login, on the physical console, to a user terminal session. (I know this can be trivially done in GNOME, but this won't have X-Windows or GNOME installed.) This has to happen automagically after boot-up; manually logging in locally or via SSH isn't an optin.Second challenge (?), how to share a FUSE file system via Samba?
View 2 Replies View RelatedWhen I plug in my digital camera, it mounts it as a gvfs-mount. I have a few problems with this:
- It takes 2 times: I have to plug it in, wait, unplug it, plug it back in before it shows on the desktop
- Don't have command line access: Nothing in ~/gvfs after mount and I cant do anything with gphoto2://[usb....]
- Cant access it from another desktop instance: gvfs-mount -l lists it when I'm on a terminal on the desktop, but not when I'm ssh'ed into the system.
Really I just want to mount, rsync photos for backup, unmount and be done with it (all this in 3 lines of a shell script that I'll add to udev so its fired when ever the camera is plugged in)
dmesg: usb 1-5: new high speed USB device using ehci_hd and address 8. Configuration #1 chosen from 1 choice
lsusb: Bus 001 Device 008: ID 04a9:3176 Canon, Inc. PowerShot A590
How can I mount it as a normal mount (perhaps something that automatically shows up in /media or something).
I installed ifuse (a utility to mount your iPhone or iPod touch via the USB cable) and I want this to be the default way my iPhone is mounted when I connect it. Currently, when I connect it, it gets mounted by the gvfs (Gnome virtual file system) at ~/.gvfs/iPhone. Either one change should be made (the 'default command to execute when this device is connected') or two changes (tell gvfs not to mount, and tell ifuse to automount). I don't know how I can get this to work.
View 5 Replies View Related-Lucid Lynx
-Likewise-open to connect to an AD
-add all network shares to the nautilus favourite places
-our script is working fine if you are running the script manually from an opened session
-it's not working when placed in /etc/profile.d
What the script is doing:
-reading the .bat script name from the AD using the user login
-mounting the netlogon share
-reading the content of the netlogon script
-finding the network share names and adding them to the nautilus favourite places
What is failing: it does not mount the netlogon share using gvfs-mount Maybe because it's run too early in the process? note that a new user may log in any time, and we want this to be entirely automatic. So we cannot put the script in /home/login/*, as the home is not created yet at first login.
I need to install fuse on a debian server with kernel 2.6.9-67.0.7 that doesn't have fuse support included, and I don't know where to get it, I've found some over the internet but rpm and I would like tar gz or something like that.
View 2 Replies View RelatedIn an effort to mount an NTFS partition, I'm following the tutorial here: [URL]
Since I didn't have rpmforge installed, I followed the directions here: [URL]
I'm fairly confident I followed both of these tutorials correctly. However, behold:
$ sudo /sbin/modprobe fuse
FATAL: Error inserting fuse (/lib/modules/2.6.18-128.7.1.el5/extra/fuse.ko): Invalid module format
$ uname -r
2.6.18-128.7.1.el5
I am having a problem with a script I am developing to restore a profile from a snapshot. It is part of a deployment strategy for patron computers at our county library. Every night I run the script to restore the "guest" account from a a preset snapshot. Basically this is what the script does:
1 Kill the guest login session if logged in
2 Copy Firefox places.sqlite to backup # preserve for audit trail
3 Remove /.backup/guest.Backup # previous CYA copy of guest account
4 Move /home/guest to /.backup/guest.Backup # New CYA backup of guest
5 Un tar snapshot of guest to /home/guest
6 Copy saved Firefox places.sqlite from step 2 to guest account
The problem I am having is I am getting an error:
rm: cannot remove `/.backup/guest.Backup/.gvfs': Is a directory
What is the best approach here. I wouldn't think killing the gvfs-fuse-daemon is the solution. I think I just want to temporarily disable it to the restore and prevent the error being generated. I want to get this script ironed out, because I want to deploy this on about 15 workstations.
I am looking for a way to do deduplication for my Virtual Machines, I found a project called OpenDudup. It looks promising, it says it needs fuse as a dependency. After looking up what fuse is, it left me with another question. What make a file system is user space different from a file system in kernel space?
View 1 Replies View Relatedi want to mount ntsf partition in rhel5 As per instructions in the net i downloaded fuse rpmsbut i am not able to instlal kdml?rpm -ivh fuse-kmdl-2.6.18-194.11.3.el5-2.7.4-8_12.el5.i686.rpmgettting the following error:
Missing Dependency: /boot/vmlinuz-2.6.18-194.11.3.el5 is needed by package fuse-kmdl-2.6.18-194.11.3.el5-2.7.4-8_12.el5.i686 (/fuse-kmdl-2.6.18-194.11.3.el5-2.7.4-8_12.el5.i686)
[code]....
After yum installed me fuse-ntfs-3g-2009.11.14-1.el5.rf.i386 I noticed that on one NTFS partition directories created by a normal user were writable only by root, although the user's umask was correct (0022; actually the files had root as group owner).I have a second partition mounted with exactly the same options in /etc/fstab where this problem did not occur.
/dev/hdb1 /win/d ntfs-3g uid=500,gid=500,umask=0007,nls=utf8 0 0
/dev/hda7 /win/f ntfs-3g uid=500,gid=500,umask=0007,nls=utf8 0 0
I ran a "yum downgrade fuse-ntfs-3g" and the problem was gone.Would be good to get a new version of the driver into the repos.
As stated , gvfs is extremely slow when browsing smb shares.Mount cifs runs in a third of the time gvfs takes.Often gvfs hangs up while listing.I've searched and see tons of noise about it but no real signal.Does anyone here have any info on gvfs as to why it's so slow browsing?"Name : gvfsArch : x86_64Version : 1.6.2"
View 1 Replies View Related