Debian :: Ntfs-3g Mount: Failed To Open /dev/fuse: Permission Denied

May 19, 2010

I cannot get access to my external hard disk. It says as in the "SUBJECT" above. What should I do? I installed Debian XFCE testing.

View 5 Replies


Ubuntu :: Mount FTP Directory - Fuse: Failed To Open /dev/fuse: Operation Not Permitted

Oct 4, 2010

I've been trying to mount ftp on a directory, using curlftpfs, but when I run:


curlftpfs user:pass@server /mnt/mount-point

I get the error:


fuse: device not found, try 'modprobe fuse' first

And when I run it, I get:


WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
FATAL: Could not load /lib/modules/2.6.32-dyomin.1/modules.dep: No such file or directory


mknod /dev/fuse c 10 229

After that when I run the mount command ) get the error:


fuse: failed to open /dev/fuse: Operation not permitted

View 4 Replies View Related

General :: Remote Mount Of Nfs Gives Permission Denied Error - FUSE File System?

Apr 6, 2011

I have created a new file system (fuse) which works fine and is mounted in the local host. I want to be able to mount it from another host. I added it to /ect/exports: /mnt/ltfs *(rw,sync) And restarted nfs. Then from my client host I type:

mount -t nfs myHostName:/mnt/ltfs /mnt/data1

Where /mnt/ltfs is on my local host and /mnt/data1 is on the client host. Note that this is a "FUSE" file system so here is it's local "mount" output: ltfs on /mnt/ltfs type fuse (rw,nosuid,nodev,default_permissions,allow_other) Note thet this is of type "ltfs" but I am told that it should work like its a nfs. ltfs uses fuse under the covers.

View 1 Replies View Related

Ubuntu Installation :: 11.04 - Failed To Mount (Permission Denied)

Apr 29, 2011

I cant install Ubuntu 11.04 , on my Emachines laptop. On my Windows 7, When I boot up my USB/CD/card, it says: Ubuntu failed to mount dev/loop0 , something like that everytime, no matter what I do. And when I try wubi it says permission denied, .log filed saved. I've also mounted it using clonedrive, nothing works.

View 1 Replies View Related

General :: Failed To Mount '/dev/sdc1': Permission Denied

Aug 5, 2011


Error mounting: mount exited with exit code 1: helper failed with:
Error opening '/dev/sdc1': Permission denied
Failed to mount '/dev/sdc1': Permission denied


How do I get past this error?

View 1 Replies View Related

Ubuntu :: PHP Not Working - Warning: Unknown: Failed To Open Stream: Permission Denied

Mar 10, 2010

I just isntalled LAMP using tasksel and have a problem. Whenever I try to access a page (aside from phpmyadmin, that works well), I get this error... Code: Warning: Unknown: failed to open stream: Permission denied in Unknown on line 0 Fatal error: Unknown: Failed opening required '/var/www/index.php' (include_path='.:/usr/share/php:/usr/share/pear') in Unknown on line 0

I have restarted the computer, restarted apache, etc and still nothing. When I first installed, phpmyadmin was inaccessible, so I ran some command in terminal which apparently created a symlink between phpmyadmin in the user/share dir to the /var/www dir, and curious if this is the problem. I have no clue how to remove this symlink if this is the case, and have phpmyadmin working now due to install using sudo apt-get install phpmyadmin.

View 1 Replies View Related

General :: Debian Lenny Won't Startup: Failed Code 126 - Permission Denied

Dec 12, 2010

I had debian lenny running smoothly for a while, then I think the power went out and the computer didn't shutdown smoothly. The next time I started it up I ran into this error: Checking root file system.../etc/rcS.d/ line 274: /sbin/logsave: Permission deniedfailed (code 126)This happens in single user mode as well. I've tried fscking all my partitions but it doesn't help. I've booted in bypassing the normal init and changed the permissions of /sbin/logsave to 777 and during boot I get a message of: The file system check corrected errors on the root partition but requested that the system be restarted. failed!Then the system just reboots automatically without letting me to anything.

View 7 Replies View Related

CentOS 5 :: PHP Not Working - Blank Page - Get This Warning: Unknown: Failed To Open Stream : Permission Denied In Unknown On Line 0?

May 5, 2010

I tried posting this before and I'm not sure what happened but I don't think it worked, so if it did please forgive the double very very new to centOS and linux in general. I just want to setup a test web server that more closely mirrors our actual web server that is hosted by rackspace. I've installed centOS and tried to setup Apache, PHP and MySQL from a guide on the web using Yum. When I go to localhost in the web browser I'm able to see the default apache page. However when I create a php page it's just blank.When I look at the apache error logs I get this: PHP Warning: Unknown: failed to open stream: Permission denied in Unknown on line 0

I've been searching alot on the internet and I know the issue is permission related, but I don't know how to fix it. I've seen some forum posts that say you need to use the chmod 775 command on the /var/www/html folder.Currently when I do ls -l /var/www/html it returns

-rw------- 1 root root 19 May 5 13:16 index.php
-rw------- 1 root root 19 May 5 13:15 index.php~

I'm sure that this isn't correct but like I said I don't know much about how to set permissions or who the owner needs to be. I've done alot of searching and seen similar posts, but no one seems to explain it clearly.

View 2 Replies View Related

Ubuntu :: Evince Does Not Open External Links - Failed To Execute Child Process "nautilus" (Permission Denied)

Jul 6, 2010

On a fresh installed Lucide machine, I cannot open external hyper links (url) from within evince. I get the following error message:

Unable to open external link

Failed to execute child process "nautilus" (Permission denied)

View 1 Replies View Related

General :: Creating A Open Fuse Mount Point?

Jul 27, 2010

I have a program that can create a fuse. For that i have to specify a mount point , like mono ccfs /mount. But how will I make /mount to be a fuse mount point? I donno whether my question sounds right or makes sense. But I want to create a fuse mount basically to provide it to the program. I dont hv any device or fs to mount initially .

View 2 Replies View Related

Debian Configuration :: Failed To Initialise HAL, Cannot Mount An Ntfs Drive?

May 13, 2010

I`m unable to mount my second hard drive I use to store my music and pics and wonder if it is to do with the error "failed to initialise HAL!" which I get every time I start Debian Lenny (AMD64 architecture). I have had this since doing an install (fresh) a few hours ago.

The drive is an ntfs one but when I click its icon in the computer section it says it cannot mount it and gparted says it cannot read the file system.If so how would I get the error box to stop appearing and how do I mount the ntfs drive?

View 2 Replies View Related

CentOS 5 :: Mount Ntfs Drive Amend Get Error "insisting The Fuse Module Isn't Installed"

Jun 9, 2009

I followed the steps in the wiki shown here: [URL] But when I try to mount an ntfs drive I get an error insisting the fuse module isn't installed. I try to modprobe fuse and it says there is no fuse module.

Yum confirms that :
Package fuse-2.7.4-1.el5.rf.i386 already installed and latest version
Package fuse-ntfs-3g-2009.4.4-2.el5.rf.i386 already installed and latest version
Package dkms- already installed and latest version
Package dkms-fuse-2.7.4-1.nodist.rf.noarch already installed and latest version
Package kernel-xen-devel-2.6.18-128.1.10.el5.i686 already installed and latest version

View 5 Replies View Related

General :: Copy File From The Underlying NTFS Windows HD - Error - Permission Denied

Jan 17, 2010

Quite a few times i have boot puppy linux live and have tried to copy file from the underlying NTFS windows HD only to get an error like permission denied when i try and copy a file to say a USB stick, i think some files copy but i seem to get permission errors with some files.

View 1 Replies View Related

Ubuntu :: Rsync Failed: Permission Denied (13)?

Nov 22, 2010

I have a Ubuntu box and just got a new hard drive. Rather than copy everything over from my old working Ubuntu install, I wanted to install Ubuntu from scratch and then rebuild the file contents.I have a large collection of music that I use on my mac (another computer) and like to keep sync'ed to the Ubuntu box. The following script used to work flawlessly:

rsync -avz --delete --exclude-from './music_exclude_list' '/Users/ryan/Music/iTunes/iTunes Music/' 'ryan@'


View 1 Replies View Related

Server :: Dovecot-lda/postfix - Failed: Permission Denied

Apr 27, 2011

I'm sooo exausted after two days of fooling with this. The problem: Apr 27 17:29:21 mxkasib dovecot: lda: Error: userdb lookup: connect(/var/run/dovecot/auth-userdb) failed: Permission denied (euid=8(mail) egid=12(mail) missing +w perm: /var/run/dovecot/auth-userdb, euid is not dir owner)

Obviously, dovecot-lda, instanced by postfix, couldn't access the auth-userdb file because of permission. There are plenty of topics over the internet, the problem is really simple. Except for I've got all the permissions needed, or it seems to me so and I'm missing something. Here is some additional information:


I've given all the permissions I could imagine. It's even devil 666, and it still complains.

View 2 Replies View Related

CentOS 5 :: Rndc - 'freeze' Failed - Permission Denied

Aug 7, 2011

I have my DNS configure in 2 zones. 1 internal, and the other external. DNS is chrooted under /var/named/chroot amd has been operating without any problems for well over 2 years now. I have recently run cross the problem shown in the subject line. When I try to freeze the internal zone with the following command...rndc freeze IN internal

I get the error...

I have been running the command as root, and with iptables turned off, so there is no firewall to restricting access. (the system sits behind a firewall) I have been searching the forums all over, but I havent run across what might be causing me to have root denied access. If anyone has seen any problem like this, please point me in the right direction so I can iron this out.

My named.conf is as follows...

View 1 Replies View Related

General :: Mounting NTFS With Ntfs-3g And Fuse As A User?

Jan 8, 2011

On a clean install of Arch linux I edited fstab to be like so :


/dev/disk/by-id/usb-Hitachi_HTS543232L9A300_9002555dd84a21024b000000-0:0-part1 /media/EXT ntfs-3g user,rw,uid=mas,gid=users,noauto 0 0

I tried ntfs and ntfs-3g but the result is the same I can mount root but I would like to be able to mount as a user. When I try to mount as a user I get


Unprivileged user can not mount NTFS block devices using the external FUSE library. Either mount the volume as root, or rebuild NTFS-3G with integrated FUSE support and make it setuid root. Please see more information at [URL] Before installing ntfs-3g I was able to mount as a user but there was no rw permission. Any way to mount an ntfs partition as a user without suid as the message said?

View 11 Replies View Related

Networking :: NFS Server Mount - Permission Denied

May 2, 2010

I just set up a storage server with NFS sharing. Everything work fine but, when trying to mount the remote partition on my ws, this is the issue:
/usr/sbin/start-statd: line 8: /sbin/rpc.statd: Permission denied
/usr/sbin/start-statd: line 8: /sbin/rpc.statd: Success
mount.nfs: rpc.statd is not running but is required for remote locking.
mount.nfs: Either use '-o nolock' to keep locks local, or start statd.

I tried so to mount it locally :
mount.nfs: access denied by server while mounting localhost:/var/ftp/pub /mnt
I don't think it depends because of the permiss of the directory, and anyway it's 1777.

View 4 Replies View Related

Server :: Mount Error(13): Permission Denied

Nov 23, 2010

When trying to mount samba share off of domain member server sysimage in Windows receive error "There are currently no logon servers available to service this logon request". When trying to mount.cifs from PDC to samba share on sysimage receive error "mount error(13): Permission denied".

PDC is ClearOS 5.2 named "dc0"
Samba file server is CentOS 5.5 x86_64 named "sysimage"
dc0 Samba version is samba - 3.5.5-1.1.v5.i386
sysimage Samba version is samba-3.0.33-3.29.el5_5.1.x86_64

dc0 is configured correctly to my knowledge, windows machines can join domain, domain users can log into windows machines, user directories are mapped properly, logon scripts run properly. sysimage ldap authentication is set up as shown in "Procedure 7.1.


View 1 Replies View Related

CentOS 5 :: Mount Nfsv4 Permission Denied?

Apr 21, 2011

i have a big question about nfsv4, 2 mahine , 1 client 1 serverclient mount -t nfs4 nfs:/ /mnt/nfscd /mnt/nfs/1touch: cannot touch `123': Permission deniedmount -lnfs:/ on /mnt/nfs type nfs4rw,addr= is my configclient & servervi /etc/hosts192.168.1.5 nfs nfs.test.com192.168.1.6 node1

View 6 Replies View Related

OpenSUSE :: Failed To Execute Child Process (Permission Denied)

Jul 11, 2011

I'm trying to start a program, but I keep getting the error:

"There was an error launching the application." Details: Failed to execute child process "/home/jjo/Desktop/0ad/build/resources" (Permission denied)

I've tried changing the permissions of the file, with no luck.

View 9 Replies View Related

Ubuntu Networking :: Permission Denied For Windows Mount

Mar 26, 2010

I have followed that many post about using a Windows mount, and still have an issue.

Using Ubuntu 8.04 to mount a shared on a Windows 2003 Server.

I have the fstab method with this line:

//server/xms /mnt/xms cifs defaults,uid=1000,gid=1000,credentials=/root/.smbcredentials 0 0


//server/xms /mnt/xms cifs credentials=/root/.smbcredentials,iocharset=utf8,file_mode=0777,dir_ mode=0777 0 0

Both work when doing a mount /mnt/xms command. I can ls the directory on the windows share. I can cat files from the windows share.

If I touch or mkdir in the windows share I get "Permission denied"

View 2 Replies View Related

Ubuntu :: Permission Denied - Failed Upgrade - Missed Some Backup Data - Can See It But Not Get It

May 15, 2010

I tried a 9.10 -> 10.04 upgrade that went fail. I can now get it to the login screen where it gives a hard freeze. Same with recovery. I can get to a command line, but not with networking so

So I finally said screw it, I'm going to doa fresh install. I downloaded and burned 10.04 at work. Not, it is giving me an installer error when I boot from it, but then it will load the desktop from the LiveCD.

All I really want to do is grab some data that I didn't get when I backed up by home directory, then I can go back and do a fresh install. I can even download a new 10.04 CD if I need to because the installation files are screwed up or something.

The problem is that some of the files have permissions on that that show as an 'X' on the icon and it won't let me copy them to my USB backup drive.

How can I copy the files marked with an 'X' that have this permission issue?

View 3 Replies View Related

Ubuntu :: Ssh Permission Denied (publickey) Bind To Port 22 On Failed: Address Already?

Jul 19, 2011

I'm trying to add a key public key for my dev box which is a vm running ubuntu natty, and I am unable to connect via ssh. I've tried rsa and dsa, as well as these commands:

exec ssh-agent bash
ssh-add ~/.ssh/id_rsa
ssh-add ~/.ssh/id_dsa


I think I've found the error by running sudo /usr/sbin/sshd -Dd, but I'm not sure how to fix it:

ebug1: sshd version OpenSSH_5.8p1 Debian-1ubuntu3
debug1: read PEM private key done: type RSA
debug1: Checking blacklist file /usr/share/ssh/blacklist.RSA-2048


View 3 Replies View Related

Fedora :: KVM Could Not Open Disk Image - Permission Denied

Dec 24, 2010

I'm getting error from KVM when i try to create new machine. I have install group Virtualization. From gui virtual-manager (after being asked for root passwd) tried to create new machine. When pressed on 'Finish' got this 'Permission denied' error:
Unable to complete install '<class 'libvirt.libvirtError'> internal error Process exited while reading console log output: char device redirected to /dev/pts/3
qemu: could not open disk image /sonik_data/software_archive/CentOS-5.5-x86_64-netinstall.iso: Permission denied

Traceback (most recent call last):
File "/usr/share/virt-manager/virtManager/", line 1567, in do_install
dom = guest.start_install(False, meter = meter)
File "/usr/lib/python2.7/site-packages/virtinst/", line 1023, in start_install
return self._do_install(consolecb, meter, removeOld, wait)
File "/usr/lib/python2.7/site-packages/virtinst/", line 1088, in _do_install "install")
File "/usr/lib/python2.7/site-packages/virtinst/", line 1059, in _create_guest
dom = self.conn.createLinux(start_xml, 0)
File "/usr/lib64/python2.7/site-packages/", line 1277, in createLinux
if ret is None:raise libvirtError('virDomainCreateLinux() failed', conn=self)
libvirtError: internal error Process exited while reading console log output: char device redirected to /dev/pts/3
qemu: could not open disk image /sonik_data/software_archive/CentOS-5.5-x86_64-netinstall.iso: Permission denied

It's running as a root, what permissions we are talking about here? I'm running F14, kernel, libvirtd 0.8.3

View 4 Replies View Related

Ubuntu Installation :: Permission Denied While Trying To Open /dev/sda1?

Mar 25, 2010

When, from the live cd I try to execute

e2fsck -y /dev/sda1
All i get is:[code].......

View 3 Replies View Related

General :: Cannot Open Network Interfaces - Permission Denied

Dec 11, 2010

I can't open etc/network/interfaces file comes some permission denied. What can I do?

View 2 Replies View Related

Slackware :: Sudo: Can't Open /etc/sudoers: Permission Denied

Jun 10, 2011

After install TexLive, sudo stop working. If I run sudo:


sudo: can't open /etc/sudoers: Permission denied
sudo: no valid sudoers sources found, quitting

Edit: Hal and dbus is not working either, if i startx I don't have network manager or automatic mount of pen and disks.

View 10 Replies View Related

Slackware :: Error - Cannot Open /dev/ttyACM0: Permission Denied

Aug 7, 2010

I installed wvdial on my Satellite Toshiba laptop. All works well but I have to use the <wvdial> command as root. If I try to use it as a user i get an error message Cannot open /dev/ttyACM0: Permission denied So Im just wondering; is it ok to use wvdial as root?

View 2 Replies View Related

Ubuntu :: 10.04 Mount Is Denied NTFS Volume Is Already Opened Busybox?

Aug 22, 2010

issue is with 10.04 installed via wubi on a xp pro ntfs drive.Have setup a new installation of 10.04 and been running it a few months.Update Manager came up and I said ok.Then after rebooting, this is what I get and I have found many SIMILAR but CONFUSING threads, so I don't know where to go from here and how to fix it.Grub flashes, and then this is what I get:Mount is denied because the NTFS volume is already exclusively opened.Use the fuser command.

Could not mount the partition /dev/sda1
run chkdsk /r
(filesystem = ntfs, error code = 16)


View 9 Replies View Related

Copyrights 2005-15, All rights reserved