General :: Debian - Install Rtl8187se Driver In Default Debian Kernel (without Generic)?
Apr 20, 2010
I have rtl8187se linux driver, during installation in debian linux it tells that "the kernel is not a generic". How can i install this driver in default debian kernel (without generic)?
I'm running Debian wheezy on a Toshiba NB505 and I've noticed that the wireless connectivity can be painfully slow at times. I know it's not our home network because my desktop flies (running Windows).Currently, I have the driver from this guide installed. I went to Realtek's site to download the latest driver for this wireless card (RTL8188CE, the Linux/UNIX version) thinking maybe this more up-to-date driver would operate better than the one used in the guide above.Is there a possible way to install this driver, or should I just stick with the current driver I'm using from the guide above?
After upgrading kernel package to 2.6.32-5 NVIDIA installation gave me ERROR:Unable to load the kernel module 'nvidia.ko'. This happens most frequently when this kernel module was built against the wrong or improperly configured kernel sources, with a version of gcc that differs from the one used to build the target kernel, or if a driver such as rivafb/nvidiafb is present and prevents the NVIDIA kernel module from obtaining ownership of the NVIDIA graphics device(s), or NVIDIA GPU installed in this system is not supported by this NVIDIA Linux graphics driver release.
I've built a new kernel (2.6.34) on our workstation at work. It boots and runs beautifully, but there is one minor problem. I created the kernel as a Debian package along with the kernel headers. Upon installing both and attempting to build the nVidia driver for said kernel, the installer tells me that it cannot determine the version and quits. This happens even if I manually specify the path to the headers. What's going on here, did I miss something during my compilation of the new kernel?
I am fairly new to Linux. My machine is running Debian 5.0.5 with gcc version 4.3. When I try to install the Nvidia QuadroFX 3450 driver I got from the Nvidia web site I get an error saying: "The compiler used to compile the kernel (gcc 4.1) does not exactly match the current compiler (gcc 4.3)....." Does this mean my gcc version is too new for the driver? if so, how do I roll back to a older version?
I upgraded my Linux kernel from 2.6.35-23-generic to 2.6.35-24-generic and the Broadcom wireless STA driver stopped working. If I try to reinstall it with Jockey it fails and shows this in the log:
I installed the latest kernel liquorix (2.6.35) but when i want to install the Nvidia driver downloaded on the Nvidia website (256.53), i have an error message because Nvidia doesn't found the kernel source tree.
I install linux-image-2.6.35-6.dmz.2-liquorix-686_2.6.35-16_i386.deb, linux-headers-2.6.35-6.dmz.2-liquorix-686_2.6.35-16_i386.deb and build-essential. I don't understand why the installation doesn't works.
So far I've tried to add a number to 'GRUB_DEFAULT=', but it wouldn't want to boot in anything other than Debian or Windows, same with StartUp-Manager...
I currently have the liquorix kernels installed, but I can't get to use them as the standard Debian kernel is always picked. So is there any way to change this behaviour?
I recently installed Squeeze. I noticed there are 2 main kernels installed. One first one at the top is 2.6.32-trunk-686 and the other is 2.6.32-3-686. At the time, I did not know or think much about it. Now when I try to get linux headers to compile drivers, I am not finding them. I also read some problems with trunk kernels.
How can I assign the 2.6.32-3-686 kernel to be the default in grub? Is it OK to use it as the main kernel?
Do I need to upgrade the trunk kernel to rid of trunk or just don't use it?
I want to install VGA driver on debian squeeze. my VGA is "Intel Corporation 82G33/G31 Express Integrated Graphics Controller".I do not know which driver I must install for this VGA.Does Linux recognize related driver ?
I'm somewhat familiar with Ubuntu (familiar but not sharp!) but have never tried Debian OS until now. I've installed Debian 5 64bit as a guest on a Mac host. I'm impressed how smooth the install went; even installing VB Guest Additions went smoothly. But, I get a "Your system had a kernel failure" error after booting. I have searched the forum & didn't find this error. Everything seems to work okay but is there an update that isn't showing in the Update Manager? Could this have something to do with VirtualBox 3.1.4?
I recently installed Debian Squeeze on Acer Aspire 5542 , it has a Ati Radeon HD 4200 graphics card
I want to install the fglrx drivers , I apt-get install fglrx-driver, fglrx-glx & fglrx-control , The packages & dependencies download fine but when apt tries to install them the fglrx-modules-dkms fails .
I'm encountering a problem running X and Gnome from a Xen-enabled Kernel with NVIDIA Binary driver compiled with IGNORE_XEN_PRESENCE=y on debian squeeze
Hardware: NVIDIA NVS 5100M Kernel: Debian Squeeze : 2.6.32-5-xen-amd64 NVIDIA Kernel from the official package
Boot and module loading are successful, but when X starts, I only get a black screen. I attached here my Xorg.0.log, however it doesn't seems to have any problem.
recently, i installed the debian testing version system. sadly, i do not know how to make my wireless card work. is there anyone who also hasr this problem? b.t.w, how to check my wireless card type?
Is there a way to programmatically determine whether a particular driver support is built-in rather than a loadable module? I'd be grateful if somebody would share how. I have written a shell script using the RTC (real time clock). I can check whether the rtc-cmos kernel module exists and load the module accordingly as needed, but I don't know how to determine when the driver is built-in. Of course, if the driver is built-in then the module does not exist.
I seem to recall there is a method to query the kernel config file (/proc/config.gz), through which I probably could grep for the CONFIG_RTC_DRV_CMOS parameter. I also can check whether /proc/driver/rtc exists. If that file exists then either the driver is built-in or the module was loaded.I realize the rtc-cmos driver is built-in with the standard Debian kernel build, but I still would like a way to query where the driver is supported.Is there a straightforward or direct method to query the kernel whether a particular driver is built-in?
I've posted here before (viewtopic.php?f=5&t=66322) about problems arising from my attempts to get an nVidia driver to work with my custom kernel. Now those problems are all fixed, and I'm back to where I was: the built kernel boots fine, but the nVidia driver fails.
The custom kernel is as near to the stock one as I can make it, I'm just trying to find a working build process at present, before trying to build a later-version kernel.
I used sgfxi with "-! 40" to build the nVidia driver for my custom kernel; it reported that everything was fine.
With stock kernel - 2.6.32-5-amd64 ...
Extracts from /var/log/Xorg.0.log: X.Org X Server 1.7.7 Release Date: 2010-05-04 X Protocol Version 11, Revision 0 code....
I was previously using kernel-huge until a slackware update caused some problems for me, so I switched over to kernel-generic but now I'm wondering if it uses both of my cpus on my dual core processor.
When I only change a driver file manually, for example /newkernel/linux-source-.6.32/drivers/gpu/drm/i915_drv.h, do I need to run "make config" or similar like "make menuconfig" or can I just skip? I mean these steps:
install debian 6 on my pc and have big problem with videoadapter driver i cannot install driver i dowload driver from nvidia do something in google but nothing! palit gtx 460 linux debian 6 x64.
Trying to compile Kernel 2.6.35 on Ubuntu 9.10 (2.6.31-14-generic).
got: The UTS Release version in include/linux/version.h"" does not match current version: "2.6.35-xxx" Please correct this make[1]:***[debian/stamp/install/linux-image-2.6.35-xxx] Error 2 make[1]:***leaving directory `/usr/src/linux-2.6.35' make:*** [kernel_image] Error 2
Can any one tell me what should I do? Is this Ok for using the compiled vmlinux image?where can I find the correstponding initrd file if this kernal compile is Ok?
I'm trying to install Atheros AR9485 wireless card driver on debian, and I had no luck.
I followed this [URL] .... to install backports kernel version. The wireless card worked, however, intel display driver displayed the color in the wrong way.
Red pixels are green, and green are yellow. It was displayed like when someone try to connect a PAL system to a TV that supports only NTSC.
My gentoo laptop doesn't have a serial port, so I got a usb-serial (RS-232) adapter from ebay. However when I plug it in, the only thing dmesg mentiones is: Code:usb 5-1: new full speed USB device using uhci_hcd and address 2I've tried to look for a kernel driver in "make menuconfig" by pressing "/" and typing 232. Nothing about RS-232. Device Drivers -> Character drivers -> Serial drivers has 8250 and UART as a module. Device Drivers -> USB support -> USB serial converter support has in-kernel: USB generic serial driver, and FTDI Single port driver as a module, but it still isn't getting recognized.Is there some module i forgot to enable, or do i have to download a separate module from somewhere?
I'm new in Linux and would like to install my wireless realtek which is installed automatically by most Linux distros but not in fedora. The fedora 12 is not installed my wireless, fedora 13, 14 and now 15 is not either. How do I install it? Will we ever Fedora automatically install this?