CentOS 5 :: Bug In Fuse-ntfs-3g-2009.11.14-1.el5.rf.i386?
Jan 29, 2010
After yum installed me fuse-ntfs-3g-2009.11.14-1.el5.rf.i386 I noticed that on one NTFS partition directories created by a normal user were writable only by root, although the user's umask was correct (0022; actually the files had root as group owner).I have a second partition mounted with exactly the same options in /etc/fstab where this problem did not occur.
I tried ntfs and ntfs-3g but the result is the same I can mount root but I would like to be able to mount as a user. When I try to mount as a user I get
Code:
Unprivileged user can not mount NTFS block devices using the external FUSE library. Either mount the volume as root, or rebuild NTFS-3G with integrated FUSE support and make it setuid root. Please see more information at [URL] Before installing ntfs-3g I was able to mount as a user but there was no rw permission. Any way to mount an ntfs partition as a user without suid as the message said?
I followed the steps in the wiki shown here: [URL] But when I try to mount an ntfs drive I get an error insisting the fuse module isn't installed. I try to modprobe fuse and it says there is no fuse module.
Yum confirms that : Package fuse-2.7.4-1.el5.rf.i386 already installed and latest version Package fuse-ntfs-3g-2009.4.4-2.el5.rf.i386 already installed and latest version Package dkms-2.0.20.4-1.el5.rf.noarch already installed and latest version Package dkms-fuse-2.7.4-1.nodist.rf.noarch already installed and latest version Package kernel-xen-devel-2.6.18-128.1.10.el5.i686 already installed and latest version
I have installed three flavors of linux on vmware 1.rhel5 2.centos 5.5 3.fedora 14 and also install centos 5.5 on a separate hard disk (not on vwware).
I want to mount my pen drive on linux which is ntfs. I have tried a lot on rhel5 only. Please tell whether it is possible mount ntfs on any distributions I have mentioned above? I have already installed fuse, fuse-devel, fuse libs, ntfs-3g, ntfs-3g libs on rhel5. But I still got error: "fatal : module fuse not found" "ntfs unknown file system"
I've been trying to mount ftp on a directory, using curlftpfs, but when I run:
Code:
curlftpfs user:pass@server /mnt/mount-point
I get the error:
Code:
fuse: device not found, try 'modprobe fuse' first
And when I run it, I get:
Code:
WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. FATAL: Could not load /lib/modules/2.6.32-dyomin.1/modules.dep: No such file or directory
Code:
mknod /dev/fuse c 10 229
After that when I run the mount command ) get the error:
Code:
fuse: failed to open /dev/fuse: Operation not permitted
I have OpenSUSE 11.2 KDE edition. I download TrueCrypt 6.3a from TrueCrypt - Free Open-Source On-The-Fly Disk Encryption Software for Windows 7/Vista/XP, Mac OS X and Linux - Downloads (openSUSE - x64 (64bit) .rpm). The first problem that I encountered was dependencies; first I installed fuse using YaST then I installed the rpm file. but when I try open a volume, TrueCrypt gave me Code: fuse: device not found, try 'modprobe fuse' first. So I issue in Terminal that command but I see this error:
Code: FATAL: Could not load /lib/modules/2.6.31.5-0.1-desktop/modules.dep: No such file or directory I googled and search the forum but didn't found anything. So I thinkg only I have this problem.
Recently upgraded to F12. K3B can't burn DVDs. Drive was working fine in Fedora 10 before the upgrade, and I've applied all updates.
Here is the output when run from console:
Code:
lsof: WARNING: can't stat() fuse.gvfs-fuse-daemon file system /home/SlowCoder/.gvfs Output information may be incomplete. (K3bDevice::HalConnection) unlock queued for /org/freedesktop/Hal/devices/storage_model_DVD__RW_GA10N First sec data area: 43:41:33 (LBA 196608) (402653184
My work reponsibilities now include a new server running Centos 5.2 on a Dual Xeon Dell server machine with Raid 1 on 2 160Gb disks, but I have no experience of Linux, let alone Centos.I figured I'd download an image and load it on a spare machine just so I could get used to the OS and try things out without risking my live server. My only available spare at present is a Toshiba laptop from 2000 (it was top of the range at the time, but probably looks bad compared to my pocket smartphone now).My questions are:
a) Is it feasible to load Centos on this old donkey of a laptop? Would I struggle to find the right drivers, etc., or is it all contained in the distribution?
b) Assuming it runs, would the differences between the two implementations significantly affect my learning experience?
c) Assuming the two are similar enough to make the laptop a useful reference/staging/learning tool, where do I start? I've already downloaded an ISO image for LiveCD (i386) and burned it to a CD but the CD doesn't seem to have anything I recognise. Windows (both Vista and XP) treats it like any data CD and shows no autorun behaviour with it.
I am in the process of building a new server on an Asus P5QPL-AM motherboard and an Intel E8600 processor.explain to me the difference between the two versions and what would you recommend.Also, is there any advantage of SATA over IDE hard drives?
I have been using SLES 10 SP1 so far with about 6TB Raid system without problems.I have upgraded the OS to CentOS 5.3 i386 and I have noticed the kernel can not recognize raid system larger than 2TB.Is there any parameters that I have to set ? or the i386 distribution simply does not support larger raid, so I have to use x86_64 version, instead?
For some reason, no matter what setting I adjust in Administration or Prefrences in the system menu for sound, no sound seems to come from my speakers. I created a log file and I got this as the error:------- System Config Soundcard Log -------- Sun Sep 12 12:59:56 EDT 2010 aplay: main:583: audio open error: Device or resource busy
I was following a simple tutorial on how to program and compile a hello world program using assembly when I got this error;Quote:ld: i386 architecture of input file `hello.o' is incompatible with i386:x86-64 output.The tutorial told me to make two files;Quote:hello.asmsection .data;section declaration
msg db "Hello, world!",0xa;our dear string len equ $ - msg ;length of our dear string section .text;section declaration
I am trying to download CentOS 5.4 from the following link[URL].. CentOS-5.4-i386-bin-DVD.iso 02-Oct-2009 12:35 3.7G I have downloaded it twice with chrome and the size I received twice is 1.99 GB (2,147,417,640 bytes)
Is this correct or I am doing something wrong. I am reluctant to try another mirror because I guess they all will point to the same file.
I have a problem when install Cenos5.5-i386-dvd.iso on VMware6.5. My host os is Windows2003 sp1 and I installed Centos via VMware on host windows2003. After powering on VM, it loaded the ISO file but showed me an error like that " Could not fine kernel image : linux " then boot process failed.
I've been trying to find log4cpp and log4cpp-devel packages in the *i386* repositories on the Centos 5.4 mirrors but they appear to be missing. They do exist in the x86_64 repositories on the same mirrors.e.g.[URL]
I keep getting a notice that "Updates Available" for the package syslinux-3.86-3.i386 updates syslinux-3.11-4.i386. But when I try to do that I am met with a dependency for perl-Crypt-PasswdMD5-1.3-1.2.1 which is followed by the error: Public key for syslinux-3.86-3.i386.rpm is not installed
I would like to install xmlrpc-c . I do: wget -P /tmp [URL] and when i execute: rpmbuild --rebuild /tmp/xmlrpc-c-1.06.18-1.el5.kb.src.rpm i got this error:
I have been given a "gift" of a Netfinity 5100 that currently has that other M$ operating system on it. I want to configure it as closely as possible to my web server located in Chicago that uses CentOS 5.5. and use it as a "test server".
This is daunting for me as I've only been involved with Linux for less than 6 months. I have Ubuntu 10.10 on my desktop PC.
The person who gave it to me indicated that I should plug it in and let the 2 arrays charge for 24 hours. I'm doing that. I also have had an electrician install a clean new 20 amp circuit for it. And I have downloaded and created a CentOS 5.5 i386 Live CD.
OK ... we've now exhausted my realm of knowledge. Can anyone give me a broad scope of what needs to be done? I will try to plug in the specifics of each step as I progress.
A assume I plug in a keyboard and screen to it. Do I use an ethernet connection between the server and my router to provide broadband ... what steps are necessary to configure that? Do I need to download and install Apache and MySQL .. if so, where?
It seems I have some problem with glibc i686 on my VIA CPU. How can I force to install glibc i386.rpm instead of i686 in the clean installation process?
I have a PXE/kickstart installation system running ok. I would like to build a custom installation x86_64 .iso with the i386 .rpms removed. Currently I install from the standard x86_64 iso, then go and remove the i386 rpm's with all the attendant problems and impact on docs etc. Has anybody tried this? Is it as simple as just deleting *i386.rpm and then building another .iso from the resultant installation tree?
I have a centos server x86_64 arch installed - i am getting some issues where i want to update rpms but because there is a equivliant i386 package installed i get dependency errors.Is it safe to run this command to remove all i386 packages - will my system still boot after this yum remove *.i?86
So I'm playing around w/ some Cisco equipment and needed a quick tftp server. Go to command line and type yum install tftp-server. I get No Package available! I can clearly see it here on the i386 repo. Any ideas?? In the meantime, I'm just going to upgrade this lil 600m laptop to CentOS 6 to quickly solve the problem but I thought it was curious.
When I installed CentOS on a 64 bit machine, I selected the 64 bit option. However, for some reason it installed many i386 packages - these were exact duplicates of installed x86_64 packages.Is this typical? How do I prevent this on future installs? If I left them installed, could this have caused a problem in the future? Due to my fastidious nature, I used yum extender to uncheck every duplicate i386 package and uninstalled them. This took some time. I am still not proficient with yum directly so I am wondering if there is a command to uninstall all i386 packages quickly.
