General :: Mounting NTFS Pen Drive - Module Fuse Not Found
Dec 29, 2010
I have installed three flavors of linux on vmware
1.rhel5
2.centos 5.5
3.fedora 14
and also install centos 5.5 on a separate hard disk (not on vwware).
I want to mount my pen drive on linux which is ntfs. I have tried a lot on rhel5 only. Please tell whether it is possible mount ntfs on any distributions I have mentioned above? I have already installed fuse, fuse-devel, fuse libs, ntfs-3g, ntfs-3g libs on rhel5. But I still got error:
"fatal : module fuse not found"
"ntfs unknown file system"
I tried ntfs and ntfs-3g but the result is the same I can mount root but I would like to be able to mount as a user. When I try to mount as a user I get
Code:
Unprivileged user can not mount NTFS block devices using the external FUSE library. Either mount the volume as root, or rebuild NTFS-3G with integrated FUSE support and make it setuid root. Please see more information at [URL] Before installing ntfs-3g I was able to mount as a user but there was no rw permission. Any way to mount an ntfs partition as a user without suid as the message said?
I followed the steps in the wiki shown here: [URL] But when I try to mount an ntfs drive I get an error insisting the fuse module isn't installed. I try to modprobe fuse and it says there is no fuse module.
Yum confirms that : Package fuse-2.7.4-1.el5.rf.i386 already installed and latest version Package fuse-ntfs-3g-2009.4.4-2.el5.rf.i386 already installed and latest version Package dkms-2.0.20.4-1.el5.rf.noarch already installed and latest version Package dkms-fuse-2.7.4-1.nodist.rf.noarch already installed and latest version Package kernel-xen-devel-2.6.18-128.1.10.el5.i686 already installed and latest version
I have OpenSUSE 11.2 KDE edition. I download TrueCrypt 6.3a from TrueCrypt - Free Open-Source On-The-Fly Disk Encryption Software for Windows 7/Vista/XP, Mac OS X and Linux - Downloads (openSUSE - x64 (64bit) .rpm). The first problem that I encountered was dependencies; first I installed fuse using YaST then I installed the rpm file. but when I try open a volume, TrueCrypt gave me Code: fuse: device not found, try 'modprobe fuse' first. So I issue in Terminal that command but I see this error:
Code: FATAL: Could not load /lib/modules/2.6.31.5-0.1-desktop/modules.dep: No such file or directory I googled and search the forum but didn't found anything. So I thinkg only I have this problem.
Just installed 11.3 on my computer, however when I connect an external NTFS harddisk I receive an error message. When I open dolphin to connect to an internal NTFS partition I receive the message:
I have an Ubuntu 10.04 box that accesses NTFS drives along with ext4. Recently, I switched from ntfs-3g to Paragon NTFS driver, which is proprietary, but free of charge. It feels quite faster on my internal drives. Now I have a problem with external eSATA NTFS drive. When it is detected, I mount it via Nautilus GUI, but it gets mounted with the ntfs-3g driver. (It can be mounted via command line with the Paragon driver, but this is less convenient. How can I configure my system (is it Gnome or some system-wide configuration ?) to mount all NTFS drives with the Paragon driver?
Error mounting: mount exited with exit code 1: helper failed with: mount: according to mtab, /dev/sdc1 is already mounted on / mount failed. Not sure what happened but it worked fine till last reboot. It's a 250g NTFS drive named MEDIA device /dev/sda1. why it won't mount now.
I used Wubi to install Ubuntu 10.10 onto my laptop alongside Windows 7. I need to access my windows harddrive, however, so I used NTFS Configuration Tool to mount the drive. However, whenever I reboot, it fails to mount and I actually have to go back into NTFS Config Tool, delete the old mount, and remount it. This is tedious. My /etc/fbstab file looks as follows:
I have two HDD in my computer and one is in NTFS which in linux it show up and the name is sdb1 and when I try to get it to mount the drive it give me the following error at the bottom of the screen: hal-storage-fixed-mount-all-options refused uid 1000
I've been working for a while to help a friend re-activate her system after a Windows crash. I tried every way I could to restore Windows, but the system is thoroughly bollixed. The data is still there on the disk, and you can read/write if you boot off of external media. I backed up her data that way.
Details if you need them, but for now suffice it to say that I finally got her up and running by installing Xubuntu Lucid in a dual-boot setup. However Xubuntu isn't automatically recognizing and mounting the NTFS partition the way I would expect it to. I had her run a few commands in the terminal, and here's what she got.
Ordinarily I'd use mkdir then mount to solve this. But I'd like to check a few things before I go and do that.
First, as I understand it if a Windows instance is not shut down properly it can make it difficult for Linux to mount the partition. The usual solution is simply to reboot Windows and then shut down properly, but that's impossible in this case. Will that affect the mkdir/mount solution?
Second, the fact that /dev/sda1 doesn't even show up in fstab causes me some concern. Would that be a problem for mkdir/mount?
And third, how to I set it up so the NTFS partition mounts automatically?
I have been trying to use fstab, writing a script in /etc/init.d to mount my external ntfs usb drive. I have had absolutely no luck and I have tried just about every solution I could find on the web except for writing a udev rule which I have never done so I am not exactly sure how.
My solution for the interim is to put the mount command in the rc.local file. That works, but I don't understand why I can use fstab to mount it. Putting it in the fstab gives me errors like "unknown file system" or just "An error occurred during mounting of drive" and then the booting stops. I tried using both ntfs and ntfs-3g.
After yum installed me fuse-ntfs-3g-2009.11.14-1.el5.rf.i386 I noticed that on one NTFS partition directories created by a normal user were writable only by root, although the user's umask was correct (0022; actually the files had root as group owner).I have a second partition mounted with exactly the same options in /etc/fstab where this problem did not occur.
Recently upgraded to F12. K3B can't burn DVDs. Drive was working fine in Fedora 10 before the upgrade, and I've applied all updates.
Here is the output when run from console:
Code:
lsof: WARNING: can't stat() fuse.gvfs-fuse-daemon file system /home/SlowCoder/.gvfs Output information may be incomplete. (K3bDevice::HalConnection) unlock queued for /org/freedesktop/Hal/devices/storage_model_DVD__RW_GA10N First sec data area: 43:41:33 (LBA 196608) (402653184
I've been trying to mount ftp on a directory, using curlftpfs, but when I run:
Code:
curlftpfs user:pass@server /mnt/mount-point
I get the error:
Code:
fuse: device not found, try 'modprobe fuse' first
And when I run it, I get:
Code:
WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. FATAL: Could not load /lib/modules/2.6.32-dyomin.1/modules.dep: No such file or directory
Code:
mknod /dev/fuse c 10 229
After that when I run the mount command ) get the error:
Code:
fuse: failed to open /dev/fuse: Operation not permitted
until recently, they did fstab mount quite happily, but now, they don't
the error I get is:
Code: Mountall mount /media/win7 [1089] terminated with status 21 My fstab has not changed but here it is: Code: /dev/fd0 /media/floppy0 vfat noauto 0 0 UUID=da252821-a30d-415b-84cb-adca92be5b72 / ext4 defaults 0 1
[Code]....
Oh if I make the windows drive the first avail, then it boots just fine.
I have Debian Squeeze installed. I have 3 different HDDs, one of them is SATA, the other 2 are IDE, on one of which I have the distro installed.
How do I mount the other 2 partitions? I see them in "Places" but when I click on them I get an error message "Unable to Mount <The name of the volume> Can not get volume.fstype.alternative".
I can see both volumes in /dev/ntfs. I tried doing
I am trying to install a Sunix 4018T dual parallel port card on a pc with Mandriva Linux 2010.1: Dealer told me that linux has driver for this card already so I inserted it and turned on my pc. Unfortunately when I try to install my Okidata ML320, cups it's not showing any parallel ports. I try to update all the system with last patches and packages :I tested the card on a pc with windows xp, installed my printer and it works perfectly.
I know nothing about linux. But my friend says linux is good. So, I kept a copy of fedora core 10 i386. My fiend has a lot of movies about 100 in his ipod. So, I took it. It contains lot of viruses and I opened the ipod in windows but my windows has malfunctioned due to the virus. So, I have installed the fedora core 10 i386. I have some important information in the windows ntfs partitions. How do i mount those ntfs partitions.
i have dual OS in my hard disk. win xp and rhel5. i used use ntfs partition too while working in linux. There is no problem until i enable selinux. When i enabled that, its giving some error at startup and left the partition unmounted. But manually i can mount after logged in. But i need it at the startup itself. How to solve this.i am installed dkms* dkms-fuse* fuse* and fuse-ntfs-3g* rpms to use the ntfs partitions.
