General :: Dual Booting Ubuntu And OpenSUSE ?
Apr 3, 2011
I would like to install OpenSUSE 11.4 on the same hard drive where Ubuntu 10.10 resides. I have plenty of free space following the Ubuntu partitions to do this.
I typically create three partitions: a root (/) mounted partition, a swap partition, and a home (/home) mounted partition.
I have these questions:
Is it advisable to load two Linux OS's on the same drive or would this be problematic?
If advisable, then: Can I use the same swap partition for both Ubuntu and OpenSUSE (as I plan to run only one OS at a given time)?
How will this effect booting (as Ubuntu uses GRUB2 while OpenSUSE uses GRUB)? Will the GRUB OS selection menu successfully display the two OS's for selection? If not, can I fix the problem through GRUB commands?
I am keeping Windows 7 completely separate with its own boot block. I do this by turning off appropriate hard drives during installations. Thereafter, I use F12 when prompted during boot-up to select the Linux (default) or Windows boot drive. When I boot through the Linux hard drive, I would like the Ubuntu or OpenSUSE Linux OS to be selectable through GRUB (or GRUB2).
View 1 Replies
ADVERTISEMENT
Feb 28, 2011
My PC is an older model Toshiba Satellite that I've upgraded a bit to handle Windows 7 Ultimate x64.
Recently, I joined a CST program at a local college, and there is an entire mod on Linux. I'm at the top of my class, and I aim to stay that way, so I found out what distro they were using, and downloaded openSUSE 11.3. I tried to install it once, and I failed, though I didn't screw up my Windows...much.
I've created an entire 132GB partition, and a 3 or 4GB swap, but I keep getting an error about the boot loader not being on a partition entirely below 128GB. So, I set the partition for 127.98GB, and still with the error.
I'm no slacker when it comes to working with Windows, but when it comes to Linux, of any type, I'm horrible. I need to be able to install the fully functional openSUSE OS alongside my Windows 7 Ultimate, without completely screwing my Windows install up. I can recover, so I'm not afraid to try new things.
View 5 Replies
View Related
May 6, 2010
Just sucessfully installed a sual boot with 11.2/ubuntu 10.4. 11.2 was installed first, than ubuntu. ubuntu recognizes and displays 11.2 on its bootloader, 1..2 does ot show ubuntu on its boot menu. so this mean I have to edit menu.lst and physically add the menu entry (root, load the kenel, and load initrd)....correct?
View 9 Replies
View Related
Aug 23, 2010
Is it possible to dual boot openSUSE & Ubuntu through GRUB 2? Apparently SUSE uses standard GRUB. I installed SUSE but only have Ubuntu options displayed on boot.
View 3 Replies
View Related
Jan 22, 2011
I installed Opensuse 11.3 on a separate partition to vista on my Acer 5115. It runs fine but the GRUB boot loader failed to show the Vista OS. I tried to add it by editing menu.As far as I can see (and I don't have much experience with these things) the Vista OS is there, on sda5, but doesn't boot correctly because the winload.exe is in the wrong directory. Why the sdax numbers are all rearranged is a mystery too, but I have reinstalled vista several times so that could be why.I don't have a vista recovery cd (wasn't given one), is there any way to fix this within opensuse (which works fine)?
View 9 Replies
View Related
Dec 22, 2010
I have a 2008 white MacBook.Dual booting Mac OS X and 11.3?
View 1 Replies
View Related
Feb 26, 2011
I was trying to install a dual boot with OS X and this is what it told me:
"delete partition /dev/sda1"
As far as I can tell, this means it wants to delete OS X. On my mac's terminal, the linux partition is "disk0s3". Am I correct to assume that I should be custom partitioning in the OpenSUSE installer and have it create all its partitions out of sda3 only?
View 7 Replies
View Related
May 2, 2010
I found this tutorial about dual booting Suse 11.0 & XP. Is it suitable also for Suse 11.1 & win7, or should I find another tutorial? Can you recommend a good tutorial for dual-booting Suse 11.1 & Win7 ? I've searched a lot but didn't find any.
View 2 Replies
View Related
Jun 9, 2011
In addition to my pre-existing installation of openSUSE 11.4 I installed Kubuntu 11.04 to my machine. Surprisingly enough the SUSE Grub was not overwritten and I can still boot SUSE fine. I cannot, however, get Kubuntu to boot; tried to set up a chainloader entry in the SUSE Grub, but that doesnt seem to find valid boot files and errors out stating Invalid or corrupt executable format.
As far as I can see, both openSUSE and Kubuntu see my hard drives in the following order:
sda: 500 GB Samsung on SATA (no OS installed)
sdb: 120 GB WD on IDE Master (Kubuntu installed to 1st partition (sdb1)
sdc: 160 GB Samsung on IDE Slave (openSUSE installed to 1st partition (sdc1)
During installation Kubuntu (alternate CD) installed Grub2 to (hd0,0), which should be what is called sda above.
View 6 Replies
View Related
Aug 2, 2010
I want to try OpenSUSE but don't want to get rid of Ubuntu yet. How can I install it so I will be able to dual boot? I have an empty partition of ~150GB ready for it.When I am installing OpenSUSE 11.3 I get this content in the boot section:
Code:
The bootloader is installed on a partition that does not lie entirely below 128 GB. The system might not boot.
[code]...
View 1 Replies
View Related
Sep 8, 2010
I am currently running windows 7, i would like to be able to dual-boot with openSuse 11.3 64-bit, at the moment I have two seperate partitions each 111gb in size and i wish to install suse onto the D: partition without effecting my windows installation or any data on the c drive.
When i got to the "Discs" stage of the installation i was very confused by this as i am completely new to Linux and dual-booting, i thought it would be a simple case of selecting my d: drive and installing straight to that but i cannot work out how to do this.
View 7 Replies
View Related
Sep 20, 2010
I currently have Ubuntu 10.04 LTS installed on my PC. The details of how it got installed I cannot explain... I installed it on a HD that was not partitioned and I accepted all the defaults that Ubuntu suggested. So as far as I know right now Ubuntu "owns" the whole HD.
I now would like to create a dual-boot system by installing openSUSE 11.3 alongside Ubuntu 10.04 LTS. By reading things here and there, my guess is that I need to create a partition for openSUSE by shrinking the one for Ubuntu. But I am really not sure.
So I downloaded the CD version (GNOME) only of openSUSE, launched the installer and the process came to the following suggestions which is basically all Greek to me:
* Delete partition /dev/sda1
* Create root volume /dev/sda1 with ext4
* Create volume /dev/sda3 for /home with ext4
* Use /dev/sda5 as swap
As I said before, what I would like to do is install openSUSE side-by- side with Ubuntu and create a dual-boot system. I do not want to delete Ubuntu! I got scared by that "Delete partition /dev/sda1" thing mentioned above and so I aborted the installation.
What is the installer suggesting? Has it realized that I already have Ubuntu installed and that I want to create a dual-boot system?
View 9 Replies
View Related
Apr 3, 2011
I'm dual booting Windows 7 and openSUSE. I attempted to start up my computer, and got ERROR 17 on the GRUB loading page. I am assuming this is related to me disabling the openSUSE uninstaller on startup in Windows.installer seemed completely superfluous.
View 9 Replies
View Related
Dec 9, 2009
I'm wondering how I would go about dual-booting Ubuntu with openSUSE installed first?
I'm just a little bit concerned about the versions of Grub overwriting the openSUSE version or theme or something.
Would it work okay if I just shrink my openSUSE partition and then set the Ubuntu installer to install Ubuntu to the free space only or do I need to edit the grub file and stuff?
View 3 Replies
View Related
Dec 25, 2009
I have an Acer Aspire One D150 with the following partition table:
I would like to free up a bit of space from the Win7 partition and install OpenSuse 11.2 KDE alongside my existing OS'es. Trouble is no matter what I do YAST wants to install OpenSuse in / and /home over the top of Ubuntu. It won't let me create any new mountpoints for / and /home. Furthermore, I've heard that even if I can successfully install OpenSuse I will face problems as Ubuntu uses Grub2 and OpenSuse still uses Grub-legacy.
View 9 Replies
View Related
Jun 24, 2010
i decided to install ubuntu in my PC,i downloaded the .ISO image and i installed it in my USB. After trying it and all that i observed that i really liked it and i decided to formally install it to my computer in the hard drive. When i reached the partition thing,i selected to dual boot with Vista and select between each them in every startup,when i clicked FORWARD it gave me an error which i did not read(because,again im a noob) so i clicked cancel.
Today i wanted to go through the process again and now really install it,so again i went to the time zone part and i clicked forward but then,instead of taking me straight to the partition phase,it appeard a window saying "The installer has detected that the following disks have mounted partitions: /dev/sda ...." I clicked yes,to unmount this partitions so it took me to the partition thing,once there i selected the option to install Ubuntu with Vista and select between them i neach startup,then i clicked forward and went to the username/computer name process,once i finished i continued to the next part,the installation,but i selected to import all of my WIndows VIsta default user data,after that i clicked forward and went to the installation process,i went down stairs to eat soemthing while it finishes,i came back and it was finished,it asked me to reboot so i clicked in Restart Now.
When it tried to boot,appeared an error saying: Error: no such devide found: #################### Grub load(or something like that) grub rescue: and it was a command line,since there i havent been able to boot into vista or Ubuntu,im really scared because is the first thing related to OS installing ive done,so i booted my USB and ran the trial and right now im trying to find out what to do from that trial version.
I just went to the INSTALL UBUNTU 10.04 LTS application under the System>Administration Menu and found out that in the partition phase the Install and allow to select between both systems in eahc startup option,i dont know what to do,i foudn out that my HD has still all its data(MUsic/Videos/Folders/Programs/ect.)its just that i cannot boot from it. Also in GParted it appears as /dev/sda1/ and a warning icon besides it,also when i go into information, thers this warning there [URL]
View 9 Replies
View Related
Jun 2, 2010
my Windows partition and the future Suse partition will be on different HDDs, so this should ease things a bit. Suse is on HDD 2 and Windows on HDD 1 HDD 2 will be the default Master drive, so I want GRUB to give me to option to boot either on Suse, either on Windows 7 I want to keep Windows 7 boot manager intact. I.E. If I switch HDD 1 to the Master drive, it will boot directly into Win 7.
What I wanted to do is:
Unplugg Windows drive
Install Suse
Replugg Windows drive and manually add the entry to GRUB
if I keep them both plugged, Linux will not touch HDD 1 MBR?
View 9 Replies
View Related
May 6, 2011
i've just got my gateway laptop which has a recovery option. Due to my observation, the computer has 3 primary partitions when I firstly got it: 12.7 GB, whose property is system recovery (empty and hidden); 100MB whose properties are ACTIVE, primary partition; partition C whose properties are BOOT, system, primary partition, crash dump and page file. Seems that when the machine starts, it firstly read the 100MB partition and then it is leaded to the partition C, where the windows 7 is installed. I SHRINKED THE PARTITION C AND CREATED 3 LOGICAL DRIVES.
Now I want to install OpenSuSE 11.4 on one of my logical drives. What should I do to keep all things well, which means I will be able to dual-boot and also keep my recovery function well? What's more, what I do not want is that the windows 7 cannot be chosen at boot or neither of them can boot!
View 8 Replies
View Related
Mar 7, 2009
I'm trying to achieve my dream (but indeed not perfect) boot scenario: dual-boot OpenSUSE and Fedora with shared /boot, /home and SWAP partitions. First I installed OpenSUSE (sda3 on my layout below) with separate /boot (sda2), /home (sda5, encrypted) and SWAP (sda6), next I installed Fedora on /dev/sda1, and pointed it to mount sda2, sda5, sda6 with respective mount points, without formatting. I proceeded with the installation without installing new GRUB bootloader (overwriting an existing one).
It was successfull and now I'm back in OpenSuSE trying to edit menu.lst file (under /boot/grub) to make GRUB boot Fedora.
I attached a copy of menu.lst I cooked up for now. OK, it's a mess. Life would be allot easier if I didn't have a separate /boot partition, as I could just chainload, but it's no longer possible (or is it?). May be I needed to specify the resume device or problem is in initrd? below are the contents of /boot:
View 4 Replies
View Related
Aug 3, 2009
yesterday i was interested in Ubuntu,so i got the Lice CD and tried it out for a bit, seemed really cool and i decided to install it! So i partition during the installation setup (Yes i defragged on Vista really well before that), and it loaded all the stuffs. So at the Grub screen i chose vista, let it understand the partition changes, and let it finish all of that. Then i went onto Ubuntu, almost to the interesting part,
So i tried to update, that worked, then it said to restart, so i restarted it and it said some line like:
*Shutting down now (not exact) In the white text on the black screen and it just sat there. So i Ctrl+Alt+Del it and it ran the Grub again, i went back into Ubuntu and tried to install my driver for my Graphics card (nVidia GeForce GT 130M w/1gb of vram)and it said it didnt come up with anything. So i decided to get rid of ubuntu cause i didnt know how it worked and because i fugured something was wrong or my computer couldnt function properly, or that i did something... Well anyways, so i go into Vista and knock out Ubuntus Partition.
So i restart Vista so it can recognise the changes in Partitions, and it gives me Grub Error 22! So i put the Live CD in and partition the drive and iand install Ubuntu again after trying to use Acers Recovery Disks that i made when i first got the computer (Thursday, and no they arent vista disks, there Acer Recov Disks) And it seemed to work fine, so im al ok. I workked on vista for awhile getting back my wiped Hdd, and i go to Ubuntu after to work on it.
it wont go into Grub, just boots to Vista, so once again i put in the Live CD and click install, and nitice that Ubuntus P:artition is Corrupted! So i delete the partition from Live CD and reinstal once again. now i did the Graphics card and updates on Ubuntu again and now i have mre errors then ever. Whenever i start up Ubuntu i get six mini screens on the screen and it gives me that line of words when i try and shut down/restart. It also wont let me change the Visual effects. Ubuntu seems like a pain in the butt right now, and unless theres any hopw of sucessfully dual booting then i wanna know how to get it off. I dont understand how linux works at all, and i feel much more comfortable using Vista, although Ubuntu may be cool n all.
View 2 Replies
View Related
Nov 12, 2010
When you install a dual-boot of Ubuntu, one of the frustrating things that you'll immediately notice is that Ubuntu is now set as the default operating system in the Grub loader. There's an easy way to switch back to using Windows as the default.
There are many way to change bootup options
This is one way to change bootup option
First you have to go system --> Administration and see for Startupmanager if it is not their
Now go to Applications --> Accessories --> Terminal and type
sudo apt-get install startupmanager It will ask for your password give it now It will ask Do you want to continue {y/n}? Type "y" and press Enter After installation is over close the terminal.
Now once again you have to go system --> Administration ---> now you will see a new Startupmanager button, just press that startupmanager button it will open a window
Enter your password to perform administrative task "now you have to give your password and press enter
now you will see startUp-Manager window in that you will see Timeout
Timeout in seconds: by default it is 10 second if you want, you have to increase the second 10,20 etc.,
Default operating system: by default it is Ubuntu
if you want to change click the Tab and you will see five options that is
Ubuntu with Linux 2.6.35.22 generic
Ubuntu with Linux 2.6.35.22 generic(Recovery mode)
Memory test (memtest86+)
memory (memtest 86+, serial console 115200)
Microsoft windows xp professional (on/ext/sda1)
and now you go to Microsoft windows xp professional (on/ext/sda1) and click it now it will change Ubuntu to windows just press close tab after closing that window you have to restart your system just wait for 10 second and see now your system will boot windows xp by default
View 2 Replies
View Related
Nov 13, 2010
I have a hard drive that I have partitioned into two large chunks. I have Fedora 12 on one, and I would like to put another distro on the other. I do most things on my Fedora, but on the Second distro, I'll be doing more sensitive things such as banking. If I wanted to "Lock out" the Banking distro, and only boot to it if I have an SD card or Flash drive, to act as a "key" would it be simple as putting the boot sector of the banking Distro onto the removable media, or is there something else I need to do?
to summarize, I'd like my system to automatically boot to Fedora, unless I have some form of removable media (preferably an SD card but Possibly a Flash drive) plugged in; in which case, I'd like it to boot to my banking Distro. What would be the easiest, way to go about this?
View 14 Replies
View Related
Nov 20, 2010
In my first article that is posted at 29.10.2010 "Installing Ubuntu 10.10 on a Windows 7 System (Dual booting) with Radeon X300/X550/X1050 SERIES Graphics Card". I got most of email in that most of the people are asked me to give step by step Installation method for Windows 7 and Ubuntu 10.10 in dual booting. So am trying to give you to installation method for both Operating Systems. I hope it will help to you for easy installation for Windows 7 and Ubuntu 10.10 in Dual booting method.
I have installed Windows 7 and Ubuntu 10.10 on HP dx 7200 micro towers.
System Information :-
Operating System: Windows 7 Ultimate 32-bit (6.1, Build 7201)
[code]....
View 2 Replies
View Related
Apr 28, 2010
I have 2 IDE drives, Windows XP is on the Master drive & Fedora 12 is on a partition the other drive. I purposely installed the Linux boot loader on the same drive as Fedora because want to use NTLDR as the primary boot loader. According to a guide I found [URL], I should be able to copy the Linux boot sector to a file & put that copy on the Windows drive & then modify boot.ini, so I am prompted to with an OS choice a startup.
The problem is the command the guide gives to copy the Linux boot sector (dd if=/dev/hdb1 of=bootsect.lnx size=512 count=1) has outdated syntax and does not work. What syntax would make this command work in Fedora 12? Another guide I found ([URL]-vista-already) suggested using: Grub4Dos & modifying boot.ini. This method almost worked until grub gave an error that there was no kernel loaded. What would I type into the grub prompt to load the kernel? How would I automate the loading of the kernel, so I don't have to specify the kernel each time?
View 6 Replies
View Related
Jul 4, 2011
I just found out about Linux and well I love it, it's fast, sleek and easy to use design make it rise above the competitors. So this is where I'm at. I have the latest version of Fedora on a thumbdrive and I when the thumbdrive is plugged in and I turn it on it boots up Fedora, but everytime I turn it off I lose all data and I start a fresh session. So when I got to instal Fedora to my hard drive. [URL]
Now I read a few articles on how to do partitions but, all of them want me to put in the original windows 7 instal cd/dvd into my laptop and somehow partition. But here's the thing I'm on a Compaq Mini real solid computer I love it but thats beside the point. What it really comes down to is how I do I get this dual boot working without having to reset everything and pretty much is there alternative for partitioning.
View 14 Replies
View Related
Jan 27, 2010
Dual booting suselinux with Windows 7, when I boot into either OS I need to reset the PC clock. The clock is off by 6 hours, which coincidentally is the difference between my time zone and GMT, -6 hours. Its not six hours behind but rather six hours ahead of my local time. My interpretation the setting for my local time zone is not being saved? Or are they being overridden by the OS'es? Both OS have the same time zone setting, Central Standard Time USA?
View 2 Replies
View Related
Jan 13, 2010
How to put ophcrack on linux because of my supposed intentions of plugging it in waiting 20 mins and cracking passwords wherever people do this I know having to waste my space triple booting the thing with Ophcrack XP/Vista and BackTrack. How does one go about dual booting a flash drive? I could not find much on the internet.
View 1 Replies
View Related
Jul 27, 2011
What happens if I write over Pardus2011 with another OS such as Fadora or Suse? Does the boot loader stay? I really can't risk losing everything on my windows partition. If I can, when installing do I ignore installing a new boot loader? It usually asks...
View 4 Replies
View Related
Sep 27, 2010
I bought a new laptop having the following specs:Processor: Intel I5RAM: 6GBHD: 500 GBVideo card: nvidia with cuda with 1 GB RAM.My Hard Disc already has 3 partitions: C=448 GBs (where windows 7 is installed=64 bit) D:Recovery (16.5GBs) and E:HP_TOOLS (99MB).I want to have dual boot and install linux also. BUT I dont want to delete the other partitions as well. How do I do that?Am I able to shrink C partition without disturbing windows installation and creat another partition in C drive? What it will be called: Primary or logical partition?
View 3 Replies
View Related
Sep 26, 2010
I have a windows 98 box.I have a slax ISO and a slax TAR. My slax TAR has all the modules I want.
My windows 98 hard drive has only 1 partition and is fully formatted.I have used windows 98 to download my TAR.I want to dual boot slax and windows 98.How do I go about this? So do I have to repartition?
View 7 Replies
View Related
