I have a hard drive that I have partitioned into two large chunks. I have Fedora 12 on one, and I would like to put another distro on the other. I do most things on my Fedora, but on the Second distro, I'll be doing more sensitive things such as banking. If I wanted to "Lock out" the Banking distro, and only boot to it if I have an SD card or Flash drive, to act as a "key" would it be simple as putting the boot sector of the banking Distro onto the removable media, or is there something else I need to do?
to summarize, I'd like my system to automatically boot to Fedora, unless I have some form of removable media (preferably an SD card but Possibly a Flash drive) plugged in; in which case, I'd like it to boot to my banking Distro. What would be the easiest, way to go about this?
i decided to install ubuntu in my PC,i downloaded the .ISO image and i installed it in my USB. After trying it and all that i observed that i really liked it and i decided to formally install it to my computer in the hard drive. When i reached the partition thing,i selected to dual boot with Vista and select between each them in every startup,when i clicked FORWARD it gave me an error which i did not read(because,again im a noob) so i clicked cancel.
Today i wanted to go through the process again and now really install it,so again i went to the time zone part and i clicked forward but then,instead of taking me straight to the partition phase,it appeard a window saying "The installer has detected that the following disks have mounted partitions: /dev/sda ...." I clicked yes,to unmount this partitions so it took me to the partition thing,once there i selected the option to install Ubuntu with Vista and select between them i neach startup,then i clicked forward and went to the username/computer name process,once i finished i continued to the next part,the installation,but i selected to import all of my WIndows VIsta default user data,after that i clicked forward and went to the installation process,i went down stairs to eat soemthing while it finishes,i came back and it was finished,it asked me to reboot so i clicked in Restart Now.
When it tried to boot,appeared an error saying: Error: no such devide found: #################### Grub load(or something like that) grub rescue: and it was a command line,since there i havent been able to boot into vista or Ubuntu,im really scared because is the first thing related to OS installing ive done,so i booted my USB and ran the trial and right now im trying to find out what to do from that trial version. I just went to the INSTALL UBUNTU 10.04 LTS application under the System>Administration Menu and found out that in the partition phase the Install and allow to select between both systems in eahc startup option,i dont know what to do,i foudn out that my HD has still all its data(MUsic/Videos/Folders/Programs/ect.)its just that i cannot boot from it. Also in GParted it appears as /dev/sda1/ and a warning icon besides it,also when i go into information, thers this warning there [URL]
I had dual boot on my Asus laptop, Windows and Hardy. Then my Windows XP crashed and the person who repaired installed Windows 7 but didn't preserve the dual boot prompt on startup. I've explored BIOS but there seems no way of accessing my Ubuntu partition that way.
I have 2 IDE drives, Windows XP is on the Master drive & Fedora 12 is on a partition the other drive. I purposely installed the Linux boot loader on the same drive as Fedora because want to use NTLDR as the primary boot loader. According to a guide I found [URL], I should be able to copy the Linux boot sector to a file & put that copy on the Windows drive & then modify boot.ini, so I am prompted to with an OS choice a startup.
The problem is the command the guide gives to copy the Linux boot sector (dd if=/dev/hdb1 of=bootsect.lnx size=512 count=1) has outdated syntax and does not work. What syntax would make this command work in Fedora 12? Another guide I found ([URL]-vista-already) suggested using: Grub4Dos & modifying boot.ini. This method almost worked until grub gave an error that there was no kernel loaded. What would I type into the grub prompt to load the kernel? How would I automate the loading of the kernel, so I don't have to specify the kernel each time?
I would like to install OpenSUSE 11.4 on the same hard drive where Ubuntu 10.10 resides. I have plenty of free space following the Ubuntu partitions to do this.
I typically create three partitions: a root (/) mounted partition, a swap partition, and a home (/home) mounted partition.
I have these questions:
Is it advisable to load two Linux OS's on the same drive or would this be problematic?
If advisable, then: Can I use the same swap partition for both Ubuntu and OpenSUSE (as I plan to run only one OS at a given time)?
How will this effect booting (as Ubuntu uses GRUB2 while OpenSUSE uses GRUB)? Will the GRUB OS selection menu successfully display the two OS's for selection? If not, can I fix the problem through GRUB commands?
I am keeping Windows 7 completely separate with its own boot block. I do this by turning off appropriate hard drives during installations. Thereafter, I use F12 when prompted during boot-up to select the Linux (default) or Windows boot drive. When I boot through the Linux hard drive, I would like the Ubuntu or OpenSUSE Linux OS to be selectable through GRUB (or GRUB2).
I just found out about Linux and well I love it, it's fast, sleek and easy to use design make it rise above the competitors. So this is where I'm at. I have the latest version of Fedora on a thumbdrive and I when the thumbdrive is plugged in and I turn it on it boots up Fedora, but everytime I turn it off I lose all data and I start a fresh session. So when I got to instal Fedora to my hard drive. [URL]
Now I read a few articles on how to do partitions but, all of them want me to put in the original windows 7 instal cd/dvd into my laptop and somehow partition. But here's the thing I'm on a Compaq Mini real solid computer I love it but thats beside the point. What it really comes down to is how I do I get this dual boot working without having to reset everything and pretty much is there alternative for partitioning.
Dual booting suselinux with Windows 7, when I boot into either OS I need to reset the PC clock. The clock is off by 6 hours, which coincidentally is the difference between my time zone and GMT, -6 hours. Its not six hours behind but rather six hours ahead of my local time. My interpretation the setting for my local time zone is not being saved? Or are they being overridden by the OS'es? Both OS have the same time zone setting, Central Standard Time USA?
How to put ophcrack on linux because of my supposed intentions of plugging it in waiting 20 mins and cracking passwords wherever people do this I know having to waste my space triple booting the thing with Ophcrack XP/Vista and BackTrack. How does one go about dual booting a flash drive? I could not find much on the internet.
My PC is an older model Toshiba Satellite that I've upgraded a bit to handle Windows 7 Ultimate x64.
Recently, I joined a CST program at a local college, and there is an entire mod on Linux. I'm at the top of my class, and I aim to stay that way, so I found out what distro they were using, and downloaded openSUSE 11.3. I tried to install it once, and I failed, though I didn't screw up my Windows...much.
I've created an entire 132GB partition, and a 3 or 4GB swap, but I keep getting an error about the boot loader not being on a partition entirely below 128GB. So, I set the partition for 127.98GB, and still with the error.
I'm no slacker when it comes to working with Windows, but when it comes to Linux, of any type, I'm horrible. I need to be able to install the fully functional openSUSE OS alongside my Windows 7 Ultimate, without completely screwing my Windows install up. I can recover, so I'm not afraid to try new things.
yesterday i was interested in Ubuntu,so i got the Lice CD and tried it out for a bit, seemed really cool and i decided to install it! So i partition during the installation setup (Yes i defragged on Vista really well before that), and it loaded all the stuffs. So at the Grub screen i chose vista, let it understand the partition changes, and let it finish all of that. Then i went onto Ubuntu, almost to the interesting part, So i tried to update, that worked, then it said to restart, so i restarted it and it said some line like:
*Shutting down now (not exact) In the white text on the black screen and it just sat there. So i Ctrl+Alt+Del it and it ran the Grub again, i went back into Ubuntu and tried to install my driver for my Graphics card (nVidia GeForce GT 130M w/1gb of vram)and it said it didnt come up with anything. So i decided to get rid of ubuntu cause i didnt know how it worked and because i fugured something was wrong or my computer couldnt function properly, or that i did something... Well anyways, so i go into Vista and knock out Ubuntus Partition.
So i restart Vista so it can recognise the changes in Partitions, and it gives me Grub Error 22! So i put the Live CD in and partition the drive and iand install Ubuntu again after trying to use Acers Recovery Disks that i made when i first got the computer (Thursday, and no they arent vista disks, there Acer Recov Disks) And it seemed to work fine, so im al ok. I workked on vista for awhile getting back my wiped Hdd, and i go to Ubuntu after to work on it.
it wont go into Grub, just boots to Vista, so once again i put in the Live CD and click install, and nitice that Ubuntus P:artition is Corrupted! So i delete the partition from Live CD and reinstal once again. now i did the Graphics card and updates on Ubuntu again and now i have mre errors then ever. Whenever i start up Ubuntu i get six mini screens on the screen and it gives me that line of words when i try and shut down/restart. It also wont let me change the Visual effects. Ubuntu seems like a pain in the butt right now, and unless theres any hopw of sucessfully dual booting then i wanna know how to get it off. I dont understand how linux works at all, and i feel much more comfortable using Vista, although Ubuntu may be cool n all.
What happens if I write over Pardus2011 with another OS such as Fadora or Suse? Does the boot loader stay? I really can't risk losing everything on my windows partition. If I can, when installing do I ignore installing a new boot loader? It usually asks...
I bought a new laptop having the following specs:Processor: Intel I5RAM: 6GBHD: 500 GBVideo card: nvidia with cuda with 1 GB RAM.My Hard Disc already has 3 partitions: C=448 GBs (where windows 7 is installed=64 bit) D:Recovery (16.5GBs) and E:HP_TOOLS (99MB).I want to have dual boot and install linux also. BUT I dont want to delete the other partitions as well. How do I do that?Am I able to shrink C partition without disturbing windows installation and creat another partition in C drive? What it will be called: Primary or logical partition?
I have a windows 98 box.I have a slax ISO and a slax TAR. My slax TAR has all the modules I want.
My windows 98 hard drive has only 1 partition and is fully formatted.I have used windows 98 to download my TAR.I want to dual boot slax and windows 98.How do I go about this? So do I have to repartition?
I had Ubuntu 10.04 on this machine and wanted to convert it to a dual boot. It's a 500GB hard drive. The HDD had 3 partitions: one really big one, and two swap areas of about 6 GB each. I ran GParter and carved the big partition into a 100GB partition and a 400GB partition (less the swap areas). Then I installed Windows XP into the 100GB partition, then installed Ubuntu 10.04, selecting the "create dual boot" option.
It dual boots beautifully, and everything runs just fine. But I find that Ubuntu has split the 400 GB partition into two 200 GB partitions, and one of them is simply off-limits. I can see it, but I can't write to it. The attached png shows the Disk Utility, with the mystery partition selected. Its only contents is a folder called lost+found; I cannot open it.
I was wondering if it were possible to have a dual boot system (XP and Debian) where when you press, say F7, you will boot into windows or if your press F6 you will boot into Linux. I have a monitor that doesn't support the initial start-up graphics
I have just installed Fedora 12 on a 10GB partition separate from the pre-existing Windows XP partition. My problem is that when I turn on my aspire one ao751h it doesn't give me the option to boot Windows XP even though when I mount the partition with XP on it the files are all still there. I think it has something to do with GRUB which I have never dealt with before or the way I set up the partitions when installing Fedora 12. How would I change the start-up screen to allow me to boot from my XP partition as well?
I tried to dual boot my lenovoT6570 with Fedora14 and win7. But the linux becomes extrememly slow and the firefox window cannot even be clicked. I reinstalled the linux again but the same problem persists. Is it compatible with dual booting? any solution or suggestion?
I am a bit confused about a dual booting system. I Already have windows 7 on my computer and wish to install ubuntu 11.04 but I keep reading about Grub 2. Does grub automatically install with ubuntu or do I need to install it prior to installing ubutu ?
When you install a dual-boot of Ubuntu, one of the frustrating things that you'll immediately notice is that Ubuntu is now set as the default operating system in the Grub loader. There's an easy way to switch back to using Windows as the default.
There are many way to change bootup options
This is one way to change bootup option
First you have to go system --> Administration and see for Startupmanager if it is not their
Now go to Applications --> Accessories --> Terminal and type
sudo apt-get install startupmanager It will ask for your password give it now It will ask Do you want to continue {y/n}? Type "y" and press Enter After installation is over close the terminal.
Now once again you have to go system --> Administration ---> now you will see a new Startupmanager button, just press that startupmanager button it will open a window
Enter your password to perform administrative task "now you have to give your password and press enter now you will see startUp-Manager window in that you will see Timeout
Timeout in seconds: by default it is 10 second if you want, you have to increase the second 10,20 etc.,
Default operating system: by default it is Ubuntu
if you want to change click the Tab and you will see five options that is
Ubuntu with Linux 2.6.35.22 generic Ubuntu with Linux 2.6.35.22 generic(Recovery mode) Memory test (memtest86+) memory (memtest 86+, serial console 115200) Microsoft windows xp professional (on/ext/sda1)
and now you go to Microsoft windows xp professional (on/ext/sda1) and click it now it will change Ubuntu to windows just press close tab after closing that window you have to restart your system just wait for 10 second and see now your system will boot windows xp by default
In my first article that is posted at 29.10.2010 "Installing Ubuntu 10.10 on a Windows 7 System (Dual booting) with Radeon X300/X550/X1050 SERIES Graphics Card". I got most of email in that most of the people are asked me to give step by step Installation method for Windows 7 and Ubuntu 10.10 in dual booting. So am trying to give you to installation method for both Operating Systems. I hope it will help to you for easy installation for Windows 7 and Ubuntu 10.10 in Dual booting method.
I have installed Windows 7 and Ubuntu 10.10 on HP dx 7200 micro towers. System Information :- Operating System: Windows 7 Ultimate 32-bit (6.1, Build 7201)
I have Vista Home edtion and Linux, I have formatted Linux partions and now that Grub is not letting me boot into Windows..I had C:wIndows D:New Volume and rest of the space was E:
I am about to work on getting the workstations on my network here to be connected to the Active Directory on my Windows 2003 server using Likewise Identity Service. of the security requirements is a good time sync, so I am trying to setup my Windows server time server on my CentOS machines. These machines dual boot Windows 7 and CentOS 5.5. I am using the Windows server as a time server and it's getting its time from its CMOS.llowing a microsoft kb article. I removed all the time servers from the CentOS box I am experimenting with and added the IP of my Windows server, it seems to connect ok but theime never gets updated.Oh, and this network has no connection to the internet it's cut off from the world, so sad and lonely and cannot get internet time
I have successfully installed an ATI EAH4350 (Radeon 4350) to work as a dual head in Ubuntu 10.04 but there is a bug though, which I noticed given the following scenario:
* Dual Head config (Multi-desktop) * Monitor 1 - Running firefox and terminal * Monitor 2 - Running WinXP in Virtual Box 3.1.6 - Virtual Box is in full screen mode - WinXP is showing a flash movie using firefox also full screen mode * Monitor 2 is configured above Monitor 1.
Sometimes the mouse gets trapped at the top of Monitor 1 (in between the two monitors). Keyboard doesn't function as well but the currently running apps continue to operate "normally". Ctrl + Alt + Fx doesn't work.
What is frustrating is when it happens it's beyond my control. I can't do anything else besides reset the PC.
just like most Linux distributions, will happily co-exist on a hard disk with just about any version of Windows. This is a concept known as dual-booting. Essentially, when you power up your PC you will be presented with a menu which provides the option to boot either Ubuntu Linux or Windows. Obviously you can only run one operating system at a time, but it is worth noting that the files on the Windows partition of your disk drive will be available to you from Ubuntu Linux regardless of whether your windows partition was formatted using NTFS. To day I have installed Latest Windows 7 and Latest Ubuntu 10.10 on my office system (Dual booting). This two operating system which I installed in HP dx 7200 micro towers.
System Information Operating System: Windows 7 Ultimate 32-bit (6.1, Build 7201) (7201.winmain_win7ids.090601-1516) Language: English (Regional Setting: English) System Manufacturer: Hewlett-Packard System Model: HP Compaq dx7200 Microtower BIOS: Default System BIOS
I had Windows 7 and Windows XP. It was 3 partitions in one HD (two OS' and one for files) and another separate HD (which doesn't have any system, it's just media files and stuff). When booted, I used to get the Windows 7 screen, that allowed me to either boot 7 or XP. I thought I had tested 7 enough and wanted to try Ubuntu, so I (from the Ubuntu CD which I downloaded and burned) deleted the 7 partition and made a 2GB swap partition, and, what was left, an Ubuntu partition on which I installed it.
Now when I boot I get an Ubuntu boot screen that shows several Ubuntu options and a WinXP option. Ubuntu works fine, but if I choose WinXP, I get "Error 12: Invalid device requested". I didn't change anything more than what I said. The details for the WinXP boot option seem to be:
What can I do to be able to boot WinXP again? (and also Ubuntu, whenever I want to). The only thing I can think of is using Windows XP CD's restore thing to restore the boot menu, but that would stop me from using Ubuntu...
I've read that, when configuring a dual-boot system, you should install Windows first to avoid any issues.Some questions: I'm assuming this has to do with the boot loader so: How is Windows boot loader so different that this matters? If I'm totally off, please explain.Is this the same case with Windows 7 and Windows XP? Depending on question 1 of course: Will installing Windows later on mean that it will definitely not work or just that you might encounter issues later on? Some tutorials are kind of ambiguous about that point.
I currently have a dual boot system with XP and Ubuntu 10.04 32bit.I need to do a complete reinstall of the XP and am thinking that this would be a good time to transfer Ubuntu to a bigger drive and maybe install the 64bit version. My computer is a few years old but the Core Duo should be able to handle 64bit.
I am wondering though that since I have an old printer, scanner, web cam, etc. whether I would have problems with my system running 64bit. I am also concerned as to whether the software in the library would work properly (if they are not 64bit).There is no pressing reason for me to run 64bit except curiosity so if it will cause problems I can wait.
When I installed 32-bit linux first, and later when I installed 64-bit linux on a different partition.. then the computer wouldn't boot either linux properly..I'd like to hear from people who installed both 32-bit , 64-bit redhat linux successfully.
Alright so I am trying to setup a dualboot with desbian on windows 8.1. I have it installed on a usb using Unet, got secure startup disabled as well as fast startup, and I have USB first on the boot menu, but when I restart it just loads as normal and doesn't boot up the usb.
I run an Intel DP35DP motherboard with 3.0 gig Intel processor with 4 gig of ram. Two 500 gig Sata hard drives. The first hard drive is for Windows XP. The second hard drive is four 6 different flavors of Linux and Data backups. Drive 2 the first 120 gigs is split into six 20 gig partitions with a 2 gig swap file. The second 370 gig is for file backups and Norton Ghost 2009 images.
Install Fedora 11 on the second hard drive and use the automatic partitioning tool but don't put grub on your Master MBR put it on the root partition on your second drive. When you get to the Boot Loader Configuration screen make sure you check the Configure advanced boot loader options. The next screen will give the option where to put Grub Boot Loader. It should say like sda or sdb. Sda is usually your XP Drive. From their finish loading. Put Grub on Sdb?.
Now duel booting using XP boot manager.
Go to [url] and download Bootpa26.zip (It's freeware) Unzip the file and it will make a directory called Bootpart. From the Windows command line change directories to C:ootpartootpa26. Run the command bootpart. This is what you should see.
If youll notice I highlighted in red. That is you�re first Linux root partition 1: D:* Type=83
Run the command Bootpart 1 fedora11.lnx Fedora 11 Leonidas
