Ubuntu Networking :: Internet Printing - Serve As Printer Server Have An Error Message In Cups/error_log
Dec 28, 2010
I have been able (with some hair pulling and gnashing of teeth) to print from outside the LAN to the printer connected via USB to the desktop computer at home, until the last upgrade. The laptop will forst say the printer may not be connected, but eventually (usually) after a while says the job was sent to the printer. The log files on the desktop - serving as the printer server have an error message in cups/error_log that I am not familiar with, and don't believe I have seen before. I am sure if I could decipher that error and figure out how to change the behavior to get rid of it, it would once again work. Printing from within the LAN is a no-brainer as it has been for the last several releases. The error that I get when trying to print outside the LAN (via the internet) is:
cupsdAcceptClient: 12 from <WAN IP>:631 (IPv4) Unable to encrypt connection from <WAN IP> - GnuTLS internal error. I am missing something as far as authentication from the laptop to the desktop. how to fix it.
View 1 Replies
ADVERTISEMENT
Apr 1, 2011
I am trying to install a HP deskjet 1000-J110a. I downloaded a driver package thing, and I guess I unpacked it, and I made it, and I thought I installed it. I am totally confused and my brain hurts. The printing troubleshooter is telling me: Missing Printer Driver
Printer 'Deskjet-1000-J110-series' requires the 'foomatic-rip-hplip' program but it is not currently installed. I found something that is the 'foomatic-rip-hplip', but what the heck do I do with it?
View 9 Replies
View Related
Jan 20, 2011
I'm running Red Hat Linux and CUPS 1.2.4. I can print a test page to a Win 7 shared printer ok. However, when I issue the lpr command from a user or root, it won't print. The CUPS message is "Remote host did not accept data file (1)" and the job just hangs till I cancel it. The only thing I can tell that is different is that when the test page from CUPS is generated, it uses user "guest". When I try to print it using the lpr command, the user is "eddie" or "root". I tried adding a user account named "eddie" to the Win 7 box, I can print successfully from both CUPS and users on several other Win XP boxes.
View 11 Replies
View Related
Jun 25, 2011
I have been printing with this laser printer (connected via LAN) for months without a single glitch, when suddenly today I had to quickly print a document. I could not print it. At first I thought the printer was off, then I double checked it was on. I restarted the CUPS server, reinstalled the printer in CUPS, nothing will work. When I send a print job, (I am using XFCE btw), I see the printer icon in the tasktray and it has a small warning sign.
Opening the print queue, I see "Processing - Printer Warning". In cups, I see nothing unusual. It says (in the printer queue): processing since Sat 25 Jun 2011 10:13:30 AM EDT. I can print a test page FROM the Printer web interface, confirming the printer works. I can print with the other printers. CUPS detects the printer and does not report anything unusual. What is going on with CUPS?
View 8 Replies
View Related
Jun 17, 2009
I'm trying to install and configure a printer (networked Brother HL4040CN), but I'm getting an error dialog when I click on "New" in the printer configuration GUI.
Action 1) Click on "New"
Response 1) a) "Authentication (fetching device list)" dialog box, request password for root.
Response 1) b) "Returning HTTP Forbidden for CUPS-Get-Devices (no URI) from localhost" appended to /var/log/cups/error_log
A2) Type root password and press enter in "Authentication" dialog box
R2) a) "CUPS server error" box, "There was an error during the CUPS operation: 'server-error-internal-error'.
R2) b) /var/log/cups/error_log:
Code:
E [17/Jun/2009:08:14:12 -0400] Unable to execute /usr/lib/cups/daemon/cups-deviced: insecure file permissions (0100777)
E [17/Jun/2009:08:14:12 -0400] Returning IPP server-error-internal-error for CUPS-Get-Devices (no URI) from localhost
A3) Click "OK" button in "CUPS server error" box
R3) a) "New Printer" dialog box opens
R3) b) /var/log/cups/error_log:
Code:
E [17/Jun/2009:08:17:10 -0400] Unable to execute /usr/lib/cups/daemon/cups-driverd: insecure file permissions (0100777)
E [17/Jun/2009:08:17:10 -0400] Returning IPP server-error-internal-error for CUPS-Get-PPDs (no URI) from localhost
A4) Enter "lpr://192.168.1.2" and click "Find" button under "Seelct Device->Network Printer->Find Network Printer"
R5) "No printer found at that address."
Any ideas? I have installed the RPMs from Brother's web site for both LPR and CUPS-wrapper
View 4 Replies
View Related
Jun 17, 2010
I noticed that a bit after I had updated Ubuntu 10.04 through the Update Manager, I couldn't print at all! (I run ubuntu 10.04 on my laptop and have a networked HP Officejet 6110xi all-in-one printer connected to a comp running Windows XP home on the same LAN). Everything works when I boot up in windows vista, so the problem is definitely in Ubuntu.
First, I checked the printer jobs and it said that there was an error with a filter or something. Restarting the job didn't do squat, so I decided to try reinstalling my printer, but get the same CUPS error "error-client-not-possible" right after I click "Apply". I then Googled the issue but didn't find much of anything, so I thought I'd try reinstalling CUPS. No luck there either... Same error again and again.
View 3 Replies
View Related
Jul 8, 2011
server not exporting CUPS printer?
View 9 Replies
View Related
Nov 1, 2010
I have been working through setting up a CUPS server on my Dell Dimension 2000 which is running Ubuntu 10.04. I have the server set up and the printer added and have gone through all of the steps the tutorials suggest to get the printer to be viewed on the network (set it to shared, allow other machines to view shared printers, etc). However, I can't find this printer on any of the other machine on my LAN (one machine running mac os x the other running Ubuntu 10.10).
View 2 Replies
View Related
Feb 17, 2011
I have Ubuntu LTS 10.04.2 x86-64 running with default Cups installed. Now I am trying to print on a Canon iRC1021i network printer using a x64 PPD file. Trying to print a test page delivers a "server-error-internal-error".
After this I ran the debugging mode which delivered the troubleshooting.zip file.
View 8 Replies
View Related
Nov 30, 2010
I'm not looking to setup a print server. I want to print documents TO an existing network printer while I'm logged in via ssh to my Ubuntu Server 10.4 command line shell. Things like admin emails, pdf docs, etc.
All the clients on my LAN are able to print directly to the network printer without any help from the Ubuntu Server. I don't want to setup CUPS on the server unless that's the only way to print from the server itself to a networked printer.
Do I need CUPS or can I print from the command line in some other way?
View 4 Replies
View Related
Jun 25, 2009
I googled this, to no avail. I've restarted cups, to no avail.This is a Networked Printer, but i have little doubt that can be ruled out as an issue.If i want to print an Image or Plain Text file, i get this error; if i print with OpenOffice, i do NOT get this error and it prints fine.I have also gotten a similar error, like "permission denied" or something, but i cannot recall exactly what it said, and cannot seem to recreate it at the moment.I have been getting this for quite some time now (months), but never found out why. Any ideas?
View 14 Replies
View Related
Feb 20, 2011
At my work we use CUPS to maintain all of our printers. I'd like to use Ubuntu to print a ton of files in a directory. What command would I use to print all files ending in ".html" to a specific printer? I tried some command and all it printed was stacks of pure junk. Is there an option to choose a certain tray to print from?
Would the command be
Code:
lpr -p(printername) *html
?
I have no idea how to specify a certain tray.
View 2 Replies
View Related
Apr 8, 2010
I just brought up a new server on RHEL4 to replace an existing older one. The server is using CUPS for printing. I copied the cupsd.conf, printers.conf, and lpoptions files over from the old server. I also copied the printer files in the /etc/cups/ppd directory over to the new server. But I can't get printing to work. And when I run system-config-printer-tui I don't see any of the printers in the dialog box. What other file(s) am I missing?
View 1 Replies
View Related
Apr 2, 2010
I am doing work at an office that only uses Linux Ubuntu 9.10 . They have wireless printing setup on all of the computers there, except one of them isn't working. I was not the one who setup the wireless printers so I'm not clear on how to do this.
View 2 Replies
View Related
Jul 8, 2015
I have set-up a stand-alone CUPS server with the intention to configure printer drivers and queues at a central point. The idea was that all workstations simply get announced this server and use whatever it offers. But I cannot get it to work. I cannot find any way to use any external server other than configuring a local server, which may use the remote queues, but still requires all printer drivers locally. Furthermore, I have to set up each remote queue explicitly, i.e. to me having the remote server makes no sense.
View 1 Replies
View Related
Feb 4, 2010
I have an ubuntu server with a printer plugged to it through USB. I used to set the server ip on the Printing panel to print remotelly to it, but it doesn't work anymore since I upgraded to karmic. I can see the printer in the printer panel, and I can even print a test page through the panel, but I can't print from any other application. When I come to the printing screen, the printer has the message retrieving information from printer and I can't print. I guess the cups server is working well as I can print the test page, and I used to print with hardy, looks like if the changes made in the printing panel don't have any effect on the system.
View 1 Replies
View Related
Jul 6, 2010
I'm trying to setup a cups printing server, but I want the default admin to not be root. Google has given me a couple hints and the cups administration page a little further but I'm now stuck at the end.What I want is a user called admin who belongs to the group printadmin as cups server administrator.What I have done1) I have created a local user called admin user yast user interface , and a group called printadmin. Added admin to the group printadmin2) I changed the line in /etc/cups/cupsd.conf.SystemGroup sys roottoSystemGroup printadmin 3) Changed all instances of of Authtype from Basic to Digest (Allows me to have a file called passwd.md5 in /etc/cups/ with the name of the allowed cups admins inside)4) Ran the following command to create and add admin.Code:lppasswd -a -g printadmin dmin This is what I receive after running the commandlppasswd -a -g printadmin administratorEnter password:Enter password again:lppasswd: Die Kennwortdatei wird verwendet!
View 3 Replies
View Related
May 24, 2011
Since last few weeks i am struggling to setup printer connected to print server.
Here is the setup that i have:
I have Red Hat Linux machine from which i want to issue print jobs.
I have Windows Print Server having multiple printers connected to it.
I am able to print jobs from Windows client to any of these printers. But i am not able to print from Red Hat Linux. (i have verified that i can print using smbclient utility, but based on my reading, CUPS API could be used from application to discover, print and issue print jobs.)
I am not able to get the correct configuration for setting up CUPS client.
View 3 Replies
View Related
Feb 24, 2011
cups does not start with the server. When I try to start from the terminal I get the error message
cupsd: Unable to read configuration file '/etc/cups/cupsd.conf' - exiting!
cupsd: Child exited with status 1!
The log files show nothing. cupsd.conf exists. It is user - root and group - root with permissions set at 0644.
My interpretation of this is that the program is not launching from either boot or terminal for a fundamental reason. I do not quite see what that reason is .
View 2 Replies
View Related
Mar 14, 2009
Apologies if this was asked before -- I have googled the last bytes out of my Firefox but fail to find anything helpful. Here's my problem:I have a foomatic hpijs cups-driver for a HP Inkjet (Non-PS printer) installed. Printing from UNIX-hosts works. I have cups configured not to allow raw-printing (/etc/cups/mime.types: #application/octet-stream, /etc/cups/mime.convs: #application/octet-stream).I have now installed samba-printing, the cups PS-drivers plus the Windows PS-drivers are populated to /etc/samba/drivers/W32X86/ and get pushed to the WIN-Client.Problem is that when I print from a WINXP client, the printer outputs heaps of Postscript-text instead of my page.I have tried to debug this a bit but fail to find anything really useful. My observations so far:
- The samba-pushed HP_Photosmart_3300.ppd (in both /etc/samba/drivers/... and in the resulting dir on the WINXP client) reads:
*cupsFilter: "application/vnd.cups-postscript 0 foomatic-rip"
[code]....
View 2 Replies
View Related
Nov 2, 2010
server not exporting CUPS printer?
View 2 Replies
View Related
Jul 2, 2010
Running Debian 5, fairly new install. I have CUPS 1.38 installed. After much work, I got a PPD file for a Dell printer working - albeit not the exact one I need (5330dn), but close enough to work (3100cn). Question: when I look at the list of printers in CUPS, I see a bunch of extra printers that are on the network, but that I didn't add. How do I remove them (ie. I don't want them to be listed)?Going to Administration | Manage Printers shows me a black button named "Delete Printer", but clicking on it gives me an error message of:
Ok, while I'm here, I'll ask 2 other simpler questions:
(2) anyone have the .ppd file for the Dell M5330dn printer? I've spent 90 minutes on the phone w/ the Dell tech support, and those guys are clueless....
(3) I have 4 printers of the same model. the first is working - is there an easy (command line) way of adding the other printers? Ie. can I just copy the /etc/cups/ppd file 3 times, renaming it to my other printer names (and ip addresses)?
View 6 Replies
View Related
Apr 28, 2010
I've recently decided to migrate the infrastructure in my workplace from ubuntu to fedora, every thing except the printers went perfectly. When I try to print as an user It just throws an generic error and stops, as a root it doesn't even show the error.
This is the debug log:
Code:
D [28/Apr/2010:04:22:03 +0200] cupsdSetBusyState: Dirty files
D [28/Apr/2010:04:22:03 +0200] cupsdReadClient: 12 POST / HTTP/1.1
D [28/Apr/2010:04:22:03 +0200] cupsdSetBusyState: Active clients and dirty files
D [28/Apr/2010:04:22:03 +0200] cupsdAuthorize: No authentication data provided.
D [28/Apr/2010:04:22:03 +0200] cupsdReadClient: 12 1.1 Get-Jobs 1
D [28/Apr/2010:04:22:03 +0200] Get-Jobs ipp://localhost/printers/ .....
It worked fine in debian and ubuntu, so we can assume that the drivers are ok, any ideas?
View 5 Replies
View Related
Jun 17, 2009
I've been at this mess pardon my french for a few hours and i'm still going nowhere, original thread posted over at archlinux forums:Since my printer isn't visible on my server (works just fine on my client) I tried to manually add various URI (tried em all) and I went from "printer location not found, waiting for jobs, to printer isnt running".
In my opinion it should be working but it's not, i've read the linux printer database/various linux forums/#cups on freenode (idled for 2 days no response)/gentoo wiki/forums and the old tool "google" but most of the "hacks" I tried didn't work.There's a lot of google links with issues similars to my own and alas they are all unresolved, is this a typical problem with unix/CUPS over servers/network?Why is it so difficult for CUPS to detect my printer over my server?
View 5 Replies
View Related
Nov 9, 2010
Is it possible to use CUPs to share an already networked printer using IPP? The printer itself uses IPP.I know at first look this may seem like a silly thing to do, however I have a special case to set up a "print proxy server" due to security compliance reasons
View 1 Replies
View Related
Jun 20, 2011
I am probably going to get blasted for this statement which is a result of four days of frustration.There are many people on here who are having problems getting their printers to work with Ubuntu. In my case it is version 10:04. I have been reading and trying fixes for four days. Nothing works.Surely this has got to the attention of the people who know what they are doing and design these programs. I sure don't know how to fix this, along with a lot of other users. We are not being lazy or arrogant. Nothing seems to work.Surely someone in the hierarchy can put in a patch that fixes this problem.The fact that Ubuntu won't print for so many people surely must be a priority inhe development of this software. So, please will one of the program developers fix this problem and send out a patch.
View 8 Replies
View Related
Jan 7, 2010
I have a client.conf in /etc/cups that points to a CUPS server. I don't have u/p access to this server. I also want to print to a local printer (USB), but I can't set it up - ALL attempts bring me back to the CUPS server password prompt. Is there some line I can add to the client.conf to allow me to use a local printer?
View 4 Replies
View Related
Feb 4, 2010
I wish to update the drivers for a printer which is being shared using samba - can I just upload the new drivers and overwrite the old or do I need to delete the old drivers before uploading the new ones
View 3 Replies
View Related
Oct 19, 2010
I have a Brother DCP585CW and have installed the drivers from Brother and it worked fine on Ubuntu 9.10 on both my desktop and laptop. I have installed 10.04 on both and now the problem. It works fine on the desktop but I get a problem on the laptop. It is a wireless printer and I can print to it but only after I do 2 things each time I reboot the laptop. I have to configure it through cups (http://localhost:631) because it keeps getting set to being connected via USB and letter rather than A4 paper on each boot but the correct setting is:
Code:
Description:DCP585CW Location:Landing Driver:Brother DCP-585CW CUPS v1.1 (color)
Connection:lpd://192.168.1.66/binary_p1 Defaults:job-sheets=none, none media=adobe_A4_8.125x11.5139in
I also have to correct it via System/Administration/Printing and setting A4 and setting it to the default.
View 1 Replies
View Related
Jul 20, 2009
I have a FC11 box, with an HP prineter attached. I trying to print from my laptops after I have setup samba and shared the printer , It was working fine when I was installing FC4 and FC5. I am not sure what is missing. when I tried to print from the XP box I got "Test pge failed to print" error.
View 9 Replies
View Related
