I have a problem with getting my fedora 14 laptop to connect to my fedora 12 server that is hosting my smb HP Deskjet 5650 printer. The error that I get is the following: CUPS server error. There was an error during the CUPS operation: 'client-error-not-possible'.
I have been able to get my daughters Ubuntu laptop and my wife's Windows XP laptop to connect and print without a problem.
I'm unable to change the setting of the actual printer on my system, cant even delete itthe system ask me the root password, after i enter it, i always get this message "There was an error during the CUPS operation:'client-error-not-authorized'."
View 8 Replies View RelatedWhen I installed Fedora GNOME I could use my printer fine (But I had to change the recommended driver) Now, I switched to KDE and I plug-in my printer, It automaticly adds it, Now I have to delete it and re-add to fix the small bug... Except when I press "Remove Printer" I get "There was an error during the CUPS operation: 'client-error-forbidden'."
View 1 Replies View RelatedI've been switching out computers to the Ubuntu distro and so far it's been very successful until this recent snag! As I am trying to have a printer plugged in through USB on one computer and shared on the other! I have the USB on the second computer and it found the printer just fine, no problems and nothing else I had to install! I then went to the first computer and tried to add the printer through the CUPS website using all the proper addresses and queue names and I receive CUPS "client-error-not-possible". I have read other threads on this very same problem but to be honest they just make no sense whatsoever to me! I was thinking of just giving up and using a print server but I know that I will run into the same snag as even then I still need CUPS.
View 9 Replies View RelatedI am trying to setup an HPC4400 printer attached to a Windows XP box on a Fedora-11 box with the latest updates and am getting the error " Cups server error Client-error-not-possible ". Using the Cups GUI on the fedora-11 box I can find the printer, I get verify that the shared printer exists but still get the message when I try to install it.
View 2 Replies View RelatedI hooked up an Hp deskjet portable to ubuntu and keep getting the above error when I finish installing the printer! How do I get by this? 10.04 LTS It's hooked up to LPT-1 port!
View 1 Replies View RelatedI am running Fedora 15 and want to add a network printer (Brother HL 2040) on a Win pc reunning XP pro. Fedora finds the network printer, shows that is shares, but when I try to finish I get the above message. I have emptied the spool file of the test page I tried earlier and nothing but the tmp file remains. Anyone have any suggestions?
View 1 Replies View RelatedSince there are no new ghostscript in repo for suse 10.2, I went to compile it from sources But, when making I got errors ups/gdevcups.c:4743: error: gx_device_cups has no member named header
[Code]...
Googling about this issue doesn't give me any luck version I'm trying to install is 8.64
I noticed that a bit after I had updated Ubuntu 10.04 through the Update Manager, I couldn't print at all! (I run ubuntu 10.04 on my laptop and have a networked HP Officejet 6110xi all-in-one printer connected to a comp running Windows XP home on the same LAN). Everything works when I boot up in windows vista, so the problem is definitely in Ubuntu.
First, I checked the printer jobs and it said that there was an error with a filter or something. Restarting the job didn't do squat, so I decided to try reinstalling my printer, but get the same CUPS error "error-client-not-possible" right after I click "Apply". I then Googled the issue but didn't find much of anything, so I thought I'd try reinstalling CUPS. No luck there either... Same error again and again.
cups does not start with the server. When I try to start from the terminal I get the error message
cupsd: Unable to read configuration file '/etc/cups/cupsd.conf' - exiting!
cupsd: Child exited with status 1!
The log files show nothing. cupsd.conf exists. It is user - root and group - root with permissions set at 0644.
My interpretation of this is that the program is not launching from either boot or terminal for a fundamental reason. I do not quite see what that reason is .
i have followed what in this link to share my printer to my other windows desktop, but when i try to print from there i see this error in the jobs list
from the linux pc i can print without any troubles...
also here is the error log from the cups: cups_error_log.tar.gz
I googled this, to no avail. I've restarted cups, to no avail.This is a Networked Printer, but i have little doubt that can be ruled out as an issue.If i want to print an Image or Plain Text file, i get this error; if i print with OpenOffice, i do NOT get this error and it prints fine.I have also gotten a similar error, like "permission denied" or something, but i cannot recall exactly what it said, and cannot seem to recreate it at the moment.I have been getting this for quite some time now (months), but never found out why. Any ideas?
View 14 Replies View RelatedI upgraded from 13.0 to 13.1 and now I have strange behaviors with the printer. It is an Epson Stylus Photo RX640. It was working well with the vanilla Gutenprint 5.2.2 that came in Slack 13.0. The printer is shared and used from other slackware boxes and a mac. Upgrade to 13.1 (gutenprint gets to be 5.2.4) ...
Now when I print from the machine that has the printer attached I get full black pages, and cups shows errors. The Mac is still able to print well (probably because it is using its own PPD and passing through directly to the printer). I then removed gutenprint, and then removed the 5.2.2 PPDs (that were still in the system). Reinstalled gutenprint from the Slackware 13.1 distro. And the problem persists.
[Code]....
I'm trying to install and configure a printer (networked Brother HL4040CN), but I'm getting an error dialog when I click on "New" in the printer configuration GUI.
Action 1) Click on "New"
Response 1) a) "Authentication (fetching device list)" dialog box, request password for root.
Response 1) b) "Returning HTTP Forbidden for CUPS-Get-Devices (no URI) from localhost" appended to /var/log/cups/error_log
A2) Type root password and press enter in "Authentication" dialog box
R2) a) "CUPS server error" box, "There was an error during the CUPS operation: 'server-error-internal-error'.
R2) b) /var/log/cups/error_log:
Code:
E [17/Jun/2009:08:14:12 -0400] Unable to execute /usr/lib/cups/daemon/cups-deviced: insecure file permissions (0100777)
E [17/Jun/2009:08:14:12 -0400] Returning IPP server-error-internal-error for CUPS-Get-Devices (no URI) from localhost
A3) Click "OK" button in "CUPS server error" box
R3) a) "New Printer" dialog box opens
R3) b) /var/log/cups/error_log:
Code:
E [17/Jun/2009:08:17:10 -0400] Unable to execute /usr/lib/cups/daemon/cups-driverd: insecure file permissions (0100777)
E [17/Jun/2009:08:17:10 -0400] Returning IPP server-error-internal-error for CUPS-Get-PPDs (no URI) from localhost
A4) Enter "lpr://192.168.1.2" and click "Find" button under "Seelct Device->Network Printer->Find Network Printer"
R5) "No printer found at that address."
Any ideas? I have installed the RPMs from Brother's web site for both LPR and CUPS-wrapper
Since last few weeks i am struggling to setup printer connected to print server.
Here is the setup that i have:
I have Red Hat Linux machine from which i want to issue print jobs.
I have Windows Print Server having multiple printers connected to it.
I am able to print jobs from Windows client to any of these printers. But i am not able to print from Red Hat Linux. (i have verified that i can print using smbclient utility, but based on my reading, CUPS API could be used from application to discover, print and issue print jobs.)
I am not able to get the correct configuration for setting up CUPS client.
Apologies if this was asked before -- I have googled the last bytes out of my Firefox but fail to find anything helpful. Here's my problem:I have a foomatic hpijs cups-driver for a HP Inkjet (Non-PS printer) installed. Printing from UNIX-hosts works. I have cups configured not to allow raw-printing (/etc/cups/mime.types: #application/octet-stream, /etc/cups/mime.convs: #application/octet-stream).I have now installed samba-printing, the cups PS-drivers plus the Windows PS-drivers are populated to /etc/samba/drivers/W32X86/ and get pushed to the WIN-Client.Problem is that when I print from a WINXP client, the printer outputs heaps of Postscript-text instead of my page.I have tried to debug this a bit but fail to find anything really useful. My observations so far:
- The samba-pushed HP_Photosmart_3300.ppd (in both /etc/samba/drivers/... and in the resulting dir on the WINXP client) reads:
*cupsFilter: "application/vnd.cups-postscript 0 foomatic-rip"
[code]....
I installed the VSFTPD from YUM and installed the webmin module.i can connect to the server with Telnet but can�t list files.When i try to connect with a FTP client i get the following errors: An error occured openig that folder on the ftp server. Make sure you have access to that folder.
200 Switching to ASCII mode.
227 Entering passive mode (172,20,1,5,69,210)
How to i choose Users and what folders to use??
I've got a problem occurring with my openSUSE 11.3 // GNOME Empathy Chat Client. When I try to connect to my Facebook account, my client tells me that I have a Network Error. Last time I used the client at home, it worked perfectly fine, but when I'm at work it doesn't.
Now, you guys may say that my work's network may have ports blocked, or the firewall is blocking its use in some way, but I find that hard to believe. My reasoning? I am able to connect to my Facebook account thru Empathy at work on my previous Ubuntu 10.04 system with no problems. I have also been connected to the same chat accounts this whole week on my openSUSE 11.3 // KDE 4.4 Kopete chat client.My Empathy connects to my Skype with no problem also. So, do any of you have any ideas that could possibly solve my issue? I love being connected to my Facebook chat at work because I don't see anyone nearly as often, and it's a great way for me to keep in touch with them.
I use the direct ip instead of the hostname and have recreated the printer several times and the issue doesn't go away. Test prints go through fine to the printer but when I actually try to print something this error comes up from CUPS.
View 5 Replies View Relatedi get this error when trying to update/install programs and fedora 10
Code:
Error Type: <class 'yum.Errors.ConfigError'>
Error Value: File contains no section headers.
i also get this when i run yum update:
Code:
bash-3.2$ yum update
Loaded plugins: protectbase, refresh-packagekit
Config Error: File contains no section headers.
file: file://///etc/yum.repos.d/rpmfusion-nonfree.repo, line: 2
'protect=yes
[Code]...
I am getting tcp client connection refused error, when trying to establish tcp client connection from redhat linux to solaris unix. Connect system call is giving connection refused error
View 3 Replies View RelatedI apologize in advance if the following problems I am facing seem 'basic'.I am a newbie to Unix systems and trying to learn and adapt. I am trying to install fred-client-2.2.3 on Ubuntu 8.04 - the Hardy Heron.
So I first downloaded the .tar.gz file from
http://fred.nic.cz/sources/fred-client-2.2.3.tar.gz
Then using the terminal I entered:
tar -xf Fred-Client-2.2.3.tar.gz
cd Fred-Client-2.2.3
sudo ./install.sh
[Cde]..
I installed Fodora 12 on my aspire one EEEpc, I was trying to do a software update but i get an error: Code: An internal system error has occurred a problem that we were not expecting has occurred. Please report this bug in your distribution bugtracker with the error description more details: Error Type: <class 'yum.Errors.RepoError'>
[Code]...
I'm having a problem trying to set up my HP OfficeJet 6310 printer with Fedora 12. This is with a clean install, SELinux disabled and Seems to be some issue specific to Fedora, as I've used the same setup with the same hardware without problems in other distributions. I have installed all the HP files I believe should be installed. Anyway, my printer is on my wireless network. I can see the printer on the network, as is the case with my other computers.
I followed the standard setup I use with any other distro....open a terminal and enter "hp-setup." The HP Setup utility opens and I go through the standard procedure of choosing /Network/Ethernet" as my means of connecting. Moving on, the HP OfficeJet 6310 is found without a problem. When I attempt to "Add Printer," however, I am then getting an error. The error shows, "Printer Queue Setup Failed. Restart CUPS and try again." Looking at [URL], I get to CUPS but can get nothing there so far as a printer goes.
My problem is to get postfix working with a smarthost, to send mails from home with dynamic IP, and which needs authentication. I did exactly the same with Slackware 12.2 (postfix 2.6.2) and it worked. Now I tried to do with 2.6.2 (actual running version is 2.7.0 with the same problem) on Slackware 13 64bit. Following error message occurs around every minute in the maillog:
[code]...
I already search in google doc about installation openvpn. Not all I got complete tutorial. When client connect to server, they got a few error.
Code:
Mon May 09 18:01:57 2011 us=774000 Re-using SSL/TLS context
Mon May 09 18:01:57 2011 us=774000 LZO compression initialized
Mon May 09 18:01:57 2011 us=774000 Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ]
Mon May 09 18:01:57 2011 us=774000 Socket Buffers: R=[8192->8192] S=[8192->8192]
Mon May 09 18:01:57 2011 us=790000 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ]
Mon May 09 18:01:57 2011 us=790000 Local Options String: 'V4,dev-type tun,link-mtu 1542,tun-mtu 1500,proto UDPv4,comp-lzo,cipher BF-CBC,auth SHA1,keysize 128,key-method 2,tls-client' .....
this error happen while installing wine for fedora 15 x86_64 using yum extender, the same problem also happen when installing it using terminal
10:57:02 : ERROR: Dependency resolving completed with errors
10:57:02 : ERROR: Protected multilib versions: 2:libpng-1.2.46-1.fc15.i686 != 2:libpng-1.2.44-3.fc15.x86_64
I have just installed a Canon Pixma iP2200 on Fedora 14. The installation 'seemed' to go OK but whenever I try to print anything I get the following error:
"There was an error during the CUPS operation: 'client-error-document-format-not-supported'."
I have done a bit of searching and the only advice i could find is to uncomment some lines in /etc/cups/mime.convs and /etc/cups/mime.types but I don't have either of those files!
A neighbor of mine just got a Canon Pixma MP450 printer, to replace an old HP printer, and I am trying to get it to work with Fedora 11 installation from a machine they have borrowed from me. The printer gets recognized upon plugging it in but when I try to print a test page from the printer properties I receive the following error:'client-error-document-format-not-supported'
The driver that is selected for the printer is "Generic Driver" I have tried to select a driver but have not found any Canon drivers from the selection dialog box. After searching the web I see mention of a Canon MP150 driver working for the MP450 but I have not found this driver. Is there a driver I have to install from YUM or download from Canon? Are there others successfully using this printer and if so what have they done to get it to work?
I noticed that on my server, I keep getting the same error flooding my logs:
Code:
We don't use CUPS but I'm sure that package is a dependency of something else. It seems like this is Samba trying to share out to the local CUPS server. How can I disable this from flooding my logs? Samba should not be sharing out any printers at all.