Updated to CUPS 1.4.3 from printing repository and was getting this while page test printing:
Code:
/usr/bin/lp: Unsupported format 'application/postscript'!
Downgraded to 1.3.11 and it was solved.
openSUSE 11.2 x86_64, KDE 4.4.3
I've searched all over the internet and have found numerous threads on this topic, none of which have helped me fix the problem. I'll post as much info I can about my setup.I have 3 hard drives... one is for ubuntu (9.10), one is for my data, and one is for Windows7. It looks like this:
1st drive (hda) = ubuntu
2nd drive (hdb) = data
3rd drive (hdc) = windows
[code]....
I've been googling all afternoon to fix this error I get. The situation is as follows: I have multiple harddrives (3x320gb and 1x160gb) all on the SATA interface. One of these drives contains Windows, and the rest I use for programs and downloads. I've installed Ubuntu 9.04 from a USB-stick using the installer's partitioner to make some room for Ubuntu (Ext4 filesystem). I've tried Ubuntu and SUSE in the past.
View 1 Replies View Relatedsuddenly after upgrade
2.6.38-10-generic-pae ===> Error 16: Incosistent filesystem structure
2.6.38-10-generic-pae (recovery mode) ===> Error 13: Invalid or unsupported executable format
2.6.38-10-generic ===> Error 13: Invalid or unsupported executable format
[code]....
b08e48b7-1194-49c1-a743-91e7ee90334e is a link to /dev/dm-2 which is my root partition on nvidia raid
PS: At first it did not boot at all dropping out to grub shell, but I managed to boot it with gparted live usb stick and chroot to Ubuntu and re-install grub, but now 2.6.38-8 kernel works and 2.6.38-10 is not
A few days ago I booted up my computer as normal and loaded vista. It loaded fine, but then froze at the login window. I restarted my computer but this time when I tried to load vista I got the "Error 13" message. Ubuntu still loads up fine however.
I'm fairly certain that I'm using Grub - Legacy, and since most posts that I see post the contents of the menu.lst file, I will too Code: # menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
code....
A few days ago I booted up my computer as normal and loaded vista. It loaded fine, but then froze at the login window. I restarted my computer but this time when I tried to load vista I got the "Error 13" message. Ubuntu still loads up fine however.
I'm fairly certain that I'm using Grub - Legacy, and since most posts that I see post the contents of the menu.lst file, I will too
Code: # menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
[Code]....
Reluctantly I made a temporary install of XP as follows Remove linux drive and install a wiped drive.format ntfs & install windows xp (w/sp3)shift ntfs drive to slave, replace linux drive as master and xp drive as slave. Add it to grub as follows:
Code:
# boot=/dev/sda1
default=1
timeout=5
splashimage=(hd0,0)/grub/splash.xpm.gz
titlem$ Windows XP
code....
I've been playing around with trying to assemble a bare-bones Linux system on a disk.img file through a loop device. I compiled the most recent stable kernel and then copied it onto the root partition in the image. When I try to boot up into the image using qemu, grub gives me this:
Code:
Booting 'tiny'
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinux
Error 13: Invalid or unsupported executable format
Press any key to continue... I am confused because I compiled the kernel with 'make bzImage', and the architecture hasn't changed (qemu on the same machine used to build the kernel). So it should be bzImage format. Is that what this Error 13 means, or could it means something else is wrong...?
I have a weird problem with one of my servers (normal PC hardware). I was connected remotely using Putty, doing some stuff, and all of the sudden some commands, like "ls" stopped working, giving a "file or command not found" type of message. I restarted the ssh session, only to find out I couldn't log on any more (access denied). When I got home and rebooted the system, I was greeted with this:Booting 'CentOS (2.6.18-194.el5xen)'root (hd0,0)Filesystem type is ext2fs, partition type 0x83kernel /boot/xen.gz-2.6. 18-194.el5Error 15: File not foundPress any key to continue...Then I searched about this, found out that the files in /boot/grub/menu.lst did not exist at the specified location (/boot/xen.gz-2.6. 18-194.el5). Somehow I managed to find them in another place, copied them in place, and now I get:Error 13: Invalid or unsupported executable format
View 3 Replies View Relatedi have just discoverd i can't enter my windows 7 via grub boot menu i get error 13 Invalid or unsupported executable format what can i do? # This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sdb1
[Code]...
I was installing opensuse on the c partition and it gave errors so i aborted it now i click on windows and it says invalid or unsupported executable format chainloader +1 so then i proceeded to try and fix this by changing the menu.lst to this:
And now it tells me that disk isnt found so i need to know what to put in the menu.lst to load the actual windows partition and then fix the original error.
Apologies if this was asked before -- I have googled the last bytes out of my Firefox but fail to find anything helpful. Here's my problem:I have a foomatic hpijs cups-driver for a HP Inkjet (Non-PS printer) installed. Printing from UNIX-hosts works. I have cups configured not to allow raw-printing (/etc/cups/mime.types: #application/octet-stream, /etc/cups/mime.convs: #application/octet-stream).I have now installed samba-printing, the cups PS-drivers plus the Windows PS-drivers are populated to /etc/samba/drivers/W32X86/ and get pushed to the WIN-Client.Problem is that when I print from a WINXP client, the printer outputs heaps of Postscript-text instead of my page.I have tried to debug this a bit but fail to find anything really useful. My observations so far:
- The samba-pushed HP_Photosmart_3300.ppd (in both /etc/samba/drivers/... and in the resulting dir on the WINXP client) reads:
*cupsFilter: "application/vnd.cups-postscript 0 foomatic-rip"
[code]....
I run a small home/hobby server. I attempted to upgrade it this morning. It was previously using 8.04 lts. I followed the instructions found here, [URL].. Upgrade for Ubuntu Servers (Recommended) I followed the on-screen instructions. After the installation was complete, I rebooted the server. On start up, I was greeted by this message "error 13: Invalid or unsupported executable format." I have since tried booting into every 10.04 kernel listed. However, the results are the same. I have attempted to find a solution via web search, but have had difficulty finding a solution that is appropriate for my situation.
View 4 Replies View RelatedI use Linux for my everyday work but lately I've been faced with a trouble when I send out file printouts from my browser from my Debian system to (normally) window$ systems, where they are not readable. Is there a way for me to convert the postscript files into pdf format? Most window$ users will have some sort of pdf reader installed but I am still to find one user that has Ghostscript and Ghostview installed. where can I find the TTF fonts that are shipped with every standard installation of Debian? I'm sometimes forced to print files through a windows system and because the fonts loaded in that system are not the ones I use in Debian (URW Gothic L, as an example) I end up having my official documents disfigured. If I can carry around with me a ready-to-install fonts package I can get over this obstacle.
View 3 Replies View RelatedI have 4 partitions in my system, out of which two(sda1, sda2) have windows on them. I have installed RHEL 4 32 - bit on sda3 and after that , installed installed RHEL 64-bit on to a partition sda 5. Now i am unable to boot into RHEL 32-bit. The error i am getting is Error 13: Invalid or unsupported executable format.
View 1 Replies View RelatedI have ripped quite a few movies onto my server and I play them on my PS3 with mediatomb. I haven't changed any of the settings in handbrake except I was playing around with the quality meter on the video tab. Some of my movies will play and others won't. The ones that do not play say something about an unsupported file type. They also will not play in Movie Player.
View 3 Replies View RelatedOn my Laptop is an 80 GB HD. I installed Windows XP first (at this point it worked perfectly) then installed on the same HD, but on other partitions Archlinux.
The whole thing looks like this now:
/dev/sda1 <--- Windows xp
/dev/sda2 <--- arch linux (/, etc, etc^^)
/dev/sda3 <--- homes
/dev/sda4 <--- boot partition (grub)
(I got no SWAP partition, I got 4gb RAM (well can only use 3, since my system doesn't support 64bit), and my friend told me there's no absolute need for a a swap :>)
Arch Linux is booting perfectly (and very fast), but Windows XP doesn't want to boot anymore :>
(Just if it's from any importance: In the partition program I took the "bootable" flag away from my XP Partition and set it to sda4 - I thought I need to do that, but now I'm not so sure anymore :P )
My entry in the file /boot/grub/menu.lst looks like this (I also tried various others)
title Windows
root (hd0,1)
makeactive
chainloader +1
When I boot and choose the Windows XP in the GRUB boot menu, the following message appears:
error 13: invalid or unsupported executable format
When I set root(hd0,1) to root(hd0,0) (what seemed the most logical to me) and boot again selecting the windows xp, then the GRUB cosole appears.
So what did I do wrong - or better said: what should I do now?
cups does not start with the server. When I try to start from the terminal I get the error message
cupsd: Unable to read configuration file '/etc/cups/cupsd.conf' - exiting!
cupsd: Child exited with status 1!
The log files show nothing. cupsd.conf exists. It is user - root and group - root with permissions set at 0644.
My interpretation of this is that the program is not launching from either boot or terminal for a fundamental reason. I do not quite see what that reason is .
I'm using a logitech quickcam pro 3000 on Ubuntu 10.04.
When I run a simple program with OpenCV to display the output from a camera I get the following output:
Code:
A window still opens with the output from the camera, but it seems very low quality and has far less pixels then it should. The camera built into my computer runs the same program with no problems.
My code for the program is simply:
Code:
One further note to make is that I still have the bad quality and low number of pixels with the logitech even when using webcam program. I can seem to find any drivers to update or anything though.
Since there are no new ghostscript in repo for suse 10.2, I went to compile it from sources But, when making I got errors ups/gdevcups.c:4743: error: gx_device_cups has no member named header
[Code]...
Googling about this issue doesn't give me any luck version I'm trying to install is 8.64
I have a printer configured on my Ubuntu server using CUPS amd made it available to the local network. The printer is recognized on my other Ubuntu machine without any problems.
But on my Suse laptop, the printer is not recognized. Using the YaST printer Configuations, I choose the option "Recieve Printer Information from Remote CUPS servers. But no printer is found.But... when I choose Do All Yout Printing Directly via One Remote CUPS server and enter the correct IP address (192.168.1.100), the printer is found andI am sure the printer info is broadcasted because it shows up on my second Ubuntu PC. But why is it not recognized by default on my Suse machine
My Canon S9000 wide format printer just died. I'm looking for a new one. Is there a wide format printer that works well with CUPs in Slackware?
View 8 Replies View Relatedwhen i want run "ltsp-build-client" command i get this error: ERROR: fc14 is unsupported i want know there is any plan for ltsp 5.2 support in fedora 14 and how i can solve this problem for use ltsp in fedora 14.
View 2 Replies View RelatedopenSUSE 11.3 32bit with repos OSS, NON-OSS and Packman + libdvdcss I installed DVDStyler from Packman and as it seems I can't get it to work. When I create a project for PAL, 4:3 with AC3 and finally click "Burn" and select "just generate" to create files for burning I get:
Code:
DVDStyler v1.8.3
Linux 2.6.34.8-0.2-desktop i686
FFmpeg: libavformat 53.4.0, libavcodec 53.7.0, libavutil 51.9.1
Prepare
Cleaning temporary directory
[Code]...
I have an older version of ggv on RHEL for viewing PostScript (.ps) files, but the binary I have refuses to open files from AFS. ggv-2.12.0 is able to open these files from AFS just fine on my Mac. I was not able to find packaged binaries for RHEL 5 or 6 for ggv-2.12.0, so I downloaded the source and compiled it. Unfortunately, it fails to start, printing these error messages:
[code]...
Does anyone know the fix? Or alternatively, is there another good and well-maintained PostScript viewer for Linux?
i installed SLES 11 sp1 as guest on openSUSE 11.3 host, then change the adapter network from 'NAT' to 'Bridged Adapter', but when i hit start i got this error message: Failed to open a session for the virtual machine sles. Failed to open/create the internal network 'HostInterfaceNetworking-wlan0' (VERR_SUPDRV_COMPONENT_NOT_FOUND). Failed to attach the network LUN (VERR_SUPDRV_COMPONENT_NOT_FOUND). One of the kernel modules was not successfully loaded. Make sure that no kernel modules from an older version of VirtualBox exist. Then try to recompile and reload the kernel modules by executing '/etc/init.d/vboxdrv setup' as root (VERR_SUPDRV_COMPONENT_NOT_FOUND). but when run: sudo /etc/init.d/vboxdrv setup
[Code]....
There's a site where you can play classic NES games online without any installation, just need Java: nintendo8.com. But when selecting a game from the site's game list and it tries to load, I get this error:
icedteanp plugin error: Failed to run /etc/alternatives/../../bin/java. For more detail rerun "firefox -g" in a terminal window.
I then ran "firefox -g" from terminal, tried again and got this log:
ERROR: Invalid browser function table. Some functionality may be restricted.
/usr/src/packages/BUILD/icedtea6-1.9.2/plugin/icedteanp/IcedTeaNPPlugin.cc:1506: thread 0x80935c0: Error: Failed to spawn applet viewer: Failed to execute child thread "/etc/alternatives/../../bin/java" (No such file or directory)
I have Java up to date from its repository.
The program I want to use: ProppFrexx Tagger or ProppFrexx Meta Data Editor, can be found here: ProppFrexx ONAIR - The Playout and Broadcast Automation Solution I need this to tag WAV files with RIFF INFO Tags.The Sony PSP can read RIFF Tags! so yeah, that's the reason I need this program. here the complete error message
Code:
exception inside UnhandledException handler: USER32.dll
I don't have Windows anymore, and I never going to use Windows again I hope there is a fix for that
I have a problem with loading the powersaving kernel module p4-clockmod.ko. When I try inserting the module (via modprobe or insmod) I get FATAL: Error inserting p4_clockmod (/lib/modules/2.6.31.8-mediaserver/extra/p4-clockmod.ko): Invalid module format The module has been compiled together with the kernel. Other modules load with no problem at all. I've tried recompiling the kernel (after re-installing the sources, make xconfig from scratch) - no avail. There's only one kernel source package installed. Searching the forum and google didn't yield a helping answer.
View 9 Replies View RelatedI have a web application that runs on PHP and MySQL on opensuse 11.4 (web server) and opensuse 11.1 (database server).The web application uses a .htaccess file that causes my site to error with error "403 forbidden". If I add "+FollowSymLinks" at the top, it loads the application just fine.But problem is that I have an issue with the application, and they believe that my .htaccess file is at fault since it's custom. I hightly doubt it but wanted to eliminate that as a concern.
View 1 Replies View Related