General :: Connect Tata Photon+ EC1261 On Fedora 13?

Dec 6, 2010

I am using Fedora 13 and I am facing some problems while connecting. Can anyone give me complete description how to connect Tata Photon+ on Fedora 13?

View 1 Replies


ADVERTISEMENT

Fedora Networking :: How To Run Tata Photon+ EC1261 In 13

Nov 15, 2010

I am using Fedora 13 and trying to run internet through my Tata photon+ HUAWEI Mobile Broadband Model: EC1261 but I am unable to configure the system to run internet through tata photon+. configure and run internet on my system through tata photon+?

View 1 Replies View Related

General :: Tata Photon Plus - HUAWEI EC1261 - On Open Suse11.3

May 26, 2011

Can tata photon plus(HUAWEI EC1261) be used on opensuse 11.3..? i am trying to install but not able to do..details about installing and configuring..?

View 3 Replies View Related

Ubuntu Servers :: Configure TATA Photon+ EC1261 HUAWEI?

Oct 11, 2010

I'm running ubuntu 10.04. I have a newly purchased TATA Photon+ Internet connection which supports Windows and Mac. On the Internet I found a article saying that it could be configured on Linux. I followed the steps to install it on Ubuntu from this link text. I am still not able to get online

Also, it is very slow, but I was told that I would see speeds up to 3.1MB.

I dont have wvdial installed and cannot install it from apt as I'm not connected to internet

View 2 Replies View Related

OpenSUSE Network :: How To Connect TATA Photon Plus

Dec 29, 2010

connecting TATA Photon Plus in OpenSUSE. I have been struggling with it but not getting any solution.

View 9 Replies View Related

Ubuntu Installation :: Connect Tata Photon?

Nov 4, 2010

the steps to connect tata photon in ubuntu.

View 1 Replies View Related

Red Hat :: Connect Tata Photon+ - Mobile Broadband Service In El5?

Apr 15, 2010

I want to know how to connect tata photon+ mobile broadband service in redhat el5,like drivers needed,procedures to install,where can i download the driver.

View 3 Replies View Related

Software :: Tata Photon In Suse - System Recognises The USB Device But Unable To Connect To Internet

Feb 1, 2011

Iam using suse linux desktop 10.0. when i connect tata photon USB modem for internet, the system recognises the USB device but unable to connect to internet. How to use tata photon in suse linux

View 3 Replies View Related

General :: How To Install Tata Photon

Aug 20, 2010

how to install tata photon onlinux

View 1 Replies View Related

General :: Install Drivers For Tata Photon Plus -

Jul 9, 2010

I am new to Linux. Have to install packages and softwares on Linux ? what are commands ?

View 6 Replies View Related

Networking :: Cannot Access The Internet Through Tata Photon Plus On Fedora 15

Jul 30, 2011

I followed the instructions mentioned in this thread carefully [url] Despite this, I am unable to connect to the internet. It just says connecting and connecting, but it doesn't connect at all.

View 2 Replies View Related

General :: Ubuntu 8.10 Tata Photon USB Mode Driver Like 10.04

Jul 24, 2010

I have been using Ubuntu since 7.04. It is really an amazing experience. I have some 8.10 machines which I use for my students and i don't want to change it right now to different version. On the other hands I want to install USB Modem (Tata Photon+) on Ubuntu 8.10. I have seen its working fine on Ubuntu 9.04 and even better with Ubuntu 10.04.

How to install drivers in Ubuntu 8.10 for proper support with Tata Photon. right now my usb modem is detected as usb storage. I have also tried the usb-switchmode stuff following some articles available on net. But with no real success.

I want to know the exact difference in 8.10, 9.04 and 10.04 as far as usb modem driver installation is concerned.

Or can I configure Ubuntu 8.10 in such a way that I can use USB Modem (Tata Photon) like we do in Ubuntu 10.04.

View 4 Replies View Related

General :: Tata Photon Card Is Not Working In Rhel4 And Rhel5?

May 11, 2010

Tata photon card is not working in rhel4 and rhel5.

View 4 Replies View Related

Fedora Networking :: Tata Indicom Photon+ For Mobile Broadband Internet Connection - Usb_modeswitch Cannot Detect Anything

Mar 26, 2010

I am using tata indicom photon+ for mobile broadband internet connection.

Code:

Befor yesterday, I was able to connect via this, but today(i guess a update yesterday is the culprit) i cannot. while it should connect automatically, even usb_modeswitch cannot detect anything.

Quote:

my /etc/modeprobe.conf is also blank. But I can work with wireless

View 5 Replies View Related

Ubuntu Networking :: How To Use Tata Photon In 10.10

Oct 19, 2010

I recently installed ubuntu 10.10 in my studio. i configued vpn connection but i am not able to connect myself to internet.

View 1 Replies View Related

Hardware :: Configure TATA Photon Plus ?

Nov 14, 2009

I have installed mandriva spring 2009 in my laptop HP Compaq CQ60..I am using net connection from Tata Photon plus using the modem ZTE AC8710. how to configure net connection..

View 4 Replies View Related

OpenSUSE Network :: Configure TATA Photon USB Internet In 11.4?

Mar 26, 2011

I am using TATA Photon usb internet stick. It's a Huawei USB modem. OpenSuSe detects and shows it as mobile broadband. But can not connect to internet. Any1 has configured similar device before? It shows me in "network manager" but no option to active/connect it. In Windows I got auto dialer for Photon. And customer care says no support for Linux.

View 2 Replies View Related

Red Hat :: Tata Photon+ Huawei Usb Modem - EC1260 - Not Working With 5

Mar 6, 2010

Configuring(if possible) usb modem in redhat linux. Redhat not able to detect usb modem.

View 2 Replies View Related

Hardware :: Connecting Huawei EC152 Modem - Tata Photon+

Apr 28, 2011

Any one tried to connecting the internet using Tataphoton+?

Device details:
HUAWEI Mobile Broadband
Model: HUAWEI EC 152

According to manual, the device should be detected as /dev/ttyACM0. But no device of this name is created. 'lsusb' identifies the device.

The required packages like wvdial, wvstream are installed. I have tried all the possible ways. Also created /dev/ttyACM0 with # mknod /dev/ttyACM0 c 166 0

Link to manual, in case any one wants to read it [url]

Just want to connect using GNU/linux any how. Can't live with WINDOWS

View 12 Replies View Related

General :: Connect Tata And Reliance Boradband Modem

Mar 23, 2010

Here is a method for connect usb modem in linux system.

I've created step by step process to configure the TATA/Reliance modem over linux..Pls go thru the link

I used this method to configure TATA photon+ but I hope similar way will also work for Reliance NetConnect Brodband+

Huwaie/ZTE Modem
Command Mode:

1) Check your NetworkManager rpm for Correct Installation

2) Set SELinux in permissive mode and switch to ROOT user or you can also use sudo..

3) If wvdial is not installed already, you've to install it from Fedora Repository. yum install wvdial

4) Run below command, it will detect your modem....wvdialconf /etc/wvdial.conf

If this command can't detect your modem then try below commands

i) lsusb -v grep -i iManufacturer The above command will help you to know the manufacturer of you modem and to get its vendorId and productionid.

ii) lsusb -v From above command search the vendor id and product id your of modem and execute the below command

iii) modprobe usbserial vendor=XXXXXX product=XXXXXX This command will load your modem

Now run the command given in step 4.

5) Now open /etc/wvdial.conf file in your favourite editor. I used vim for this purpose.

vim /etc/wvdial.conf

Change your username and password with internet/internet. Save and exit.

6) Now try below command..

wvdial

7) Open /etc/resolv.conf or execute below command

You can also add some global DNS echo "nameserver 4.2.2.2" >> /etc/resolv.conf

8) try to ping any site

If you get the response then you are all set for the modem, ENJOY SURFING with high Speed

GUI Mode:

Right Click on the Netowk icon on your status bar

NetowkManager > Mobile Brodband > Add

Simply follow the instructions given in GUI and setup your modem

Then Left Click on NetworkManager ICON on status bar and choose your connection and connect,

If you face any problem then set SELinux ini permissive mode and then try.

I tested the GUI method for huawei modem but, for ZTE modem, it doesn't work, Please let me know if it works for you..

View 1 Replies View Related

Networking :: Cant Connect To Internet Via Tata Indicom Datacard

Oct 7, 2010

I am using redhat linux os rhel 5.3. i am not able to connect to internet via my new tata indicom datacard in this operating system...how can i configure it to work...i am using vmware to run this operating system...

View 2 Replies View Related

Networking :: Connect To Internet Using A USB Modem Tata Docomo 056cx9000 Device On Ubuntu

Jul 23, 2011

I have a USB Tata Docomo (USB Modem to connect internet) lsusb shows

Code:

Did a lot of Googling etc on forums and seems a few people have been able to use it.
1) [url]
2) [url]

Though I followed steps as per above links but I my connection via network manager does not establishes. Which as per above links should have come if things went correctly. In Windows same modem works correctly.

I also installed usb-modswitch but not sure as how to use it. I installed it via Synaptic (I use Ubuntu)

Quote:

Shows

Quote:

Quote:

My kernel is

Quote:

Quote:

Like this it keeps on repeating above steps. My service provider does not give a user name and password.

Here is my wvdial.conf file

Quote:

Next set of commands

Quote:

Quote:

Quote:

Quote:

Quote:

I also tried as per this post [url]

Quote:

How do I connect to internet?

Is the driver for my device missing on my system?

View 3 Replies View Related

Ubuntu Networking :: Huawei EC1261 Does Not Work

May 23, 2010

I recently bought a Huawei EC1261 mobile broadband dongle from Tata Teleservices. Unfortunately,neither does the dongle does not work in Ubuntu 9.04(Jaunty Jackalope) nor in Windows XP. The dongle is rather mounted as a drive and not recognised by NetworkManager as a mobile broadband device. The drive can be accessed with Nautilus as well as terminal like any other USB pen drive and located at "/media/disk". Also, does the device work in Ubuntu 10.04(Lucid Lynx)? report if anyone has tried using the device on Lucid, as I will upgrade to Lucid if the device is supported.

View 9 Replies View Related

General :: Configure Tata Photan Card In My Operating System

Mar 20, 2010

How to configure tata photan card in my linux operating system. I am using centos.

View 3 Replies View Related

Ubuntu :: Corrupted X Gets Allright When Photon Plus Pendrive Inserted

Sep 2, 2009

I am running Ubuntu 9.04 on my Acer Aspire 5100 laptop. Normally, when I put it to suspend to disk mode, it fails to wake up cleanly. I mean, it wakes up but the X is corrupted with lot of flickering. Ctrl + alt + backspace doesn't set it right. But when I insert my Photon Plus Broadband pendrive into the USB, the flickering immediately disappears and I am presented with the clean, shiny desktop. The problem is that the flickering doesn't stop until I insert the pendrive.

View 2 Replies View Related

Ubuntu :: Modem - Configure Photon+ Wireless Device In My Desktop

Mar 5, 2011

I have Ubuntu 9.04 in my desktop, I am trying to configure Photon+ wireless device in my desktop, since it is having .exe file i am finding difficulty to configure it( I know .exe will not work) , but i want to know is there any possibility to configure this modem in Ubuntu machine....

View 1 Replies View Related

Ubuntu Networking :: Connecting Tata Docomo USB Modem In 10.04?

Jul 22, 2011

I have a USB Modem MMX 372 G to connect internet lsusb showsCode: Bus 002 Device 002: ID 05c6:9000 Qualcomm, Inc.and following is /var/log/messages when I connect the USB modem and connect it for the first time the USB modem Quote:

Jul 24 08:37:42 bond kernel: [ 110.200159] usb 2-2: new high speed USB device using ehci_hcd and address 2
Jul 24 08:37:43 bond kernel: [ 110.353219] usb 2-2: configuration #1 chosen from 1 choice

[code]....

View 1 Replies View Related

Ubuntu Networking :: Tata Docomo GPRS Settings With Phone Modem?

Nov 20, 2010

I need to setup my Sony Ericson C510 phone modem in Ubuntu linux the latest one that I have installed. When I connect my Phone using USB connection it doesnt show me the Dialog box where it says create new "Mobile Broadband Connection". I am not sure how can I configure my Tata Docomo GPRS Connection to use it with Ubuntu.

Here's one blog i came across which says:- Its wonderful to see people browsing in their mobile phones at work places and while they travel. Many Telecom companies provide cheap GPRS / EDGE based internet connectivity which can also be connected to a computer. Here, I will explain how to connect TATA Docomo Internet service in your Ubuntu machine.

[Code]...

View 3 Replies View Related

Ubuntu Networking :: Tata Photo Card No Longer Detected After Firmware Upgrade

May 14, 2010

I am using Ubuntu 10.04. The Tata Photon+ card Huwai EC1260 was working flawlessly. However, I recently did a firmware upgrade on the card that was provided by Tata Indicom for it to work on Windows 7.

After that, the card is no longer detected as a mobile modem in Ubuntu. If I try to add a new connection, all options are disabled (whereas earlier Tata Photon card would appear automatically).

The product ID has changed. What change can I make to Ubuntu to enable it to detect the card again.

View 6 Replies View Related

General :: Fedora 14 With Modem Not Connect

Dec 29, 2010

I've tried setting usb_modeswitch wvdial etc .. modem has been detected as a modem fff1 but still could not connect to the internet ... I try to use the network connection settings still can not ..so what should I do?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved