I had claws mail 3.7.6 installed with mint 10 and all was well. I use gmail with ssl and was no problem. I wanted to download some add-ons for claws, but most were only compatible with version 3.7.8, so I downloaded and installed 3.7.8 only to find that it doesn't support ssl connection, so I can't use it for my gmail account.
View 2 Replies
I am suddenly experiencing problems with disappearing e-mails in Claws Mail. They seem to disappear somehow during the download process. Running Claws Mail from the terminal gives me the following errors, but I am not sure that this is related to the problems with my other accounts:
Code:
** (claws-mail:12020): WARNING **: [11:45:58] IMAP error on imap.gmail.com: STATUS error
** (claws-mail:12020): WARNING **: [11:45:59] IMAP error on imap.gmail.com: STATUS error
** (claws-mail:12020): WARNING **: [11:46:00] IMAP error on imap.gmail.com: STATUS error
I am using Claws Mail version 3.7.4 with Linux Mint 9 (LXDE). I have googled a lot, but I haven't been able to come up with a satisfactory answer. It may have something to do with some upgraded gnu utilities, but I am not sure what this is in reference to. BTW, all of my accounts use IMAP.
I can't encrypt my e-mails in Claws Mail (3.7.8, slackbuilds.org) on my Slackware 13.1 system. I have the PGP/Core and PGP/MIME plugins loaded. I can verify the signatures of incoming messages and sign outgoing messages, but not encrypt them. Even though there is only one key associated to the recipient's email, Claws can't find it and the "Select Key" dialog displays an empty list of keys.
View 3 Replies View RelatedI just started using suse, so a few questions claws-mail 3.7.5, I have no print capabilities, there is no print icon showing, also the spam filter is greyed out. I have loaded bogofilter, but I noticed the amount of rpms listed is much less than my last distro, including the advanced filtering. Are these rpms on another repo somewhere.
View 9 Replies View RelatedUntil the latest update to php, claws-mail was running fine. Since updating php through slackpkg, Claws will start but as soon as a message is selected it crashes with the following message (caught in terminal)
root[/]# claws-mail
Newmail plugin loaded
Message header summaries written to /home/pat/Mail/NewLog
Segmentation fault
root[/]#
As usual, I'm lost and wandering in the darkness.
I just upgraded from fc11 to fc12 with a great deal of trouble...finally am partially functional. The problem really bugging me is the missing claws-mail toolbar that shows "tools", addressbook, encrypt/decrypt, and especially the ability to load plugins, and set all preferences. I have tried uninstalling & reinstalling but nothing provides the toolbar I need. Yum does not provide anything new either. As most of my important passwords are encrypted, and I need the claws pgp plugin to be loaded.
View 2 Replies View RelatedI am using Claws Mail version 3.7.3 on Ubuntu 9.10. In the last few days, replies that I receive often have the original (quoted) text replaced with an ellipsis [ ... ]. For example, I see: Where the ellipsis is a hyperlink (?), that when double-clicked displays the remainder of the message, as Claws had normally been doing: If I forward the message, everything is included / shown, as expected. It's very annoying to have this program suddenly start behaving this way: When I receive / read a reply, I want to see the entire message ('thread') displayed, not this [... ] ellipsis (hidden original message(s)).
View 1 Replies View RelatedTrying to transfer to claws mail from kmail, I have problem in sending emails: It doesn't send email through one of my accounts (a university account) and says: An "error happened during SMTP session". My other university account works!
View 3 Replies View RelatedI'm trying to install the plug-in Gtkhtml2Viewer on my Debian Lenny system for claws-mail. I have installed claws-mail 3.7.5 from backports. When I try to install the plug-in, I get the following response:
Code:
mark@debian:~/stuff/debs/source/gtkhtml2_viewer-0.27$ ./configure
[..]
checking for GNU gettext in libc... yes
checking whether to use NLS... yes
checking where the gettext function comes from... libc
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for CLAWS_MAIL... configure: error: Package requirements (claws-mail >= 3.4.0.1) were not met:
No package 'claws-mail' found.
Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables CLAWS_MAIL_CFLAGS
and CLAWS_MAIL_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details.
mark@debian:~/stuff/debs/source/gtkhtml2_viewer-0.27$
Since I have version 3.7.5, I would think that the above cited requirement of "claws-mail >= 3.4.0.1" would be met. However, for some reason, it states that "No package 'claws-mail' found", which is strange.
I have been trying to install the plug-in vcalendar for claws-mail. I use Debian Lenny, and I have installed claws-mail 3.7.5 from backports. I tried installing the plug-in, but get the following response:
Code:
mark@debian:~/stuff/debs/source/vcalendar-2.0.8$ ./configure
[..]
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for CLAWS_MAIL... configure: error: Package requirements (claws-mail >=
3.6.1.27) were not met:
No package 'claws-mail' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables CLAWS_MAIL_CFLAGS
and CLAWS_MAIL_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
mark@debian:~/stuff/debs/source/vcalendar-2.0.8$
I'm not sure why it didn't find ANY package of claws-mail. Further, 3.7.5 should be good enough, since it is newer than the required 3.6.1.27.
I've got a problem with the Claws-mail client. Couple of days ago I have updated the client to its newest version 3.7.8. Because I couldn't find a ready-made package for Slackware 13.0 I've downloaded the source, unpacked to a folder and using src2slack created a package. Package has been created using default settings. And when done upgraded as it should be with upgradepkg. And it was very nice until I've noticed that Claws didn't load into the tray.
Went into plugin loading screen and saw that the trayicon plugin isn't loaded. This one is easy I thought and loaded the plugin. And then it happened. The plugin didn't load but instead it spit out this message: "The following error occurred while loading Trayicon.so : /usr/lib/claws-mail/plugins/trayicon.so: undefined symbol: gtk_status_icon_set_title". I've found what this symbol should do (or so I think) but it doesn't get me anywhere. I would really like to drop claws into the tray.
I've tried this several times and cannot get claws-mail to run. Libetpan has been installed, removed and re-installed. When trying to start c-mail it say cannot find libetpan.so.13 which is accurate - the current installation of libetpan puts in libetpan.so.15. These packages all come from slackbuilds (have also tried Alien's package wtih the same results). This a standard 13.1 install with regular updates through slackpkg.
View 10 Replies View RelatedI haven't logged on to Fedora for a few days, but I did this morning and opened claws mail and clicked 'get mail' and it proceeded to download new messages. However, when I clicked on the inbox folder, the email count changed to zero! No email. I checked and found the folderlist.xml has the correct Mail folder location, and when I went to that location, (on a shared data partition) indeed the 'inbox' folder was EMPTY. No files at all. I'd had a similar issue once, but the email #MH location wasn't correct, so when I fixed it, the email appeared. I did a web search and a search of the claws bugzilla.
The closest I came was a message about the cache not keeping accurate information. There was a claws-mail update at the end of May, but it had been working fine since then up until now. And, it's possible it's some sort of Fedora issue (?), because I had opened my 'home' folder on my desktop to check the claws folder, and now I see that there's a gaping hole on my desktop where that folder should be. I can get there by clicking 'places' and 'Home Folder'. Any other reports of disappearing folders and email?
I recently decided to switch back to a stand alone email client from gmail. I started with thunderbird, which had a very intuitive user interface and was working fairly well, except for the fact that when it wasn't supposed to be doing anything, it was taking up about 40% of my CPU (this is after it had downloaded all the emails, so there really wasn't anything that needed that much cpu usage from my perspective). After investigating that a bit, I decided I'm going to go for something lighter, and now I'm trying to claws-mail. This one is fast and quick, with very little bells and whistle, and I think it has the potential of keeping me happy.
However, there are few things that I can't figure out how to do. The two main ones right now are: How do I make it download all the emails in at least the inbox folder? I'm using imap protocol with gmail, and I'm happy that the two mailboxes are very well synced, however the only thing it is downloaded by default is the email header, and not the content. I would like to be able to download the content immediately, so I can read the email offline as well. How can I set up GPG to sign my emails automatically? In claws-mail to sign my emails, I need to go to the Options->Privacy Options->PGP Mime, followed by Options->Sign. Is it possible to make this the default option?
I have the newest ubuntu version (64Bit) with claws mail 3.7.4. When I click:
Configuration->Plugins->Load
And select the python plugin, claws crashes as soon as I clock ok.
I want to change the polling order of my two email accounts, but I can't figure it out. I have two IMAP accounts in Claws-Mail, one for work and one for 'other'. The work account is set as default. It is uppermost in the left pane. It is marked 'MH', which I think is to do with storage of the downloaded emails. Claws-Mail always polls my 'other' account first. This takes ages and prevents me getting my work email. How can I make sure the work account is polled first?
View 2 Replies View Relatedi'm currently using the claws mail rssyl plugin to manage my rss feeds, but i have two issues with it:
1) when i delete an rss item it reappears when i refresh the feed
2) when i mark all posts of a feed as read, a little while later (for example) 5 of the 20 items become new/unread again. these unread items are random (not the latest posts)
the only pattern i can see (regarding issue #2) is that it only affects feeds hosted on videos. i'm thinking of finding a different application to manage my rss feeds, but it is nice to have email and feeds in once place.
This message was created automatically by mail delivery software. A message that you sent could not be delivered to one or more of its recipients. This is a permanent error. The following address(es) failed: xx@xx.com SMTP error from remote mail server after initial connection: host [URL] [ip address]: 50 Access denied...
View 4 Replies View RelatedI recently bought an HP Mini Netbook which has a great feature called HP Quickmail.I was told this is a Linux front end which lets you get straight on to E-mails or the WEb without waiting for Windows 7 to boot. Every time I get a message "Sorry we are unable to check your Yahoo! Mail account now. Click here to check your Internet Settings" My settings are just fine and work perfectly with my main laptop.
View 1 Replies View RelatedMy Phone keeps reporting
Cannot Get Mail
The connection to the server failed
My phone does seem to show (all?) the contents of my home directory so must have received some data but no actual mail.
In debug.txt, this keeps repeating over and over:
Found 0 message changes
Initializing message diff engine
1 messages in state
And in /var/log/maillog, this does:
Killed (lost mailbox lock)
There are no other imap connections running.
When sending a message some recipients get it while others don't and i receive this mail every time an e-mail has failed to be received by others:
Code:
Subject: failure notice
This is the qmail-send program at XXX-XX-XXX-XX.local. I'm afraid I wasn't able to deliver your message to the following addresses.
This is a permanent error; I've given up. Sorry it didn't work out.
<XXXXX@XXXXXXX.com>:
Sorry, I wasn't able to establish an SMTP connection. (#4.4.1)
I'm not going to try again; this message has been in the queue too long.
Below this line is a copy of the message.
Information about my server: Plesk 9.3.0 | PHP Version 5.1.6 | CentOS release 5.4 | Linux 2.6.28.7 | GenuineIntel, Intel(R) Atom(TM) CPU 330
[url]
I use horde webmail installed through Plesk, and i access it through webmail.domain and not mail.domain
This message was created automatically by mail delivery software. A message that you sent could not be delivered to one or more of its recipients. This is a permanent error. The following address(es) failed:
xx@xx.com
SMTP error from remote mail server after initial connection: host [URL] [ip address]: 550 Access denied...
I am working on setting up a bind 9 nameserver that will be responsible for serving up DNS records for my internal network and publicly for my web server. My configuration is below:
Firewall Gateway (Ubuntu Server 9.10) ---> switch ---> internal servers (ubuntu server 9.10 and mac os x server)
The internal servers are all on the same subnet, so DNS, web and mail will all be on the same subnet of private IPs. Each internal server is mapped with SNAT to a public IP address. And the DNS server only has port 53 forwarded to it.I am trying to figure out the best way to set up my nameserver so that it can provide records for my internal servers based on private IP addresses, and then provide records to the public for my internal servers based on their public IP addresses. I had a few questions on this:
1) Is this the correct way to think about my setup, or is this typically done in another way?
2) Does anyone have recommendations on the specific configuration I should follow?
3) Are there specific references I should look into as well?
I am looking to use Citadel in my machine, some questions come to mind before I install it again on my new server.
Can this tool support phpBB sending mail for activations etc?
Can I use CLI mail commands?
I have noted it can support a vast number of domains.
I have a HP laptop which can support 1600x900. But after I install ubuntu 9.10 on it, it can only support up to 1280x700. My laptop has a Nvidia graphics card. And i am using GNOME as my desktop environment.
View 1 Replies View RelatedWe have 2 HTTP Load balancer with HAproxy and heartbeat. There are 4 nodes in this cluster. It's doing round robin load balancing. The HTTP cluster working fine. We are having problem with our portal because it uses SSO. We need sticky connection support in our HAproxy. Also we need load balancing for HTTPS traffic. Here's our HAproxy conf file.
[Code]....
I have got a nagios server running on my network, The configuration seems to be okay but each time there is a service alert notification, and an e-mail is sent to the contact group, Nagios continuously sends e-mail over and over again. Do anyone know of a way to set Nagios directives to only send one e-mail per alert without it flooding mail boxes.
View 3 Replies View RelatedI had configured sendmail on linux 5.2, Iam using public ip and my domain is registered[linuxforfreshers.info]. I am facing a issue that when I mail with the user sumit@linuxforfreshers.info then I am able to do it. But if somebody tries to send mail to the same user then it bounce backs. I had made the entry of domain in /etc/mail/local-host-name and also I put ok in /etc/mail/access.The mails are working properly with in LAN. But not able to work on WAN only I can send mail but not able to recieve mail.What else I need to do.
View 6 Replies View RelatedI am trying to configure mutt to send email via command line . It works fine when I configure it for gmail as follows:Quote:
# SENDING MAIL
set copy=yes
set smtp_url = "smtp://mymail@smtp.gmail.com:587/"
[code]...
How to configure a Debian mail server as a user send a mail with attachment maximum wight is 5 Mb.
View 3 Replies View Related
