I am suddenly experiencing problems with disappearing e-mails in Claws Mail. They seem to disappear somehow during the download process. Running Claws Mail from the terminal gives me the following errors, but I am not sure that this is related to the problems with my other accounts:
Code:
** (claws-mail:12020): WARNING **: [11:45:58] IMAP error on imap.gmail.com: STATUS error
** (claws-mail:12020): WARNING **: [11:45:59] IMAP error on imap.gmail.com: STATUS error
** (claws-mail:12020): WARNING **: [11:46:00] IMAP error on imap.gmail.com: STATUS error
I am using Claws Mail version 3.7.4 with Linux Mint 9 (LXDE). I have googled a lot, but I haven't been able to come up with a satisfactory answer. It may have something to do with some upgraded gnu utilities, but I am not sure what this is in reference to. BTW, all of my accounts use IMAP.
I can't encrypt my e-mails in Claws Mail (3.7.8, slackbuilds.org) on my Slackware 13.1 system. I have the PGP/Core and PGP/MIME plugins loaded. I can verify the signatures of incoming messages and sign outgoing messages, but not encrypt them. Even though there is only one key associated to the recipient's email, Claws can't find it and the "Select Key" dialog displays an empty list of keys.
I am using Claws Mail version 3.7.3 on Ubuntu 9.10. In the last few days, replies that I receive often have the original (quoted) text replaced with an ellipsis [ ... ]. For example, I see: Where the ellipsis is a hyperlink (?), that when double-clicked displays the remainder of the message, as Claws had normally been doing: If I forward the message, everything is included / shown, as expected. It's very annoying to have this program suddenly start behaving this way: When I receive / read a reply, I want to see the entire message ('thread') displayed, not this [... ] ellipsis (hidden original message(s)).
Trying to transfer to claws mail from kmail, I have problem in sending emails: It doesn't send email through one of my accounts (a university account) and says: An "error happened during SMTP session". My other university account works!
I just started using suse, so a few questions claws-mail 3.7.5, I have no print capabilities, there is no print icon showing, also the spam filter is greyed out. I have loaded bogofilter, but I noticed the amount of rpms listed is much less than my last distro, including the advanced filtering. Are these rpms on another repo somewhere.
I had claws mail 3.7.6 installed with mint 10 and all was well. I use gmail with ssl and was no problem. I wanted to download some add-ons for claws, but most were only compatible with version 3.7.8, so I downloaded and installed 3.7.8 only to find that it doesn't support ssl connection, so I can't use it for my gmail account.
Until the latest update to php, claws-mail was running fine. Since updating php through slackpkg, Claws will start but as soon as a message is selected it crashes with the following message (caught in terminal)
root[/]# claws-mail Newmail plugin loaded Message header summaries written to /home/pat/Mail/NewLog Segmentation fault root[/]#
I recently decided to switch back to a stand alone email client from gmail. I started with thunderbird, which had a very intuitive user interface and was working fairly well, except for the fact that when it wasn't supposed to be doing anything, it was taking up about 40% of my CPU (this is after it had downloaded all the emails, so there really wasn't anything that needed that much cpu usage from my perspective). After investigating that a bit, I decided I'm going to go for something lighter, and now I'm trying to claws-mail. This one is fast and quick, with very little bells and whistle, and I think it has the potential of keeping me happy.
However, there are few things that I can't figure out how to do. The two main ones right now are: How do I make it download all the emails in at least the inbox folder? I'm using imap protocol with gmail, and I'm happy that the two mailboxes are very well synced, however the only thing it is downloaded by default is the email header, and not the content. I would like to be able to download the content immediately, so I can read the email offline as well. How can I set up GPG to sign my emails automatically? In claws-mail to sign my emails, I need to go to the Options->Privacy Options->PGP Mime, followed by Options->Sign. Is it possible to make this the default option?
I have the newest ubuntu version (64Bit) with claws mail 3.7.4. When I click: Configuration->Plugins->Load And select the python plugin, claws crashes as soon as I clock ok.
I want to change the polling order of my two email accounts, but I can't figure it out. I have two IMAP accounts in Claws-Mail, one for work and one for 'other'. The work account is set as default. It is uppermost in the left pane. It is marked 'MH', which I think is to do with storage of the downloaded emails. Claws-Mail always polls my 'other' account first. This takes ages and prevents me getting my work email. How can I make sure the work account is polled first?
I just upgraded from fc11 to fc12 with a great deal of trouble...finally am partially functional. The problem really bugging me is the missing claws-mail toolbar that shows "tools", addressbook, encrypt/decrypt, and especially the ability to load plugins, and set all preferences. I have tried uninstalling & reinstalling but nothing provides the toolbar I need. Yum does not provide anything new either. As most of my important passwords are encrypted, and I need the claws pgp plugin to be loaded.
I'm trying to install the plug-in Gtkhtml2Viewer on my Debian Lenny system for claws-mail. I have installed claws-mail 3.7.5 from backports. When I try to install the plug-in, I get the following response:
Code: mark@debian:~/stuff/debs/source/gtkhtml2_viewer-0.27$ ./configure [..] checking for GNU gettext in libc... yes checking whether to use NLS... yes checking where the gettext function comes from... libc checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for CLAWS_MAIL... configure: error: Package requirements (claws-mail >= 3.4.0.1) were not met:
No package 'claws-mail' found. Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables CLAWS_MAIL_CFLAGS and CLAWS_MAIL_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details.
mark@debian:~/stuff/debs/source/gtkhtml2_viewer-0.27$ Since I have version 3.7.5, I would think that the above cited requirement of "claws-mail >= 3.4.0.1" would be met. However, for some reason, it states that "No package 'claws-mail' found", which is strange.
I have been trying to install the plug-in vcalendar for claws-mail. I use Debian Lenny, and I have installed claws-mail 3.7.5 from backports. I tried installing the plug-in, but get the following response:
Code: mark@debian:~/stuff/debs/source/vcalendar-2.0.8$ ./configure [..] checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for CLAWS_MAIL... configure: error: Package requirements (claws-mail >= 3.6.1.27) were not met:
No package 'claws-mail' found Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables CLAWS_MAIL_CFLAGS and CLAWS_MAIL_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details. mark@debian:~/stuff/debs/source/vcalendar-2.0.8$ I'm not sure why it didn't find ANY package of claws-mail. Further, 3.7.5 should be good enough, since it is newer than the required 3.6.1.27.
I've got a problem with the Claws-mail client. Couple of days ago I have updated the client to its newest version 3.7.8. Because I couldn't find a ready-made package for Slackware 13.0 I've downloaded the source, unpacked to a folder and using src2slack created a package. Package has been created using default settings. And when done upgraded as it should be with upgradepkg. And it was very nice until I've noticed that Claws didn't load into the tray.
Went into plugin loading screen and saw that the trayicon plugin isn't loaded. This one is easy I thought and loaded the plugin. And then it happened. The plugin didn't load but instead it spit out this message: "The following error occurred while loading Trayicon.so : /usr/lib/claws-mail/plugins/trayicon.so: undefined symbol: gtk_status_icon_set_title". I've found what this symbol should do (or so I think) but it doesn't get me anywhere. I would really like to drop claws into the tray.
I've tried this several times and cannot get claws-mail to run. Libetpan has been installed, removed and re-installed. When trying to start c-mail it say cannot find libetpan.so.13 which is accurate - the current installation of libetpan puts in libetpan.so.15. These packages all come from slackbuilds (have also tried Alien's package wtih the same results). This a standard 13.1 install with regular updates through slackpkg.
I haven't logged on to Fedora for a few days, but I did this morning and opened claws mail and clicked 'get mail' and it proceeded to download new messages. However, when I clicked on the inbox folder, the email count changed to zero! No email. I checked and found the folderlist.xml has the correct Mail folder location, and when I went to that location, (on a shared data partition) indeed the 'inbox' folder was EMPTY. No files at all. I'd had a similar issue once, but the email #MH location wasn't correct, so when I fixed it, the email appeared. I did a web search and a search of the claws bugzilla.
The closest I came was a message about the cache not keeping accurate information. There was a claws-mail update at the end of May, but it had been working fine since then up until now. And, it's possible it's some sort of Fedora issue (?), because I had opened my 'home' folder on my desktop to check the claws folder, and now I see that there's a gaping hole on my desktop where that folder should be. I can get there by clicking 'places' and 'Home Folder'. Any other reports of disappearing folders and email?
i'm currently using the claws mail rssyl plugin to manage my rss feeds, but i have two issues with it:
1) when i delete an rss item it reappears when i refresh the feed 2) when i mark all posts of a feed as read, a little while later (for example) 5 of the 20 items become new/unread again. these unread items are random (not the latest posts)
the only pattern i can see (regarding issue #2) is that it only affects feeds hosted on videos. i'm thinking of finding a different application to manage my rss feeds, but it is nice to have email and feeds in once place.
i have a VPS running Ubuntu server 9.10 i have installed postfix and courier folloiwng a tutorial on How to forge.i have installed also squirrelmail When i ran squirrelmail , i tried to send a mail to myself to see if it was working. Mail appear in the Sent folder of Squirrelmail However, the INBOX was still showing no messages when i logged in to the server, i see that mail was delivered in var/mail/info (my username). so, my question is: why mail gets delivered to var/mail and var/spool and squirrelmail is not pickiing it up?
I use Evolution mail and use 2 PCs When I send mail it saves it to my current PC but not to the other PC so instead i want it to save the sent to the email server i'm using.
in Lucid ive been trying to get the mail applet to light up green by sending myself mail. Does this applet only light up when IMs r received or does this also work with evolution and if so what might i have done wrong in evolution, ive tried it with evolution open and evolution closed.
I have set up postfix and dovecot as per the Ubuntu anual and appear to have a functioning mail server.Using the sendmail command I can send mail and I receive mail in ~/Maildir. Using Thunderbird I can read any mails received but I can't send any mail from Thunderbird. I have tried with both STARTTLS and SSL/TLS and whilst I get the prompt for a password I keep getting the message my password for my server is wrong.I have ports 25, 465, 587 and 993. Is that all the right ports?When I ping my domain name it resolves to my router name whereas I believe it should resolve to my IP. Could there be a problem with my host file? I've had a play but to no avail.Here's the error in mail.log.
Our primary mail server is Exchange 2003 Standard on Windows Server 2003 Standard - don't shout at me; I inherited it already set up this way.I have a couple of hardware identical redundant servers (HP ML350 boxes), all with very fast 2 or 4 disk arrays, multiple core CPUs and plenty of memory, and I am looking at two potential new additions to the infrastructure.
A secondary mail server is high on my list of priories. I've been well and truly bitten by Exchange in the past and given that this particular box has been running four years straight and that it's mail store is dangerously large, having a secondary mail server in place suddenly makes a lot of sense.
A new Exchange 2010 box is currently being set up, but the secondary mail server will remain in place even when the new Exchange server is brought online, so this won't be a wasted exercise.... I also want a gateway box in place to filter and relay mail to the primary server, or to the secondary server if the primary is unavailable. Currently our outer perimeter is:
Untangle running in bridged mode (primarily used for SPAM filtering, URL blacklisting, and very little else) Exchange 2003 sits behind the Untangle box. This is how I want to end up:
CISCO >> Draytek >> Ubuntu gateway >> Exchange/secondary mail server
I know I could replace/remove the Draytek but I want it to remain for several reasons, including lots of VPN dial-in users already configured and that it offers us an additional layer of email antivirus scanning before things hit the Exchange box. No point switching all of our remote workers over to new tunnels unnecessarily...
I have done some research and have started testing a pilot secondary mail server using Ubuntu/postfix DNS is properly set up and MX records and reverse PTR records are all present and correct, and things are looking encouraging so far. Before I go out over deep waters and start to flounder, has anyone who has done something like this got any obvious howlers I should be looking to avoid ?
I set up my mail server using the guide here: [URL] I am able to receive mail, I can send mail locally, but I can't send to external addresses. This is in my mail.log: Quote: Jun 30 14:40:43 Server postfix/smtp[10725]: 2FD9322015BF: to=<myemail@gmail.com>, relay=none, delay=1634, delays=1484/0.02/150/0, dsn=4.4.1, status=deferred (connect to alt4.gmail-smtp-in.l.google.com[74.125.65.27]:25: Connection timed out)
The scenario: We have an external server that runs HTTP/DB servers for out shop system. Then, there's our local, in-house infrastructure that runs a.. yeah... Exchange 2010. The shop system on the external server needs to send mails to customers (order confirmations, invoices, etc.). seing as sending them directly through the local MTA (Postfix) would cause mail delivery problems because of reverse DNS issues, i've set the Postfix MTA to act as a satellite to our in-house Exchange Server, so the Exchange sends the mail instead, giving recipient mail servers a valid reverse DNS lookup.
Now, mails sent by the (proprietary, uneditable) shop system are relayed correctly and sent to the target e-mail address. My problem is: Mails not sent by the shop system, but by our own PHP scripts which run on that same external servers, are NOT relayed properly. So the Exchange is fine with the mails sent by the shop system, but not the mails sent by our scripts. This is what i get in the mail.log: The successfully relayed mail sent by the shop system:
I just added my login id to /etc/aliases to forward root's local e-mail to my local e-mail account in evolution.
As always, when I make a change to /etc/aliases, I run newaliases. I now get the following, and root's mail is not showing up in my local mail Inbox:
Code:
Is this correct?
I understand my hostname (i.e., Eng-Lab-010) is not a fully qualified host name, but I never had a problem before. But it appears this not a good thing. What should I do?
I have installed F11 on my server bythis article! I have problem with certificatewhen I connectin from clients computers to my mail server for reciving mail! I have warning like this
I have got a nagios server running on my network, The configuration seems to be okay but each time there is a service alert notification, and an e-mail is sent to the contact group, Nagios continuously sends e-mail over and over again. Do anyone know of a way to set Nagios directives to only send one e-mail per alert without it flooding mail boxes.
I had configured sendmail on linux 5.2, Iam using public ip and my domain is registered[linuxforfreshers.info]. I am facing a issue that when I mail with the user sumit@linuxforfreshers.info then I am able to do it. But if somebody tries to send mail to the same user then it bounce backs. I had made the entry of domain in /etc/mail/local-host-name and also I put ok in /etc/mail/access.The mails are working properly with in LAN. But not able to work on WAN only I can send mail but not able to recieve mail.What else I need to do.
