I have the newest ubuntu version (64Bit) with claws mail 3.7.4. When I click:
Configuration->Plugins->Load
And select the python plugin, claws crashes as soon as I clock ok.
I'm trying to install the plug-in Gtkhtml2Viewer on my Debian Lenny system for claws-mail. I have installed claws-mail 3.7.5 from backports. When I try to install the plug-in, I get the following response:
Code:
mark@debian:~/stuff/debs/source/gtkhtml2_viewer-0.27$ ./configure
[..]
checking for GNU gettext in libc... yes
checking whether to use NLS... yes
checking where the gettext function comes from... libc
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for CLAWS_MAIL... configure: error: Package requirements (claws-mail >= 3.4.0.1) were not met:
No package 'claws-mail' found.
Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables CLAWS_MAIL_CFLAGS
and CLAWS_MAIL_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details.
mark@debian:~/stuff/debs/source/gtkhtml2_viewer-0.27$
Since I have version 3.7.5, I would think that the above cited requirement of "claws-mail >= 3.4.0.1" would be met. However, for some reason, it states that "No package 'claws-mail' found", which is strange.
I have been trying to install the plug-in vcalendar for claws-mail. I use Debian Lenny, and I have installed claws-mail 3.7.5 from backports. I tried installing the plug-in, but get the following response:
Code:
mark@debian:~/stuff/debs/source/vcalendar-2.0.8$ ./configure
[..]
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for CLAWS_MAIL... configure: error: Package requirements (claws-mail >=
3.6.1.27) were not met:
No package 'claws-mail' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables CLAWS_MAIL_CFLAGS
and CLAWS_MAIL_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
mark@debian:~/stuff/debs/source/vcalendar-2.0.8$
I'm not sure why it didn't find ANY package of claws-mail. Further, 3.7.5 should be good enough, since it is newer than the required 3.6.1.27.
i'm currently using the claws mail rssyl plugin to manage my rss feeds, but i have two issues with it:
1) when i delete an rss item it reappears when i refresh the feed
2) when i mark all posts of a feed as read, a little while later (for example) 5 of the 20 items become new/unread again. these unread items are random (not the latest posts)
the only pattern i can see (regarding issue #2) is that it only affects feeds hosted on videos. i'm thinking of finding a different application to manage my rss feeds, but it is nice to have email and feeds in once place.
I am suddenly experiencing problems with disappearing e-mails in Claws Mail. They seem to disappear somehow during the download process. Running Claws Mail from the terminal gives me the following errors, but I am not sure that this is related to the problems with my other accounts:
Code:
** (claws-mail:12020): WARNING **: [11:45:58] IMAP error on imap.gmail.com: STATUS error
** (claws-mail:12020): WARNING **: [11:45:59] IMAP error on imap.gmail.com: STATUS error
** (claws-mail:12020): WARNING **: [11:46:00] IMAP error on imap.gmail.com: STATUS error
I am using Claws Mail version 3.7.4 with Linux Mint 9 (LXDE). I have googled a lot, but I haven't been able to come up with a satisfactory answer. It may have something to do with some upgraded gnu utilities, but I am not sure what this is in reference to. BTW, all of my accounts use IMAP.
I can't encrypt my e-mails in Claws Mail (3.7.8, slackbuilds.org) on my Slackware 13.1 system. I have the PGP/Core and PGP/MIME plugins loaded. I can verify the signatures of incoming messages and sign outgoing messages, but not encrypt them. Even though there is only one key associated to the recipient's email, Claws can't find it and the "Select Key" dialog displays an empty list of keys.
View 3 Replies View RelatedI am using Claws Mail version 3.7.3 on Ubuntu 9.10. In the last few days, replies that I receive often have the original (quoted) text replaced with an ellipsis [ ... ]. For example, I see: Where the ellipsis is a hyperlink (?), that when double-clicked displays the remainder of the message, as Claws had normally been doing: If I forward the message, everything is included / shown, as expected. It's very annoying to have this program suddenly start behaving this way: When I receive / read a reply, I want to see the entire message ('thread') displayed, not this [... ] ellipsis (hidden original message(s)).
View 1 Replies View RelatedTrying to transfer to claws mail from kmail, I have problem in sending emails: It doesn't send email through one of my accounts (a university account) and says: An "error happened during SMTP session". My other university account works!
View 3 Replies View RelatedI just started using suse, so a few questions claws-mail 3.7.5, I have no print capabilities, there is no print icon showing, also the spam filter is greyed out. I have loaded bogofilter, but I noticed the amount of rpms listed is much less than my last distro, including the advanced filtering. Are these rpms on another repo somewhere.
View 9 Replies View RelatedI had claws mail 3.7.6 installed with mint 10 and all was well. I use gmail with ssl and was no problem. I wanted to download some add-ons for claws, but most were only compatible with version 3.7.8, so I downloaded and installed 3.7.8 only to find that it doesn't support ssl connection, so I can't use it for my gmail account.
View 2 Replies View RelatedUntil the latest update to php, claws-mail was running fine. Since updating php through slackpkg, Claws will start but as soon as a message is selected it crashes with the following message (caught in terminal)
root[/]# claws-mail
Newmail plugin loaded
Message header summaries written to /home/pat/Mail/NewLog
Segmentation fault
root[/]#
As usual, I'm lost and wandering in the darkness.
I recently decided to switch back to a stand alone email client from gmail. I started with thunderbird, which had a very intuitive user interface and was working fairly well, except for the fact that when it wasn't supposed to be doing anything, it was taking up about 40% of my CPU (this is after it had downloaded all the emails, so there really wasn't anything that needed that much cpu usage from my perspective). After investigating that a bit, I decided I'm going to go for something lighter, and now I'm trying to claws-mail. This one is fast and quick, with very little bells and whistle, and I think it has the potential of keeping me happy.
However, there are few things that I can't figure out how to do. The two main ones right now are: How do I make it download all the emails in at least the inbox folder? I'm using imap protocol with gmail, and I'm happy that the two mailboxes are very well synced, however the only thing it is downloaded by default is the email header, and not the content. I would like to be able to download the content immediately, so I can read the email offline as well. How can I set up GPG to sign my emails automatically? In claws-mail to sign my emails, I need to go to the Options->Privacy Options->PGP Mime, followed by Options->Sign. Is it possible to make this the default option?
I want to change the polling order of my two email accounts, but I can't figure it out. I have two IMAP accounts in Claws-Mail, one for work and one for 'other'. The work account is set as default. It is uppermost in the left pane. It is marked 'MH', which I think is to do with storage of the downloaded emails. Claws-Mail always polls my 'other' account first. This takes ages and prevents me getting my work email. How can I make sure the work account is polled first?
View 2 Replies View RelatedI just upgraded from fc11 to fc12 with a great deal of trouble...finally am partially functional. The problem really bugging me is the missing claws-mail toolbar that shows "tools", addressbook, encrypt/decrypt, and especially the ability to load plugins, and set all preferences. I have tried uninstalling & reinstalling but nothing provides the toolbar I need. Yum does not provide anything new either. As most of my important passwords are encrypted, and I need the claws pgp plugin to be loaded.
View 2 Replies View RelatedI've got a problem with the Claws-mail client. Couple of days ago I have updated the client to its newest version 3.7.8. Because I couldn't find a ready-made package for Slackware 13.0 I've downloaded the source, unpacked to a folder and using src2slack created a package. Package has been created using default settings. And when done upgraded as it should be with upgradepkg. And it was very nice until I've noticed that Claws didn't load into the tray.
Went into plugin loading screen and saw that the trayicon plugin isn't loaded. This one is easy I thought and loaded the plugin. And then it happened. The plugin didn't load but instead it spit out this message: "The following error occurred while loading Trayicon.so : /usr/lib/claws-mail/plugins/trayicon.so: undefined symbol: gtk_status_icon_set_title". I've found what this symbol should do (or so I think) but it doesn't get me anywhere. I would really like to drop claws into the tray.
I've tried this several times and cannot get claws-mail to run. Libetpan has been installed, removed and re-installed. When trying to start c-mail it say cannot find libetpan.so.13 which is accurate - the current installation of libetpan puts in libetpan.so.15. These packages all come from slackbuilds (have also tried Alien's package wtih the same results). This a standard 13.1 install with regular updates through slackpkg.
View 10 Replies View RelatedI haven't logged on to Fedora for a few days, but I did this morning and opened claws mail and clicked 'get mail' and it proceeded to download new messages. However, when I clicked on the inbox folder, the email count changed to zero! No email. I checked and found the folderlist.xml has the correct Mail folder location, and when I went to that location, (on a shared data partition) indeed the 'inbox' folder was EMPTY. No files at all. I'd had a similar issue once, but the email #MH location wasn't correct, so when I fixed it, the email appeared. I did a web search and a search of the claws bugzilla.
The closest I came was a message about the cache not keeping accurate information. There was a claws-mail update at the end of May, but it had been working fine since then up until now. And, it's possible it's some sort of Fedora issue (?), because I had opened my 'home' folder on my desktop to check the claws folder, and now I see that there's a gaping hole on my desktop where that folder should be. I can get there by clicking 'places' and 'Home Folder'. Any other reports of disappearing folders and email?
i have just upgraded to 10.10 from 10.04. i have an acer netbook (d250 one). i had boot loading screen problems with 10.04 too. i hoped that this issue will be fixed with the upgrade but not. after the grub menu, a black screen appers until the password prompt screen. there is no purple loading screen, just a black screen. is it a plymouth prob? also i realised that when i playing videos in videos the sound crashes a bit. i'm using google chromium. but my main problem is the booting one not the flashplugin. the new 'ubuntu' font is awesome. i <3 it.
View 9 Replies View RelatedTry to load my system today and nothing come up, only the terminal window. Whatever I type in is working, like now I type in the terminal firefox and it is how I ended up here. Try to type thunderbird in the terminal and my mail server started no problem. But nothing on my screen, don't no where to go from here.
View 9 Replies View RelatedEvery time i go to use my java the plugin /usr/lib/jvm/java-6-openjdk/jre/lib/i386/IcedTeaPlugin.so crashes. I redownloaded it a few times and the same thing happens. but it works for awhile then stops.
View 2 Replies View RelatedRunning it from a terminal, every few minutes this happens:(evolution:25607): libsoup-CRITICAL **: set_ current_request: assertion `priv->cur_req == NULL' failed Segmentation fault..Found lots of cases that mention Gentoo (and Evolution 2.4) and this bug, but nothing with Debian. Bug is apparently due to the version of libsoup that Evolution is compiled against.Install is relatively fresh; about a day old. Packages are the latest updates.
View 1 Replies View RelatedOver the past week or so, I've posted a few message about what looked like general stability problems in lucid, then problems specifically with Thunderbird.
Today I found it isn't just Thunderbird. I tried Claws Mail and Kmail, and all of them exhibit the same symptoms as Thunderbird:
- The app randomly hangs, crashes or stops connecting to the mail server.
- Quitting the app randomly takes down other applications. (Uh-oh -- modern OSs are supposed to prevent one application from corrupting another.)
- Once the problems start, any application is likely to have stability problems -- e.g., this morning, when Kmail started buggering up, I launched the software center to uninstall it and the window never appeared. A box showed up in the window panel at the bottom of the screen at first, but when it was time to draw the window, kaboom.
(I'm currently not using Evolution because of issues with syncing message deletion back to the server. Plus, at least once, Evolution lost its connection to the mail server. I don't remember serious instability with it, but I wasn't looking for the instability either. It might well be just as bad as the others.)
So, we have an issue triggered by multiple applications, and the issue is not limited to one unstable process on the machine (one unstable process makes other processes unstable). That smells like a kernel bug.
I'm wondering if anyone else has seen anything like this? I'm using the amd64 version on a MSI A6200, Intel Core i3 processor. I'll have to doublecheck the kernel version. When I installed the OS, it was (something-something).21 and now (after the first round of automatic system updates) it's .24 - "something-something" is whatever the standard kernel is when you download the amd64 CDROM image.
As long as I'm not running a mail client (apparently, any mail client), the system is stable. So it looks very much like there is something that mail clients do, which other applications tend not to do, which is broken.
My Java plugin is not loading on Firefox. I need it to load, but FF doesn't even recognize Java is installed. It works on Google Chrome (which would be nice... except the plugin is buggy there)
Here's the background
* I'm running Firefox 3.6.3, through the repository on
Code: [URL]
* My process list includes:
Code:
23679 ? 00:00:00 firefox
23688 ? 00:07:31 firefox-bin
* I run NoScript, but I've had it work before w/NoScript, and everything is currently allowed. I'm fairly sure it has rather to do with FF 3.6.3.
* My about.config settings:
Code:
java.default_java_location_others;/usr/java
java.default_java_location_solaris;/usr/j2se
java.global_java_version_file;/etc/.java/versions
java.java_plugin_library_name;javaplugin_oji
* My directory settings:
Code:
patrick@patrick-laptop:/usr/lib/jvm$ ls
java-6-sun java-6-sun-1.6.0.15
Evolution keeps crashing everytime I send mail. I am also constantly asked for my keyring or email passwords. I checked the log and found this error message.
"CRITICAL **: mail_session_refresh_cb: assertion 'service != NULL' failed"
This message was in a bug report from 2013 that seems to be closed.: https://bugs.debian.org/cgi-bin/bugrepo ... bug=730256
My system : Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt11-1+deb8u2 (2015-07-17)
synaptic package manager says my evolution and keyring are the latest.
I usually run Xfce if that means anything.
I have tried everything I can think of to get the Java plugin working on Centos 5.5 and Firefox.I'm using the sun version of Java that I downloaded: jdk-6u18-linux-i586.rpm
I do have it installed already on a seperate partition that survives OS upgrades. Do I need to have the same version of Java in my alternatives dir, or will the Java browser plugin work regardless of which Java is installed on the system? Another way of expressing this: Is the Java browser plugin a standalone application that works independently of the system-installed Java version, or does the browser plugin rely on the installed JRE to function? So I have made a symbolic link from /usr/lib/mozilla/plugins/@libjavaplugin_oji.so
to my Java plugin, under:
/usr/local/java/jdk1.6.0_18/jre/plugin/i386/ns7/libjavaplugin_oji.so
There are actually 2 versions of the Java plugin - which one should I be using?
/ns7
/ns7-gcc29
I take it it's the non-gcc29 version? When I restart Firefox nothing is showing in the about :plugins window.I have disabled all the other mozilla plugins, just in case they are stopping the the Java plugin from loading.
KDE just upgraded on my installation of Slackware to 4.3.5 and it doesn't show my Yahoo Messenger in the list of accounts. When I try to re-add it, I get this message:
Quote:
Cannot load the Yahoo protocol plugin
It worked fine in KDE 4.3.4 (with the exception that Yahoo disconnected every couple of hours or so for a few seconds before reconnecting).
I'm not even sure which Slackware package includes Kopete...
Slackware-current, KDE 4.3.5
I have just installed the newest version of ubuntu (10.10 the maverick meerkat) and im struggling installing any programs, wine and vlc arnt appearing on synaptic package manager and anything i try to do in either the command promt or ubuntu software centre doesnt work either. On the command promt when i follow the commands as seen on various tutourials the command promt comes back with an error. VLC example given below.
[Code]...
i have a VPS running Ubuntu server 9.10 i have installed postfix and courier folloiwng a tutorial on How to forge.i have installed also squirrelmail When i ran squirrelmail , i tried to send a mail to myself to see if it was working. Mail appear in the Sent folder of Squirrelmail However, the INBOX was still showing no messages when i logged in to the server, i see that mail was delivered in var/mail/info (my username). so, my question is: why mail gets delivered to var/mail and var/spool and squirrelmail is not pickiing it up?
View 1 Replies View RelatedI just added my login id to /etc/aliases to forward root's local e-mail to my local e-mail account in evolution.
As always, when I make a change to /etc/aliases, I run newaliases. I now get the following, and root's mail is not showing up in my local mail Inbox:
Code:
Is this correct?
I understand my hostname (i.e., Eng-Lab-010) is not a fully qualified host name, but I never had a problem before. But it appears this not a good thing. What should I do?
Yesterday I wasn't able to successful enable JRE in my firefox.This is what I did ,
I downloaded the rpm from the file and installed it in /usr/java Code: chmod a+x jre-6u<version>-linux-i586-rpm.bin./jre-6u<version>-linux-i586-rpm.bin This successfully installed Firefox JRE in my system now in order to make firefox know abt it
I went to /usr/lib/firefox/plugins and
Code:
ln -s /usr/java/jre1.6.0_24/lib/i386/libnpjp2.so as said in the instruction manual. Still firefox isn't able to recognise the plugin.
