Software :: How To Install VCalendar Plugin In Claws Mail

Sep 12, 2010

I have been trying to install the plug-in vcalendar for claws-mail. I use Debian Lenny, and I have installed claws-mail 3.7.5 from backports. I tried installing the plug-in, but get the following response:

Code:
mark@debian:~/stuff/debs/source/vcalendar-2.0.8$ ./configure
[..]
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for CLAWS_MAIL... configure: error: Package requirements (claws-mail >=
3.6.1.27) were not met:

No package 'claws-mail' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables CLAWS_MAIL_CFLAGS
and CLAWS_MAIL_LIBS to avoid the need to call pkg-config.

See the pkg-config man page for more details.
mark@debian:~/stuff/debs/source/vcalendar-2.0.8$
I'm not sure why it didn't find ANY package of claws-mail. Further, 3.7.5 should be good enough, since it is newer than the required 3.6.1.27.

View 1 Replies


ADVERTISEMENT

Software :: Installing Plugin Gtkhtml2Viewer In Claws Mail?

Sep 12, 2010

I'm trying to install the plug-in Gtkhtml2Viewer on my Debian Lenny system for claws-mail. I have installed claws-mail 3.7.5 from backports. When I try to install the plug-in, I get the following response:

Code:
mark@debian:~/stuff/debs/source/gtkhtml2_viewer-0.27$ ./configure
[..]
checking for GNU gettext in libc... yes
checking whether to use NLS... yes
checking where the gettext function comes from... libc
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for CLAWS_MAIL... configure: error: Package requirements (claws-mail >= 3.4.0.1) were not met:

No package 'claws-mail' found.
Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables CLAWS_MAIL_CFLAGS
and CLAWS_MAIL_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details.

mark@debian:~/stuff/debs/source/gtkhtml2_viewer-0.27$
Since I have version 3.7.5, I would think that the above cited requirement of "claws-mail >= 3.4.0.1" would be met. However, for some reason, it states that "No package 'claws-mail' found", which is strange.

View 2 Replies View Related

Ubuntu Installation :: Claws Mail Crashing When Loading Plugin

Sep 29, 2010

I have the newest ubuntu version (64Bit) with claws mail 3.7.4. When I click:
Configuration->Plugins->Load
And select the python plugin, claws crashes as soon as I clock ok.

View 2 Replies View Related

Software :: Claws Mail RSSyl Plugin - Deleted RSS Items Reappears

Jan 16, 2011

i'm currently using the claws mail rssyl plugin to manage my rss feeds, but i have two issues with it:

1) when i delete an rss item it reappears when i refresh the feed
2) when i mark all posts of a feed as read, a little while later (for example) 5 of the 20 items become new/unread again. these unread items are random (not the latest posts)

the only pattern i can see (regarding issue #2) is that it only affects feeds hosted on videos. i'm thinking of finding a different application to manage my rss feeds, but it is nice to have email and feeds in once place.

View 2 Replies View Related

Ubuntu :: E-mail Disappears In Claws Mail?

Feb 4, 2011

I am suddenly experiencing problems with disappearing e-mails in Claws Mail. They seem to disappear somehow during the download process. Running Claws Mail from the terminal gives me the following errors, but I am not sure that this is related to the problems with my other accounts:

Code:
** (claws-mail:12020): WARNING **: [11:45:58] IMAP error on imap.gmail.com: STATUS error
** (claws-mail:12020): WARNING **: [11:45:59] IMAP error on imap.gmail.com: STATUS error
** (claws-mail:12020): WARNING **: [11:46:00] IMAP error on imap.gmail.com: STATUS error

I am using Claws Mail version 3.7.4 with Linux Mint 9 (LXDE). I have googled a lot, but I haven't been able to come up with a satisfactory answer. It may have something to do with some upgraded gnu utilities, but I am not sure what this is in reference to. BTW, all of my accounts use IMAP.

View 2 Replies View Related

Slackware :: GPG Encryption In Claws Mail 3.7.8

Feb 1, 2011

I can't encrypt my e-mails in Claws Mail (3.7.8, slackbuilds.org) on my Slackware 13.1 system. I have the PGP/Core and PGP/MIME plugins loaded. I can verify the signatures of incoming messages and sign outgoing messages, but not encrypt them. Even though there is only one key associated to the recipient's email, Claws can't find it and the "Select Key" dialog displays an empty list of keys.

View 3 Replies View Related

OpenSUSE :: Claws Mail 3.7.5 - No Print Capabilities

Nov 8, 2010

I just started using suse, so a few questions claws-mail 3.7.5, I have no print capabilities, there is no print icon showing, also the spam filter is greyed out. I have loaded bogofilter, but I noticed the amount of rpms listed is much less than my last distro, including the advanced filtering. Are these rpms on another repo somewhere.

View 9 Replies View Related

General :: Claws Mail 3.7.8 Does Not Support SSL Connection

Dec 15, 2010

I had claws mail 3.7.6 installed with mint 10 and all was well. I use gmail with ssl and was no problem. I wanted to download some add-ons for claws, but most were only compatible with version 3.7.8, so I downloaded and installed 3.7.8 only to find that it doesn't support ssl connection, so I can't use it for my gmail account.

View 2 Replies View Related

Slackware :: Odd Crash With Claws Mail After PHP Update

Jan 14, 2011

Until the latest update to php, claws-mail was running fine. Since updating php through slackpkg, Claws will start but as soon as a message is selected it crashes with the following message (caught in terminal)

root[/]# claws-mail
Newmail plugin loaded
Message header summaries written to /home/pat/Mail/NewLog
Segmentation fault
root[/]#

As usual, I'm lost and wandering in the darkness.

View 2 Replies View Related

Fedora :: Claws Mail 3.7.3 - Missing Toolbar After FC Upgrade

Dec 8, 2009

I just upgraded from fc11 to fc12 with a great deal of trouble...finally am partially functional. The problem really bugging me is the missing claws-mail toolbar that shows "tools", addressbook, encrypt/decrypt, and especially the ability to load plugins, and set all preferences. I have tried uninstalling & reinstalling but nothing provides the toolbar I need. Yum does not provide anything new either. As most of my important passwords are encrypted, and I need the claws pgp plugin to be loaded.

View 2 Replies View Related

Ubuntu :: Claws Mail - Ellipsis Instead Of Included Text

Mar 1, 2010

I am using Claws Mail version 3.7.3 on Ubuntu 9.10. In the last few days, replies that I receive often have the original (quoted) text replaced with an ellipsis [ ... ]. For example, I see: Where the ellipsis is a hyperlink (?), that when double-clicked displays the remainder of the message, as Claws had normally been doing: If I forward the message, everything is included / shown, as expected. It's very annoying to have this program suddenly start behaving this way: When I receive / read a reply, I want to see the entire message ('thread') displayed, not this [... ] ellipsis (hidden original message(s)).

View 1 Replies View Related

Ubuntu :: Claws Mail - Error During SMTP Session

Oct 18, 2010

Trying to transfer to claws mail from kmail, I have problem in sending emails: It doesn't send email through one of my accounts (a university account) and says: An "error happened during SMTP session". My other university account works!

View 3 Replies View Related

Slackware :: Claws Mail 3.7.8 - No Icon Loaded Into Tray

Jan 2, 2011

I've got a problem with the Claws-mail client. Couple of days ago I have updated the client to its newest version 3.7.8. Because I couldn't find a ready-made package for Slackware 13.0 I've downloaded the source, unpacked to a folder and using src2slack created a package. Package has been created using default settings. And when done upgraded as it should be with upgradepkg. And it was very nice until I've noticed that Claws didn't load into the tray.

Went into plugin loading screen and saw that the trayicon plugin isn't loaded. This one is easy I thought and loaded the plugin. And then it happened. The plugin didn't load but instead it spit out this message: "The following error occurred while loading Trayicon.so : /usr/lib/claws-mail/plugins/trayicon.so: undefined symbol: gtk_status_icon_set_title". I've found what this symbol should do (or so I think) but it doesn't get me anywhere. I would really like to drop claws into the tray.

View 3 Replies View Related

Slackware :: Claws Mail Not Running - Cannot Find Libetpan.so.13

Nov 25, 2010

I've tried this several times and cannot get claws-mail to run. Libetpan has been installed, removed and re-installed. When trying to start c-mail it say cannot find libetpan.so.13 which is accurate - the current installation of libetpan puts in libetpan.so.15. These packages all come from slackbuilds (have also tried Alien's package wtih the same results). This a standard 13.1 install with regular updates through slackpkg.

View 10 Replies View Related

Fedora :: Claws Mail - Email Count Goes To 0 (Inbox Empty)

Jul 29, 2010

I haven't logged on to Fedora for a few days, but I did this morning and opened claws mail and clicked 'get mail' and it proceeded to download new messages. However, when I clicked on the inbox folder, the email count changed to zero! No email. I checked and found the folderlist.xml has the correct Mail folder location, and when I went to that location, (on a shared data partition) indeed the 'inbox' folder was EMPTY. No files at all. I'd had a similar issue once, but the email #MH location wasn't correct, so when I fixed it, the email appeared. I did a web search and a search of the claws bugzilla.

The closest I came was a message about the cache not keeping accurate information. There was a claws-mail update at the end of May, but it had been working fine since then up until now. And, it's possible it's some sort of Fedora issue (?), because I had opened my 'home' folder on my desktop to check the claws folder, and now I see that there's a gaping hole on my desktop where that folder should be. I can get there by clicking 'places' and 'Home Folder'. Any other reports of disappearing folders and email?

View 3 Replies View Related

Ubuntu :: Claws Mail - How To Setup GPG To Sign Emails Automatically

Aug 13, 2010

I recently decided to switch back to a stand alone email client from gmail. I started with thunderbird, which had a very intuitive user interface and was working fairly well, except for the fact that when it wasn't supposed to be doing anything, it was taking up about 40% of my CPU (this is after it had downloaded all the emails, so there really wasn't anything that needed that much cpu usage from my perspective). After investigating that a bit, I decided I'm going to go for something lighter, and now I'm trying to claws-mail. This one is fast and quick, with very little bells and whistle, and I think it has the potential of keeping me happy.

However, there are few things that I can't figure out how to do. The two main ones right now are: How do I make it download all the emails in at least the inbox folder? I'm using imap protocol with gmail, and I'm happy that the two mailboxes are very well synced, however the only thing it is downloaded by default is the email header, and not the content. I would like to be able to download the content immediately, so I can read the email offline as well. How can I set up GPG to sign my emails automatically? In claws-mail to sign my emails, I need to go to the Options->Privacy Options->PGP Mime, followed by Options->Sign. Is it possible to make this the default option?

View 1 Replies View Related

Ubuntu :: Claws Mail - How To Change Account Poll Order

Nov 9, 2010

I want to change the polling order of my two email accounts, but I can't figure it out. I have two IMAP accounts in Claws-Mail, one for work and one for 'other'. The work account is set as default. It is uppermost in the left pane. It is marked 'MH', which I think is to do with storage of the downloaded emails. Claws-Mail always polls my 'other' account first. This takes ages and prevents me getting my work email. How can I make sure the work account is polled first?

View 2 Replies View Related

Ubuntu Installation :: Software Centre Doesn't Work - Error "sudo Apt-get Install Vlc Vlc-plugin-pulse Mozilla-plugin-vlc"

Jan 31, 2011

I have just installed the newest version of ubuntu (10.10 the maverick meerkat) and im struggling installing any programs, wine and vlc arnt appearing on synaptic package manager and anything i try to do in either the command promt or ubuntu software centre doesnt work either. On the command promt when i follow the commands as seen on various tutourials the command promt comes back with an error. VLC example given below.

[Code]...

View 5 Replies View Related

Red Hat :: Install Davmail As Mail Client For MS Exchange Mail System?

Jun 1, 2010

i have redhat linux 5 (2.6.18-53.el5) and i am trying to install davmail as mail client for MS exchange mail system. i am trying to install davmail latest i.e 3.6.6-1032 x86 version. i installed java 1.6. and excuted java -version. it showed me correct version. i.e java 1.6. but when i ran ./davmail.sh it gave me following message it opened port 389 and the next message was DEBUG (checkrelease) davmail: unable to get released version what could be the problem

View 1 Replies View Related

Debian :: Display Of Fonts With Iceweasel And Claws

Mar 14, 2010

Some fonts or lettering produces gobble-di-gook rather than a proper display in both iceweasel and claws mail reader. Usually punctuation (like ") results in this. For instance, from the site Clean Debian Etch Install, I get the following:

Code: The �€˜Choose country or region�€™ screen will appear, select �€˜United States�€™ or your preferred country. I'm assuming the above should display as, Code: The "Choose country or region" screen will appear, select "United States" or your preferred country.

View 4 Replies View Related

Software :: Is It Worth To Switch From Thunderbird To Claws

Aug 23, 2010

I've been using Thunderbird for a lot, but I would like a lighter mail client. I was checking Sylpheed but it lacks of HTML rendering for incoming messages, and that is a "must" for me. Then I realized that Claws started as a parallel branch of Sylpheed but included those features Sylpheed doesn't have (one of them is the HTML rendering).

I would like to know if Claws is as light as Sylpheed to see if it's worth it to switch to Claws, because the reason to switch is to get a lighter mail client.

View 2 Replies View Related

Fedora :: Running The Zotero Openoffice Integration Plugin In F13 Under The Openjdk Plugin?

May 31, 2010

I',m having trouble running the zotero openoffice integration plugin in F13 under the openjdk plugin.It's known top be not working as per The problem lies in some permissions as reported here -fedora-linux/However i want to know if there's any progress on it, since i dont have privilege to install it in my lab computer. Also i found this old bug reportwhich seems to have something done.If anypone has any idea please post, else i think i need to file a new bug report.EDIT: I'd be glad even if someone can guide me to write local policy (.java.policy) to enable the plugin

View 1 Replies View Related

SUSE / Novell :: Flash Plugin For Mozilla Plugin Doesn't Work

Nov 26, 2009

I am using openSUSE 11.0. This OS installation gives firefox 3.0.5 Beta. I had installed new version of firefox at /usr/local/bin/firefox. I had placed link of this firefox at /usr/bin using this command ->

Code:

linux-snvz:/usr/bin # ln -s /usr/local/bin/firefox/firefox firefox My older firefox contains the flush plugin. So i can easily played ..... video's in my browser. But now my new browser saying that it doesn't have flash plugin. I was tried to install flash plugin once again.

[Code]...

Even after installation also my browser is again without flash plugin.

View 3 Replies View Related

OpenSUSE Multimedia :: Package-Kit-gstreamer-plugin Requires An Additional Plugin To Decode File

Jul 21, 2010

I just updated my distribution to 11.3 from 11.2. But now this problem occurs when I try to play an mp3. There was no problem before with 11.2.

It also says

Code:
The following plugin is required : MPEG-4 AAC decoder

Only certain mp3s have this problem. All gstreamer packages have been installed. What package is missing anyway?

View 1 Replies View Related

Ubuntu :: Add Xfce4-xkb-plugin / Keyboard Layout Plugin At Startup?

Feb 28, 2010

i have this-for me huge problem- xfce4-xkb-plugin won�t save my keyboard setup and it won�t show after startup in xfce4 panel (xubuntu 9.10): I did this:

1) i added in /etc/default/console-setup needed keyboard layouts (de,hr,rs)-because i know that after restart xfce4-xkb-plugin will not memorize my layouts.

[Code]....

View 9 Replies View Related

Ubuntu :: Plugin Error: Unable To Activate Plugin Cover Art

Jan 17, 2011

While using Rhythmbox this morning, I was greeted by a blunt and undiscriptive error message:

Code:

Plugin Error:Unable to activate plugin Cover Art.Going to the plugin page, I was supprised to find that most of the installed plugins would not load. Without any info being offered in the player, I looked on line. Many people had problems with other plugins, and most of the time it was a problem with an uninstalled python package. But I checked on this site and I found that I had all of these packages installed. (Well, the python ones at least, to check all of them would take forever.)

Code:

[URL]

After finding no help there, I ran rhythmbox -d to debug:

Code:

(12:04:33) [0x934fe68] [rb_python_module_init] rb-python-module.c:406: Init of python module
(rhythmbox:4971): Rhythmbox-WARNING **: unable to load module as python runtime could not be initialized

[code]....

View 1 Replies View Related

Fedora :: Install The Plugin Cvim.zip ?

Jan 20, 2011

I want to install the plugin cvim.zip but when i make a file call ~/.vim is said there is one but i can't find where i need to put it.

View 4 Replies View Related

Fedora :: Can't Install A Plugin In Gimp

Jun 14, 2011

I would like to install a plugin in gimp in my Fedora 15 box. The plugin is about wavelet decompose: [URL] and it is necessary to compile the plugin.

I downloaded from here: [URL] but when i follow the instructions of the install file (make & make install) i always got this:

[root@localhost wavelet-decompose-0.1.2]# make
make -C po
make[1]: Entering directory `/home/joseda/wavelet-decompose-0.1.2/po'
msgfmt -c -v -o de.mo de.po
17 translated messages.

[Code].....

View 2 Replies View Related

Fedora :: Install The Plugin For Firefox ?

Jul 30, 2011

I'm running F15 KDE version i've installed java, but how do I install the plugin for firefox?

View 4 Replies View Related

Ubuntu Multimedia :: How To Install WMP Plugin

Feb 11, 2010

A question from a true beginner - I want to watch clips but in order to do that i need WMP plugin - a popup with 3 additional plugins appeared, I chose 1 of them not knowing which is the right one... no success. I hoped to see the other 2 on next boot up but to no avail.

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved