I have got a nagios server running on my network, The configuration seems to be okay but each time there is a service alert notification, and an e-mail is sent to the contact group, Nagios continuously sends e-mail over and over again. Do anyone know of a way to set Nagios directives to only send one e-mail per alert without it flooding mail boxes.
View 3 RepliesI have nagios server 3.2 and it works fine.I want to know, how know can i send mail notification by alert type?
Or example
How can i achieve this type of notification? Is it possible or not?
script to send the swap is running out of requirement an alert to mail?
View 1 Replies View RelatedIt does not send mail if I only add contact_groups in host definition.
Code:
define host{
use generic-host ; Inherit default values from a template
host_name NAME1 ; The name we're giving to this switch
address XX.X.X.X ; IP address of the switch
[Code]....
I had configured sendmail on linux 5.2, Iam using public ip and my domain is registered[linuxforfreshers.info]. I am facing a issue that when I mail with the user sumit@linuxforfreshers.info then I am able to do it. But if somebody tries to send mail to the same user then it bounce backs. I had made the entry of domain in /etc/mail/local-host-name and also I put ok in /etc/mail/access.The mails are working properly with in LAN. But not able to work on WAN only I can send mail but not able to recieve mail.What else I need to do.
View 6 Replies View RelatedHow to configure a Debian mail server as a user send a mail with attachment maximum wight is 5 Mb.
View 3 Replies View RelatedI'm running a Debian LAMP server and I am adding postfix. The initial config is working and I can send and receive mail both locally and over the WAN. The problem is that I cannot get mail delivered to the user's home directory using Maildir/. I have set the:home_mailbox = Maildir/ parameter in main.cf but mail still goes to /var/mail after Postfix reload. The system is now using Maildir/ instead of mbox but in /var/mail. I really want to get mail into the user's home directory.
View 6 Replies View RelatedI have configured fetchmail, sendmail/postfix and mutt to act as a relay to receive mail. I can receive mail fine but I cannot send mail. Its working fine on my one box but on the one acting as a nat I am having issues. This is my mail log from the nat box.
Feb 25 03:42:25 TrunkmonkeyNat sendmail[4382]: p1P8gPfd004382: from=root, size=52, class=0, nrcpts=1, msgid=<201102250842.p1P8gPfd004382@localhost.localdomain>, relay=root@localhost
Feb 25 03:42:25 TrunkmonkeyNat sendmail[4383]: p1P8gPgn004383: from=<root@localhost.localdomain>, size=353, class=0, nrcpts=1, msgid=<201102250842.p1P8gPfd004382@localhost.localdomain>, proto=ESMTP, daemon=MTA, relay=localhost [127.0.0.1]
[Code]....
Ubuntu 10.04. I want to change the startup sound and the mail alert sound (incoming mail) for Evolution Mail Client. I go to System > Preferences > Sound, and all I get are themes preset. I do not have option to browse to wav files. I also do not see a browse option in Email Settings. Do I have to change an actual file?
View 7 Replies View RelatedI use Evolution mail and use 2 PCs When I send mail it saves it to my current PC but not to the other PC so instead i want it to save the sent to the email server i'm using.
View 3 Replies View RelatedI have set up postfix and dovecot as per the Ubuntu anual and appear to have a functioning mail server.Using the sendmail command I can send mail and I receive mail in ~/Maildir. Using Thunderbird I can read any mails received but I can't send any mail from Thunderbird. I have tried with both STARTTLS and SSL/TLS and whilst I get the prompt for a password I keep getting the message my password for my server is wrong.I have ports 25, 465, 587 and 993. Is that all the right ports?When I ping my domain name it resolves to my router name whereas I believe it should resolve to my IP. Could there be a problem with my host file? I've had a play but to no avail.Here's the error in mail.log.
Code:
westwood@westwood-desktop:/etc$ tailf /var/log/mail.log
Jun 1 19:00:33 westwood-desktop postfix/smtpd[2376]: warning: localhost.localdomain[127.0.0.1]: SASL LOGIN
[code]....
this is my code at the moment
PHP Code: <?php
if (isset($_REQUEST['email'])) && $_REQUEST['email']!='0'{
$to = "chrisathisemail";
[code]....
i want to send mail from unix mail command to my yahoo-id with attachment, but i want to receive it as attachment.
View 1 Replies View RelatedI'm running SUSE linux Server version 11. I want to configure mail server with postfix & cyrus-imap. For that, i have read many documents in Internet by i met issues. I'm running DNS in this server & it's ok Now I cannont send mail through command line.
[Code]....
I set up my mail server using the guide here: [URL] I am able to receive mail, I can send mail locally, but I can't send to external addresses. This is in my mail.log: Quote: Jun 30 14:40:43 Server postfix/smtp[10725]: 2FD9322015BF: to=<myemail@gmail.com>, relay=none, delay=1634, delays=1484/0.02/150/0, dsn=4.4.1, status=deferred (connect to alt4.gmail-smtp-in.l.google.com[74.125.65.27]:25: Connection timed out)
This is my main.cf:
[Code]...
i have an server which have my site on it, server have an public ip and site works fine..the thing that i done to enable mail server is :
1.select sendmail option as mail server(in joomla).
2.install and configure sendmail in server (which ubuntu installed on it )
**if i use my website locally mail server works fine i can send message and receive , but when i use web site from Internet mail server seems not working at all
i basically had this system installed for our mail system.The setup is as follows:
1. Operating system installed is Debian ver. 5.0.3
2. Roundcube is installed as a webmail(if its right for me to say that)
3. The server is hosted right here at our offices
4.The server uses relay system to send mail i.e. relays all our mails to our ISP
That all i can say about the configurations becuase thats as much as i understand it.The problem now is that we are not able to send or recieve emails from both internal and external.I tried to send mail to a collegue in the office who is on our local LAN,Roundcube says sent successfully but the person does not recieve the mail.i tried to send to my yahoo address but nothing.I dont know where these mails have been trapped.
I am trying to do something really simple with Exim. I have two machine connected together via a hub. They can ping each other. They each are running openSuse 11.2 and have Exim installed. On each machine from the command line in start Exim as a daemon by typing: sudo /usr/sbin/exim -bd -d and each machine runs through some output and sits there "Listening". Then on either machine I try to send a mail message of the form mail
(or mailx) <user>@<other node>
some text
EOT
and absolutly nothing happens! I must be doing something wrong or daft which is very basic, but I have searched all over and cannot get it to work.
Was told that I need to use Javamail for a project to send mail rather than using "mail" or "mailx". Has anyone here done this?Any pointers or sites you've used and can recommend?
View 1 Replies View Relatedi'm trying to send a mail with "mail" on my cent os console , but without success. In Suse it's quite simple with "mail": mail -r sendersaddress@domain -s "subject" targetaddress@domain </tmp/filewithcontent
View 6 Replies View RelatedI have been able to use the mail program on my old Ubuntu instasll which I found quite handy. However, it isn't functioning "out of the box" like I expected. I've tried to configure it as mail was in Ubuntu to no avail.
View 4 Replies View RelatedI have a bit of problem setting up sendmail on my server. I've gotten so far that I can send mail from my mail server and relay mail from my LAN computers through it. Also, local delivery seems to be working.The problem is receiving mail from other domains. When I send mail from my gmail account to any user in my domain the mail gets delivered back to gmail as it exceeds the max hop count.The mail gets bounced between my ISP mailserver which I use as smart host and between my server.The problem seems to be that my mail server won't accept any mail it is supposed to receive.
View 8 Replies View RelatedI have searched for at least 1h for this to find but I didn't found anywhere how can I do to check for large email mail boxes. I run qmail as mail service
View 5 Replies View RelatedI am trying to send e-mail from command line by using "mail" in fedora. It goes to e-mail server in the same network but it is refused by other outside this network with message: "..... Connection refused by name@yahoo.com ......
View 1 Replies View RelatedThere is an requirement, intranet people they may not have internet access but they want to send mail to external domain(internet),but in that intranet network one machine can have internet access. Is there any solution for this requirement.
View 2 Replies View RelatedI m not able to configure sntp server at my linux distribution.
Here are the details. Defined the mail server here.
Code:
/etc/mail/sendmail.mc
dnl define(`SMART_HOST', `XXX.XX.XX.XXX')dnl
ran this command.
[Code]...
As per OpenNMS wiki documents, I configured everything for email notification of alarms. I am able to view notification under notifications, but I haven�t seen any mail alerts forwarded to recipient mail ID. Below are configuration files. Please review and suggest the required settings/actions. SMTP Server Details: SMTP Relay Server, OS: Linux
i also made the configuartion by opennms configuration material in opennms.org i edit the following conf file
1. javamail-configuration.properties file
[code]....
ut back the audio alert for new mail in Evolution. It dropped out an update or two ago.
View 2 Replies View RelatedI use gmail for all of my emailing needs but stumbled upon linux counter at counter.li.org. Now I registered on the site and downloaded the machine-update script from the site. So I ran it and it collected the required data. But when I run ./machine-update -m as they have told, I guess no mail gets sent as I have to configure the mail program. How do I configure it so that it sends mail from my gmail address using stmp?
View 1 Replies View Relatedso I'm really new to using Linux, and I searched the forums, but most people seem to have trouble sending mail, not receiving it. When I send mail from the CLI, it gets delivered fine (from travis@travishoward.net) But when I try to reply or mail to the server, I get this message back:
Code:
----- The following addresses had permanent fatal errors ----- <travis@travishoward.net>
(reason: 554 5.7.1 <travis@travishoward.net>: Relay access denied)
[code]...