i'm currently using the claws mail rssyl plugin to manage my rss feeds, but i have two issues with it:
1) when i delete an rss item it reappears when i refresh the feed
2) when i mark all posts of a feed as read, a little while later (for example) 5 of the 20 items become new/unread again. these unread items are random (not the latest posts)
the only pattern i can see (regarding issue #2) is that it only affects feeds hosted on videos. i'm thinking of finding a different application to manage my rss feeds, but it is nice to have email and feeds in once place.
I'm trying to install the plug-in Gtkhtml2Viewer on my Debian Lenny system for claws-mail. I have installed claws-mail 3.7.5 from backports. When I try to install the plug-in, I get the following response:
Code: mark@debian:~/stuff/debs/source/gtkhtml2_viewer-0.27$ ./configure [..] checking for GNU gettext in libc... yes checking whether to use NLS... yes checking where the gettext function comes from... libc checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for CLAWS_MAIL... configure: error: Package requirements (claws-mail >= 3.4.0.1) were not met:
No package 'claws-mail' found. Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables CLAWS_MAIL_CFLAGS and CLAWS_MAIL_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details.
mark@debian:~/stuff/debs/source/gtkhtml2_viewer-0.27$ Since I have version 3.7.5, I would think that the above cited requirement of "claws-mail >= 3.4.0.1" would be met. However, for some reason, it states that "No package 'claws-mail' found", which is strange.
I have been trying to install the plug-in vcalendar for claws-mail. I use Debian Lenny, and I have installed claws-mail 3.7.5 from backports. I tried installing the plug-in, but get the following response:
Code: mark@debian:~/stuff/debs/source/vcalendar-2.0.8$ ./configure [..] checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for CLAWS_MAIL... configure: error: Package requirements (claws-mail >= 3.6.1.27) were not met:
No package 'claws-mail' found Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables CLAWS_MAIL_CFLAGS and CLAWS_MAIL_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details. mark@debian:~/stuff/debs/source/vcalendar-2.0.8$ I'm not sure why it didn't find ANY package of claws-mail. Further, 3.7.5 should be good enough, since it is newer than the required 3.6.1.27.
I have the newest ubuntu version (64Bit) with claws mail 3.7.4. When I click: Configuration->Plugins->Load And select the python plugin, claws crashes as soon as I clock ok.
I am suddenly experiencing problems with disappearing e-mails in Claws Mail. They seem to disappear somehow during the download process. Running Claws Mail from the terminal gives me the following errors, but I am not sure that this is related to the problems with my other accounts:
Code: ** (claws-mail:12020): WARNING **: [11:45:58] IMAP error on imap.gmail.com: STATUS error ** (claws-mail:12020): WARNING **: [11:45:59] IMAP error on imap.gmail.com: STATUS error ** (claws-mail:12020): WARNING **: [11:46:00] IMAP error on imap.gmail.com: STATUS error
I am using Claws Mail version 3.7.4 with Linux Mint 9 (LXDE). I have googled a lot, but I haven't been able to come up with a satisfactory answer. It may have something to do with some upgraded gnu utilities, but I am not sure what this is in reference to. BTW, all of my accounts use IMAP.
I can't encrypt my e-mails in Claws Mail (3.7.8, slackbuilds.org) on my Slackware 13.1 system. I have the PGP/Core and PGP/MIME plugins loaded. I can verify the signatures of incoming messages and sign outgoing messages, but not encrypt them. Even though there is only one key associated to the recipient's email, Claws can't find it and the "Select Key" dialog displays an empty list of keys.
I just started using suse, so a few questions claws-mail 3.7.5, I have no print capabilities, there is no print icon showing, also the spam filter is greyed out. I have loaded bogofilter, but I noticed the amount of rpms listed is much less than my last distro, including the advanced filtering. Are these rpms on another repo somewhere.
I had claws mail 3.7.6 installed with mint 10 and all was well. I use gmail with ssl and was no problem. I wanted to download some add-ons for claws, but most were only compatible with version 3.7.8, so I downloaded and installed 3.7.8 only to find that it doesn't support ssl connection, so I can't use it for my gmail account.
Until the latest update to php, claws-mail was running fine. Since updating php through slackpkg, Claws will start but as soon as a message is selected it crashes with the following message (caught in terminal)
root[/]# claws-mail Newmail plugin loaded Message header summaries written to /home/pat/Mail/NewLog Segmentation fault root[/]#
I just upgraded from fc11 to fc12 with a great deal of trouble...finally am partially functional. The problem really bugging me is the missing claws-mail toolbar that shows "tools", addressbook, encrypt/decrypt, and especially the ability to load plugins, and set all preferences. I have tried uninstalling & reinstalling but nothing provides the toolbar I need. Yum does not provide anything new either. As most of my important passwords are encrypted, and I need the claws pgp plugin to be loaded.
I am using Claws Mail version 3.7.3 on Ubuntu 9.10. In the last few days, replies that I receive often have the original (quoted) text replaced with an ellipsis [ ... ]. For example, I see: Where the ellipsis is a hyperlink (?), that when double-clicked displays the remainder of the message, as Claws had normally been doing: If I forward the message, everything is included / shown, as expected. It's very annoying to have this program suddenly start behaving this way: When I receive / read a reply, I want to see the entire message ('thread') displayed, not this [... ] ellipsis (hidden original message(s)).
Trying to transfer to claws mail from kmail, I have problem in sending emails: It doesn't send email through one of my accounts (a university account) and says: An "error happened during SMTP session". My other university account works!
I've got a problem with the Claws-mail client. Couple of days ago I have updated the client to its newest version 3.7.8. Because I couldn't find a ready-made package for Slackware 13.0 I've downloaded the source, unpacked to a folder and using src2slack created a package. Package has been created using default settings. And when done upgraded as it should be with upgradepkg. And it was very nice until I've noticed that Claws didn't load into the tray.
Went into plugin loading screen and saw that the trayicon plugin isn't loaded. This one is easy I thought and loaded the plugin. And then it happened. The plugin didn't load but instead it spit out this message: "The following error occurred while loading Trayicon.so : /usr/lib/claws-mail/plugins/trayicon.so: undefined symbol: gtk_status_icon_set_title". I've found what this symbol should do (or so I think) but it doesn't get me anywhere. I would really like to drop claws into the tray.
I've tried this several times and cannot get claws-mail to run. Libetpan has been installed, removed and re-installed. When trying to start c-mail it say cannot find libetpan.so.13 which is accurate - the current installation of libetpan puts in libetpan.so.15. These packages all come from slackbuilds (have also tried Alien's package wtih the same results). This a standard 13.1 install with regular updates through slackpkg.
I haven't logged on to Fedora for a few days, but I did this morning and opened claws mail and clicked 'get mail' and it proceeded to download new messages. However, when I clicked on the inbox folder, the email count changed to zero! No email. I checked and found the folderlist.xml has the correct Mail folder location, and when I went to that location, (on a shared data partition) indeed the 'inbox' folder was EMPTY. No files at all. I'd had a similar issue once, but the email #MH location wasn't correct, so when I fixed it, the email appeared. I did a web search and a search of the claws bugzilla.
The closest I came was a message about the cache not keeping accurate information. There was a claws-mail update at the end of May, but it had been working fine since then up until now. And, it's possible it's some sort of Fedora issue (?), because I had opened my 'home' folder on my desktop to check the claws folder, and now I see that there's a gaping hole on my desktop where that folder should be. I can get there by clicking 'places' and 'Home Folder'. Any other reports of disappearing folders and email?
I recently decided to switch back to a stand alone email client from gmail. I started with thunderbird, which had a very intuitive user interface and was working fairly well, except for the fact that when it wasn't supposed to be doing anything, it was taking up about 40% of my CPU (this is after it had downloaded all the emails, so there really wasn't anything that needed that much cpu usage from my perspective). After investigating that a bit, I decided I'm going to go for something lighter, and now I'm trying to claws-mail. This one is fast and quick, with very little bells and whistle, and I think it has the potential of keeping me happy.
However, there are few things that I can't figure out how to do. The two main ones right now are: How do I make it download all the emails in at least the inbox folder? I'm using imap protocol with gmail, and I'm happy that the two mailboxes are very well synced, however the only thing it is downloaded by default is the email header, and not the content. I would like to be able to download the content immediately, so I can read the email offline as well. How can I set up GPG to sign my emails automatically? In claws-mail to sign my emails, I need to go to the Options->Privacy Options->PGP Mime, followed by Options->Sign. Is it possible to make this the default option?
I want to change the polling order of my two email accounts, but I can't figure it out. I have two IMAP accounts in Claws-Mail, one for work and one for 'other'. The work account is set as default. It is uppermost in the left pane. It is marked 'MH', which I think is to do with storage of the downloaded emails. Claws-Mail always polls my 'other' account first. This takes ages and prevents me getting my work email. How can I make sure the work account is polled first?
I'm using Evolution, latest version for Linux. For some reason, I can't get the deleted items folder in the mail view to expunge. Is there some reason why emptying the trash suddenly doesn't work? It worked for the first few days of using Evolution, but now it just doesn't work -- the deleted items just stay there.
Here's the error message: Error storing '~/.evolution/mail/local/Handle Later (mbox)': Error storing '~/.evolution/mail/local/Sent (mbox)': Error storing '~/.evolution/mail/local/Inbox (mbox)': Summary and folder mismatch, even after a sync
I have somehow managed to eradicate all of my films and music...I was going to update my external HDD (typical) and so I highlighted everything and went to drag it. My finger kind of slipped while the cursor was in the the same folder and I got a message saying something like:"Source file is in this destination. Cannot move. Do what?"There's me thinking not much can go wrong at this point so I clicked "Skip all".Everything disappeared
The file system says there's still only 500GB free on my 1.5TB, so the files are there but I just can't see them.how I can get them back?There's nothing in my 'Deleted Items' and I had a play with scalpel and PhotoRec and I either couldn't get them to work or they said they'd take way more time than I have.
Edit: Where did that smiling devil come from? That's really not how I feel right now.
In my frustration to get adobe flash working in firefox I deleted the /usr/lib/flash-plugin folder. Now when I try to uninstall "Flash-Plugin" from YAST it fails as it can't find the sub-folder. I also cannot install the latest version of flash player as it says that it is already installed - So I am stuck in a loop.
I am running SUSE 11.2.
Is there a config file of installed programs that I can modify to remove the "Flash-Plugin" entry, or is there another way to get over this problem.
I was playing around with the default panel that has the power icon (wrong lingo maybe) and the network/sound icons, etc.I deleted some items including the power icon and now for the life of me can't find it in the panel applets list in lubuntu.Is there a way to restore the default panel with the settings as when I first installed lubuntu.I also played with some spacings and other settings so would rather just get it back to normal/restore it vs add all the items back on and then play with the spacings again.
I installed the xfce4-quicklauncher plugin from a tar file in Slackware 13.37. It is showing as installed in gslapt, but it is not showing in the xfce panel's "Add New Items" menu. (see attached images) I tried rebooting and a few google searches. What must I do to get the xfce4-quicklauncher plug-in to appear in the xfce panel's "add New Items" menu?
Just set up Evolution to get my emails from 1and1.co.uk and hotmail. I ticked the box 'leave on server'.Whilst in the mess of trying to configure two email accounts (using rules and folders), I deleted all my 1and1 emails locally. They remain on the server, but I want them now in my client inbox and Evolution seems to ignore those emails. Is there any way I can refresh evolution, so that it doesn't treat these emails any differently to new ones that I retrieve?
I just finished setting up Evolution Mail. All my e-mails have been downloaded and it's working good.But then I logged in at mail.live.com and I all my mails were gone!I don't want my mails to store in my PC, no one knows when my hard drive will die or when will I do something stupid that leads to the complete anihilation of all my e-mails. I want them back to Windows Live's mail server.
I was playing around and by mistake I deleted the Chat and Mail panels which are default on the launchpad or whatever the top bar is called (where by default the date and power options/buttons appear). I want to bring it back.
Is there an option in Evolution to return to the Inbox view after you delete a message, rather than going on to the next message? I cannot find it anywhere.Incidentally, this same question is one of the zero-reply questions: URL...I wonder if this means there is no such feature in Evolution and I should submit some kind of "feature request" at their development site.
I've installed Fedora 13 with XFCE as the desktop environment. When I login from the GDM, the screen goes black for a bit, then it just switches back to the login screen. I've booted into runlevel 3 and logged in, but I'm not sure where to look now.
I am new to this forum. Today morning I installed "skim" program which i used for chinese input. when my sytem was restarted for the second time, it went inside but the GUI login screen reappears even after giving the correct password!
I'm using OpenWRT on a WRT54GS. I'm using wifidog in combination with openvpn. For those of you familiar with wifidog, my auth server is located at the other end of an openvpn tunnel and the "wifi dog gateway" is running on the WRT itself. I'm don't really think that wifi dog is the issue. Basically, I'm using openvpn with the "redirect-gateway" option which works well. In this mode, openvpn removes my current default gateway setting and adds the remote openvpn server as the default gateway (as it should). However, overnight, my default gateway on the local network keeps reapperaing (along with the openvpn one as well).
This causes confusion and I don't want any packets (But ovbiously the connection to the actual openvpn server) to go down this local gateway. Why do you think it reappears? Do you reckon openvpn is dropping connection and somehow the normal gateway is being added back? I *could* run a cron script which runs every minute or so with something like "route del default gw xx.xx.xx.xx" (where xx.xx.xx.xx is the default gateway which I don't want to be there) but that is quite messy and means that if I were to ever move the router I would need to reconfigure this and considering that I would like in the future to have many of these wifi dog gateways, this really isn't an ideal option (as every network will have a different default gateway).
