This message was created automatically by mail delivery software. A message that you sent could not be delivered to one or more of its recipients. This is a permanent error. The following address(es) failed:
xx@xx.com
SMTP error from remote mail server after initial connection: host [URL] [ip address]: 550 Access denied...
This message was created automatically by mail delivery software. A message that you sent could not be delivered to one or more of its recipients. This is a permanent error. The following address(es) failed: xx@xx.com SMTP error from remote mail server after initial connection: host [URL] [ip address]: 50 Access denied...
View 4 Replies View Relatedm using atmailserver which i have configured it as relay server for another domain, the problem arose sometimie when they are sending mails, the mails bouncing with the below error;my server is [URL]
----- The following addresses had permanent fatal errors -----
< Muu@zac.com>
----- Transcript of session follows -----
.. while talking to [URL]
>>> DATA
<<< 550-Virus Phishing.Heuristics.Email.SpoofedDomain detected. Mail delivery
550 avoided.
i had configured mail server in linux. i had configured sendmail in linux client . i have error while sending mail through thunderbird smtp auth error how can i resolv the issue .....
View 1 Replies View RelatedI have configured mail server with postfix with dovecot with no encryption:
When connecting with Thunderbird imap is working fine. When sending email from another domain to this domain again it is fine. But when I want to send mail from my domain to another it gives me error and this is /var/log/maillog:
Quote:Jan 18 18:23:09 srv1 postfix/smtpd[3991]: NOQUEUE: reject: RCPT from unknown[95.81.67.120]: 554 5.7.1 <Recipient email>: Relay access denied; from=<Sender> to=<Recipient email> proto=ESMTP helo=<[127.0.0.1]>
my server is Redhat as 5 + postfix +Dovecot .when i use smtp to send mail，it can't to send,the system return "relay access denied" ? This is my maini.cf
Code:
# Global Postfix configuration file. This file lists only a subset
# of all parameters. For the syntax, and for a complete parameter
# list, see the postconf(5) manual page (command: "man 5 postconf").
#
# For common configuration examples, see BASIC_CONFIGURATION_README
[Code].....
I am able to telnet to the server via a remote connection, but for some reason, it will not accept mail. ere is the bounce back email I am getting.Quote:This is the mail system at host smtp.mydomain.net.I'm sorry to have to inform you that your message could notbe delivered to one or more recipients. It's attached below.For further assistance, please send mail to postmaster.If you do so, please include this problem report. You candelete your own text from the attached returned message.The mail system
<root@mydomain.net>: temporary failure. Command output: pipe: fatal: pipe_command:
execvp /usr/bin/perlbin/vendor/spamc: No such file or directory
Reporting-MTA: dns; smtp.mydomain.net
[code]....
my postfix to send and recive external emails, but many recive in trash folder.Other programer say me that is need some configurations in postfix with and dovecot to work, but i dont know what!This is my first time configuring a linux server at this week.
my main.conf
sample_directory = /usr/share/doc/postfix-2.3.3/samples
readme_directory = /usr/share/doc/postfix-2.3.3/README_FILES
[code]...
I come back to everybody cause I don't find an explicit how to do this!In our internal network, I've created an email server with Postfix and Dovecot. (Just for internal domain, no needed to go outside)
But I've some server which use linux too. All are on CentOS 5.5.I would like to configure these servers to use my internal mail server for send email, and not configure sendmail or postfix on each server.
What I've to do exactly on each servers to use it? I search on the web but I don't find something very explicit
I have the following config with Postfix:
Quote:
But it keeps coming up with:
Quote:
Is there any reason from these configs as to why this should be occuring?
This was the guided step by step tutorial I followed: [url]
We have one major problem in our dedicated online mail server. In this mail server both sendmail and qmail running for send and receive mails. In this server I can able to send mail to other domain like Gmail and yahoo its works fine. But I am not receiving any mails from other domains. And automatically I got telnet localhost 25 connections refused error. When I send mail from my webmail I got like this error Connection refused Server replied: 111 can't open SMTP stream. This is I got when I send mail from webmail. I am using centos 5.2 version.
View 2 Replies View RelatedInstalling PHPMailer v.5 (server running php5) with SMTP function. I have installed the main files in mail directory such as: # class.phpmailer.php: This is the main class file which contains the various email functions.# class.smtp.php: This additional class allows SMTP authentication.I don't think I need class.pop3.php as I'm sending mails server side (smtp)and should be accepted by most IP's pop3 servers.
All my mail functions work great with SMTP and I can send and receive. My problem is that my recipients only receive mail from admin@domain instead of "My Website Name" Sounds simple enough, I know and I have made adjustments to class.phpmailer.php and have inserted my specific mail attributes for my site such as mail address, mail from, smtp server, user/pass for smtp,etc.PHP Mailer v5.0 class.phpmailer.php is a very long script and I only found a couple of places to put the FROM address as follows:
PROPERTIES,
PUBLIC
/////////////////////////////////////////////////
/**
*
Email priority (1 = High, 3 = Normal, 5 = low).
[code]....
I'd like to have anything that tries to send mail locally on my machine (including crontab reports for instance) to be handled by my ISP's smtp server instead of my machine acting like it's own SMTP server. I've spent around 15 hours trying to figure out how to do this and I keep either getting into things that I don't understand, or hitting brick walls (for instance, I found nullmailer, but after installing it, it seemed like it would only work on Unix) Is there an application like nullmailer which I can use as my MTA to forward all internal mail to a different SMTP?
View 3 Replies View RelatedI tried setting up evolution mail incoming worked fine outgoing Big No, so I install Thunderbird and it worked like a charm. Then I decided I liked Evolution a little more and wanted to see if I could get it working and came across this. Firstly I entered all my details correctly double and triple checked. Look at my user name now when i try sending an email I get this? Why has my email changed?
View 5 Replies View RelatedI'm trying to set up my postfix server to relay mail (via a php cms) using Gmail's smtp on my account, but for some reason, Gmail returns an error code that StartTLS must be sent first, my postfix main.cnf file can be found at pastebin, because of this forum's text length I cannot paste my postfix main.cnf file as can be seen I have everything set and configured for Gmail, but postfix (for some unseen reason) can not send StartTLS. [URL].
View 4 Replies View RelatedHere is the senario...
2 round robin dns servers
x.x.x.1 mydomain.com (hostname)
x.x.x.2 mydomain.com (hostname)
My problem is that when I try and send an email that is part of the domain, it ends up trying to deliver it locally. I realize it is supposed to, but I don't want that for non-users of the server.
I want to be able to deliver certain emails []@mydomain.com remotely. (info@mydomain.com)
exim4 setup "internet site; mail is sent and received directly using SMTP". This works well as long as it is not an email from mydomain.com.
Is there a way to have exim check the users first and then deliver based on local user or not?
Next question. Is having the domain name as the hostname the best way to setup a round robin? (web server)
I have a problem relate to posttfix.I want to mirgare postfix mail server to exchange 2010 mail server but I can't do it,u can help me.You can show me have to do configure postfix and exchange how to?
View 1 Replies View RelatedCan this be done? A company is currently running a postfix mail server. They got a new server and, while the users are migrated, they need to have the messages delivered on BOTH servers.
I thought it could be easily done in postfix: deliver locally AND forward mail to new server, but all solutions I found would deliver the messages in just ONE place.
How to communicate with an SMTP server with telnet, in order to send a mail?
telnet smtp.something.somewhere 53 Trying
10.xxx.xxx.xxx...
Connected to smtp.something.somewhere.
Escape character is '^]'.
And that is as far as I got. What do I have to do after?
What do I have to write after "HELO"?
I am setting up a CentOS box as a NAT firewall that needs to also send mail. It needs to send this mail using an outside provider's SMTP. The provider requires SMTP over SSL. None of the machines inside the NAT will ever send mail except via the provider's SMTP nor will they ever receive mail except to local clients via the provider's IMAP servers.
So for the example the machine is TESTMACHINE. There is one internet facing ethernet port connected to a DSL modem via pppoe.
The SMTP it needs to send mail via is mail.host.net which requires SMTP over SSL (port 465) and username/password authentication.
The sendmail documentation is quite confusing on how to get this simple setup operating, so an example showing the appropriate changes to sendmail.mc and other require config files.
I've been having this problem since 10.6 released, but have until now been successful with the "just use Thunderbird" response. My sendmail server hasn't been changed, but as clients upgrade from OSX 10.5 to 10.6 suddenly mail.app will no longer connects to send SMTP messages through the server. (IMAP connections to the same server using the same user/pass combinations work perfectly) When I look at the logs, things basically stop right after the STARTTLS command.
Google indicates alot of people are having similar problems, but I'm not seeing any solutions. Do any of you administrate sendmail servers where some of your clients are using Apple's Mail.app on Snow Leopard, and if so what settings are you using? At this point, I'm happy to make changes to the server to accommodate Apple's issue, I have too many Mac users connecting to my server. I just can't figure out what to change. I've enabled virtually every possible login authentication combination, and none of them work.
How do I make a local mail server that itself is a client to a WAN mail server.I want the local mail server to query new mail every 30 minutes from the WAN server.
View 6 Replies View RelatedThere is an requirement, intranet people they may not have internet access but they want to send mail to external domain(internet),but in that intranet network one machine can have internet access. Is there any solution for this requirement.
View 2 Replies View RelatedI've setup my server by following a ton of goods, and it seems to work ok, but I need to start using my server for email in order to receive orders placed via my website. I've followed this guide - [URL] I followed the steps above, and tested the mail server via telnet, and all seemed to be ok. I tried sending an email via Squirrelmail, from cs@thinclientwarehouse.co.uk TO my working email simon@c1systems.co.uk, but the server returned with the following message:
<simon@c1systems.co.uk>: host mail.c1systems.co.uk[95.128.128.129] said: 550-Verification failed for <cs@localhost.thinclientwarehouse.co.uk> 550-The mail server could not deliver mail to cs@localhost.thinclientwarehouse.co.uk. The account or domain may not exist, they may be blacklisted, or missing the proper dns entries. 550 Sender verify failed (in reply to RCPT TO command)
This is the current setup that we have: We have approx 20 clients who pay us to send out a type of e-mail called an E-Blast to their customers. We currently are using 5 Microsoft Windows Virtual Servers to do this. The problem is that those machines are starting to break down. There are times that it will take Microsoft Windows approx 9-10 hours to complete 1 job. This is way too long. We want to move away from Microsoft Windows for this particular type of job as it seems there are more customers who are wanting to use this type of advertising.
It seems that using a Linux Server "Command Line or Shell" environment would be the best way to go as there is no GUI like Windows. Since there is just text...that is something that would/should process very, very quickly.
I am in the process of setting up a new SMTP outbound mail server. This is the current software & configuration (what is installed on this new machine):
All of the customer data (Names, E-Mail Addresses, etc that these e-mails are going to) are currently loaded in a Microsoft SQL Database.
My machine that I am using is plugged into the DMZ. I have 1 ip address for the 1 network card. I have also added/bound 4 more ip addresses to that network card.
I have configured Postfix for Multiple IP Addresses.
I can, from the command line, send successful test e-mails and receive them in my personal account.
As far as I know everything is setup correctly. I can and will post requested information so that it can be verified that everything is setup correctly.
Here are a couple of my questions:
Ensure that I have my Network / Interfaces file and my Postfix's Master.cf/Main.cf files setup correctly?
How can I setup this server to be an Outbound SMTP server and get it to use all 5 of the IP Addresses to send these e-mails quickly?
What can I use to check and ensure that this server is in fact sending out emails on all 5 IP
Addresses (I heard that there is a program named "Postal" that may help in determing this).
I have one Centos Server and I want to forward root mail to 1 external account: [URL] I installed sendmail and created /root/.forward with this content: [URL] and I sent a test mail with this command: /usr/sbin/sendmail root <prueba.txt But nothing was forwarded.
After that I ran the same command with the verbose option:
/usr/sbin/sendmail -v root <prueba.txt
And this is the output:
root... Connecting to [127.0.0.1] via relay...
220 localhost.localdomain ESMTP Sendmail 8.13.8/8.13.8; Wed, 3 Nov 2010 21:09:39 -0600
>>> EHLO localhost.localdomain
250-localhost.localdomain Hello myfriend [127.0.0.1], pleased to meet you
250-ENHANCEDSTATUSCODES
[code]....
For some reason sendmail tried to connect to example.com smtp server and couldn't reach it. I am sure this is because the smtp server for example.com domain is not example.com is mail.example.com. Besides mail.example.com requires authentication, username , password and the smtp port is not the default 25 is 9999. configure sendmail to forward root mail to a smtp server that requires authentication, username, password with a not the default 25 port?
I have installed Nagios 3 on CentOS 5.2. Everything is running. It is monitoring 10 machines and 60 services for now. Now I want email notifications for the critical alerts from Nagios. I am already having one mail server (Qmail) running on different machine and I want to use its reference to send alerts to my network.
View 6 Replies View RelatedI am running CentOS 5.5 and am trying to get Nagios to send out Emails.
After a bit of reading I have the following in my /etc/mail.rc file:
Code:
[root@linux ~]# cat /etc/mail.rc
set ask askcc append dot save crt
ignore Received Message-Id Resent-Message-Id Status Mail-From Return-Path Via
set smtp=172.29.1.76
You have new mail in /var/spool/mail/root
[root@linux ~]#
I have Nagios setup correctly and introduced an error to generate an Email but nothing has come through.I suppose I have two questions:
1. Is mail.rc setup correctly?
2. Can I test to see if mail.rc is working correctly?
Linux newbe, trying to setup mail. Imap no problem, SMTP keep getting connection refused. Credentials and login info to smtp server same as working on windows machine...
View 5 Replies View RelatedI have one server at home, connected through a router that gives me a static IP:192.168.1.2 - My PC192.168.1.3 - CentOS serverI enabled the port 80 into router forwarding system and I can connect properly to CentOS server, using the IP my internet provider gives me. My router automatically forwards a changed IP to my dyndns.com account so I can also access the server through a domain name (I pay to have it linked to one of my domains).My next step is to configure the mail server (dovecot) , so I can send emails from my local server(192.168.1.3).I was wondering if anyone has any tutorial links or tips to have the mail server configured through a home internet provider + home router.
View 5 Replies View Related