General :: Audio Device Detected But Do Not Hear Sound
Feb 15, 2011
When I run the audio configuration I get:
The following audio device was detected:
Vendor: nVidia
Model Coporation GF100 High Definition Audio Controller
Module snd-hda-intel
but I do not hear sound.
The ALSA driver version is 1.0.14rc3
Lib package is: 1.0.17.-1.e15
Utils package is: 1.0.17-1.e15
The sound log has:
class: AUDIO
bus: PCI
detached: 0
driver: snd-hda-intel
desc: "nVidia Corporation GF100 High Definition Audio Controller" .....
The audio configuration sound test and the answer to the question No returns a message that says: automatic detection of sound card did not work. I am not sure what else is needed to diagnose the problem.
View 8 Replies
ADVERTISEMENT
Jan 3, 2010
I am unable to hear any sound at all using my M-audio delta 44 soundcard (which works fine in Windows - Dual boot).how I can get this working?
View 4 Replies
View Related
Jun 12, 2010
Cannot hear any sound from the system
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: ALC268 Analog [ALC268 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: SB [HDA ATI SB], device 6: Si3054 Modem [Si3054 Modem]
Subdevices: 0/1
Subdevice #0: subdevice #0
View 3 Replies
View Related
May 27, 2010
I can't hear the music playing on my speakers, BUT i can hear the music playing in my headphones when i insert my headphones jack.
I have tried configuring aslamixer, tried configuring the sound devices but nothing seems to work. i have also installed a lot of music players such as asla player, audacity and so on. i also tried configuring the aslamixer from the terminal but it did's work as well.
I must add that i have linux ubuntu netbook remix 9.10 i386 installed and windows xp home edition sp3. In windows, i have no problem playing any sound. (I am new to linux <2 days> but very experimented with windows <17 years>).
View 1 Replies
View Related
Mar 5, 2011
How might i be able to play a small blip/beep sound to let me hear/test the audio levels upon volume change? Mac OSX users may know what I'm talking about. I had a similar application in windows. It helps me guage my volumes before i play games/...../videos.
View 3 Replies
View Related
Mar 11, 2010
For those that use Virtualbox on their slackware host and have a windows (xp) guest running. I have tried various settings for sound (Alsa, PulseAudio), the AC97 drivers are installed in the Windows xp guest os, but there is no sound and there is an unknown audio device (in the windows device manager). If I remove the AC97 drivers and use the soundblaster16 drivers in the Vbox settings there is no unknown sound device, but there's still no sound. why I can't get sound working?
View 13 Replies
View Related
Feb 8, 2010
I am new to Linux and after a lot of research I settled on CentOS to be my OS for Linux. But I am having trouble with sound right now as I can not play audio. The command system-config-soundcard opened a gui for audio configuration saying following device is detected - Intel Corp. 82801(ICH9 Family) HD Audio Controller.
Ouput for some commands are given below::
[root@localhost ~]# lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) .....
[root@localhost ~]# uname -r
2.6.18-164.el5
[root@localhost ~]# cat /etc/redhat-release
CentOS release 5.4 (Final)
Clicking on the volume icon gives me message that either Gstreamer plugins are not installed or sound card is not configured.
While Trying to install gstreamer using YUM, I got following message:
[root@localhost ~]# yum install gstreamer
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile .....
Setting up Install Process
Package gstreamer-0.10.20-3.el5.x86_64 already installed and latest version
Package gstreamer-0.10.20-3.el5.i386 already installed and latest version
Nothing to do
[root@localhost ~]#
So I guess gstreamer are installed but how to configure the sound card or is there any other problem.
View 9 Replies
View Related
Sep 26, 2010
I recently installed Ubuntu 10.10 AMD64 beta. After installing the flash player, everything worked fine. I installed a few updates, as well as Ubuntu Stuido from the synaptic package manager, and when I rebooted, I can't hear any sound from flash content displayed in Fire Fox. All other sounds work fine, and I made another user account as a test, and that account has full audio functionality, including flash...
View 5 Replies
View Related
Mar 16, 2010
I recently installed Arch Linux on an old desktop machine. Everything works well except the onboard audio isn't detected at all.
I am using the 2.6.32-ARCH kernel
My lspci output is:
Code:
# lspci
00:00.0 Host bridge: Silicon Integrated Systems [SiS] SiS645DX Host & Memory & AGP Controller
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP)
[Code]....
On another note, the manufacturer (ASUS) actually provides Linux audio drivers for my motherboard (model: P4S533). I attempted to install them, but the configuration process involves using make menuconfig, make xconfig, or make config to add the drivers to the kernel (I think) and I'm still a relatively new Linux user and had no clue what I was doing.
View 14 Replies
View Related
Jul 1, 2011
For those not familiar with the "motion" project it monitors your camera and when enough motion is detected in the video field of view it records that to a video file. The project website is here What I'm looking for is something like that but for audio, does anyone know of any Linux apps that can accomplish this?
View 1 Replies
View Related
Jul 13, 2010
I've installed a tv card but I can't hear the sound through my built-in CMedia soundcard when I watch tv with TVTime. The tv card's audio output is externally connected to my soundcard's line in input. In the 'Input' tab of the 'Sound Preferences' dialog, I can see the input level meter moving.
Audacity can record the tv sound, and I can hear it when I have the 'pass-through' option enabled, or when I play the recording.
I can play media files without a problem, and I can hear the system sounds.
But for some reason I can't get the tv sound to go through to the soundcard's output.
Obviously I've got the audio configured wrong, but I don't know what to do to fix it.
View 12 Replies
View Related
Apr 21, 2011
I have installed Skype 2.1 (Beta) in linuxmint Julia, now when I am communicating with anyone or video conferencing, I am able to hear the other person but the other person is unable to hear my voice, I talked with someone else who is facing the same problem in Ubuntu.
View 2 Replies
View Related
Jul 12, 2011
I can't hear my start up sound while starting my system?
View 1 Replies
View Related
Jul 14, 2010
Just when I thought my hardware configuring woes were put to an end, I don't have any sound. Here is my lspci list.
Code:
debian:~# lspci | grep Audio
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
And the aplay -l
Code:
debian:~# aplay -l
* List of PLAYBACK Hardware Devices *
card 0: Intel [HDA Intel], device 0: HDA Generic [HDA Generic]
Subdevices: 1/1
Subdevice #0: subdevice #0
View 14 Replies
View Related
Jun 5, 2011
I've got no sound. I'm not sure if I should post this in the hardware forum or not because i'm not completely sure that it might be hard ware. Here's the card that's in my laptop though. Raedon HD 4200 - RS880 Audio Device. And yes I made sure my sound was off mute.
View 7 Replies
View Related
Mar 27, 2010
i am using ubuntu studio karmic and i have a digitech vx400 audio effects pedal which serves as an audio in/out midi in/out device via usb. i can sucessfully set it as the system sound device in system>preferences>sound for both input and output. but, when i play audio through it it only works for a few minutes before the sound stops completely. if i leave the system settings set to the internal sound card and configure jack audio connection kit to go to the usb device, i get the same results on the usb sound. a few minutes of playback at the most.i can restart sound with either "pulseaudio --kill && pulseaudio --start" or "alsactl init" in either situation. just requires restarting the programs. same results after restarting. i think this is alsa related as i have both the system sound and jack using the alsa driver, but i don't truly understand the relationship between pulseaudio and alsa.
View 5 Replies
View Related
Mar 7, 2010
I just installed Ubuntu 9.04 on my laptop then immediately upgraded to Karmic 9.10. Pulseaudio installed by default. There's no sound although the mute button is not checked and the volume slide control is at medium. lspci gives:
00:14.2 Audio device: ATI Technologies IXP SB4x6 Hi Definition audio controller (rev01)
System >Preferences >Sound >Hardware tab: blank window "choose a device to configure" Output tab: "dummy" output stereo
So, it appears that somehow the audio device controller in my laptop is not recognized or its driver disabled, possibly by pulseaudio. Sound works fine in Windows 7 part of this dual-booted laptop.
View 9 Replies
View Related
Feb 5, 2010
I have a Dell Inspirion 5150. The onboard sound card was blown 3 years ago. OS is Ubuntu 8.10. I am also a HAM radio operator and use the computer for digital modes using a USB device that acts as an external sound card modem for me.
The program that I use for that is fldigi. The device is Signalink USB by Tigertronics. the device has the ability to have speakers plugged in to it. Question: Is there a way to have the computer send the audio out the USB cable to the device?
I have looked at my sound settings and there are USB devices but none of them are the one(s) that I use with my Signalink device. If it can't be done, no worries -- have not really needed it so far. Just something nice to have.
View 2 Replies
View Related
Jun 28, 2010
I have detected some problems when I try to record sound in my Kubuntu 10.04 system.
The problem is that the "default" device for audio recording does not work but I have to select another device to do so. I always selected the "default" device for audio recoding but currently I have to select hw:0,2 device.
Another odd thing is that different programs show me different device. For example, Audacity shows me that I have the following audio recording devices:
- HDA Intel: ALC888 Digital (hw:0,1)
- HDA Intel: ALC888 Analog (hw:0,2)
- spdif
- default
The only one that works is hw:0,2.
But arecord shows me (when I execute "arecord -L") the following:
Finally, in KDE system preferences for audio I get that I have 2 different audio devices for audio recording:
- HDA Intel (ALC888 Analog): it is said that it will try first x-phonon (CARD=0, DEV=0) and, if the latter does not work, it will try plughw (CARD=0, DEV=0)
- HDA Intel (ALC888 Digital): it is said that it will try first x-phonon (CARD=0, DEV=1) and, if the latter does not work, it will try plughw (CARD=0, DEV=1)
Where is the hw:0,2? and how can I set the alsa system to use hw:0,2 as the default device for audio recording?
All of that would not be a problem but I also have an ubuntu 9.04 installed on a virtual machine (by using virtualbox) and audio recording doesn't work there. I suppose that it is becase of the virtual sound card is using default devices for playing and recording audio.
I must say that audio playback works fine in both host and guest systems. It is just audio recording.
View 6 Replies
View Related
Apr 25, 2010
One issue that I'm having with Fedora that's stopping me from dropping Windows altogether is that I can't seem to get my audio in line to play directly to my speakers.
Basically, I've got my games console set up so that it uses the desktop computer's speakers as audio output, and is also plugged in to the same monitor and I can change the source depending on what I want to use it for.
I know the hardware works, as the whole thing works fine when using Windows (XP SP3), and I can still record from the audio in line using Fedora (so I can record me playing the game, then play it back and hear it through the speakers), but I've got no idea as to how to redirect the game sounds directly to the speakers.
Interestingly, every tutorial I've found so far suggests that the opposite should be the problem, and that the situation that I want to be in should be enabled by default. That said, I've been tinkering with the audio packages and whatnot long before I tried using the machine for gaming, so maybe I managed to inadvertently remove a package some time ago.
View 2 Replies
View Related
Jul 24, 2010
I have f13 installed in my system.My problem is ,i can hear sound thro' my desktop speakers but not with my audio headset. I have tried in many ways to fix it , by reinstalling pulse audio , installing ALSA etc But failed. In my system menu bar -- in preferences sub menu-- there is no " ADVANCED AUDIO CONTROL" available to edit sound output. similarly i am not able to use the mic of the headphone.
View 11 Replies
View Related
Sep 5, 2011
I put in a dvd and couldnt hear the first 3 minutes of one dvd, i put in a second dvd and could hear anything from it, how do i know what codecs to install to hear the audio? the video is viewable
I got an audio disc to play in kaffeine but not in amorok, in setting of amarok i hit the configure phonon and pick my audio device hit test and i can hear sounds.
View 9 Replies
View Related
Aug 4, 2011
Can't hear audio through headphones.
View 1 Replies
View Related
May 20, 2010
i installed opensuse10.2 on my lenovo machine.it is intel core2duo processor,hitachi hard disk ,1 GB ram , 1.80 GHz. in which i unable to hear audio . default audio driver installed on my machine is 82801G (ICH7 Family) High Definition Audio Controller and Driver snd-hda-intel . ply help how to hear audio on my machine
View 1 Replies
View Related
May 3, 2011
you have an onboard soundcard that you have or may not have disabled in the BIOS, and you intend to use headphones with a USB sound card with headphone and microphone jacks (or no mic jack, it doesn't matter), but you notice that the headphones are detected. Alsamixer provides an interface to control the volume, etc etc, but still the headphones do not work..In my case, the module snd_hda_intel was being loaded for my onboard soundcard that I had disabled in the BIOS before booting the computer for the first time, and even though I tried to "activate" the USB headset in alsamixer, I still couldn't get the headset to work.
Solution as a trial: Open a terminal, and look to the code section for what you need to type.A big missing key to my puzzle is how to simply restart and/or reload a module so that it isn't necessary to unplug and plug back in the USB device. Can't I just re-discover the USB devices? (or other such hardware, such as a PCI card, or otherwise inaccessible component?)
View 4 Replies
View Related
Jan 19, 2010
I Tried to play video files (.avi & .vob) in Kaffeine, but was unableo hear any audio. Then i went to the packmn site and installed the packageom there, with no positive results.After that i installed VLC and then tried playing.
View 2 Replies
View Related
Sep 26, 2010
Let assume that we have the following situation: we have a sound in the speaker systems or in earphones, maybe we play an audio CD, some mp3's or maybe a movie, etc.
All I know is that the sound goes through sound card to speaker system or in earphones, no matter the source.
How can I obtain the audio stream that I hear in speaker system or in earphones?
I would like to write an application that record and analyze the audio stream that I hear in my speaker system or in earphones. My OS is Ubuntu 10.04.
If you have a recommendation like "try to use ALSA", please provide more details like "in alsa-utils you have a class Class_Name, with the following function Funcation1, etc. Try to use the Function5 as in the following example".
View 1 Replies
View Related
May 28, 2010
I hear no sound with pulseaudio, but I hear the "ready for login" sound after the x server starts. OS: Ubuntu x86 10.04
[Code]....
View 4 Replies
View Related
Feb 4, 2010
Operating system : OpenSuse 11.2
Desktop environment : Xfce 4.6
Kernel : Default
All other CD's do get detected on the above mentioned platform on my laptop, but the 4 new Audio CD's I've brought do not get detected there.
By detection I mean:
i. No icon is shown on the desktop.
ii. ls -R /media/ shows nothing.
Those Audio CD's do get detected on a different laptop with OpenSuse 10.3 with Kde 3.5.7 on it !!
Kindly let me know if I need to give more information regarding the above problem.
View 8 Replies
View Related
Apr 23, 2009
I am new to using linux. i have installed gOS linux recently on my system. everything is working fine including the updates, videos and graphics but i cannot hear any sound. my pc configuration is intel dual coree 3.4 ghz, 3 gb ddr2 667 ram, intel 945 gcl (integrated sound driver by sigmatel), 160 gb 7200 rpm hard drive( seagate), nvidia 6600 LE 512 ddr2, creative 2.1. i have tried changing the default sound driver from intel hda alsa mixer which is the default as sound driver in the system to sigamel oss mixer but that proved to be of no use actually. i have also connected a few of my friend' pc s to my system to find out any problems if there is with the sound box but there isn't any.the speaker is just working fine with those systems. but when it comes to my own system i cannot hear any sound.
View 5 Replies
View Related
