I have FileZilla installed on this machine, and OpenSSH (with an open port 22) on another machine on my home network. When I try and connect, I get: Quote: Status:Connecting to 192.168.2.3... Response:fzSftp started Command: open "alphatwo@192.168.2.3" 22 Error:Connection refused Error:Could not connect to server
Which has left me puzzled as I have an open port. Does the username have to be defined somewhere? E.g. the machine acting as my SFTP server can be logged on to locally as alphatwo so that's what I logged in as (with the correct password). Is this correct? If so, does anyone have any ideas as to how I might rectify it? I want SFTP set up so I can copy PHP files from my laptop to /var/www/html/ on another PC (across the home network).
My problem is that the Mailserver in OpenSuse 11.1 (postfix, amavisd, spamassassin, clamAV en Razor) can not recieve e-mails, outgoing is ok. The problem started when I added 2 new users to de LDAP-server connected to Postfix.Some users can login, but most of them are getting the error: cant connect POP3 connection refused port 995.
I'm trying to connect with my server via telnet, but when i sent the command (telnet xxx.xxx.xxx.xxx Port) doesn't works and shows then follow error: Unable to connect to remote host: Connection refused, It happens with any port. Is strange but my telnet services works (telnet xxx.xxx.xxx.xxx), In addition, i tried with firewall enabled and disabled and the problem still happens. My centOS run on virtualbox.
I reinstalled unbuntu server recently and i am trying to get it to only allow one computer to accsess it. So after doing this etc/ssh/ sudo nano sshd_config I uncomment #ListenAddress 0.0.0.0 Ok so i am trying to accsess my server from a windows machine so i tpyed ipconfig /all to find my ip I found the IPV4 address and i put that address like so ListenAddress 192.168.1.22 But when i try and connect it says connection refused.
My system is Ubuntu 11Before I typed "telnet localhost" or "telnet localhost 23". I have make this work below:$sudo apt-get install xinetd$vim /etc/xinetd.conf
I am merely trying to change the port for my ssh server.However it isn't changing.I edited my ssh_config file to:
Code:
# This is the ssh client system-wide configuration file. See # ssh_config(5) for more information. This file provides defaults for[code]...
When i try to connect to my server via port 443 i get a connection refused error. However when i try to connect via port 22 it connects. Since that didn't work, i tried restarting the entire server.To restate, i changed the config file and restarted ssh then the computer, however the port didn't change.Ohh and yes my router is set to port forwarding on port 443, though it doesn't matter since I'm inside the network.
I have installed ssh in my system. i try connect some other system i am getting this error ssh root@192.168.7.140 ssh: connect to host 192.168.7.140 port 22: Connection refused
I now have a .tar.gz that has been created during my script, and finnaly i need to upload it via ftp to my computer, but i am unable to because i keep getting the "Connection refused" error, despite the fact that all the syntax appears to be right. in a bout of frustration, i have deleted the code and now no longer have what i had written.. so could someone please let me know the syntax to upload a file to a server? I am aware that other threads have been started about this issue but I am trying to ftp from an iPhone to a computer...
I'm trying to make an SSH script for my place of employment. This script, I want to go out to the server hostnames we have specified (in another file) and change a users account password. We use Kerberized telnet, so if telnet root hostname fails, I want it to use ssh username hostname and use the old password (specified). If both fail, I want it to ask the user what the port should be and input the port in the ssh command.
But I'm having a issue having it try telnet root hostname and if it fails then, try to ssh in, I have no clue how to have it proceed. Is it an if statement? Here's the telnet failed message: telnet: Unable to connect to remote host: Connection refused
I've used fetchmail for quite a while now and never had a problem, until (without having changed anything) today it suddenly quit working, giving me the error message:
fetchmail: connection to localhost:smtp [127.0.0.1/25] failed: Connection refused. fetchmail: SMTP connect to localhost failed fetchmail: SMTP transaction error while fetching from stefan%mydomain.com@mail.mydomain.com and delivering to SMTP host localhost fetchmail: Query status=10 (SMTP)
I googled the error message, but didn't find anything that look promising. I use ubuntu 10.4.
I am trying to backup a client called greetings.com, but when I do an amcheck on the server, I get: WARNING: greetings.com: selfcheck request failed: Connection refused
I am getting this error message on ktorrent on slackware 13.1 64. Few days ago I was using ktorrent for torrent downloads and it was fine, but not i can't star any download or any kind of torrent, it just keeps returning the error and it's not working at all.
I have a new Ubuntu server (10.10), named Denholm, recently installed and updated. I came in this morning, attempted to add a package with apt-get, and got a "Connection refused" response. I have another server (also 10.10), named Moss, on the same network that can connect successfully.
Here's what I've found/tried so far:
This doesn't look like and apt problem anyway, but the sources.list files on Denholm and Moss are identical.
I can ping [URL] (and other sites) successfully from Denholm.
I have tried 'wget www.google.com'. From Moss the wget is successful, but from Denholm I get "Connection refused."
I have a web server on Moss and Denholm can successfully access it.
To the best of my knowledge, Denholm is not configured to use a proxy server (no http_proxy variable set).
I researched a long while and could not find an answer to these problems, so here I am. I have a debian server running on my home network. I have it running LAMP and it has a live website.
I have samba running and share files with my windows 7 machine, so they do connect.
When i try to use putty it always refuses the connection.SQLyog tells me off too, but it only cays it cannot connect.
I was checking into SSH, since that is how they are both trying to connect, but I can not find adequate info online for my problem.
I have debian lenny running, I was pretty sure it has ssh running, but i couldnt locate 'sshd'
Is SSH on there by a different name or do I need to install the service.
(ps - getting samba running was a nightmare, but i think it was windoze fault, i tried setting up the debian machine exactly how the guides said to do, but it never could connect and denied passwords constantly, then the next day after a few windows reboots had happened, all of the sudden it worked. Don't know what the deal was there. Could that be instrumental? Sorry I am a web dev and not a networker so this stuff is not my forte.)
I cannot use GRsync from Ubuntu Desktop to PCLinuxOS laptop.The 2 computers can ping each other. I have disabled both firewalls. My laptop IP address is 192.168.1.11This is the error on Ubuntu Grsync:
ssh: connect to host 192.168.1.11 port 22: Connection refused rsync: connection unexpectedly closed (0 bytes received so far) [sender] rsync error: error in rsync protocol data stream (code 12) at io.c(601) [sender=3.0.7] Rsync process exit status: 12
On PCLinuxOS it wont say Ethernet is connected when trying a static address setup.However it does connect to the internet via auto Ethernet setup and a LAN cable. It then says connected. In order to use SSH and GRsync what programs are required? I have these installed on both machines: grsync openssh-client openssh-server
I have a Rackspace server running Ubuntu Lucid Lynx, where I have installed an IRCd-Hybrid. I can connect to the IRC server using irssi that was installed on the same machine where the server is, but when I try to access it from my computer at home or my friends try I get this error: Code: Connection Refused What should I do?
When I was checking the /var/log/messages, I found these entries:
Mar 16 15:14:38 localhost smbd[13347]: [2010/03/16 15:14:38, 0] printing/print_cups.c:cups_connect(78) Mar 16 15:14:38 localhost smbd[13347]: Unable to connect to CUPS server localhost:631 - Connection refused Mar 16 15:24:38 localhost smbd[13691]: [2010/03/16 15:24:38, 0] printing/print_cups.c:cups_connect(78) Mar 16 15:24:38 localhost smbd[13691]: Unable to connect to CUPS server localhost:631 - Connection refused Mar 16 15:24:38 localhost smbd[13692]: [2010/03/16 15:24:38, 0] printing/print_cups.c:cups_connect(78) Mar 16 15:24:38 localhost smbd[13692]: Unable to connect to CUPS server localhost:631 - Connection refused Mar 16 15:27:34 localhost smbd[13716]: [2010/03/16 15:27:34, 0] printing/print_cups.c:cups_connect(78) Mar 16 15:27:34 localhost smbd[13716]: Unable to connect to CUPS server localhost:631 - Connection refused Mar 16 15:27:34 localhost smbd[13718]: [2010/03/16 15:27:34, 0] printing/print_cups.c:cups_connect(78) Mar 16 15:27:34 localhost smbd[13718]: Unable to connect to CUPS server localhost:631 - Connection refused
CUPS is stopped in the system and the system is configured as samba server. What could be the reason for these printing requests from smbd?
Im having some problem with my DNS. We are using a Linux web server as one of our web server which runs some live websites.When I trying to get the status of the DNS (NAMED) it comes the following error :
The same error appears when Im trying to apply any changes on zone level for a selected doamin in WEBMIN. (Basically can't apply changes)
WEBMIN > Servers > BIND DNS servers > click a selected-domain.co.uk > Apply changes
But the server seems to be running without effecting any probelms to the sites or users. I have been searching weeks for this problem & couldn't find a solution. And also Please note that Im bit new to Linux.
I want to create script wherein it will check the application if its running. The command that I'll be using to check the application is telnet (if you can recommend others, that's ok). I've an application and it is listening to port 1808. If I do telnet localhost 1808, the response is :
What I want to happen is if the response is like to code above, it will execute a commands. Obviously, above code knows that the application is not working so I need to execute a commands. I created a script before using expect but I don't think it will work because I haven't establish a shell yet unlike successful telnet I could spawn expect.
I have become convinced that rsync for CentOS 5 is broken. I'm trying to set up automatic backups between 2 servers in 2 different countries using rsync under CentOS 5.I can get manual backups to work between the 2 servers by doing two things I shouldn't need to do, but automatic backups fail and I see no solution.Here are the problems I am encountering: According to the instructions I've read everywhere, I am to set up two configuration files:
/etc/rsyncd.conf /etc/rsyncd.secrets
When I run rsync from root, it apparently just totally ignores these two files. No custom greeting, no log, no password used. Even when I specify --password-file=/etc/rsyncd.secrets in the command line, it still ignores it. I am prompted and I must enter the password manually. Let me back up a moment. After first installing rsync, when I ran any command to access the root server, I get this error:
ssh: connect to host 111.222.33.44 port 22: Connection refused rsync: connection unexpectedly closed (0 bytes received so far) [sender] rsync error: unexplained error (code 255) at io.c(463) [sender=2.6.8]
I read everywhere that rsync uses port 873, not port 22 which is used for SSH. Why is rsync on CentOS trying to use port 22?I have SSH switched from port 22 to another port (let's call it 5432 here) and block port 22.So, I have added this to the command line:
--rsh='ssh -p5432'
Then I get a connection ...
... but it prompts me for my password. It doesn't matter that I have my username and password, same one, in /etc/rsyncd.secrets on both servers. It still asks.And it rejects my password!The only way I can get it to connect is by creating an SSH user on the remote server for this.Even then, rsync STILL prompts me for a password, even though:
1. the username and password are specified in the /etc/rsyncd.secrets files on both servers
2. I've added the command line parameter --password-file=/etc/rsyncd.secrets Therefore, it is totally impossible to use an any cron job or other automatic synchronization, under CentOS 5.
Yes, I have made sure that I have the latest rsync. I have run yum update for everything.Yes, I have double checked, triple checked, and quadruple checked my config files.
I have my desktop computer (running F13) configured to accept ssh over port 22 via the firewall configuration tool. If I type ifconfig -a, this computer, which is running on my wireless network, tells me:
However, if I go to my laptop computer (also running F13) and try and ssh into the desktop, i.e. ssh icthy@192.168.1.100, I get this response:
Code:
ssh: connect to host 192.168.1.100 port 22: Connection refused.
I guess I am confused to what is blocking the connection? Is there another means on F13 other than the default Firewall? I haven't really messed with the network at all. For what it's worth, I am hoping to set things up so I can just ssh into the computer name, (ssh icthy@desktop) eventually, but want to start with the IP. So, can anyone offer a hint as to what I can look for that is blocking port 22?
I am getting "ssh:connect to host restart port 22: Connection refused" error when trying to start "ssh" in Ubuntu. I uncommented the port 22 in ssh_config, I dont have iptables setup...Did try to check if the port is listening using the netstat -an | grep "LISTEN" & couldnt find.
I have a Rackspace server running Ubuntu Lucid Lynx, where I have installed an IRCd-Hybrid. I can connect to the IRC server using irssi that was installed on the same machine where the server is, but when I try to access it from my computer at home or my friends try I get this error:
I'm having problems with ssh and don't know what else to do. I keep getting "ssh: connect to host stop port 22: Connection refused" when i try to stop or start ssh:
I am getting "ssh:connect to host restart port 22: Connection refused" error when trying to start "ssh" in Ubuntu. I uncommented the port 22 in ssh_config, I dont have iptables setup...Did try to check if the port is listening using the netstat -an | grep "LISTEN" & couldnt find.