Since last Friday I get the following error when trying to upgrade packages with yum: [URL]: [Errno 4] IOError: <urlopen error (111, 'Connection refused')> Trying other mirror." The content of dag.repo:
[Code]..
I'm trying to connect with my server via telnet, but when i sent the command (telnet xxx.xxx.xxx.xxx Port) doesn't works and shows then follow error: Unable to connect to remote host: Connection refused, It happens with any port. Is strange but my telnet services works (telnet xxx.xxx.xxx.xxx), In addition, i tried with firewall enabled and disabled and the problem still happens. My centOS run on virtualbox.
View 3 Replies View RelatedError Type: <class 'yum.Errors.RepoError'>
Error Value: Error getting repository data for installed, repository not found
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in <module>
main()
[code]....
I've just completed a fresh install of Ubuntu Server (x64) on a HP Proliant N36L. During the installation I selected to install LAMP, SAMBA and SSH. To continue the installation of software on the server I wanted to connect remotely from windows PC on the same LAN. I am using PuTTY but when I try to connect I get "Error:Connection Refused". I have trawled the forums regarding the setup of putty and openssh and everything appears to be correctly configured.I have checked that the services are running on the server and that the IP address for the server is correct.The guides I have read online suggest that ssh should be correctly configured as part of the install, so why can I not connect from the same LAN?Is the firewall enabled by default during install?
View 2 Replies View RelatedERROR:Connection refused (111)when i change the password.I have a freebsd dovecot server.
View 1 Replies View RelatedI need to browse the net more securely and bypass throttling by an infrastructure-dictator by creating a SSH Tunnel directly to my internet service provider and use it as proxy.
I tried both a dynamic and local tunnel, was a able to connect to the server and log-in just fine, but when I tried to surf I get a 'Connection refused' error.
Here's what I tried:
Code:
ssh -D 8022 user@tunnel.host -N
ssh -L 8022:tunnel.host:8080 user@tunnel.host -N
(not at the same time of course)
Then I set 127.0.0.1:8022 as proxy in browser settings. As long as the tunnel is open the browser displays a blank page with no error when I try to open a remote web page, while the terminal gives me a 'Connection refused' error.
I'm using OpenSSH_4.7p1 Debian-8ubuntu1.2, OpenSSL 0.9.8g 19 Oct 2007 on Xubuntu Hardy.
In case anybody is wondering this is perfectly legitimate. The tunnel.host I connect to is a server set-up by my ISP specifically for this purpose.
Either of the examples above should work as others who have the same ISP reported that it works. Therefore, I suspect this is an issue with my own security settings which are slightly on the paranoid side but I can't figure out what. Stopping ufw and explicitly opening port 8022 didn't help.
I am getting tcp client connection refused error, when trying to establish tcp client connection from redhat linux to solaris unix. Connect system call is giving connection refused error
View 3 Replies View RelatedI now have a .tar.gz that has been created during my script, and finnaly i need to upload it via ftp to my computer, but i am unable to because i keep getting the "Connection refused" error, despite the fact that all the syntax appears to be right. in a bout of frustration, i have deleted the code and now no longer have what i had written.. so could someone please let me know the syntax to upload a file to a server? I am aware that other threads have been started about this issue but I am trying to ftp from an iPhone to a computer...
View 4 Replies View RelatedI Get message Connection refused when trying to connect to other computer in network. My System Ubuntu:
computer1 ip: 10.0.0.1
computer2 ip: 10.0.0.2
computer1 shell:
$ ftp
ftp> open 10.0.0.2
ftp: connect: Connection refused
I am trying to configure DNS on my CentOS 5. When i am trying to install BIND using YUM, i am getting the following error.
Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile http://mirror.centos.org/centos/5/addons/x86_64/repodata/repomd.xml: [Errno 12] Ti meout: <urlopen error timed out> Trying other mirror.Error: Cannot retrieve repository metadata (repomd.xml) for repository: addons. Pl ease verify its path and try again. I am able to ping from Linux to windows OS. But when iam trying to do
[Code]...
I have become convinced that rsync for CentOS 5 is broken. I'm trying to set up automatic backups between 2 servers in 2 different countries using rsync under CentOS 5.I can get manual backups to work between the 2 servers by doing two things I shouldn't need to do, but automatic backups fail and I see no solution.Here are the problems I am encountering: According to the instructions I've read everywhere, I am to set up two configuration files:
/etc/rsyncd.conf
/etc/rsyncd.secrets
When I run rsync from root, it apparently just totally ignores these two files. No custom greeting, no log, no password used.
Even when I specify --password-file=/etc/rsyncd.secrets in the command line, it still ignores it. I am prompted and I must enter the password manually. Let me back up a moment. After first installing rsync, when I ran any command to access the root server, I get this error:
ssh: connect to host 111.222.33.44 port 22: Connection refused
rsync: connection unexpectedly closed (0 bytes received so far) [sender]
rsync error: unexplained error (code 255) at io.c(463) [sender=2.6.8]
I read everywhere that rsync uses port 873, not port 22 which is used for SSH. Why is rsync on CentOS trying to use port 22?I have SSH switched from port 22 to another port (let's call it 5432 here) and block port 22.So, I have added this to the command line:
--rsh='ssh -p5432'
Then I get a connection ...
... but it prompts me for my password. It doesn't matter that I have my username and password, same one, in /etc/rsyncd.secrets on both servers. It still asks.And it rejects my password!The only way I can get it to connect is by creating an SSH user on the remote server for this.Even then, rsync STILL prompts me for a password, even though:
1. the username and password are specified in the /etc/rsyncd.secrets files on both servers
2. I've added the command line parameter --password-file=/etc/rsyncd.secrets Therefore, it is totally impossible to use an any cron job or other automatic synchronization, under CentOS 5.
rsync -av --password-file=/etc/rsyncd.secrets --rsh='ssh -p5432' sourcefiles* rsyncusername@111.222.33.44:httpdocs/rsync
rsync -av --password-file=/etc/rsyncd.secrets --rsh='ssh -p5432' sourcefiles* 111.222.33.44:httpdocs/rsync
rsync -av --verbose --progress --stats --password-file=/etc/rsyncd.secrets --rsh='ssh -p5432' sourcefiles* rsyncusername@111.222.33.44:httpdocs/rsync
Yes, I have made sure that I have the latest rsync. I have run yum update for everything.Yes, I have double checked, triple checked, and quadruple checked my config files.
Yum update do not respond and I get these exceptions. Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile [URL]... [Errno 14] HTTP Error 403: Forbidden
Trying other mirror. Error: Cannot retrieve repository metadata (repomd.xml) for repository: base. Please verify its path and try again I have search the forum but the suggestion have not help me resolve this issue. I tried both the mirrorlist and baseurl links in the CentOS-Base.repo file. I using proxy and have followed the instruction [URL]. When I run "yum --disablerepo "*" --enablerepo "rpmforge" list available" I get this
Loaded plugins: fastestmirror Error getting repository data for rpmforge, repository not found
I am facing connection refused error 111 in TCP client server program, in android native code which in C , but if code is in JAVA it works fine, but i want to continue in C only, in manifest file i have given permission and ip, port is correct .What am doing wrong?? or is their any network setting?? am using UBUNTU 10.04and If both client server Linux pc it works fine. only if android emulator becomes client then am getting connection refused
View 1 Replies View RelatedI have configured a Nagios server which is working well with all king of clients. But when I added a new windows machine to monitor, it gives a error message "connection refused". I have set everything as prior machines.
Now, I just wanted to know the process by which we can check if server is able to communicate with the client's NSclient daemon. In Linux, we simply issue "./check_nrpe -H hostname" and if ok, it gives the NRPE version which indicates the status ok.
I've used fetchmail for quite a while now and never had a problem, until (without having changed anything) today it suddenly quit working, giving me the error message:
fetchmail: connection to localhost:smtp [127.0.0.1/25] failed: Connection refused.
fetchmail: SMTP connect to localhost failed
fetchmail: SMTP transaction error while fetching from stefan%mydomain.com@mail.mydomain.com and delivering to SMTP host localhost
fetchmail: Query status=10 (SMTP)
I googled the error message, but didn't find anything that look promising. I use ubuntu 10.4.
I'm try to setup a database server using mysql, the server starts fine, and I can access it using the built in mysql client via console (adding databases and tables works fine), but the problem is... I always get a connection refused error whenever I access the database outside the built in mysql client (example, if I write a code that connects to mysql). So, I tried execute an nmap command and the only ports open are these ports:
[Code]....
there's no 3306 for mysql... I'm thinking that the firewall is just blocking the port that mysql is using, but my question is, how could the built in client connect to the server if there's no open port for mysql server? Don't clients usually access a servers through ports?
Please help me figure out what's wrong. Other nagios check for the same host is working except for this one.In <hostname>.cfg of nagios server, I need to add this to check for a specific pattern in the host's log:Quote:
define service{
use production-logs
host_name hostname
[code]....
telnet localhost the output is...
Trying 127.0.0.1...
telnet: connect to address 127.0.0.1: Connection refused
telnet: Unable to connect to remote host: Connection refused
I don't understand what is the problem. Its not configured properly how do i configure it?
I have FileZilla installed on this machine, and OpenSSH (with an open port 22) on another machine on my home network. When I try and connect, I get: Quote: Status:Connecting to 192.168.2.3... Response:fzSftp started Command: open "alphatwo@192.168.2.3" 22 Error:Connection refused Error:Could not connect to server
Which has left me puzzled as I have an open port. Does the username have to be defined somewhere? E.g. the machine acting as my SFTP server can be logged on to locally as alphatwo so that's what I logged in as (with the correct password). Is this correct? If so, does anyone have any ideas as to how I might rectify it? I want SFTP set up so I can copy PHP files from my laptop to /var/www/html/ on another PC (across the home network).
My problem is that the Mailserver in OpenSuse 11.1 (postfix, amavisd, spamassassin, clamAV en Razor) can not recieve e-mails, outgoing is ok. The problem started when I added 2 new users to de LDAP-server connected to Postfix.Some users can login, but most of them are getting the error: cant connect POP3 connection refused port 995.
View 9 Replies View RelatedI got connecting to our NAS over NFS working perfectly. Direct NAS Reading & Writing - How? But on Saturday I found out it had stopped working. For no apparent reason, not straight after an update either I don't think. When I manually try to mount --verbose:
mount 192.168.100.14:/IHL /mnt/IHL --verbose
mount: no type was given - I'll assume nfs because of the colon
mount.nfs: timeout set for Tue Jul 6 14:48:32 2010
mount.nfs: text-based options: 'addr=192.168.100.14'
mount.nfs: Unable to connect to 192.168.100.14:111, errno 111 (Connection refused)
mount.nfs: mount to NFS server '192.168.100.14:/IHL' failed: System Error: Connection refused
Corresponding fstab line that used to work just fine. 192.168.100.14:/IHL /mnt/IHL nfs auto 0 0 For now, I can drop back to Samba but this is a PITA as I can't open OpenOffice documents and write to them directly on the NAS. The fact smb://192.168.100.14/IHL works proves networking wise we're cool too. There is no firewall between this PC and the NAS, the NAS is instructed to allow my PC's LAN IP full access. OpenSuse's software firewall has been told to allow NFS Client too. Why would this setup break out of nowhere? How can I debug this best? I see nothing relevant in /var/log/messages How can I get it to work again? A hopeful reboot didn't do its usual wonders...
I am trying to backup a client called greetings.com, but when I do an amcheck on the server, I get:
WARNING: greetings.com: selfcheck request failed: Connection refused
For some reason my mail server (Postfix) seems to have stopped delivering mail.
The error in the mail logs is "status=deferred (delivery temporarily suspended: connect to 127.0.0.1[127.0.0.1]: Connection refused) against all mails.
I have researched to try and find an answer, most information on this problem seems to point to a malfunction in the Anti Virus and Spam Filtering solution.
I have checked that Amavisd and Clamd are both operating and have restarted Postfix but all to no avail, squirrelmail is not working either.. ie not even producing a login page.
I have not changed anything in the config and am just wondering if anyone has experienced similar and could point me in the right direction of a solution.
I have configured openssh 5.8p2 with centos 5.6. My sftp is working fine with chroot environment but i am having problem with SCP. I am dealing with muliti Redhat servers. When i try to transfer data from other linux server through scp it gives connection refused. For e.g ssh 5.8 is configured on new server and i want to transfer files from old server which is using openssh 4.3 version.i created same username and password on new server as on old server.My sftp users on new server has no shell access but only sftp access. When i try to scp from old server to new server it gives error connection refused. Is the below configuration only for sftp and can't scp? According to google the configurations i found are for scp and sftp. Do i need to generate ssh keys by giving users on new server shell access, once created then stop shell access again, as i dont want to give shell access permanent for security reasons? but i want to use ssh keys for more security as well.
Port 22
PermitRootLogin no
1.override default of no subsystems[code].....
Ok, a bit of a backround. I am a recent Ubuntu user and made the switch to Fedora being utilized as a server. I am trying to move to a new MUD(text based D&D type game) codebaseI have gotten my code compiled and executed the startup script. The process shows in the ps ux list. As the game it set up it uses port 7500. As the script running I get a "Connection Refused" error when trying to telnet to port 7500. Upon using nmap, I show only my SSH port open (the only daemon I have installed currently) yet no port 7500 open.
I believe this to be an issue somewhere in Fedora as I've had no issue on Ubuntu with past MUD codebases.I have disabled the firewall within Fedora and still no luck. Please bare with me as I'm new to fedora's intricacies.Short Story for those that hate reading long winded posts: A port that should be open by acript known to work on other distro's doesn't seem to open the called port using Fedora
When I try to ssh into my other ubuntu machine I get an error that says "port 22 connection refused" . I have been hunting around for an answer but can't find any.
View 1 Replies View RelatedI am merely trying to change the port for my ssh server.However it isn't changing.I edited my ssh_config file to:
Code:
# This is the ssh client system-wide configuration file. See
# ssh_config(5) for more information. This file provides defaults for[code]...
When i try to connect to my server via port 443 i get a connection refused error. However when i try to connect via port 22 it connects. Since that didn't work, i tried restarting the entire server.To restate, i changed the config file and restarted ssh then the computer, however the port didn't change.Ohh and yes my router is set to port forwarding on port 443, though it doesn't matter since I'm inside the network.
I have installed ssh in my system. i try connect some other system i am getting this error ssh root@192.168.7.140 ssh: connect to host 192.168.7.140 port 22: Connection refused
View 9 Replies View Relatedi administer an isp mail server on centOS my client has a mail server on redhat, the client can send mail successfully but if i try to send mail from outside i get "connection refused error" from my /var/log/maillog can anyone help this has been pending for long and im under fire!!
View 1 Replies View RelatedI'm trying to set up SSH on my work computer (9.10) but I keep getting a "Connection refused" error.I can connect to myself with 127.0.0.1 no problem but not through my IP.
View 8 Replies View Related
