I have a netbook ASUS EPC S 101
She runs XP SP3 on her main drive, a 16 GB SD card.
She has available another 16 GB SD card, which shows up as a drive under �My Computer�.
I would like to install Ubuntu on the spare card, keeping Windows on the main drive card.
My home network is has a Netcomm NB5 ADSL modem with a D-Link DI-524 wireless router (WEP encryption). While I can access the internet using the Vista partition, on the Ubuntu partition, I cannot access anything. Further investigating the problem, I have noticed that there is something wrong with the DNS on the Ubuntu partition. Pinging the IP address of a website (such as linuxquestions.org) loads up, yet, when I type in the Domain Name, there is an endless wait. I have already deleted and re-entered the contents of the resolv.conf file as well as try to change the settings but to no avail.
View 5 Replies View RelatedCannot activate Task Manager.
Message: 'Check if your dcopserver is running'
(ASUS Eee Netbook)
I need some help getting my wireless card working.I have a ASUS PCE-N13 and I'm running ubuntu 10.10 AMD64.I have confirmed that the card works running under win xp.The problem I have is that it can't see any available networks.I have downloaded and compile the latest driver from ASUS rt2860sta 2.1.0.0 and added these lines to the blacklist file.
blacklist rt2800pci
blacklist rt2800usb
blacklist rt2x00lib[code]...........
After I've installed an ASUS graphics card (ATI chip) my Ubuntu got no sound at all. My Codec is: VIA VT1708B 8-Ch. I've chosen "Internal Audio Analog Stereo" in Sound Preferences. Windows on the same machine works properly.
View 3 Replies View RelatedWindows says I have a intel wifi link 1000 bgn card however lspci list it as a intel wifi link 100 series. I can not get it work right and does not seem to be recognized.
View 2 Replies View RelatedI am also new to ubuntu but have manage so far,except for my tv-card. Seems like Metv and kaffeine cant see the tv-card ?! I have a asus mycinema-p7131 hybrid,does someone have info on installing this ? except for this i think ubuntu 10 is great.
View 1 Replies View RelatedI bought ASUS K50c with SIS graphic card and have win7 on it (i install it alone).I want to install ubuntu!I found installation of ubuntu 10.10 and tried to install it. There is a huge problem with my graphic card because resolution is 800*600! I found installation of ubuntu 10.04 LTS and tried to install it. Again problem. I tried to download drivers from www.sis.com but there are tar.file and i don't now what is that or how to install it.In windows I now how to install anything, but there is a problem.I am ready to install any version of ubuntu just to solve this problem.
View 2 Replies View RelatedI've installed 10.10 on my Asus 1015PE and when I went to look at the partition table I couldn't get Gparted to stay open. When I click on it, it opens the window, says that it is searching then scanning, then the window and program closes. The window is up for maybe 3 seconds tops.
I've got two other ubuntu netbook versions running on the same machine and gparted works fine on those installs. I've tried completely removing gparted and reinstalling, I've rebooted, I've tried calling it from the terminal, but always the same: it opens, starts to scan and closes.
I removed the hard disk from my EeePC and used it with Debian Squeeze on a 16GB SD card. It wasn't fast, but it was all solid-state, and that's important to me. However, lately it had started misbehaving. When recovering from sleep it'd lose all fonts (everything was displayed in squares), files could not be found and programs would stop working, and in a short time the system would become completely useless. Then after a while it started doing it regardless of sleep mode; I'd turn it on, do something, and it would work for a while - or maybe not - and then screw up. As an example, I noticed that unmounting partitions from gparted would do it almost always, but unmounting them from shell wouldn't.
Sometimes simply opening the browser would cause this weird crash. When shutting the system off it'd complain about the ext4 partition, though I don't remember exactly what it said. I thought it was Debian that had somehow screwed itself up (or I had...), so I wiped the card and installed Ubuntu Netbook on it. I was quite surprised to see that that, too, failed in the exact same way. I'd blame the SD card, but the strange thing is, the data on it is perfectly fine. In fact, I temporarily fixed the problem by reinstalling the hard drive, dd-ing the whole SD card on it and then expanding the partition over the unused space. From this setup, the system works perfectly - using the same data from which it used to fail when running from the SD card.
I just lost my weekend trying to install Xubuntu 10.04 on my pc I made the ps a while back - its built on a ASUS P4S800D-E motherboard and it has an ATI Radeon 9200 LE graphics card. It has a PS/2 keyboard and mouse, 1Gb of memory and a 160Gb PATA/IDE hard drive (I unplugged the SATA drives) Every time I installed or made a tweak to the config it failed in the same way. It showed its failure by continually repeating the first character typed. Regardless of whether this was the password screen for synaptic or just the first character typed into a terminal. Until the first character was typed the mouse seemed to work ok but then it would stall too
I've tried most things, running Xorg with/without an xorg.conf file, loading the ppa kernel and tweaking loads of bios and grub boot parameters all to no avail. So I think I want a more linux friendly graphics card and I fear I may need a new motherboard. Can someone recommend a replacement graphics card for this motherboard? Can anyone reassure me that my motherboard is ok with linux?
I have installed a Ubuntu Server 10.10 with fluxbox as X. Everything works fine except the sound. Either speakers or with headsets, it does not work at ALL. This is some informations that could help you. I need to listen music
[Code]...
just installed opensuse 11.3 on my asus eee pc 1018p and have severe problems to make the wireless network card work. tried to install the driver with ndiswrapper and b43-cutter, but without any success. ifconfig does not show any wlan0 device. below find output of
lspci -v
dmesg
ifconfig
installed opensuse on several notebooks/netbooks before but never ran into serious trouble.
[code]...
I've got a wireless card and would like to make a driver module for it from the ralink tarball. Here's the details:
1. The Asus PCI-G31 uses the RaLink RT2561/RT61 802.11g chipset.
Code:
lspci
<some output omitted>
04:03.0 Network controller: RaLink RT2561/RT61 802.11g PCI
2. I am using the latest driver download from www.ralinktech.com which is
2009_0123_RT61_Linux_STA_v1.1.2.3.tar.bz2
3. I followed the documentation and I think it makes a script. Here's part of the README from the tarball.
Code:
Build Instructions:
1> $tar -xvzf RT61_Linux_STA_Drv_x.x.x.x.tar.gz
go to "./RT61_Linux_STA_Drv_x.x.x.x/Module" directory.
2> $cp Makefile.4 ./Makefile # [kernel 2.4]
[code]....
I have a Wireless PCI-Express Adapter which I wish to install the drivers, though am having difficulty. The chipset on my card is a Ralink. I have visited the Ralink Website Ralink corp. and downloaded the RT2860 Wireless Lan Linux Driver version 2.3.0.0. I have extracted the files within my home directory. I have read the readme file, and from what I understand I have needed to do... I have typed in the Make command as a "super user". Unfortunately I have had no success and it states the following output.
[Code]...
While installing my redhat distro in VMware 6, its giving an error message that ethernet will be disconnected.
View 1 Replies View Relatedhow to install alsa drivers along with Asus xonar dgx sound card. I followed these instructions. URL....And until "Setting up modprobe and kmod support" instructions were clear. I should put something in /etc/modules, but I dont down exactly what.
Code: Select allroot@SERVER:~# aplay -lL;
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC887-VD Analog [ALC887-VD Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
Code: Select allroot@SERVER:~# lspci -nn | grep -i audio;
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05)
02:04.0 Multimedia audio controller [0401]: C-Media Electronics Inc CMI8788 [Oxygen HD Audio] [13f6:8788]
[code]....
I have a toshiba netbook, and I'm running linux slackware 13.The sound card is an HDA intel.So far I've ran alsaconf and configured the above mentioned sound card. I've also gone into the alsamixer and unmuted everything and turn the volume up.I get absolutely no audio.
View 15 Replies View RelatedI just installed Ubuntu 9.10 and I was messing around with some settings and all that. I went to System > Preferences > Appearance > Visual Effects. I then proceeded to enable the "Extra" option. I was prompted to restart my computer for the effects to take place. Now it is running somewhat slow, for example when I open up Firefox, or any other program, it loads very slowly. I went back to change the Visual Effects back to "None" but it was already on that option, I don't know why. I went to my Hardware Drivers and I didn't have the recommended graphics driver on, so I put the recommended on and that had no help.
View 3 Replies View RelatedHi, So brand new to Ubuntu and linux for that matter. Can't seem to get my network card up and running I have tried the various fixes through the forums, as you can see in the screenshots. Just hoping an expert could help me out so I can finally close the box and get sleep. I have a ASUS M4A78T-E with phenom II. I downloaded ndiswrapper (1.9) and have wicd. The card is trendnet 643PI but it shows up as RealTek 8190.
View 9 Replies View RelatedSo I want to run a Minecraft Server on my computer running Ubuntu 11.04. My goal is to have the server running over my network through one of the virtual terminals without any type of GUI running (to conserve resources). I'm shutting down the ubuntu GUI using the command:
Code: sudo service gdm stop which does a great job, but it also kills my wireless connection.I've tried editing my /etc/network/interfaces, and even uninstalling the gnome network mananger, but nothing seems to work. Can anybody help?
I install Ubuntu from an installation of Ubuntu, rather than using the installation CD?Specifically, I have Ubuntu 10.04 installed (and bootable) on an SD card, and would like to install from Ubuntu (running on the SD card) to the netbook's hard drive.
View 2 Replies View RelatedI'm thinking of getting a new multiple input sound card for my PC running 10.10
I want to be able to record at least 4 channels simutainiously and have good drivers in Ubuntu for it.
I'm thinking of setting up an older second-hand desktop to run ubuntu. The computer is a Dell Dimension 3000, with a Pentium 4 2.8GHz, currently 512mb ram(thinking of upgrading to 2gb), and integrated graphics. My old laptop is slowly dying, and I'm moving in a few months, and I'd like to use this computer after the move as my main home computer, for the usual internet, email, and word processing, as well as photo manipulation and storage(i'm into photography), and maybe some music recording(it has a really nice sound card).I'd really like to run a dual monitor setup, and I already have 2 VGA flat screen monitors.I'm on a budget(paid $50 for the computer...), but I think I need a video cwith 2 outputs.It doesn't need to be anything for gaming (the most I need it for is the silly effects on ubuntu). The computer has a spare PCI card slot for the card. Maybe something along these lines?:
View 1 Replies View RelatedI can't get jack working
soundcard chipset: EMU10k1X
Here Qjackctl log:
Code:
p, li { white-space: pre-wrap; } JACK server starting in non-realtime mode
Cannot lock down memory area (Cannot allocate memory)
control device hw:0
control device hw:0
audio_reservation_init
Acquire audio card Audio0 .....
jack server is not running or cannot be started
already added
@audio - rtprio 99
@audio - memlock unlimited
@audio - nice -19
to
/etc/security/limits.conf
I am member of audio group. Realtime option unchecked. I also reinstalled ubuntu in a fresh install and the same problem.
I have a 2003 iBook G3 White Dual USB laptop running Squeeze. I have a weird question. I found that get the WEP or WPA to work with the card, I basically delete the firmware "agere_sta_fw.bin". As the computer boots, it complains that it can't find the firmware, because it obviously isn't there anymore. However, the wireless card works just fine once it boots up. I can connect to my WEP wifi immediately, which is impossible if it uses the firmware. However, when the computer sleeps (which it likes to do all the time when it isn't plugged in) it hangs on wake trying to find the firmware. After awhile, it gives up and comes back up. The network controllers (LAN and Wireless) are completely missing and cannot be re-activated unless the computer is rebooted.
Now my question is this. What is driving my Orinoco Airport card and Network port when it can't find the correct firmware. Is there a command or program that will tell me what driver it is using to run it. Then, do you suppose that I could map the firmware file to that driver so the computer can wake with out problems?
[code]...
I am having trouble getting my USB-Dvb-Analog-Hybrid-TV-Card running with openSuse 11.1. (I already tried a lot of instructions I found on the net but none of them worked.) For example, when I try to install em28xx-new, compiling will work, but when modprobeing:
[Code]....
I have 2 graphics card on my laptop, one is integrated another is addon. both are ATI. How I can switch between them while running kde/ in similar as we can do it in win?
View 1 Replies View RelatedTrying to get Linksys WMP54G (RaLink RT2561/RT61 802.11g PCI) card running in FC12 with WPA. The drivers are included in the distro. No luck with network manager.
[root@nitefall ~]# lspci -v | grep -i network
01:00.0 Network controller: RaLink RT2561/RT61 802.11g PCI .....
When I try to do ifup wlan0 I get:
[root@nitefall ~]# ifup wlan0
Error for wireless request "Set Encode" (8B2A) :
SET failed on device wlan0 ; Invalid argument.
Determining IP information for wlan0...
<hangs there for a while>
I get the above error with or without encryption enabled at the AP. I've been over hundreds of posts on dozens of pages and nothing has worked. I have a dual-boot and the card works perfectly in Windows, so it's not a hardware issue.
I just got done installing Ubuntu on a new harddrive and set it up to dual boot with grub loader. However, when I boot into Ubuntu, the screen goes black. I can however login (blind) by hitting enter and typing password. The login sound goes and it logs in, however, the screen stays black. I am running a NVIDIA Quadro NVS 295 Video Card.
View 9 Replies View Related