I have 2 graphics card on my laptop, one is integrated another is addon. both are ATI. How I can switch between them while running kde/ in similar as we can do it in win?
View 1 RepliesI am trying to switch from the video device built into the mother board, to a card i just put into my machine. I'm using gnome and don't know where to start. I shouldn't need new drivers (based on a possible misunderstanding) because I am going from a nvidia 6100 to a 8600. I have looked in various places like the control center but haven't had any luck. I just started using linux and have very little experience in the terminal. Issues with the current card are stopping me in my learning process.
View 9 Replies View RelatedI am having trouble getting my USB-Dvb-Analog-Hybrid-TV-Card running with openSuse 11.1. (I already tried a lot of instructions I found on the net but none of them worked.) For example, when I try to install em28xx-new, compiling will work, but when modprobeing:
[Code]....
Keep trying to set the tv card to stereo, using tvtime and mplayer and v4lctl but it stays at mono. Put speakers up to me shell like goblets and it sounds like mono to me. I am completely at a loss so would like *anything* no matter how half-witted.
[Code]....
I have 2 HBA's in my system, in that one shows as READY state and the other HBA shows as DEAD state. I have asked the datacenter guys to to connect the HBA to another switch port and I rebooted the server. After reboot the second HBA came to READY state but after some time again it went to DEAD state.
Host adapter:loop state = <DEAD>, flags = 0x45a03
Is this the problem with the server or with the storage end
I'm running Ubuntu 10.10 and I'm running Skype 2.1 (Beta). Whenever I "x" out of the Skype program, from what I can tell it's minimizing the Skype program and not actually terminating the thread (just as it does in Windows), however when I "x" out of Skype the icon is not showing up in the system tray (but it does in Windows). So one would think that it's not running, however if I try to re-launch Skype I get an error message stating: Another Skype Instance May Exist.
I confirm this by going to System > Administration > System Monitor and sure enough, Skype is running. So if I "x" out of the program, how do I switch back to it because it's not showing up in the system tray? One last thing : Alt+Tab does not work. It will list the other programs running, but not Skype, despite the fact that it is running.
I have linux suse installed on VMware, my pc is running Windows XP. I have a switch connected to my ethernet card (also through console cable). When I am on windows I can ping the switch, but from linux I can't. My ethcard is "Bridged" on VMware, I can ping 127.0.0.1.
View 14 Replies View RelatedComputer is a Compaq presario v2000, runs fine with windows 7 32 bit. And before that I had Ubuntu on it. I have tried everything I remember that got wireless working with Ubuntu. Also the hardware switch for the wireless does not work while running lubuntu.
View 9 Replies View RelatedI have used a wireless LAN PCI card for 3 years and now I want to switch back to the onboard wired LAN card but I cant get it to recognize and I have enabled it in BIOS also the wireless LAN card has been removed.Should I put it back in and then try to switch?
View 6 Replies View RelatedI've decided I want to cross over to Ubuntu from Win vista but there's one thing i cant get working. My wireless card. My wireless card is a Xterasys xn 2523g I can't make this switch until i have the internet working.
View 9 Replies View RelatedI am porting the kernel on my hardware board...dmesg shows that...
mmc0: mvsdio driver initialized, lacking card detect (fall back to polling)
mmc0: host does not support reading read-only switch. assuming write-enable.
mmc0: new high speed SDHC card at address aaaa
[code]....
I have an HP mini 110 with Fedora 11 install. I installed the broadcom-wl and wl-kmod from yum but still no wireless. First I can't get the broadcom card to turn on using the slide switch on the front of the computer. The device is inactive in the network configuration-devices window. The card is not in the network configuration hardware window. When I try to add it manually, there is no entry for the card in the drop down list. I am new to Fedora but have used linux for years. Unfortunately this is my first attempt at wireless networking.
The posts and google stuff doesn't say much more than "yum install broadcom-wl" Can anyone point me into the right direction? I have a feeling I am missing something very simple, because this computer dual boots Linux Mint and wireless works flawlessly.
I recently switched from windows xp to ubuntu and have been very impressed so far. However, I've run into a bit of a problem. My laptop has a switch on the side that enables or disables the wireless card and every now and again its inevitable that someone accidentally switches it off. When I had windows xp all you had to do to re-enable it was to go to the device manager and turn it back on however ubuntu apparently doesn't have a device manager. so I need help. my wireless card info is05:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
View 1 Replies View RelatedGot a bit of a problem where xorg can't start kdm. I pulled out a dying AGP card to try and switch to onboard video, and I think the previous configuration is gumming up the works.I've been running this system for quite a while, as you'll be able to tell from the version numbers.Would like to avoid having to transport my Amarok databases to a new server. I make heavy use of the song ratings and whenever I try to transport the database from the old system to a fresh build I have to spend hours relearning sql commands.Any ideas how to either fix the resolutions on the ATI or (preferably) get KDE to start on the onboard graphics?
View 3 Replies View RelatedI have a laptop connected to the the net thru an adsl modem, when I switch off the laptop network interface,(thru system-config-network) the light of the laptop network card plugged in the router stays on ( green) where as in my pc, when i do the same thing , the light of my pc network card goes off in the modem
View 5 Replies View Relatedi have a little experience with ubuntu but i have had bugs that are not resolvable at this time in ubuntu. so instead of giving wild bill back my pc i am looking for a new distro. my concerns with ubuntu revolve around acpi. no fan control and high temp. the 2nd problem that is almost overlookable is the ata1 softreset error. it usually is no problem but occasionally have to do manual fsck to fix. so heres my laptop specs. toshiba a305d-s6848. amd turion x2 ati x1250 integrated. 3gb ram. 500gb hd vista and ubuntu 9.04 dual boot grub with 100gb ubuntu and the rest vista. so q1= what suse version would be best?
q2= is suse's acpi better? ubuntu runs all features but fan control
q3= is suse as easy to install? or harder
q4= ati graphics i know for my card went to legacy what version still has the ati drivers for my card
q5= is suse easier or harder to work with and get everything working.
i know no linux is or opsys is perfect. im just looking for one that is stable and works the pc correctly. i know its a big thing to ask. i know no one can tell me that. but just looking for suggestions. im thinking of downloading suse and does all the downloads support live sessions.
I just installed Ubuntu 9.10 and I was messing around with some settings and all that. I went to System > Preferences > Appearance > Visual Effects. I then proceeded to enable the "Extra" option. I was prompted to restart my computer for the effects to take place. Now it is running somewhat slow, for example when I open up Firefox, or any other program, it loads very slowly. I went back to change the Visual Effects back to "None" but it was already on that option, I don't know why. I went to my Hardware Drivers and I didn't have the recommended graphics driver on, so I put the recommended on and that had no help.
View 3 Replies View RelatedHi, So brand new to Ubuntu and linux for that matter. Can't seem to get my network card up and running I have tried the various fixes through the forums, as you can see in the screenshots. Just hoping an expert could help me out so I can finally close the box and get sleep. I have a ASUS M4A78T-E with phenom II. I downloaded ndiswrapper (1.9) and have wicd. The card is trendnet 643PI but it shows up as RealTek 8190.
View 9 Replies View RelatedI removed the hard disk from my EeePC and used it with Debian Squeeze on a 16GB SD card. It wasn't fast, but it was all solid-state, and that's important to me. However, lately it had started misbehaving. When recovering from sleep it'd lose all fonts (everything was displayed in squares), files could not be found and programs would stop working, and in a short time the system would become completely useless. Then after a while it started doing it regardless of sleep mode; I'd turn it on, do something, and it would work for a while - or maybe not - and then screw up. As an example, I noticed that unmounting partitions from gparted would do it almost always, but unmounting them from shell wouldn't.
Sometimes simply opening the browser would cause this weird crash. When shutting the system off it'd complain about the ext4 partition, though I don't remember exactly what it said. I thought it was Debian that had somehow screwed itself up (or I had...), so I wiped the card and installed Ubuntu Netbook on it. I was quite surprised to see that that, too, failed in the exact same way. I'd blame the SD card, but the strange thing is, the data on it is perfectly fine. In fact, I temporarily fixed the problem by reinstalling the hard drive, dd-ing the whole SD card on it and then expanding the partition over the unused space. From this setup, the system works perfectly - using the same data from which it used to fail when running from the SD card.
I have a netbook ASUS EPC S 101
She runs XP SP3 on her main drive, a 16 GB SD card.
She has available another 16 GB SD card, which shows up as a drive under �My Computer�.
I would like to install Ubuntu on the spare card, keeping Windows on the main drive card.
Can the fibre channel switch in the centOS5.3 cluster edition be switched for a regular router or hub?
If so how would one do this? If not why does the switch have to be fibre channel?
I have a 2003 iBook G3 White Dual USB laptop running Squeeze. I have a weird question. I found that get the WEP or WPA to work with the card, I basically delete the firmware "agere_sta_fw.bin". As the computer boots, it complains that it can't find the firmware, because it obviously isn't there anymore. However, the wireless card works just fine once it boots up. I can connect to my WEP wifi immediately, which is impossible if it uses the firmware. However, when the computer sleeps (which it likes to do all the time when it isn't plugged in) it hangs on wake trying to find the firmware. After awhile, it gives up and comes back up. The network controllers (LAN and Wireless) are completely missing and cannot be re-activated unless the computer is rebooted.
Now my question is this. What is driving my Orinoco Airport card and Network port when it can't find the correct firmware. Is there a command or program that will tell me what driver it is using to run it. Then, do you suppose that I could map the firmware file to that driver so the computer can wake with out problems?
[code]...
So I want to run a Minecraft Server on my computer running Ubuntu 11.04. My goal is to have the server running over my network through one of the virtual terminals without any type of GUI running (to conserve resources). I'm shutting down the ubuntu GUI using the command:
Code: sudo service gdm stop which does a great job, but it also kills my wireless connection.I've tried editing my /etc/network/interfaces, and even uninstalling the gnome network mananger, but nothing seems to work. Can anybody help?
Trying to get Linksys WMP54G (RaLink RT2561/RT61 802.11g PCI) card running in FC12 with WPA. The drivers are included in the distro. No luck with network manager.
[root@nitefall ~]# lspci -v | grep -i network
01:00.0 Network controller: RaLink RT2561/RT61 802.11g PCI .....
When I try to do ifup wlan0 I get:
[root@nitefall ~]# ifup wlan0
Error for wireless request "Set Encode" (8B2A) :
SET failed on device wlan0 ; Invalid argument.
Determining IP information for wlan0...
<hangs there for a while>
I get the above error with or without encryption enabled at the AP. I've been over hundreds of posts on dozens of pages and nothing has worked. I have a dual-boot and the card works perfectly in Windows, so it's not a hardware issue.
I installed the powerpc version of Debian Squeeze 6.0.1a on an eMac. According to the Wikipedia article, these systems had an nVidia geforce2 MX graphics card, and the system is using the Debian open nVidia drivers from install. I've gotten everything working on it, except the graphics are off. It's acting like either it can't handle the resolution or all the colors and looks a little like it wants to run in 256 colors. It's not unusable, just annoying. I know that it can handle a normal resolution because it was doing fine under Mac OS X puma before I wiped it and installed debian (I put debian on it because I needed a modern web browser, and the ones available under that version of Mac OS X weren't doing the job). I went to the nVidia website, but they only have the driver for x86 Linux. I need it for the G4 powerpc. Any ideas? I'm used to running Ubuntu on x86 machines, so the powerpc thing is throwing me a bit.
View 4 Replies View RelatedI install Ubuntu from an installation of Ubuntu, rather than using the installation CD?Specifically, I have Ubuntu 10.04 installed (and bootable) on an SD card, and would like to install from Ubuntu (running on the SD card) to the netbook's hard drive.
View 2 Replies View RelatedI'm thinking of getting a new multiple input sound card for my PC running 10.10
I want to be able to record at least 4 channels simutainiously and have good drivers in Ubuntu for it.
I have a system with Voyage-Linux (Debian based) as my OS running on a compact flash card. Some files appear to be corrupt on it. Whenever I do a ls,cp,mv,rm command on these files I get the message Stale NFS file handle. I actually had the problem on 2 identical systems. I fixed the first one by attaching the CF card to another linux system and then running e2fsck -f -v /dev/sdb1. It got rid of the bad file.
My problem is I won't be able to do that all the time. I'm gonna have several of these systems in different places and won't have direct access to them, therefore I'm looking for a solution that would work on the system itself. Now running e2fsck on a mounted filesystem seems to be a bad idea from what I read, but I tried anyway and it did not get rid of the file. I tried running tune2fs -c 1 /dev/hda1 and rebooting, which is supposed to run e2fsck after the next boot (not 100% sure here) but that didn't seem to work.
I'm needing to have the acer-wmi module running at startup for my wireless card. In ubuntu this is located at /etc/modules and I was wondering where the same file is within Fedora
View 2 Replies View RelatedI'm thinking of setting up an older second-hand desktop to run ubuntu. The computer is a Dell Dimension 3000, with a Pentium 4 2.8GHz, currently 512mb ram(thinking of upgrading to 2gb), and integrated graphics. My old laptop is slowly dying, and I'm moving in a few months, and I'd like to use this computer after the move as my main home computer, for the usual internet, email, and word processing, as well as photo manipulation and storage(i'm into photography), and maybe some music recording(it has a really nice sound card).I'd really like to run a dual monitor setup, and I already have 2 VGA flat screen monitors.I'm on a budget(paid $50 for the computer...), but I think I need a video cwith 2 outputs.It doesn't need to be anything for gaming (the most I need it for is the silly effects on ubuntu). The computer has a spare PCI card slot for the card. Maybe something along these lines?:
View 1 Replies View Related