I install Ubuntu from an installation of Ubuntu, rather than using the installation CD?Specifically, I have Ubuntu 10.04 installed (and bootable) on an SD card, and would like to install from Ubuntu (running on the SD card) to the netbook's hard drive.
View 2 Replies
Does anybody know how to or even if it's possible to create an ISO image (a snapshot, if you will) of an entire volume on a Linux box so that I can use that ISO to burn to a CD use in the future for creating an identical configuation on another box (which would have the same exact hardware)? It is to my understanding that I'd have to first create the ISO file of the entire system and then burn it to a CD and somehow mount it onto the hard drive of the identical-system-to-be.
I'm thinking that I'd have to use the "mkisofs" command but I'm not sure exactly how to do this. P.S. I do not want to use any 3rd party applications.
Have you ever used an SD card as a substitute for a hard drive? The target machine is an MSI "nettop," more or less equivalent to a couple of netbooks glued together. It has dual Atom CPUs, 2 GB RAM, an optical drive, and a bunch of other ports and connectors not usually found on netbooks but standard on a desktop machine (thus the "nettop" moniker). So this is no powerhouse computer, but Ubuntu should run decently on it.
That's the thing: the machine has no hard drive. Instead, it has an 8 GB SDHC card. While the card is a "Class 10," and therefore well above average for an SD card, it's proving to be a poor substitute for a real hard drive. I'm working on the machine for a friend, and I think I'm going to have to recommend he spring for a new SATA HDD. Installing Ubuntu 10.04 from a CD-ROM to the SDHC card took forever. At least there was ample space (just try cramming Windows 7 into 8 GB!).
Similarly, the first round of updates took almost all day to install. The system is very sluggish in general, more so than is normal for a netbook-class machine, based on my experience with Ubuntu 10.04 on an Acer Aspire One D150. I suspect that the basic problem is the glacial speed of the SDHC card compared to a SATA hard drive. Although the SDHC card is rated for 20 MB/s reads, that's nowhere near even a slow SATA hard disk.
Write speed is likely a lot slower even than that, which perhaps explains the hours and hours required to install Ubuntu + updates. It seems as if launching apps is slow as well - again, probably a symptom of the SDHC card's sluggish reads, compared to a SATA HDD. Are there any secret tricks to make running Ubuntu off an SDHC card more bearable? Or should I just tell my friend he needs to buy a regular HDD?
I have been trying to install Ubuntu on my main computer for some time. I think I have two problems: my hard drive and video card. I started with Ubuntu 9.04 but got nowhere. I am now trying Ubuntu 9.10 32 bit. I can at least use the live cd if I put the video on safe mode. Just in case you are wondering, I have tried other distros: Fedora, OpenSUSE, Slitaz, Wolvix, etc. Only Slitaz and Ubuntu 9.10 works on a live cd.
Information on my computer:
OS: Trying to install Ubuntu 9.10 32bit
Motherboard: ASUS M3A78
CPU: AMD Phenom 9500 Quad Core
Video Card: Galaxy Geforce 9500 GT 1GB 128 bit DDR2 (Nvidia) Hard Drive: Hitachi 1 TB Sata Drive 3 Gb/sec 7200 RPM Ram: 4 GB (I think, its been awhile since I built this thing) DVD Burner: LG I think I have two problems: the Sata Hard Drive and the Video Card. When I go to install it, I can get to the install menu but from there all I get is a blank screen. I have tried to put the video in safe mode then install it but I get the same result: a blank screen.
How do I know if Ubuntu recognize the Hard Drive and Video Card? I tried the mount command to see what it sees but I didn't notice any Sata Drives. I was told that I may have to do something with the kernel so it will recognize my Hard Drive. How would I do that?
I have been working on this for awhile now. On a side note, does it matter which Sata Plug the hard drive is on? Right now I have it on the 1st one but I would like to move it to the second one because I want a dual boot system. And yes I know I can use the same hard drive but I would like to keep them separated and use a switch to pick which OS system to use.
While running on the Live Cd, Ubuntu seems to know about my video card and ask to install some drivers but then it asked to be rebooted and it came back up not recognizing anything; video card and hard drive that is. On the live cd I ran the following commands: lswh, lspci, mount, and df. I am not too sure if they will show if the hard drive and the video card are working since I did them on the Live CD. Also on the lspci command, I did this after Ubuntu loaded the driver for the card.
[Code]...
I bought a MENQ easy PC e790 with 2GB flsdh memory and 128 M RAM but no hard drive. It comes with Windows CE 5.0 The specs are as follows:
CPU: Samsung 400MHz/533MHz processor
RAM: 128MB
ROM: 2GB
OS: Microsoft Windows CE 5.0
Pixel resolution: 800 x 480 pixels
code....
How can linux be installed in CEs place and what distro would be best?
I bought a Samsung N150 netbook with the idea that I would install Linux on it.Now that I have it, I learn that it will *only* boot from the hard drive. there any Linux distribution that can install itself on this machine? Preferably in a separate partition allowing boot to either Linux or Win 7.This needs to be a high confidence installation, because if the existing Win 7 installation is screwed up there appears to be no way to recover.
View 14 Replies View RelatedI have a toshiba netbook, and I'm running linux slackware 13.The sound card is an HDA intel.So far I've ran alsaconf and configured the above mentioned sound card. I've also gone into the alsamixer and unmuted everything and turn the volume up.I get absolutely no audio.
View 15 Replies View RelatedBackground is this: Laptop has an internal h/d (obviously) so I removed it from laptop. Then set Bios to boot from external h/d. Installed Fedora 11 on ext. h/d no swap partition as drive already has 4 partitions. Fedora ran lovely!! I then replaced internal hard drive but left bios to boot from external hard drive. Boot screen for fedora came up, hit enter and fedora started loading. The little balloon started filling up, got to a quarter full and then screen went black. Had to reboot to get going again,same thing happened. Can anybody tell me what may be causing it,i.e. black screen. Fedora boots up and runs lovely with internal h/d removed. Any help very gratefully received. M/c has intel dual core processor, 3 gig of ram.
View 2 Replies View RelatedTrying to install Fedora 12 using the 6 CDs. Trying to install on an older x86 box.Problem is that when detecting my hard drive, Fedora 12 recognizes it as a sda hard drive instead of hda hard drive. I have no SCSI connected to my computer what so ever. It's an old fashion PATA Western Digital hard drive.If I proceed with the install, Fedora 12 only installs 200MB of the OS from the first CD only. No options for additional software or anything.
View 1 Replies View RelatedI installed Ubuntu 9.10 onto my laptop and then upgraded it to Ubuntu 10.4. I've added some software packages along the way, such as MythTV and several smaller apps, but have not gone crazy in adding apps. I have a 160GB hard drive.I ran out of disk space recording a World Cup game and was surprised. I deleted all of the MythTV recordings and ran Computer Janitor and now I have only about 50GB of free space! It is not my primary computer, so I don't have a bunch of videos, music, pr pictures on it.
I did a clean install of Ubuntu 10.4 to a USB flash drive and it has only 3.7GB occupied on the drive.Any recommendations of why I have over 100GB on the hard drive and any cures on how to clear out unneeded files?
My desktop pc was messing up bad and i had too take out the hard drive and put it in my other desktop it works great but theres one thing it dont see my video card how can i get it too look for it? it was a nVidia and now Video adapter Intel Graphics Media Accelerator 950.
View 8 Replies View RelatedI got a laptop from a friend. For some reason, it loaded the grub off of an SD card (He was running Xubuntu), so I tried re-installing Ubuntu itself on the hard-drive, completely ignoring the SD card. It wont work. The guy who sold the laptop to me took a look at it, and he's alright with Linux, but he can't figure out what's wrong with it. I tried adding my own partition tables, and they look something like this:
sda1 / 20G
sda2 /home 130G
sda3 SWAP 10G
I know it's more swap than I should have, but I plan on upgrading the RAM.Anyways, we're both completely lost. I think we want it to load a grub menu at this point because one isn't loading.
I have a home network that includes a couple of computers {A, B, C, D}. currently, I have a cron jon that runs every minute and updates (using rsync) the hard drives of computers {B, C, D} with the contents of hard drive {A}. So far everything works great, as hard drive {A} barely has any information on it. Now, I am about to copy a lot of information (about 8 GBs) to hard drive {A}. Naturally, the cron job will run (as it runs every 1-min) and try to 'sync' the contents with hard drives {B, C, D}.
Given my network (100Mbit/sec), there is no way the cron job will be able to 'copy' the contents to hard drives {B, C, D} in one minute. It will take much more time. Does this situation create a problem? meaning, will cron re-run a new rsync instance 1min later, even though an existing rsync process is running and still copying information to hard drives {B,C,D}? Will my backups be hurt / slowed down tremendously because of this?
I am wanting to replace the hard drive on my laptop with a Compact Flash Card. I bought a card and a adapter, but I am seeing that there are a lot of downsides to this (e.g. the card is slower, writes should be conserved because of limited write cycles, etc..) plus, in order to change the hard drive in my laptop (ibook g3 clamshell) you literally have to disassemble the entire thing! I mainly wanted to do this project to increase my battery life. However, some people say that it doesn't make much of a difference, while others say it is wonderful. So, to those that have done this mod, how much of a difference did it make for you?
View 1 Replies View RelatedI have an old computer that I want to turn in to a backup server. I was planning on using a 1 TB drive connected by a SATA card since the motherboard only has PATA. However when looking everything I've found makes it sound like I need to install the card for it to work. I want to know if I can install Debian to the hard drive through the SATA card or not?
View 6 Replies View RelatedI've been trying all day to install Ubuntu Server 10.04 on my netbook via a flash drive (It doesn't have a CD-Rom drive).However, I can't get any further than "No common CD-ROM drive was detected." I've looked at various solutions but have not found anything that works yet.
View 1 Replies View Relatedi installed Fedora 12 on an external hard drive. Everything went fine with the installation and it was working perfectly until i tried to install my video card drivers. I have done this many times before and it has worked. I have an ATI card. Anyway after installing the driver i rebooted and now when it starts it show the loading bar on the bottom but then nothing happens its just a black screen!. The worst part is that when i go into windows and my external is plugged in windows wont read it and i have very valuable data on it. I go into disk management and it shows up but windows says that its empty. which is obviously not true because Fedora starts to boot. I really just want Fedora off my external and for windows to read my external with all the files still on it. Is there a way to get by that blank screen?
View 2 Replies View RelatedI wanted to know if i can install 9.10 onto a usb flash drive--without using my computers hard drive at all when running ubuntu off the flash drive-
View 3 Replies View RelatedI would like to install Linux Ubuntu 11.04 on an external hard drive - its partitioned and ready for Linux.I've downloaded and burnt the .iso file to a DVD so its all good so far...First of all... is this possible without messing up my macbook? I don't particularly want to break into my macbook to disconnect the hard drive (I read on a tutorial for a previous version of Ubuntu that I'd have to do that... - does it still apply to 11.04?) - as it voids the warranty (I checked ).The reason I ask this is because I had a friend who partitioned their internal hard drive and installed Ubuntu on it. But after installation was complete they couldn't boot up Windows 7 or Ubuntu... and it resulted in them having to clean install Windows 7... - I don't want to end up in that situation
Second... If it is possible to install it without messing up my macbook... - Do I just follow the install instructions but just make sure that where possible I make sure that everything is installed on my external hard drive?...I really need someone to put my mind at rest that everything will run smoothly and that I'll be able to run Mac OS X as usual but also that I'll be able to boot from my external hard drive to run Ubuntu.
It started when I wanted to dual boot Windows 7 and Opensuse off of my netbook (No DVD/CD drive) I tried install suse from an external hard drive and I botched it. I ended up erasing EVERYTHING off of my internal netbook hard drive. Windows and all.
Well, I had a couple of other computers so I studied up and eventually successfully installed OpenSUSE 11.2 on my external hard drive (11.3 being the one that I accidentally erased everything with, so kinda scared of it) and now I want to install openSUSE 11.2 on my internal netbook hard drive.
I can not use disks
I can not use a flash drive (For some reason, even if I make it bootable, it will not load up, this could be because it's actually a 8GB microSD card that is placed in a USB card reader.)
I can not use an external hard drive because that's what I'm running suse off of.
I've tried reading up on how to install suse on another drive off of the hard drive and I've gotten as far as whenever I boot up the netbook with the suse external hard drive connected it will ask to boot into OpenSUSE, the Fail Safe, or to install OpenSuse. When I select to install it it gives me the Error 18 Unknown File system.
I've tried formatting the internal hard drive twice. One as NTFS and again as EXT4. Neither seems to effect it other than when it's ext4 I can open it and it contains a Lost and Found folder.
When I interrupt the boot sequence by pressing c and going to the terminal and I use the root (hd +TAB command it tells me I have a hd0 and a hd1. The hd1 only has 1 partition which is ext4, which I'm assuming hd1 is the internal hard drive (I'm not sure how to check) and the hd0 is the external hard drive, which has three partitions. One with an unknown file system and two with ext4. When I try to enter the set up from the terminal it gives me the same error for any thing I put it (e.g. root (hd0,0) gives the same error as root (hd0,1), or root (hd0,2) and root (hd1,0)
Something like it cannot locate these two files I'm assuming it needs to boot. If anyone finds this relevant I'll retry it and post the files its missing.
I've been searching for awhile and can't find any threads that can solve my problem. From other threads, however, I have noticed that I should probably include my menu.lst, listed below
Code:
I have also ran the boot info script and received the RESULTS.txt file it generates. Listed below
Code:
I have tried many distros and get the same message faulty hard drive SATA the computer was running Windows Vista just fine. I changed the Bios for SATA to be ATA instead of ACHI..
View 1 Replies View RelatedI have followed the directions to install the Netbook Edition onto my Acer Aspire One via usb drive. When I created the USB using the Universal USB Installer app, I created a 1GB persistence on my 4GB USB. I now want to install rather than run from the thumb drive, except when I get to partition area, it's showing no drives at all. I had XP, but I'd like to use the entire disk for UNE now. how to get it to install?
View 7 Replies View Relatedi have installed fedora 14 with so many libraries ,development tools installed on my pc but i usually have to present some projects which can run on my system .........and can't be executed or compiled due to absence of libraries and tools there so, i there some way to so that i can use this current installation on my hard drive of my pc to some external media like external hard disk and plug and use that installation anywhere on any system..
View 2 Replies View RelatedI just brought a netbook(1005HA) and wanted to try out Ubuntu netbook remix 10.04 but I clean installed it.I like it but there are programs on Windows that I need to use for my HD2. My friend put a windows 7 .iso file on the netbook and I transferred the image to my USB drive to make a bootable USB but it does not boot. install Windows 7 from a USB using Ubuntu correctly?
View 1 Replies View RelatedI got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
View 2 Replies View RelatedMy parents bought a new hard drive for a laptop that I've owned for several years. It's much larger than the current one, so I plan on splitting it up to dual boot it with Ubuntu.I have no problem with partitioning a drive (I always keep a LiveCD handy), but my question is this: how can I go about moving the existing partition to the new drive? This is a laptop, so I can't simply plug the new drive into another slot.
Also, even if I manage to move it, will Windows still work on the new drive in a larger partition? I've had this laptop for quite a while, and I've lost the recovery discs that came with it a long time ago. I also have a lot of software without CDs to reinstall them with. This makes not reinstalling Windows a high priority.
I am noticing problems accessing the firewall gui and mounting the second hard drive in my PC running Fedora 13. This is only when I am accessing the machine with VNC. If I am sitting in front of the physical machine, I have no problems at all. I would like VNC to behave more like I am sitting in front of the computer. Is there a way to do this? Thank you in advance for your feedback.
View 4 Replies View RelatedSometimes when I do anything write heavy such as transferring backup or downloading large files from the net, the machine crashes almost completely.
View 8 Replies View RelatedI currently have a centos 4.4 I believe running with a 250GB hard drive. I want to make an image of that hard drive. I have tried removing the drive and connecting it to my windows pc using an adapter that would allow my windows machine run the hard drive as it was a regular external hard drive. Of course windows doesn't reconize that drive since it is linux partitioned. I am thinking that I need to have the hard drive inthe box I am wanting to copy and put in a blank drive in the box that I want to copy to. And boot from a live CD and use cat or dd to copy it. I have seen the commands before bust I am thinking this is the only way. Basically I am wanting to have a duplicate of the drive and build a whole new server that is already all setup.I will just change the host name and assign it another Public facing UP. Is this correct? Oh, and the new server will have different hardware. Might even be AMD or intel different from source or destination.
View 12 Replies View RelatedI have a laptop with only 30GB storage and I want to install Lubuntu in virtual box but Lubuntu needs 5GB of storage space which i dont have. Could i use an external 160GB hard drive to act as the hard drive for the virtual machine without affecting the files that are already on the external hard drive
View 6 Replies View Related
