Windows says I have a intel wifi link 1000 bgn card however lspci list it as a intel wifi link 100 series. I can not get it work right and does not seem to be recognized.
View 2 RepliesI got a new EDUP Wireless Lan PCMCIA Adapter to replace a busted SMC wifi card. I am running Ubuntu 9.10 on a Dell laptop. The OS will not recognize the new card. Here is some output code...
View 1 Replies View RelatedI'm running Joli Cloud 1.2 on my HP dm1z netbook and for some reason, it doesn't seem to recognize my wireless card. Because the HP dm1z has no ethernet port, I had to use a USB adapter to connect to the internet.
View 2 Replies View RelatedHere are the specs for the computer in question:
Distro: Mint 10 Julia Gnome
Dell Inspiron 1100
2.40 ghz Intel Pentium 4
8 kilobytes primary memory cache
512 kilobytes secondary memory cache
20 GB HDD
1 Gig MB RAM (2 512mb sticks)
Linksys Wireless-G Notebook Adapter WPC54G V3
CDRW/DVD Optical Drive
From the title of this post, you can see that I am having some trouble getting the Linksys Wireless-G broadcom card working. I have been doing some research and have heard that getting a broadcom card to work in Linux can be a real pain.
I have verified that Mint 10 recognized PCMCIA so I am good there. I installed Wifi-Radar to see if maybe it would recognize it but it did not.
When I type iwconfig, it does not show any wireless signals available. When I originally set up the partitions for this laptop, I used PartedMagic and was able to quickly set up the network on that with vertually no problem what so ever.
I've bought a Asus EEEpc 1005 PX and trired to install Ubuntu netbook. But I found that wifi is not working. It's not detecting the wifi cards.I tried ifconfig, and it is showing me,When I tried LSPCI it's showing me
Ethernet controller: Atheros Communications Atheros AR8132/L1c Gigabit ethernet adapter (rev c0)
Network Controller: Atheros Communication inc. Device 002c (rev 01)
how can i set up the wifi here.(I tried with Meego, and Meego detected the wireless autometically..But I want to use Ubuntu)
I have eventually (a week's work) got my Ubuntu 10.04 to recognise my Asus N13 WiFi dongle (had to compile the source from Ralink with the "y" against the two things it tells you to if you want network manager to work (source that came with dongle wouldn't compile) and then set up rules (for some reason the driver - rt2870sta - wouldn't recognise the dongle until the rule about the vendor and product ID was in place; and the drivers that come with Ubuntu wouldn't recognise it even with the rule in place)).
Big thank you to chilli555 for all of the posts that got me this far.I would like to use the Network Manager app that comes with Ubuntu, to control the dongle. At the moment it will aknowledge when the driver has been loaded (have to do a modprobe), but does not "see" any of the many WiFi routers around my house, so I can't click on one to select one.
My only guess on this is that, to get the dongle to work I copied the config file that is part of the driver source files into /etc/Wireless/RT2870, and this is getting in the way. However, I have tried removing it and the network manager still doesn't work. Or is it because the network manager needs the dongle to be called "wlan0" and it's called "ra0"? If so, can you aliase this?
I've got an Asus EEE 1000HE, and it's worked fine for a long time with the EEEBUNTU distro (a distro based on Jaunty (i think) with a custom kernel). Unfortunately, Eeebuntu is no longer maintained, so I recently did a clean install of Ubuntu 10.04.2. I am now unable to get my wifi to work reliably.
The wifi tries to connect for a while, then pops up the "Wireless Network Authentication Required" window. If I hit "connect" it will try again for a while, then pop up the window. Etc. Note I know that my connection information is OK. I haven't mistyped the password (see below). Also note that the wifi antenna is turned on. For example, iwlist scan is able to find my network.
There is a weird twist though: The netbook is always able to connect through an ethernet cable on eth0 just fine. If I boot the netbook with the ethernet cable plugged in, the wifi instantly connects as well! I can then unplug the ethernet cable (eth0 goes away), but I am still able to use the wifi connection for about 5 minutes before it disconnects, and goes back to trying and failing to connect.
This behavior is 100% replicable--the wifi always works fine (for about 5 minutes) if it boots with the ethernet cable plugged in. Very rarely, the wifi will also connect on boot without the ethernet cable, but that is not replicable.
Other EEE netbooks seem to have issues with multiple wireless drivers, like in this thread. Perhaps something similar is happening here? My card seems to be using rt2860sta as a driver. I tried blacklisting it, to see if another driver was trying to load instead, but that just negated my wifi altogether. (It's unblacklisted again)
My router is a very reliable Linksys WRT54GL with factory firmware which has never been flaky.
I'm at my wit's end. This netbook will be useless without wifi.
Below is the suggested information for a first post:
Here's lspci (note there is nothing listed as "Wireless Brand" to grep out):
Code:
lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
[Code]....
I cant seam to find out how to get my card to work i cant find out how to install the driver or finding the wifi card on the system.
View 9 Replies View Relatedget WIFI working on my Dell D600 with Ubuntu 11.04 freshly installed. I some limited sucched following the this post t=1621331 this got the card working but it was very very slow over 70% packet loss to the WIFIrouter. 1. Machine details Dell Latitude D6002 Wireless Broadband and Chip setlspci -nn | grep Broadcom - 02:03.0 Network controller [0280]: Broadcom Corporation BCM4309 802.11a/b/g [14e4:4324] (rev 02)3. Check interfaces
eth0 Link encap:Ethernet HWaddr 00:0b:db:e0:1c:5b
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
[code]...
Pinging out from my netbook (over wifi, to any host) gets ~0% packet loss. Pinging into it (from any host) gets about 50% packet loss.
The router is a Dlink-DIR615 (rev d, running DD-WRT v24-sp2) but all other hosts on it ping eachother fine. I've tried changing routing, disabling IPv6, using older kernels and using wicd, all with no luck. The wireless connections is at 100% most of the time. This could be a new problem with Maverick, but I may not have noticed it before. I believe this is causing web browsing to be really slow and causing SSH timeouts.
I haven't tried madwifi drivers or nsidwrapper yet.
Edit: just booted into Windows and it has the same problem. Could it be a hardware issue? Also tried with a static IP, with no change.
Strangely, a normal ping gets 50% packet loss, but ping -A gets < 1% loss.
Edit 2: no packet loss at all on eth0.
Code:
# uname -a
Linux hulbert-laptop 2.6.35-23-generic #36-Ubuntu SMP Tue Oct 26 17:03:18 UTC 2010 i686 GNU/Linux
Code:
# ifconfig wlan0
wlan0 Link encap:Ethernet HWaddr 00:25:d3:1a:bc:4b
inet addr:192.168.0.102 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::225:d3ff:fe1a:bc4b/64 Scope:Link
[Code]....
Just got a secondhand Asus EeePC 100P netbook, fresh install of Ubuntu 10.10, and while I can connect to my wireless network and access the router through the browser, I can't connect to the internet. Pinging any other sites, either by domain name or IP, doesn't work. I've tried various things suggested in similar threads (putting in the DNS server info manually, disabling ipv6, restarting about a gazillion times), but nothing's worked so far. (My other computer, a Mac, can connect just fine.)
Attempted to install ndiswrapper, failed miserably, and I'm not sure if that's just for situations where the wifi itself doesn't work?
I'd be very grateful for any suggestions.
Here's what's under Connection Information at the moment:Interface: 802.11 WiFi (wlan0)
Hardware Address: 1C:4B6:85:13:F4
Driver: ath9k
Speed: 1 Mb/s
Security: WEP
[Code].....
I am running (K)Ubuntu Lucid 10.04 64bit on a Dell Latitude E6400, WiFi Card Intel 5100. Never had any problems with networking. Up to about 2 weeks ago. I do realize there have been quite a few posts with this network adaptor, but non really described the problem I have here.
What happens is that suddenly the WiFi LED on the computer stops blinking, the WiFi connection gets disrupted, and the device is not recognized anymore when checking ifconfig. Only cold restarting the machine helps then... it will work for a while (between 1 and 20 minutes) and then crash again.
On Windows 7 the card works perfectly fine. With Ubuntu 11.04 in Live CD mode I have the same effects (connection crashes after a while). Also tried booting an older kernel, no success.
My exact hardware:
Code:
I notived the following problems in /var/log/kern.log
Code:
I have an Asus EEEpc 1000H netbook with both Ubuntu and WinXp. I just updated from Ubuntu 9.1 to 10.04 and I can no longer connect to my home WiFi!
I have a Netgear router and the network is WPA-PSK password protected. All other devices can perfectly connect. The netbook can under WinXp and could with Ubuntu 9.1. Now, with the 10.04, it keeps asking for the password but never connects. Obviously I triple checked the password and there's no chance of a mistype error.
So I decided to wipe out Windows and try Slitaz. It's an awesome well featured distro for it's size. One huge problem tho: I can't get wireless to work for the life of me. I actually went as far as to manually load the ath5k module but It just refuses to recognize my wireless router, much less any nearby routers. It simply doesn't see anything when it scans for wireless networks. I have no problem with that in Puppy Lucid. But I'd really like to use Slitaz, just for it's small size and quick bootup. Can anyone PLEASE help me with that?
PS: It happened here before that I had to plea and beg for any response, so PLEASE(!!) don't let me hang like that this time.
I need some help getting my wireless card working.I have a ASUS PCE-N13 and I'm running ubuntu 10.10 AMD64.I have confirmed that the card works running under win xp.The problem I have is that it can't see any available networks.I have downloaded and compile the latest driver from ASUS rt2860sta 2.1.0.0 and added these lines to the blacklist file.
blacklist rt2800pci
blacklist rt2800usb
blacklist rt2x00lib[code]...........
Moving this to new topic, since it's no longer under wireless connectivity issues. [Noob Warning] I was having trouble getting Ubuntu to recognize my wireless card, as I have changed from the 3965 that came in my computer to the 4965, which added increased range and G band. Anyway, I read one of the threads on here, and this was the advice given:
Quote:
Originally Posted by pytheas22 First, download this file and save it to your desktop. Then run these commands:
Code:
sudo apt-get install build-essential
wget http://intellinuxwireless.org/iwlwifi/downloads/iwlwifi-5000-ucode-5.4.A.11.tar.gz
tar -xzvf iwlwifi*
sudo cp iwlwifi-5000-ucode-5.4.A.11/iwlwifi-5000-1.ucode /lib/firmware
bunzip2 compat-wireless-old
[Code]...
Today I deleted Windows on my Dell Latitude D610 and instead installed Ubuntu 10.04 on it (I had a cd with 10.04 on it from when I installed it on my desktop a year ago). Everything runs fine except I can't get the wifi to work, and it won't recognize the driver either, actually it doesn't recognize any drivers.
View 4 Replies View Relatedi have installed centos 5.1 but it won't recognize 2nd nic card (eth1). i was unable to install the driver supplied by the cd. i am using intellinet gigabite pci network card. the network card recognize by centos 5.3 but i need to use centos 5.1. i also tried another intel gigabite adopter but it also won't recognize by centos 5.1.
View 2 Replies View RelatedJust put Ubuntu 10.10 on my Fujitsu Amilo Li1818 and it does not seem to recognise the wireless card. If I click on the network icon in the top bar there is no mention of wireless.
View 1 Replies View Relatedhaving problems with wireless on my old Asus A2500H laptop, NetworkManager applet keeps the "enable wireless" greyed out and gives a "Wireless is disabled" for each wirelss network card. The wireless cards in this laptop are:
Code:
00:0c.0 Network controller: Broadcom Corporation BCM4303 802.11b Wireless LAN Controller (rev 02)
02:00.0 Ethernet controller: Atheros Communications Inc. AR2413 802.11bg NIC (rev 01)
It does look like the network interface come up fine as well:
Code:
wlan0 IEEE 802.11b ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=off
[Code]....
Of course the easy solution would be to just flick that hardware switch on, however there isn't any hardware button only a indicator light, which is off unfortunately.
Any clues to get wifi up? Also tried another pcmcia card but same problem, card is recognized but still "Wireless is disabled".
I have used a wireless LAN PCI card for 3 years and now I want to switch back to the onboard wired LAN card but I cant get it to recognize and I have enabled it in BIOS also the wireless LAN card has been removed.Should I put it back in and then try to switch?
View 6 Replies View RelatedI had F14 up and running as a server working awesome. I shut it down and moved it. Now on start up, system doesn't seem to recognize my ethernet card...eth0. How to get my ethernet card back online?
View 14 Replies View RelatedUbuntu 9.04 running on a Dell C640 with a Dell TrueMobile 1150 wireless card. Works perfectly under XP. Ubuntu can't find it. Wired networking finds the internet perfectly (though I'm still working on getting samba set up correctly for file/print sharing on my XP LAN).
I'm thinking I need a driver, maybe? Can't seem to locate one.
i just thought the last few days about trying Ubuntu. so i did. i got a nice and fresh copy of Ubuntu Desktop version and installed it, everything worked great except my wireless usb 2.0 card. the only internet connection i have under windows is Wifi and i hoped that my dongle will be recognized by Ubuntu automatically...(naturally, it wasn't the case.)
so my adapter looks exactly like this one here, except for the color, it's white and it has my WISP's name written on it (i got it from them, along with a cd that offers win xp/98/me drivers...)
so even everest sees it's atheros and it's the Atheros AR5523 chipset.
i also have windows 7 64bit drivers if they help...
anyway, i can't get it to work and cannot access the internet any other way when on Ubuntu, so i have to use an already-saved driver..
I have been waiting on installing ubuntu on my mid 2010 MBP 15' for a while now. I was wondering if the dynamic GPU switching was supported yet. Does Ubuntu recognize the intel card and can I use it over the nVidia card?
View 1 Replies View Relatedi was wondering how to get the above wifi card working as it is not supported.
View 1 Replies View RelatedI have downloaded the driver installed it, and it works fine. But i can't get to turn it off. I do have the ability to unload the driver's kernel modules and the sysyem does not see my card after that. That's ok, but i'm thinking it still uses my battery power. The wifi led is always on no matter what i do. The fn+<wifi key> doesn't to anything.
View 8 Replies View Relatedi installed ubuntu on my friends laptop but when he tries to connect to his network and enters his wep key the box disappears for a few second and comes back again...The card is Atheros on a Toshiba laptop and it is detected , it finds the networks but the wep key is rejected every time without a error
View 5 Replies View RelatedI've just installed Ubuntu 10.04 on my old X30 alongside my fully working 8.04 and have strange wifi problems under 10.04 (under 8.04 it worked out of the box):
- no available networks are shown
- running "sudo iwlist scanning" results in "eth1
Interface doesn't support scanning : Device or resource busy"
- without any wireless configuration from my side I get this:
sudo iwconfig eth1
eth1 IEEE 802.11b ESSID:"gxC6isQxFFJxEC)xCDxBAxAB
xF2xFBxE3F|xC2TxF8x1BxE8xE7x8DvZ.c3x9FxC 9x9A"
Mode:Managed Frequency:2.467 GHz Access Point: None
Bit Rate:11 Mb/s Sensitivity:1/0
Retry short limit:8 RTS thrff Fragment thrff
Encryption keyff
Power Managementff
Link Quality=90/70 Signal level=-8 dBm Noise level=-147 dBm
Rx invalid nwid:0 Rx invalid crypt:63 Rx invalid frag:0
Tx excessive retries:1 Invalid misc:0 Missed beacon:0
A very strange ESSID there appearing out of nowhere...
This is the issue, and I have had this happen with a few card readers. I have a Alfa Usb Wifi adapter model number AWUS036H using the rtl8187 Chipset. It works fine, unless I plug in my flash card reader directly to the board. If I plug it in to a hub it works fine until I put a card in, I was also having the same issues using a USB Video Capture unit by the name of EASYCAP. This was also happening in XP. Must be some driver conflict of sorts.
View 1 Replies View Related