Fedora X86/64bit :: F12 Locking Up On Boot
Nov 19, 2009
I added the rpmfusion repos so that I could install the nvidia drivers and downloaded whatever updates appeared. Initially after rebooting, I kept getting "No root device found" which I've managed to solve but now it keeps locking up after "Starting atd". That actually manages to load and then it locks so I'm guessing that it's "S99livesys" that is causing the problem.From googling, this appear to be a problem with certain kernels and can be resolved by either using an older kernel image or turning the process off in the command line. My problem is that this was a fresh install so there's only one kernel image so it's impossible for me to use a different one. For the same reason, I can't get into the command line.
Is there anyway to get around this without re-installing?I don't want to have the same issue if I re-install?Can I download the kernel images and just place them in /boot?
View 2 Replies
ADVERTISEMENT
Jul 5, 2011
i just upgraded from f14 to 15 the installation was successful but when i boot it bugs and dont start ...it stops here HTML Code:
Starting LSB : an anonymizing overlay network for tcp failed , see 'systemclt status tor.service' for details
Started lsb : install coredump handler wish saves segfault data
[code]....
View 7 Replies
View Related
Aug 27, 2011
I am running it on a Dell PowerEdge 300 and am having all kinds of problems. First problem was that the second NIC will not start at boot. I have to manually start it every time I re-boot.
Ok, so I set up SSH and no mater what I do, it too will not start at boot time. Same with Apache and vnc.
So I use it as a development platform with eclipse. I have my Laptop running 14 32 bit and it was a dream. This eclipse install was a pain from the get go. Now I cannot get the debugger to consistently run no mater what I do. It will run for a bit then the next time I try it will not start. Very strange.
PHP is also a problem. None of the mysql functions work. Yes I loaded the mysql libs but still no luck.
Think I;ll go back to the 32bit 14 and stick with it for a while unless someone has some good suggestions on how to get it running smoothly.
View 8 Replies
View Related
Aug 10, 2009
I need to create a dual boot system consisting of 32 bit Fedora 9 and 64 bit Fedora 9, but I'm unable to go about it. How exactly should I do it?
View 5 Replies
View Related
Sep 24, 2010
Yesterday i updated fedora 13.After reboot problems started with te display driver.Scrolling sreens goes very slow and with little steps.Moving a screen from one side to the other goes also very slow.It seems there is a problem with the ATI driver.I also have problems after new kernel updates.The new kernels simply won't boot? The boot proces hangs everytime the fedora logo turns wite.
View 2 Replies
View Related
Jun 6, 2011
I try install F14 32 bit, f14 64 bit, f15 32 bit and Centos 5.5 and when it arrives at the end of the installation and reboot, my system no boot. I try install it on a Hardware RAID 1 --> 2 x 2TB. Motherboard Intel DH57DD, Core I5, 4 Gb DD3. (Windows 7 afeter install boot OK).
View 13 Replies
View Related
Mar 29, 2009
I have done a fresh text-only installation of Fedora 10 on a Dell Dimension E521 for the purpose of setting up a server. After installation I ran yum update to bring the system up to date. After the update, I rebooted the computer, but the boot process froze. I recycled power and pressed "I" after the Dell BIOS screen and the GRUB bootloader appeared. I selected the most current version, edited the kernel line by deleting "rhgb quiet" and replacing it with "3." After making this change, I continued with the boot and the computer stopped at "Starting udev:" I have two fedora 10 revisions showing in the GRUB bootloader, the original installation and the update after running yum.
I repeatedly tried rebooting both versions and, after about 30 attempts, the computer finished booting and got me to the command prompt. Reading through the forums indicated there might be some issue with my nVidia GeForce 6150 onboard video and fedora 10. So, when I got to the command prompt, I followed the instructions in the forums [URL] to load the rpmfusion drivers. This appeared to be successful and when I looked at /etc/X11/xorg.conf it appeared to be correct for the new nVidia drivers. After loading these new drivers I tried rebooting. Unfortunately, I have been trying now over and over to get back to the command prompt, but simply can't get past "Starting udev."
View 13 Replies
View Related
Mar 29, 2009
Ive loaded 64studio (hda6) grub in MBR, and fed10 grub on its partition (hda8), but from Studio it seems i cant Mount fed10 files to look at the Kernel path from MBR. (studio did not auto pick it up, like it did for Mandriva on hda7)
Does anyone know what it is ? something like kernel /boot/vmlinuz.....and Initrd(hd0,7)/boot.initrd.img .....then i can Edit menu.Lst in MBR grub.
View 4 Replies
View Related
Apr 26, 2009
Just did the most recent set of updates late yesterday (kernel and Nvidia). Since the update I cannot get to a login screen - just blinking cursor. In fact the cursor blinks for a bit then disapears only to reappear as if there are repeated attempts to complete a process unsuccessfully.
The update replaced the xorg.conf. I tied a couple of revisions, inlcuding replacing it with the earlier working xorg.conf. No luck.
Hardware is MSI K9N6GM board with Nvidia Geforce 6100 nforce 430.
View 5 Replies
View Related
Jun 22, 2009
Machine Specs: Asus P5B Deluxe w/ Intel Core 2 Duo E8400, 8gigs of ram and an Asus GeForce 8400 GS. I downloaded and installed the x86_64 DVD Installation disc for Fedora 11 the day of the release. I allowed the installer to utilize 100% of the disk with the default partition configuration. I only installed KDE.
Upon first boot the machine didn't boot in under 20 seconds, but it wasn't slow enough to give it any though. Once logged in, everything ran great. The system has been running great since the launch date. I rebooted once or twice since them and thought the same thing as the first boot, not particularly fast, but not slow enough to care.
This morning I rebooted and it almost seemed broken. It takes about 20 minutes to get past the loading bar, and way too much time to log in. When the loading bar is going I hit escape. It looked like "Starting system message bus" took the longest, but it wasn't the only slow thing. After some more time, the background for the log in prompt appeared. Once the log in prompt fully appeared I mistyped my password. It took a good four minutes to authenticate unsuccessfully. I reentered my information correctly. It took another four minutes for the prompt to disappear, then it continued to load very slowly.
View 12 Replies
View Related
Dec 3, 2009
I have installed last updates about 3 days ago. After this Fedora kernel 2.6.30.9-99.fc11.x86_64 does not start.booting it the last message I see"ADDRCONF(NETDEV_UP):wlan0: link is not ready" then it stops. I have to boot with a previous kernel version 2.6.30.9-96.fc11.x86_64.
View 2 Replies
View Related
Aug 25, 2010
I just recently notice that my Fedora 13 is randomly stop at boot. This is a fresh install less than a week and with all the updated kernel and software as of today. I could not get much information from /var/log/messages (only about 3 lines at the time it froze).
It froze straight after it finishes the boot sequence. I can see a mouse cursor but that's about it. The last init sequence I could see before going to X was "atd" (if that helps at all)
This install is on a single Seagate 1.5TB drive without any other drives attached to the system (I rule out if that's problem with the other hard drives)
on Gigabyte P35DS3 mobo on ICH9 port
the mobo has AHCI mode for the hard drive
I got some bad sector on the hard drive (40 sectors)
For some reason, it kept stopping when I cold boot. Once it stop and I press the reset button it normally works.
I found another forum mentioning it can be issue with the video driver. So I here's further information of my system code...
View 7 Replies
View Related
Oct 17, 2010
I've downloaded 2.6.36-rc8 vanilla kernel, then I copied .config file from my current working kernel 2.6.32.21-168.fc12.x86_64, then I've configured, compiled and installed kernel like this:
Code:
make gconfig
make -j4 all (or make all)
make modules_all
make install
The last command edits my grub.conf file and writes this:
[Code]....
I checked my .config and ACPI, and File Systems are built into kernel and not loaded as modules... And, I have LVM but my /boot partition isn't in it, so I don't HAVE to use initrd, right? How can I boot from a vanilla kernel without initrd ?
View 11 Replies
View Related
Feb 11, 2011
I am unable to boot my Fedora 14 after last nights kernel update. When I start the boot up and hit F2 the system fails after outputting the line : Starting vservers of type 'default'. At some point the console displays an error message :
serial8250 : Too much work for irq17
How do I restore my previous version? I know some people have suggested in the past - just modify the grub.conf but how? When I boot off the cd I only get access to the liveuser disk. I need to have access to my own /boot/grub/grub.conf file.
View 14 Replies
View Related
May 4, 2011
Last night I wanted to test the suspend mode on my laptop (Asus K52J) after I had successfully used hibernation mode, which did not work until I installed the latest kernel update. Unfortunately, it didn't go very well. I had to power off the laptop manually. This morning, I booted up Fedora but it didn't go beyond the blue screen with the logo. It just kept hanging there. I rebooted and tried previous kernel configurations but none of them worked. As a matter of fact, I have to write this from Windows.
This is all rather odd since I tried to suspend before and though it never worked, the fact that I had to power off the laptop manually didn't prevent Fedora from booting. I really hate not being able to use Fedora. It's fortunate that I put all my important data on a separate NTFS partition...
View 3 Replies
View Related
Aug 12, 2011
Just started happening this week -- I boot into a terminal (no GUI by default, but I use GNOME when I need it), and when I'm asked to login, I type my username <ENTER>, then I'm prompted for my password...
And the password is now echoed to the screen in cleartext. as I type it
Haven't changed any settings (although I have been keeping up with the updates).
I've searched the forums, and the occasional new user will complain nothing shows up in the PW field which is the expected behavior. Unfortunately, I have the opposite behavior -- something shows up, and I don't want it.
View 2 Replies
View Related
Jul 25, 2010
Last time I want to run to fedora(14/64-bit), I faced to an error! I have a screenshot from monitor and attached it here I want to save my data on desktop
View 3 Replies
View Related
May 9, 2009
I have been using for over a year now, my 64-bit computer first with Fedora 8 and now with Fedora 10 with 2Gb of RAM just fine. Today I purchased an extra 2Gb for the system and upon installation from the GRUB screen Fedora 10 simply won't boot. It does boot with 3Gb, and it doesn't matter which stick I use for the 3Gb configuration, or what slot do I put the sticks into the motherboard, however if I place the four sticks, F10 simply won't boot. Should I pass a command line argument tot he kernel? If so, which?
View 11 Replies
View Related
Aug 19, 2009
I was finally able to install Fedora 11 x64 after choosing to only install packages from the repository on the install DVD. Prior to that when I had chosen tio install from the default online repositories, the install itself failed with a Python exception ( see my other post ). Now, however, once I boot after the install I eventually receive a kernel panic message, and failure. The exact same thing happened with CentOS 5.3 x64 after a flawless install. So unless someone knows what might be going on I will assume that Fedore, Red hat, and offshoots for x64 bit systems are just not for me. I have been able to successfully install the latest Mandriva and SUSE x64 Linux distros so whatever Red Hat/Fedora has done just does not work on my system.
View 3 Replies
View Related
Feb 15, 2010
New install of Fedora 12 64-bit from DVD on an Optiplex 740 (AMD) with 8GB memory I had to use the mem= option to get the install past the EDD probe, but it seemed to install successfully. Now on boot it goes all the way through the "filling icon" progress meter, then switches to a completely black screen with an X pointer cursor that responds to mouse movement, but nothing else happens. Ctrl-Alt-F{2-5} do not switch to a console login, so the system's inaccessible.
View 10 Replies
View Related
Jun 1, 2010
I got a new laptop, this is the one: [URL] and decided that I wanted to go with Fedora instead of Ubuntu with this computer. The laptop runs win 7 64 bit so I'm trying to go with Fedora 64 but it will not boot. I first installed Fedora 12 64 bit from the DVD install and it would go to grub fine but when I boot the fedora os It just stops in the middle of the boot script. When it stops, the last 4 lines are:
kernel_init=0x1fd/0x257
child_rip+0xa/0x20
? kernel_init+0x0/0x257
? child_rip+0x0/x20
I hadn't messed with it for a few weeks and yesterday I saw that 13 was out, so I downloaded and burnt the Fedora 13 64 bit CD. I popped it in, booted the computer and it did the same crap. It didn't stop at the same line but it was around a line with:
? kernel_init
So I guess the kernel isn't loading properly or something. Do ya'll think I would be better off using the 32 bit?
View 4 Replies
View Related
Jul 28, 2011
iam new to linux i installed fedora 10 on windows7 ultimate 64bit after intallation the fedora system doesent boot, but windows7 work properly. i instlled fedora 10 in seperate fee partiotion
View 2 Replies
View Related
Nov 22, 2009
I'm running a dual partitioned (Vista / Fedora 11 x86_64) Intel X25-M Mainstream SSD.
Whilst Vista boots in about 15 seconds, Fedora takes around twice as long; in fact far longer than Fedora 9 on my old Western Digital Raptor drive.
Is this to be expected, or might I have some sort of configuration problem? Has anyone else had similar experiences?
View 10 Replies
View Related
Jun 2, 2011
I've recently installed F15 on my old thinkpad X41 to give it a go after sticking to ubuntu for quite a bunch of years now.
Somehow there seems to be a problem with the installation tho: the screen freezes up (as does the keyboard) after a while using it - not many programs open, a couple of workspaces enabled, no memory or CPU stress whatsoever - and all i'm left with is a moving mouse cursor. Ctrl + alt + F2 doesn't work and the only solution is to restart the laptop again.
Tried the fallback mode and same thing still happens, so maybe its not a graphic card issue.
View 1 Replies
View Related
Jun 23, 2011
My computer keep locking up when I try to open a new tab in Google Chrome. It locks up when I do other stuff too but it does not stay locked up. When it gets locked up from Chrome I have to fix it by doing Ctrl + Alt + Backspace. It only happens sometimes though. I can open new tabs sometimes without it locking up. I know it has something to do with my graphics driver (I have an ati). When it locks up I can't do anything and then like 10 seconds later I can move my mouse but that's it, everything else is still frozen. That's when I do Ctrl + Alt + Backspace. Here is what the messages log file says:
Quote:
Jun 22 17:47:31 hostname kernel: [12767.018056] radeon 0000:01:00.0: GPU lockup CP stall for more than 10000msec
Jun 22 17:47:31 hostname kernel: [12767.018058] ------------[ cut here ]------------
[Code].....
I changed the real host name of my computer to hostname.
View 1 Replies
View Related
Jun 2, 2010
I'm happily running Fedora 13 as a guest OS in VMWare 3.0.1, except that it has one little issue.Sometimes the mouse would get terribly confused. It generally happens when I hit the mouse scroll wheel or when I move a window around very quickly. After that the left mouse button would stop working...
Anyway I found an easy workaround which I thought I'd share.Just hit 'enter unity' on the VMWare player menu. Then you can immediately exit unity again. This somehow resets the mouse into its normal state...
View 12 Replies
View Related
Feb 16, 2011
I am trying to install skype on a 64bit Fc14 and the 32bit doesn't work.
View 8 Replies
View Related
Dec 8, 2009
Just got the latest kernel update 2.6.31.6-162 for fedora 12 64bit and it won't boot on my PC. I just get a black screen with some text that doesn't mean anything to me. Computer is a s775 E7200 with nvidia 730i/9300 integrated graphics. I am NOT using hardware graphics drivers at the moment, having decided to stick with Nouveau drivers for a time. What system log tools do I need to identify the problem?
View 2 Replies
View Related
Mar 8, 2010
I need file locking software or command for my project
View 1 Replies
View Related
Jun 7, 2010
I upgraded from F12 i686 to F13 (I should say clean install). And now ever so often my computer locks up...... I will wait for an update or something this week but if it continues after I may have to go back to F12 (on another HDD)
View 10 Replies
View Related
