Fedora Installation :: F11 Kernel 217 Won't Boot After Update / Resolve This?
Aug 23, 2009
I have recently updated my Fedora 11 installation which replaced my older 167 kernel with the newer 217 kernel. However, the 217 kernel will not boot completely. It will show the splash loading screen, and then will switch to a rapidly blinking cursor. This cursor blinks for about 5 seconds and then disappears. I can access terminals using ALT+F2, etc. I can log in to these terminals, but init commands do not complete (something about a binary handler). I'm not sure if something is conflicting with an update to X or what is wrong. The most recent kernel that I managed to get to work was Kernel 167, however I cannot find this kernel for download.
Sys info:
AMD Athlon 64 X2 4800+
3GB RAM
nVidia GeForce 8600GT with proprietary drivers
320GB Hard Disk with windows and linux partitions
Fedora 11 32-bit i586
View 2 Replies
ADVERTISEMENT
Jul 14, 2009
I just updated my kernel to kernel-2.6.29.5-191.fc11.x86_64 on my x64 system, after I reboot my machine, the Fedora loading bar comes up and finishes but then no gui comes up. I attempt to issue commands at the hanging prompt that comes up but nothing happens. I can boot into my older kernel just fine but not the updated one.
What can I do?
View 3 Replies
View Related
Jul 1, 2010
I've just updated (through Update Manager) to the latest Linux kernel, (2.6.32-23, I believe) and now Ubuntu will not boot to the desktop.
It gets as far as finishing fsck on all of the drives, and successfully completes checks if necessary, but after that it just comes to a halt and won't proceed any further.
The last messages on screen when it freezes are (ignoring the fsck success reports):
init: ureadahead-other main process (954) terminated with status 4
init: ureadahead-other main process (959) terminated with status 4
init: ureadahead-other main process (970) terminated with status 4
These messages were appearing before, though.
The only way I seem to be able to boot now is by selecting the previous kernel (2.6.32-22) in GRUB.
Is anyone else seeing this, and does anyone know how to fix this Ubuntu update problem?
View 8 Replies
View Related
Apr 12, 2011
Hello, i recently update the kernel in fedora through the GUI update manager and after restarting the new kernel wouldn't boot and i had to reboot into the old one. it freezes right after Plymouth finishes and the login screen should show up it just completely freezes, i do have proprietary nvidia drivers could it be that?
View 9 Replies
View Related
Feb 23, 2010
Finally updates are broken - I've been able to use my upgraded F12 system for some time, faithfully keeping up with f10, then f11. Just yesterday it finally broke:
Test Transaction Errors: installing package kernel-2.6.31.12-174.2.22.fc12.i686 needs 10MB on the /boot filesystem
It would appear that the most recent kernel update has broken the 10MB barrier initially set by the version I first installed (for the boot partition). Needless to say, I have quite an investment in this machine, and of course no time to back it all up and do a fresh F12 install. I am hoping someone out there can give me a bulletproof way to steal some space and expand the boot partition...
View 4 Replies
View Related
Dec 22, 2010
Cant boot windows or ubuntu
Well i have two hard drives, i used wubi on windows (which is on my c: drive) to put ubuntu 10.10 on my d: drive. Everything was running smoothly until the update manager uptated ubuntu. When the installation was completed, i was told to restart. So i did. When it restarted, nothing happened. My computer froze and i cant access windows or ubuntu, and i cant change anything.
View 2 Replies
View Related
Jan 21, 2010
I am trying to install Fedora12 on a usb hard-drive, the first problem I encountered was that the hard-drive would not boot stating "kernel panic: unable to create root device", this is just using the standard fedora 12 install and mostly clicking next (although I add my vista to the grub and tell grub to install to /dev/sdc which is the location of my usb hdd).
I have also tried livecdtousb (wont boot in stick and wont recognize removable hd as removable)
I have tried setting up disc encryption and installing with no LVM.
The drive has this same problem with ubuntu 9.10 however ubuntu 8.10 installs perfectly and I am guessing earlier versions of fedora will too. The problem is that I would like the kernel features of Fedora 12 (mainly modesetting) without this issue.
I have played about with grub and quite like disabling LVM and using the uuid of the drive to select the root partition, my boot partition has 500mb, I have a 2gb swap space 50gb ext4 root partition & 27gb fat32 partition code...
View 4 Replies
View Related
May 31, 2010
I've just updated my desktop to F13 using preupgrade but now grub won't boot it. The upgrade seemed to go OK, and none of the disk partitions should have changed as far as I'm aware, but now I get an error
VFS: Cannot open root device "UUID=xxx" or unknown block(0,0).
View 1 Replies
View Related
Feb 8, 2010
Update manager reported some updates including kernel update to version 2.6.31-19.
after update system won't boot. it crashes into bash shell. I've manually loaded kernel version 16 with following command code...
same thing happened when version 17 came up. I definitely NEVER again going to update kernel. What do I need to do now? should I uninstall latest kernel...if that is possible?
View 2 Replies
View Related
Oct 29, 2010
After getting everything running nicely on 10.10 (after dozens of installs - long story, partially raid problem, partially noob, partially partitioning and Windows), I'm stuck with an unbootable 10.10.I selected all the "important security updates" when the update manager told me I needed to update everything. Upon rebooting, and picking ubuntu in grub, I get:
Error: unknown command 'record fail'Error: cannot read the Linux header Error: you need to load the kernel first Not exactly sure why at this point. Can anyone point me in the right direction? I can probably get in either through a 10.04 version that I have on another HDD, or through the livecd.
Note: if it's important, I did not elect to install the ATI proprietary drivers, and this is also the first update that I've done after installing medibuntu - a few boot cycles in between, so I don't think it's related.
View 5 Replies
View Related
Mar 25, 2011
After a kernel update ubuntu would not boot. So found this procedure using the live update cd. Update grub.cfg & delete everything down to but not including the first line that starts with 'menuentry' . Then boot works ok. A couple of weeks ago it started on my notebook. Is anyone @ hq listening & able to fix this problem permanently?
View 9 Replies
View Related
Aug 10, 2009
The girlfriend did an update a few nights ago. Besides removing her NVidia drivers, it also installed kernel version 2.6.27.29-170.2.78.fc10.i686.
That kernel was causing problems. Now it won't boot at all. How do we remove that kernel altogether?
If we remove it, would simply doing another update from the previous (still working) kernel just try to reinstall that bad kernel?
View 12 Replies
View Related
Jan 21, 2010
I've run today command: "sudo yum update"
and I've noticed that the new kermel have been installed (2.6.31.12-174.2.3.fc12.x86_64).
After that installation .. my camputer has several errors while booting and it doesn't want to start. So while booting I can see Code...
View 7 Replies
View Related
Aug 4, 2010
I ran the update through yum (replicated results twice) and whenever I boot to the new kernel it either freezes on the F logo or screen goes black right after f logo. No commands work whatsoever (tried em all). I can boot to an older kernel (2.6.33.3-85.fc13.x86_64). the ones that fail are: 2.6.33.6-147.fc13.x86_64 and 2.6.33.6-147.2.4.fc13.x86_64.
The Fedora error system gave me a bug report I submitted, here's what I got:
Package: kernel
Latest Crash:Tue 03 Aug 2010 09:46:33 PM
Command: not_applicable
Reason: BUG: unable to handle kernel NULL pointer dereference at 00000000000005b8
Bug Reports:Kernel oops report was uploaded
View 14 Replies
View Related
Nov 15, 2010
After updating my kernel from 2.6.34.7-56.fc13.i686 to 2.6.34.7-61.fc13.i686 I can't boot anymore. The error message says: "No root device found Boot has failed, sleeping forever."
I'm booting from 2.6.34.7-56.fc13.i686 now but I would like to sort this thing out. What should I do? File a bug? I never did that, so I don't know where to go.
View 5 Replies
View Related
Dec 19, 2010
After running update last night from 2.6.35.9-64 to 2.6.35.10-68 my laptop fails to start. Boot process goes most of the way to startup and then hangs just before login screen. Not sure what else to give as far as info.
View 12 Replies
View Related
Jan 16, 2009
I'm new to these forums. I'm coming from using Ubuntu for a couple of years and now I'm trying to switch to Fedora.
I installed F10 yesterday and all went well, more or less. The system used to freeze randomly but after updating, everything seemed to work fine (I haven't tried audio yet, though).
I have an X1250 integrated graphics system that's working fine in Ubuntu. After playing around with F10 for a while I decided to download and install the latest ATI drivers from AMD's site. The installation posed no problems, but when I reboot the system it will come to a black screen at some point and freeze there.
I searched the web a little and came to this: http://www.fedorafaq.org/#radeon, but I'm not sure if that's current or old news. If it's current and those ATI drivers can't be installed, I'd appreciate some help about removing them.
View 9 Replies
View Related
Aug 6, 2010
I am a linux newbie.
I had dual boot fedora 9 with windows XP before. Now I decided to change to fedora 11. I choose the option Replace existing linux while installing the fedora 11. My windows used to be in C drive while my linus in D drive. So I thought it would replace the D drive and remain dual boot.
However, after I reboot the computer, I realize that it can only boot linux. My windows partition appear as a File System in linux. code...
View 1 Replies
View Related
Jan 9, 2010
I used the update manager to update the kernel and whatever the other recommended updates were yesterday. I shut the computer down overnight and now when i try to boot into Ubuntu 9.10 i get a basic grub shell and when i try commands like "boot" it tells me there is no kernel loaded. I installed Ubuntu with Wubi so it is a dual boot system.
I've tried to access the Linux volume with a live OpenSuse 11 CD but there is no device to mount. It sees the entire hard-drive as if it hasn't been partitioned. I don't necessarily need to fix the installation. I just need to get my files back.
View 9 Replies
View Related
Dec 1, 2009
I tried to update my f12 today. In the list it showed an update for kernel-2.6.31.6-145.fc12.x86_64 It all seemed to go OK but when I restated my computer it spit up an error and wouldn't boot"Could not load /lib/modules/2.6.31.6-145.f12.x86_64/modules.dep: No such file or directory"Luckily the old kernel still works.
I do have the disk encryption set, could this be related to that? Updated my laptop today with the xx.6-145.f12.PAE kernel and now it's borked to. Same problems.12/07/2009OK today's kernel update seemedto fix the problems and now all is well, execpt for my inkscape not working problem. But I put ubuntu 9.10 in a VBox and it works. So for now that's my work around.
View 14 Replies
View Related
Feb 11, 2011
I am unable to boot my Fedora 14 after last nights kernel update. When I start the boot up and hit F2 the system fails after outputting the line : Starting vservers of type 'default'. At some point the console displays an error message :
serial8250 : Too much work for irq17
How do I restore my previous version? I know some people have suggested in the past - just modify the grub.conf but how? When I boot off the cd I only get access to the liveuser disk. I need to have access to my own /boot/grub/grub.conf file.
View 14 Replies
View Related
Jun 16, 2011
I upgraded the kernel of my machine with a yum update, and now it will not boot. I am running Fedora 14 on a 64 bit machine. I really really need it to boot. Help!
I did Ctrl+Alt+F2 and managed to log in. I have kernel x86_64 2.6.35.12-90.fc14 installed. How do I log in as usual? I never get to a login screen.
View 4 Replies
View Related
Jul 12, 2011
I have just updated my kernel to version 2.6.38.8-35 in Fedora 15, it now refuses to boot that kernel. I just get a lot of text on the screen and nothing happens. I can ctrl-alt-fn to get to a prompt, but I do not know how to fix the nvidia problem.
When I edit Xorg.conf and replace 'nvidia' with 'nv' the new kernel boots but only to fallback mode, trying to then re-install the nvidia drivers shows them to be already installed and I can get no further.
View 13 Replies
View Related
Mar 14, 2010
Dual Boot: Fedora 12 and XP Dell 505I've had trouble with the latest kernel update.I updated a bunch of packages recently (including Xorg and kernel), and noticed a severe flickering after the update on my center monitor (Samsung T260 - the laptop display did not exhibit the flickering behavior). I backed out all the changes and started updating package by package. After I updated the kernel (again) I rebooted and here's where the fun part is -
I no longer get anything, except the cursor. No grub menu, no grub prompt. I rebooted and ran the rescue disk and followed the procedurery and point grub at the right boot partition - see here. However (obviously or I wouldn't be posting) that failed to work. I still get a blinking cursor and dead system on boot up.
View 9 Replies
View Related
Nov 26, 2009
It appears that I have really messed up my machine. I was trying to get matlab working on FC 11 and I ran into libc.so.6 issues, so I put an older file libc.2.3.1.so in /lib/tls/ directory and created a symbolic link libc.so.6 to see if the application would work. Unfortunately at the same time the system did some updates and the system hung, so I ended up rebooting, but now it gets stuck at boot screen (after grub) with a kernel panic - not syncing: attempted to kill init.I just need a way to get to the directror /lib/tls and delete the link and the older .so file I threw in there. How do I get this accomplished. I cannot get even to a shell from the boot screen.
View 3 Replies
View Related
Jul 19, 2010
Since doing the update which included kernel "2.6.32.16-141 fc12-i686 PAE" I can no longer boot into my usual 1280x960 desktop. I can set it using NVidia settings but even though this offers to modify xorg.conf it fails to do so. I have tried running as root and it doesn't then give an error message but when I look at xorg. conf there is no section.showing any specific screen size. It worked ok before the update. In case it is relevant the video card is a Quadro FX1400 with KDE. Also the whole program seems rather unstable since the update.
View 10 Replies
View Related
Sep 4, 2010
I have a problem with the kernel update to 2.6.34.6. Up until 2.6.33.x my system boots fine, but with this update the boot stops at the moment that the mouse cursor should become visible. To resolve the problem, I've gone back to 2.6.33.x and removed the 2.6.34 kernel but I wonder what happens with the next kernel update.
Anyone else having this problem?
View 8 Replies
View Related
Mar 24, 2010
I'm not sure what caused it, but it happened right after running 'yum update'. It may be because it installed a new kernel, and there are now two kernels listed in my grub.conf and at boot; 2.6.31 and 2.6.32. System boots through a list of things it's starting up and stalls out at ATL or ADL or ADM maybe. It hangs there for a minute or so then flickers. This happens every time at boot. It's a bit difficult to post more information since I can't get past that part of the boot process, and I can't seem to be able to skip it either. It may be worth mentioning that this is a mini-itx motherboard. Intel Atom 330 1.6, 2GB DDR2, onboard GeForce 9400m. It's a zotac ionitx-a-u. I've installed a fresh copy of Fedora 12 lxde.
View 3 Replies
View Related
Feb 11, 2010
I use a pretty fresh installed RHEL 5.4, which should be very similar to Fedora. After the basic installation I installed xen and xen-kernel via yum with no errors. I can select the xen-kernel at boot time. But after booting the normal kernel shows up.
[root@noname boot]# uname -r
2.6.18-164.11.1.el5
My /boot/grub/menu.lst looks like:
default=1
timeout=5
splashimage=(hd0,0)/grub/splash.xpm.gz
[code]....
I can't see anything wrong and I did not change/try anything.
View 11 Replies
View Related
May 13, 2011
I am using DEBIAN 6.0 and I wannna update my kernel from 2.6.32 to 2.6.38. Every time, I do it but after the installation & rebooting into the new kernel it gives me error "UNABLE TO BOOT INTO THE KERNEL".
View 1 Replies
View Related
