Fedora Hardware :: HP Printer - HPLIP Driver In The Repo Doesn't Work Correctly
Apr 22, 2010
I recently had problems with my HP printer in Fedora 12, where as I never had a problem with it in any other distrubution.... For some reason, the HPLIP driver in the repo doesn't work correctly... I don't know why... but I kept getting errors with "error: Printer queue setup failed. Please restart CUPS and try again."
I tried every suggestion I found... which was installing extra dependencies, disabling firewall, disabling SELinux and a whole bunch of other stuff... but nothing worked... THEN finally I decided to use the HPLIP driver from the HP website... it was a .run file... and I executed it, and my printer has worked perfect eversince..... my question is.... has anybody successfully installed their hp printer from the hplip driver in the repo's..??? I don't know why it didn't work for me, and i've seen other fedora users complain of the same thing? maybe theres something wrong with the package? or its not pulling in a needed dependency? I don't know...
View 2 Replies
ADVERTISEMENT
Jun 14, 2009
I did an upgrade using preupgrade program and it went very well. However, I have lost my HP 1020 printer. Can anyone assist with this. I tried to use HPLIP-Gui, but it doesn't even see the printer at all. The other problem is that I get the following message when trying to use Yumex:
Failure getting http://rpm.livna.org/fedora/11/i386/...ta/repomd.xml:
13:09:06 : --> [Errno 14] HTTP Error 404: Not Found
13:09:06 : Trying other mirror.
13:09:06 : Failure getting http://livna.cat.pdx.edu/fedora/11/i...ta/repomd.xml:
[Code].....
View 11 Replies
View Related
Nov 4, 2009
I have Ubuntu 9.04, and a HP laserjet 1018 printer.
I install the printer using:
And when it ask me about plugin I give the path to it. (the 3.9.2 version of the plugin, because Ubuntu 9.04 has the 3.9.2 version of hplip)
well I install the printer, everything works perfectly. .... but, when I turn off the PC, and turn it on again, the printer does NOT work!, I send work for being printed but mothing happens , Ubuntu tells me that the job was printed but ... no case, my printer does not print it. I have to install it again since cero. what can I don to stop install it every time I turn off the computer ?
View 1 Replies
View Related
Jan 27, 2011
I'm running Ubuntu 9.10. The Update Manager did an update to HPLIP, the Hewlett Packard Linux Internet Printing software, one or two days ago. When I went to print today, the HP Officejet 4500 printer showed up in Open Office when my mouse pointed to the printer icon. But, the printer wouldn't work. Then I noticed that the HPLIP Toolbox icon was moved from the Applications - Accessoires folder, to the System - Preferences folder. I reinstalled all the HPLIP software, using the Synaptic Package Manager. When I click on the HPLIP Toolbox & run the HP Device Manager, it says "No Installed HP Devices Found".I was a little surprised to see the software upgrade caused the HPLIP toolbox to move fromhe Applications folder to the System folder. Because of this, I suspect there may be a bug in the upgraded software? Is anyone else having this problem?
View 1 Replies
View Related
Jun 11, 2011
I have ubuntu jaunty 9.04 installed in my system(thats my only OS.. no dual boot). When I tried to install hplip to enable hp printer driver, I understood that 9.04 is obsolete and no more support for it. I want to upgrade now. Update manager shows '10.04' for uogradation but it seems I cannot jump from 9.04 to 10.04 without getting into 9.10.
View 2 Replies
View Related
Feb 15, 2010
Deskjet-F4400-series
--------------------
Type: Unknown
Installed in HPLIP?: No, not using the hp: or hpfax: CUPS backend.
Device URI: usb://HP/Deskjet%20F4400%20series?serial=CN9C1CK70705C5
PPD: /etc/cups/ppd/Deskjet-F4400-series.ppd
[code]....
how do I get the printer installed in hplip? I can print but cannot scan. xsane will not recognize printer. Jaunty 64bit 2GB Ram 350GB HD
View 1 Replies
View Related
Dec 5, 2009
after an update to 11.2 (from 11.1), 64 bit, I don't get the printer to work. I reinstalled the driver and checked in cups: it says that the printer is available and waiting for a job. When I send something to the printer, nothing happens. The priont job will be stopped immediately. The printer is properly connected: xsane finds the scanner, that is part of the printer, without a problem. The printer is also ok: I can copy documents, it just works fine.
[Code]...
View 9 Replies
View Related
Oct 15, 2009
I installed a LPT1 printer a hp office jet T65 to add this printer was requested hplip I install the software that should de printer driver, when I print a file the file remain only in processing it wont go forwarder then that.I hope I was explicitly enough.
View 3 Replies
View Related
Jun 3, 2011
This post is for an HP parallel printer but I think it should work for at least "some" other parallel printers.I am sure that someone smarter than me will follow up this post with a "well, just do this and that" and you will have your HP Laserjet 6P printer ready to go, but since questions litter the forums of MANY distros on how to get "at least" an HP parallel printer to work, I'll post this anyway.This may or may not work for you if you do not have an HP but you can try it.The install printer box will let you do an install for an HP Parallel and it asks for how it is to talk to it, through CUPS sock or "local host'. When we get through what I recommend you should chose "local host".
View 2 Replies
View Related
Mar 20, 2009
I've installed fc10 but I got some problem with the audio driver for my Dell Vostro 1700. In particular line input doesn't work correctly neither the built in microphone, neither the line input. Is there a special driver?
View 3 Replies
View Related
Aug 5, 2010
I have recently installed Fedora 13 on my netbook. I wish to use my HP Officejet via the HPLIP utility. The problem with this is that when I have the firewall turned on, the printer is not recognised at all during setup. When the firewall is switched off, the printer is recognised. The printer in question is an HP Officejet 8500a which is connected via Ethernet cable to a wireless router. I would like to know if there are any network ports (that's used by HPLIP) that I could 'turn on' in the firewall that could let my computer recognise the printer.
[Code]....
View 5 Replies
View Related
Nov 4, 2009
I have Ubuntu 9.04, and a HP laserjet 1018 printer.
I install the printer using:
And when it ask me about plugin I give the path to it. (the 3.9.2 version of the plugin, because Ubuntu 9.04 has the 3.9.2 version of hplip)
well I install the printer, everything works perfectly.....but, when I turn off the PC, and turn it on again, the printer does NOT work!, I send work for being printed but mothing happens , Ubuntu tells me that the job was printed but ... no case, my printer does not print it.
I have to install it again since cero. what can I don to stop install it every time I turn off the computer ?
View 1 Replies
View Related
Apr 9, 2011
Installing support for Phototsmart 7150 on Ubuntu 10.10 server (no desktop).Installed 3.10.6 and 3.11.3a.
Installation hangs at the point where the printer is supposed to be detected (after the prompt to restart).At that point I break out with Ctrl-C.I then run hp-setup and select usb. That process complains about missing dbus file but prompts for the printing of a test page. The job begins but only a few lines are printed before the page is ejected, some more lines print, the page is ejected and so on.Have tried to uninstall with make uninstall but since there's no desktop I suppose the hp files are in the home folder?Please inform of proper uninstall for my case.I have also installed hplip via the webmin config. That install proceeds smoothly with no errors but print result is same.
View 4 Replies
View Related
Oct 1, 2015
i installed debian 8.2 with gnome 3 desktop environment when i run this command
Code: Select alldconf write /org/gnome/nautilus/preferences/default-sort-order type i got this error
Code: Select allerror: 0-4:unknown keyword
Usage:
dconf write KEY VALUE
Write a new value to a key
Arguments:
KEY A key path (starting, but not ending with '/')
VALUE The value to write (in GVariant format)
what should i do ?
also when i use gsettings i get
Code: Select all(process:4333): dconf-WARNING **: failed to commit changes to dconf: The connection is closed
View 6 Replies
View Related
Feb 15, 2011
I use Wine on Kubuntu 10.10.
Whenever some-application to open the Internet, wine browser is opened in loop untill I end process tree of wine server.
Also when I use it to execute .exe program I have error
e.g. I tried to run DriverGuide DriverScan:
Quote:
Component 'Codejock.DockingPane.v10.4.0.ocx' or one of its dependencies not correctly registered: a file is missing or invalid
Does anyone know whats missing ?
View 10 Replies
View Related
Feb 6, 2011
I have Ubuntu version 10.10 and I'm trying to install the HP DeskJet 1000 J110a printer. I have HPLIP version 3.11 (the latest version I believe). The printer shows up but when I try to print the error message reads: Printer requires the 'foomatic-rip-hplip' program but is not currently installed.
View 2 Replies
View Related
Sep 1, 2010
Fedora (2.6.34.6-47.fc13.x86_64) I installed that update, during the installation process it said that it had to remove three packages, one of them was kmod nvidia for the old kernel (Fedora (2.6.33.8-149.fc13.x86_64))After the update finished installing the new kernel, I restarted the system and Nvidia did not load. (I assume because Update manager removed the old nvidia? But I also assumed that a new version would be installed automatically?)I received the following Boot messages:
Code:
Entering non-interactive startup
Starting monitoring for VG vg_user1: 3 logical volume(s) in volume group "vg_user1" monitored
[code]....
I'm confused, if Update Manager removed kmod nvidia, then why does yum say it is installed? And why doesn't the new kernel update work with that version? Or should I install a driver version for that particular kernel? I've read while searching that I need to install a kmod-nvidia for that particual kernel version and that I should login to my previous kernel until that happens, is that the problem I'm having?
Why don't rpmfusion and fedoraproject release the kmod-nvidia and kernel updates at the same time to avoid problems such as this? Does anyone know how long does it usually take for rpmfusion to release the new kmod-nvidia driver for the latest kernel?
View 5 Replies
View Related
May 11, 2010
After the upgrade, I've noticed a problem I haven't had before - hibernating worked fine to the last. The problem is, although the system correctly hibernates, it makes no attempt to "wake" from hibernation when I power it up - it boots normally, and with fsck-ing like it was powered off without proper shutdown (understandably). I don't know why it happens, and I've skimmed the logs, but noticed nothing special. What could be the problem? What could I try? Which log should help someone find that out?
View 2 Replies
View Related
Jan 20, 2011
My problem is that I cant "rewrite" older password to new. It looks like I do:
Changing password for user johny.
New UNIX password:
Retype new UNIX password:
passwd: all authentication tokens updated successfully.
all looks OK but after set up new password I can log in using OLD and NEW password. It's very unsecure for me. So in fact I cant change password and it looks like centos create next password to one accout and one account have more then one password... how can I prevent it? pls help me couse its very unsecure in my case.user looks in file shadow /etc/shadow like this:
johny:6JWuwPcQiWCCM:14994:0:99999:7:::
in etc/passwd looks like this:
johny:x:20010:20011::/home/gs-world:/sbin/nologin
how to delete all old passwords?
View 7 Replies
View Related
Oct 23, 2010
No wireless networking. The ethernet works fine, and the wireless interface itself works well in Windows 7 (dual boot). Tried: Ndiswrapper, notoriously quirky, does not seem to work with the XP driver (the oldest driver available for the RTL8191SE). The linux driver offered on the manufacturer's website lacks any installation instructions. I have no clue how to install a linux driver. SUSE seems to have two network managers that are constantly complaining about control: Network Manager and Yast. Neither are great and I am left missing my Ubuntu.
However, my audio only seems to work on SUSE. I have tried almost every distro on this machine. Ubuntu lacked sound and wireless, Fedora played startup sounds, but would not play an mp3 or wav file (fiddling with the mixer did not help). And Fedora also lacked wireless support. PCLinuxOS, my favorite, lacked sound and wireless. Tried some oldies too. ELE, DSL, Puppy, Ubuntu Netbook remix, Vector, Browserpuppy, Crunchbang, Cruncheee (just for experimental sakes) and probably others I am not remembering. So far, installing a free linux distro has cost me 14 dvd-R's and countless hours of installing, reformatting and reinstalling. Part of me really wanted crunchbang to work, as I love the minimalism and blacked-out theme.
I need wireless network access. The wireless light remains red in Linux and pressing the key does nothing to start the device. In Windows 7 it always lights white and works perfectly. Why hasn't SUSE adopted a gui for ndiswrapper? Other distros have it. Why is my brand new laptop, which is by no means abnormal in make or configuration, not 100% supported natively by any Linux distro? I just updated to the new kernel yesterday. So I should be running the most modern operating system available. Yet good-ol Windows 7 is my only fully functional environment.
View 6 Replies
View Related
Aug 27, 2011
which (printer+scanner) is compatible with linux and drivers are in repo's?
HP LaserJet Pro M1132
SAMSUNG SCX-3200
witch of them is better? better performance , ...?
View 1 Replies
View Related
Oct 19, 2010
ok my printer is a "hp deskjet f4240 all in one" my OS is Ubuntu 8.04i have installed many hp drivers that say they work in ubuntu and work for that printer. but they wont work. my printer however is found. this problem only happend after i reinstalled ubuntu.
View 1 Replies
View Related
Feb 10, 2010
Everytime I get HPLip working with my printer, it will only work until I shutdown the computer. On next restart, it no longer works and the only way to get it to work again is to delete the printer configs in hplip and re-create them!
View 2 Replies
View Related
Nov 15, 2010
Trouble with cups - Opensuse 11.3 x86-64
Hplip installed
prrinter = HP photosmart 4280
No way I can set the printer as default printer in cups as in 11.2. Now hp-device-manager. Part of hplip is complaining "set the default printer"
View 2 Replies
View Related
Apr 30, 2011
When I try to change some settings of my printer using HPLIP it tells me to add myself to the lp an sys group. Is that safe ? What are those groups used for ?
View 9 Replies
View Related
Feb 21, 2010
I have tried all the usual stuff like: apt-get cups-pdf and similar things.
Of course I use the proper way (like sudo, etc.) The point is I can't print PDF files. Have a look at the image:
<snip>
I have also modified to the cups-pdf.conf file and have directed it to /home/{USER}/PDF And yes the aforementioned folder (i.e. PDF) exists at its proper place.
So I think the main problem is "P2POutputStream" error which you can see in the image.
View 2 Replies
View Related
Apr 20, 2010
I just built a system and put a fresh install of ubuntu 9.10 on it. I have two other systems with 9.10 as well. On both of them the printer (an HP Officejet Pro 7680 set up directly on the network) is shown as an HPLIP printer with a URI that starts with hp:/net/ . When trying to set up this printer on the new machine the option for HPLIP is not present and the URI starts with dnssd://. I can only set up as and LPD Network Printer or an Appsocket/JetDirect network printer. Yes I have the hplip stuff installed on the new machine. My main concern is actually using the scanner function with Xsane. The other two machines scan just fine, the new one can't find any devices. I think this must be connected with the lack of HPLIP functions. This is with the AMD64 bit version of 9.10
View 1 Replies
View Related
Mar 9, 2011
I plan on changing brands in printer from HP to Brother in the near future. Will I need to completely remove HPLIP before installing Brother printer software pkg on Ubuntu 10.04?
View 6 Replies
View Related
Oct 18, 2009
I just installed HPLIP using Synaptic package manager. One of the configure parameters (shown by 'hp-check -r') is
Code:
Am I correct in assuming that this means that a network printer will not work? Is there a way to override this while still using synaptic package manager? Would I then be able to use a network printer?
I have my eye on the HP photosmart plus B209A - and it looks like HPLIP supports it (there is a ppd file for it).
View 1 Replies
View Related
May 25, 2009
I have an HP printer - C4200 series; Works fine in Slackware.
I am trying to get it to work in mepis-8.
Last thing done: hplip and cups were both un-installed and re-installed with no errors
When I try to install the printer hplip raises the error:
Quote:
printer queue setup failed. Please restart cups and try again.
This was done more that once; the last time after removing and reinstalling both cups and hplip.
I tried to install the printer using cups and get the error:
Quote:
View 5 Replies
View Related
