Fedora :: ATi - Installed Catalyst Driver - Wired Color On The Top Bar
Sep 5, 2011
I've tried ubuntu distribution but I'm not so satisfied of it, a bit because of unity (gnome3 is a way worste of that but is much more smooth and fast) and because on my laptop i always go overheating. with ubuntu coretemp in idle are always on 60?C and go to 75?C watching a video...it was crazy! So I've tried fedora, and I'm so happy with it, also if it is a bit more complex to use! but with some tutorial and easylife i got it working.
I have a dell studio 1537 with intel core 2 duo and ATi Mobility Radeon HD 3450 I've installed catalyst driver and now I have weired color on the top bar...I know is a common prolblem there is a way to solve it? If I have to reinstall Mesa driver how can I remove the Catalyst ones? There is a tweak to have icon on desktop? or at least the trash? Cheese always crash when I use some effect, why? it is a problem of the already installed mesa driver? because I have this problem either with the standard driver installed on the system either with the catalyst and the webcam is laggy like a slow connection...
View 3 Replies
ADVERTISEMENT
Jul 11, 2011
Is it possible for plymouth to work with the ATI Catalyst driver installed in Fedora 15 x86_64?
Is it that plymouth requires KMS and Catalyst doesn't provide it? With the nvidia driver, I could put a vga= line in grub and plymouth would run. Is there something similar for catalyst?
View 3 Replies
View Related
Jun 29, 2010
I'm new to linux. I'm using fedora 13, 64 bit, AMD athlon II processor. I tried to install ATI Catalyst Display Driver for linux but its giving following message
ATI Technologies Linux Driver Installer/Packager
which: no XFree86 in (/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin)
Error: ./default_policy.sh does not support version
default:v286_64:lib::none:2.6.33.5-124.fc13.x86_64:; make sure that the version is being
correctly set by --iscurrentdistro
Removing temporary directory: fglrx-install.tcXvmo
View 3 Replies
View Related
May 26, 2011
Today I spend the day updating to Fedora 15 (from 14). And by spent the day updating to Fedora 15, I mean that like the last 3 updates I've tried with Fedora, they end up getting hosed and I was forced to rebuild using a live disk. That being said I was able to install a fresh instance of Fedora, as well as use leigh123linux's "F15,F14, F13 & F12 Nvidia driver guides" thread to install the necessary drivers on my machine. However after the last reboot, I'm stuck with a funky top screen.
View 7 Replies
View Related
Nov 10, 2010
when RPMfusion will have the ATI catalyst driver for Fdedora 14 in its repo? If it is going to take a log time then I might just install it from ATI's site, but I'd rather not go through all the trouble if I don't have to.
View 2 Replies
View Related
Jun 16, 2011
I just wanted to let everyone know that the latest 11.6 Catalyst driver has been released.I would like everyone to know that I have successfully installed the ATI drivers in gnome, but lost the usability of gnome-shell and automatically dropped back to the basic Gnome desktop. But I still have a usable system.
View 1 Replies
View Related
Aug 21, 2009
UPDATE 8/28/2009: I now recommend that people install the new packages instead of the manual instructions below, see this link:http://forums.fedoraforum.org/showthread.php?t=155503 (Howto for fglrx/catalyst (Ati driver) and Compiz-fusion)NOTE: After installing the packages, I had to do the things at the following link to make the above packages work:http://forums.fedoraforum.org/showpo...postcount=3564If you still want to install the driver manually (you do not need to if you install the packages above), the instructions are below:
Fedora 11 ATI fglrx driver manual install notes
Updated: 10/12/2009
========================================
[code]....
View 14 Replies
View Related
Oct 15, 2010
I am running a fresh installation of Fedora 13 on a 64 bit machine. I have an ATI Radeon HD5750 video card, and I want to install drivers for it. I have tried following Leigh's guide, but I have run into a problem. I cannot install kmod-catalyst because of the following error:
Code:
[root@localhost ~]# yum install kmod-catalyst
Loaded plugins: presto, refresh-packagekit
Setting up Install Process
Resolving Dependencies
--> Running transaction check
[Code]...
View 3 Replies
View Related
Jun 23, 2010
I'd like to know if the latest release of the ATI Catalyst driver is compatible with Fedora 13.
View 14 Replies
View Related
May 17, 2009
I have a laptop with ATI mobility 2400, and ralink wireless, I have not very experience with linux, I have tried many live-cds, ubuntu, opensuse, gentoo, fedora and all crash if I don't boot with the aditional option "clocksource=jiffies", i'm thinking of trying fedora 11 x64 but my main concern is about my ATI mobility VGA, in windows i need to install modded driver as original catalyst are not compatible with my system.
View 3 Replies
View Related
Dec 8, 2010
I had an earlier thread with wrong title and wasn't sure of the problem at the time. Now I have some details after checking all the threads about catalyst so posting a new thread. The problem: In korganizer (or To-Do list in kontact), whenever double-clicking or right-click->Edit.. a To-Do item in the summary list window, it crashes Xorg.
[Code]...
Fatal server error: Caught signal 11 (Segmentation fault). Server aborting I think it has something to do with the amd/ati catalyst driver and korganizer. My video card is XFX Radeon HD5670. I have Fedora 14 x86_64 latest update with xorg 1.9.1-3. I tried catalyst 10.9, 10.10, 10.11, and kernel 2.6.35.6-45.fc14.x86_64, 2.6.35.6-48.fc14.x86_64, 2.6.35.9-64.fc14.x86_64. Same problem.
If I use vesa driver, or from another PC with proprietary nvidia driver, no problem. Open source radeon driver works ok but sometimes the display turns off and I can't get back the display. And I need 3D. I scoured through the forum and followed the instructions exactly:
[code]...
View 1 Replies
View Related
Apr 8, 2010
I've been searching for an hour or so and can't seem to find a concrete answer. My endgame is having Ubuntu successfully installed (either 9.10 or 10.04) with a fully working Ati 4870x2. I desperately need some help on finding the proper configuration of OS version and driver version. I installed 10.04 with the 10.3 driver package from ATI's site and it was a no go - I had nothing but problems.
I would like to have full 3d acceleration so I can play some games through Wine. This is a powerful card - I know ATI doesn't have a great reputation in the Linux world but I really hope there is a driver version I can install to get some good results.The rest of my specs are in my signature I need to install 64 bit Ubuntu to make use all of the system and video ram.
View 2 Replies
View Related
Nov 5, 2010
I have already downloaded and installed ati's catalyst for my ati mobility radeon 4570 (at least i think so, since there is the ATI catalyst control center in the system-> preferences menu). The problem is that i want to upgrade its version from 10.9 to 10.10. and since i want to firstly uninstall the previous version,I get this:
Code:
alexandros@alexandros-laptop:/usr/share/ati$ sh ./fglrx-uninstall.sh
sh: Can't open ./fglrx-uninstall.sh
The uninstall.sh doesn't exist.
View 6 Replies
View Related
Feb 25, 2011
I run Ubuntu 10.10 on a dual monitor set up with one direct to my monitor and one to my TV through HDMI. I run the screens in clone mode with the TV showing exactly what is on my monitor(same resolutions/refresh rates). My problem is that I have problems with software that involves any sort of 3d rendering/openGL. I have ATI drivers installed and catalyst control center. I first noticed the problem just after install where I am unable to see any of the screensavers that have GL in the title. My screen just goes black even in preview mode.
I started downloading a few games. All my 2d games work, but when I installed Oolite all I got was a black screen. So I uninstalled all my ATi software and Oolite worked just fine without the ATI drivers. The screen savers still refuse to work and I am not sure where to begin to diagnose the problem. I also notice alot of tearing when watching any sort of videos on my TV screen. I haven't found any way of creating a "theater mode" where by I get fullscreen video with full V synch on one monitor whilst windowed on the other monitor.
Below are a few of my system specs:
CPU Type AMD Athlon 64, 2200 MHz (11 x 200) 3200+
Motherboard Name Unknown
Motherboard Chipset SiS 761, AMD Hammer
System Memory 1024 MB (PC3200 DDR SDRAM)
BIOS Type AMI (11/09/07)
Display
Video Adapter ATI Radeon HD 4300/4500 Series (512 MB)
Multimedia
Audio Adapter Analog Devices AD1888 @ SiS 7012 Audio Device
View 1 Replies
View Related
Jan 12, 2010
I have Slackware 13.0 installed with the newest stable kernel (2.6.32.3) on an hp notebook with ati hd3200 igp. What happens is that when I try to buildpkg the catalyst drivers, it fails on the new kernel but not on the original one. I've been searching for a solution for a few days now. found a few that involved patching some files, but none seem to work or I can't make them work. I could probably use the binary installer but I would prefer not to.
Here's the output:
Code:
sh ./ati-driver-installer-9-11-x86.x86_64.run --buildpkg Slackware/Only_Module
Created directory fglrx-install.hokais
Verifying archive integrity... All good.
Uncompressing ATI Proprietary Linux Driver-8.672......
ATI Technologies Linux Driver Installer/Packager
Generating package: Slackware/Only_Module .....
View 3 Replies
View Related
Sep 17, 2010
I tried to install the ATI proprietary driver for an HD 5800 (Catalyst for Linux 64 bit, v. 10.8). The two main instruction sites are:
SDB:Configuring graphics cards - openSUSE
SDB:ATI drivers - openSUSE
I chose the hard way method. I downloaded the driver. Restarted SuSE 11.3 in mode 3. And as SU followed the method above, including adding the zypper programmes (which found some already installed and which installed a whole lot more). When I then attempted to run the install (sh ./atidriver-install-10.8-x86.x86_64.run) and selected automatic mode. It completed 82% and stalled attempting to install "Postprocessing Kernel Module".
I pressed control c to kill the process and attempted to re-install using the manual mode and then using the build mode. In both instances, same outcome. When I rebooted, and entered my password, the desktop did not load but sent me back to the username/password page. I can't get back in. Does not matter as I have backed up my docs.
I decided to install the proprietary driver because the colours on the desktop corrupt after the 2nd boot following a clean install. i.e. on the initial boot the colours are fine. Second, this is the 3rd effort I have made to install the driver after a clean install of SuSE 11.3 and there is no change in outcome. So, my question: anyone any suggestion what is going on and how I can install the driver successfully? Or, do I not understand the new regime in SuSE 11.3 and should I not attempt to install a new driver.
View 9 Replies
View Related
May 2, 2011
I realize that Canonical is not responsible for the Catalyst driver, but I can't seem to operate outside of the Ubuntu Classic (no effects) mode for 64 bit Natty, and I was curius if anyone else had encountered or resolved this.
When I upgraded from 10.10 (I was using the fglrx package), xorg would immediately crash. I was able to reach the gdm screen only using recovery mode. I uninstalled the fglrx package, and now I can boot into Ubuntu Classic (no effects) mode only (no other desktop will work) using the open-source driver at no greater than 1280x1024.
When I try to re-install the catalyst driver using aptitude or Administration->Additional Drivers, the installation fails:
(jockey.log: WARNING: modinfo for module fglrx failed: ERROR: modinfo: could not find module fglrx)
Similarly, package generation from the AMD page fails:
Installation complete.
*** glibc detected *** ./setup.data/bin/x86_64/setup: double free or corruption (fasttop): 0x000000000259f630 ***
======= Backtrace: =========
[Code].....
View 5 Replies
View Related
Apr 3, 2011
I have installed Debian and the vi have no color.
View 5 Replies
View Related
Apr 11, 2010
how do I tell if F12 has installed the correct driver for my Dell GX260?
View 10 Replies
View Related
May 25, 2010
A driver was installed however it is the wrong one. How do i uninstall it?
View 3 Replies
View Related
Feb 23, 2011
I mucked my system up while trying to install proprietary nvidia drivers -- I was careless and installed the wrong ones (should have used legacy drivers). Now my system hangs on "starting udev" during boot.I have tried many combinations of boot options in an effort to blacklist the problematic driver. Attached is a picture of my boot screen after specifying the options "single init 3 modprobedebug", and removing the options "rgbh quiet". For some reason I am having a lot of trouble blacklisting the correct module, or maybe I caused a kernel problem, which in that case is beyond me.Also, boot option syntax question: can I specify something like "rdblacklist=*nvidia*" using wildcards?
View 5 Replies
View Related
Aug 2, 2010
I would use the nouveau driver but the color hue seems to be slightly off. Is there any way to adjust the hue for the driver in real time(I don't want to have to change values in Xorg.conf the stop x, restart x and see if it worked). For example the proprietary nvidia drivers have the color settings in nvidia-settings.
View 2 Replies
View Related
Nov 9, 2010
I'm using openSUSE 11.3. In the Yast2's module: Software Management, in the search tab, there is a column called: "Installed (Available)", It usually shows the current installed version of the package, but sometimes its blue, red or most of the times black. What does the color mean?
View 1 Replies
View Related
Dec 1, 2009
explain the way to check whethere a linux driver is installed or not in Fedora 9. i would like to see if "plpevtch" driver is loaded or not?
View 7 Replies
View Related
Jul 27, 2010
I tried to install the new Vbox 3.2.6 through rpm as a guide told me but I first had errors with the older vbox dependencies, so I uninstalled vbox 3.1.8.2 and now I am with a vbox period. Is there something I can do to fix this I tried this tutorial didn't work for me [URL] and another on the fedora forum (lost the history). error I get is Recompiling VirtualBox kernel module [FAILED] and Kernel driver not installed (rc=-1908) The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. Please reinstall the kernel module by executing.
View 5 Replies
View Related
Nov 20, 2010
i just installed fedora 14 x86_64 on an external driver now everything works fine except that i don't have any sound comming out of my speakers so i think that my sound cart is not detected or the driver isn't installled (can't find a driver for linux to so i can't confirm)
View 6 Replies
View Related
May 10, 2010
I just installed Ubuntu amd64 10.04 on my Gateway LT3114u Netbook. The video card on this device is ATI Radeon� X1270. For some reason the automatic driver installed by Ubuntu is not working perfectly, I noticed that because: When the "Appearance Preferences" - "Visual Effects" are set to "Normal" or "Extra", some very weird lines and images apear, and I can�t read any word as the characters are messy. But if this setting is "None", the system works just fine!
Also, I tried to install the ATI driver and the "ATI Catalyst Control Center" and when I try to run it, it says the ATI driver is not working ok. Any tips on how to solve it? Please consider Im a begginer for Ubuntu.
View 4 Replies
View Related
Feb 7, 2011
I installed Debian 6.0 on my hp dv400 laptop, Ive been using linux ubuntu for a while now and my wireless card has always been picked up but after isntalling Debian its not working. This is what I have. Also I cant seem to install awn for some reason.
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 04)
00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04)
00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4)
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 04)
00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 04)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04)
06:05.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)
06:06.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
06:06.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
06:06.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
06:06.4 SD Host controller: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller
06:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
View 3 Replies
View Related
Jul 25, 2010
I installed xubunto 10.4 on my pc the other day and every thing was working fine and then the next day my wired network card went down. So I restarted it and it say Wired Network Disconnected. I tried doing sudo ifconfig eht0 up to try and bring the card back online but nothing happens. I also tried reinstalling xubuntu on my computer. Again my internet works then starts freezing up so I restart it and my ethernet card goes down again. I have tried also plugging it into the second ether net port on my computer but that does not seem to work. Also I went into my dhclient-script and went to the bottom to look at my network card stuff.
It reads
#Changed from 'ifconfig $interface inet 0 down' - see Debian bug #144666 ifconfig $interface inet 0
exit_with_hooks 2 "$@"
fi
View 2 Replies
View Related
Jul 23, 2011
I have an ibm think pad and for some reason the internet(firefox) stop working and i don't know why , the netwprl settings have disappeared or anything on fixing it , yes i have tried restarting the modem but that hasn't work ethier Also i don't really know where the re-start disk so is there anyway i can fix it with out the disk?
View 4 Replies
View Related
