I just wanted to let everyone know that the latest 11.6 Catalyst driver has been released.I would like everyone to know that I have successfully installed the ATI drivers in gnome, but lost the usability of gnome-shell and automatically dropped back to the basic Gnome desktop. But I still have a usable system.
View 1 RepliesI'm new to linux. I'm using fedora 13, 64 bit, AMD athlon II processor. I tried to install ATI Catalyst Display Driver for linux but its giving following message
ATI Technologies Linux Driver Installer/Packager
which: no XFree86 in (/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin)
Error: ./default_policy.sh does not support version
default:v286_64:lib::none:2.6.33.5-124.fc13.x86_64:; make sure that the version is being
correctly set by --iscurrentdistro
Removing temporary directory: fglrx-install.tcXvmo
when RPMfusion will have the ATI catalyst driver for Fdedora 14 in its repo? If it is going to take a log time then I might just install it from ATI's site, but I'd rather not go through all the trouble if I don't have to.
View 2 Replies View RelatedUPDATE 8/28/2009: I now recommend that people install the new packages instead of the manual instructions below, see this link:http://forums.fedoraforum.org/showthread.php?t=155503 (Howto for fglrx/catalyst (Ati driver) and Compiz-fusion)NOTE: After installing the packages, I had to do the things at the following link to make the above packages work:http://forums.fedoraforum.org/showpo...postcount=3564If you still want to install the driver manually (you do not need to if you install the packages above), the instructions are below:
Fedora 11 ATI fglrx driver manual install notes
Updated: 10/12/2009
========================================
[code]....
I am running a fresh installation of Fedora 13 on a 64 bit machine. I have an ATI Radeon HD5750 video card, and I want to install drivers for it. I have tried following Leigh's guide, but I have run into a problem. I cannot install kmod-catalyst because of the following error:
Code:
[root@localhost ~]# yum install kmod-catalyst
Loaded plugins: presto, refresh-packagekit
Setting up Install Process
Resolving Dependencies
--> Running transaction check
[Code]...
I've tried ubuntu distribution but I'm not so satisfied of it, a bit because of unity (gnome3 is a way worste of that but is much more smooth and fast) and because on my laptop i always go overheating. with ubuntu coretemp in idle are always on 60?C and go to 75?C watching a video...it was crazy! So I've tried fedora, and I'm so happy with it, also if it is a bit more complex to use! but with some tutorial and easylife i got it working.
I have a dell studio 1537 with intel core 2 duo and ATi Mobility Radeon HD 3450 I've installed catalyst driver and now I have weired color on the top bar...I know is a common prolblem there is a way to solve it? If I have to reinstall Mesa driver how can I remove the Catalyst ones? There is a tweak to have icon on desktop? or at least the trash? Cheese always crash when I use some effect, why? it is a problem of the already installed mesa driver? because I have this problem either with the standard driver installed on the system either with the catalyst and the webcam is laggy like a slow connection...
I'd like to know if the latest release of the ATI Catalyst driver is compatible with Fedora 13.
View 14 Replies View RelatedIs it possible for plymouth to work with the ATI Catalyst driver installed in Fedora 15 x86_64?
Is it that plymouth requires KMS and Catalyst doesn't provide it? With the nvidia driver, I could put a vga= line in grub and plymouth would run. Is there something similar for catalyst?
You can get the 64 bit version 270.41.19 of the nVIDIA proprietary Video Driver from this link:[URL]..
And the new video driver from nVIDIA no longer is outputting any error message when it is installed as was the case with 270.41.6. So, it is worth a try I do believe to go with the new version. I have a bash script that can be helpful in installing this driver if you would like to use it. Read about lnvhw from here: LNVHW - Load NVIDIA (driver the) Hard Way from runlevel 3
I have a laptop with ATI mobility 2400, and ralink wireless, I have not very experience with linux, I have tried many live-cds, ubuntu, opensuse, gentoo, fedora and all crash if I don't boot with the aditional option "clocksource=jiffies", i'm thinking of trying fedora 11 x64 but my main concern is about my ATI mobility VGA, in windows i need to install modded driver as original catalyst are not compatible with my system.
View 3 Replies View RelatedI had an earlier thread with wrong title and wasn't sure of the problem at the time. Now I have some details after checking all the threads about catalyst so posting a new thread. The problem: In korganizer (or To-Do list in kontact), whenever double-clicking or right-click->Edit.. a To-Do item in the summary list window, it crashes Xorg.
[Code]...
Fatal server error: Caught signal 11 (Segmentation fault). Server aborting I think it has something to do with the amd/ati catalyst driver and korganizer. My video card is XFX Radeon HD5670. I have Fedora 14 x86_64 latest update with xorg 1.9.1-3. I tried catalyst 10.9, 10.10, 10.11, and kernel 2.6.35.6-45.fc14.x86_64, 2.6.35.6-48.fc14.x86_64, 2.6.35.9-64.fc14.x86_64. Same problem.
If I use vesa driver, or from another PC with proprietary nvidia driver, no problem. Open source radeon driver works ok but sometimes the display turns off and I can't get back the display. And I need 3D. I scoured through the forum and followed the instructions exactly:
[code]...
I want to write a driver in c so that when i released the key some message will printed in output screen. The driver should be for arm.I have a driver which read the key when it is pressed.But i want the both (means key press and release).
View 3 Replies View RelatedI've been searching for an hour or so and can't seem to find a concrete answer. My endgame is having Ubuntu successfully installed (either 9.10 or 10.04) with a fully working Ati 4870x2. I desperately need some help on finding the proper configuration of OS version and driver version. I installed 10.04 with the 10.3 driver package from ATI's site and it was a no go - I had nothing but problems.
I would like to have full 3d acceleration so I can play some games through Wine. This is a powerful card - I know ATI doesn't have a great reputation in the Linux world but I really hope there is a driver version I can install to get some good results.The rest of my specs are in my signature I need to install 64 bit Ubuntu to make use all of the system and video ram.
I have already downloaded and installed ati's catalyst for my ati mobility radeon 4570 (at least i think so, since there is the ATI catalyst control center in the system-> preferences menu). The problem is that i want to upgrade its version from 10.9 to 10.10. and since i want to firstly uninstall the previous version,I get this:
Code:
alexandros@alexandros-laptop:/usr/share/ati$ sh ./fglrx-uninstall.sh
sh: Can't open ./fglrx-uninstall.sh
The uninstall.sh doesn't exist.
I have Slackware 13.0 installed with the newest stable kernel (2.6.32.3) on an hp notebook with ati hd3200 igp. What happens is that when I try to buildpkg the catalyst drivers, it fails on the new kernel but not on the original one. I've been searching for a solution for a few days now. found a few that involved patching some files, but none seem to work or I can't make them work. I could probably use the binary installer but I would prefer not to.
Here's the output:
Code:
sh ./ati-driver-installer-9-11-x86.x86_64.run --buildpkg Slackware/Only_Module
Created directory fglrx-install.hokais
Verifying archive integrity... All good.
Uncompressing ATI Proprietary Linux Driver-8.672......
ATI Technologies Linux Driver Installer/Packager
Generating package: Slackware/Only_Module .....
I tried to install the ATI proprietary driver for an HD 5800 (Catalyst for Linux 64 bit, v. 10.8). The two main instruction sites are:
SDB:Configuring graphics cards - openSUSE
SDB:ATI drivers - openSUSE
I chose the hard way method. I downloaded the driver. Restarted SuSE 11.3 in mode 3. And as SU followed the method above, including adding the zypper programmes (which found some already installed and which installed a whole lot more). When I then attempted to run the install (sh ./atidriver-install-10.8-x86.x86_64.run) and selected automatic mode. It completed 82% and stalled attempting to install "Postprocessing Kernel Module".
I pressed control c to kill the process and attempted to re-install using the manual mode and then using the build mode. In both instances, same outcome. When I rebooted, and entered my password, the desktop did not load but sent me back to the username/password page. I can't get back in. Does not matter as I have backed up my docs.
I decided to install the proprietary driver because the colours on the desktop corrupt after the 2nd boot following a clean install. i.e. on the initial boot the colours are fine. Second, this is the 3rd effort I have made to install the driver after a clean install of SuSE 11.3 and there is no change in outcome. So, my question: anyone any suggestion what is going on and how I can install the driver successfully? Or, do I not understand the new regime in SuSE 11.3 and should I not attempt to install a new driver.
I realize that Canonical is not responsible for the Catalyst driver, but I can't seem to operate outside of the Ubuntu Classic (no effects) mode for 64 bit Natty, and I was curius if anyone else had encountered or resolved this.
When I upgraded from 10.10 (I was using the fglrx package), xorg would immediately crash. I was able to reach the gdm screen only using recovery mode. I uninstalled the fglrx package, and now I can boot into Ubuntu Classic (no effects) mode only (no other desktop will work) using the open-source driver at no greater than 1280x1024.
When I try to re-install the catalyst driver using aptitude or Administration->Additional Drivers, the installation fails:
(jockey.log: WARNING: modinfo for module fglrx failed: ERROR: modinfo: could not find module fglrx)
Similarly, package generation from the AMD page fails:
Installation complete.
*** glibc detected *** ./setup.data/bin/x86_64/setup: double free or corruption (fasttop): 0x000000000259f630 ***
======= Backtrace: =========
[Code].....
I just installed Ubuntu amd64 10.04 on my Gateway LT3114u Netbook. The video card on this device is ATI Radeon� X1270. For some reason the automatic driver installed by Ubuntu is not working perfectly, I noticed that because: When the "Appearance Preferences" - "Visual Effects" are set to "Normal" or "Extra", some very weird lines and images apear, and I can�t read any word as the characters are messy. But if this setting is "None", the system works just fine!
Also, I tried to install the ATI driver and the "ATI Catalyst Control Center" and when I try to run it, it says the ATI driver is not working ok. Any tips on how to solve it? Please consider Im a begginer for Ubuntu.
Step 1: Open TerminalStep 2: Run as root in Terminal
Code:
su -
And enter the root's password.
[code]....
I've recently installed a Radeon HD 5770 graphics card, but it currently doesn't have support from any open source drivers (including MESA's experimental DRI drivers). The only other option would be ATI's Catalyst drivers, but 9.12 doesn't support Xorg 7.5 at the moment (the drivers disable Xorg; leaving a terminal only setup).
The question I've got is that is it possible to downgrade Xorg to 7.4 as a temp workaround and if so, how easy would it be to revert back to 7.5 afterwards.
Well I downloaded Catalyst 10.12 for linux. Was trying to build packages for Fedora 14. But was unable to find Fedora entry in it. Wonder why it is not there?Here is my X
[Code]...
How am I suppose to install catalyst if they don't have the packages ready yet ? I am not so installing RHEL6 packages in Laughlin cause of kernel conflict. Or is it that Catalyst still not compatible with Kernel 2.6.35.x ?
AFAICT, F14 does not have any formal support right now (no rpms, etc), and there are some pitfalls to using the ATI installer which I am sure have resulted in system re-installs, unhappy faces, and people stuck without a proper driver. This is because while the installer seems easy to use, it's unfriendly in so far as it does not check for pre-requisite software first, and when it craps outs, it doesn't tell you anything is wrong, but it will leave your system without a functioning X server. The first time I ran it, the GUI installer told me everything was complete and that all I needed to do was reboot! When I did, X would not work, and reinstalling the original xorg-ati driver, etc, did not fix it.....
View 3 Replies View RelatedHave a fresh install of FC14, 2.6.35.11-83.fc14.i686.PAE. After trying the Catalyst install instruction the response is this - Requires: kernel-uname-r = 2.6.35.12-88.fc14.i686.PAEInstalled: kernel-PAE-2.6.35.11-83.fc14.i686 (@updates)I do 'yum update kernel' and I appear to have the latest release.
-------------------
[root@localhost ~]# yum update kernel
Loaded plugins: langpacks, presto, refresh-packagekit
[code]....
I installed the ATI Catalyst drivers for my laptop and I guess they are working since World of Warcraft and other graphic dependent programs are working, but the problem is my boot up screen is really ugly now. Instead of the Fedora drop filling up I get a bar at the bottom of the screen that fills up. This happens only after installing the Catalyst drivers how do I change it back to the drop? This is the only issue I'm having.
Fedora 15 x64 is my operating system.
I recently downloaded and installed the ATI Catalyst drivers for my ATI Radeon HD 4800... now it doesn't work at all. I Load Fedora and after the initial loading screen both of my monitors go blank. Does anyone have any suggestions on how I could get into the command prompt and install the fglrx driver, or whatever that proprietary one is called
View 2 Replies View RelatedToday I spend the day updating to Fedora 15 (from 14). And by spent the day updating to Fedora 15, I mean that like the last 3 updates I've tried with Fedora, they end up getting hosed and I was forced to rebuild using a live disk. That being said I was able to install a fresh instance of Fedora, as well as use leigh123linux's "F15,F14, F13 & F12 Nvidia driver guides" thread to install the necessary drivers on my machine. However after the last reboot, I'm stuck with a funky top screen.
View 7 Replies View RelatedI have an ATI Radeon 6450 (*cough*shitty*cough*). Everything runs fine, but the graphics freeze up occasionally. I haven't installed anything/changed any files.
View 2 Replies View RelatedAs you can see here Linux Dc++ 1.1.0 have just been uploaded: [url] for some reason i still have 1.0.3 but i use Maverick and there are no debs for Maverick as of now so i'll just wait for there release.
View 1 Replies View RelatedI finally upgraded from my old Passive Nvidia 6600GT video card to a passive ATI 5750. Using Fedora Core 12, 2.6.32.16-141.fc12.i686, On boot the native driver worked but the card got hot as it was not de-clocking into idle mode like it does under windows 7.
So I reluctantly installed the closed source ATI driver from RPM Fusion
I also added nomodeset to the kernel start-up
Previously I was using the native standard built in Nvidia driver.
The new ATI driver seems to be running with correct entry in Xorg.conf and now it runs very cool at idle just like under windows :-
However the control center will not start...There was a problem initializing Catalyst Control Center Linux edition.
Also some commands using aticonfig return this error...
These libs are on the system in /usr/lib/catalyst
I am also getting video tearing in movies with mplayer and VLC. I have tried the options...
Which added a vsync entry in xorg.conf, but No luck...I think I need to get catalyst control center (amdcccle) running which I has a sync on refresh option radio box that may solve my video issue.
I can live with these errors but the video / movie tearing is a show stopper.
I am getting headache over this trying to find a solution to these issues. ATI and Linux still do not mix well
-> Announced in the Changelog.
View 14 Replies View Related