Red Hat / Fedora :: Dual Monitor Setup In Fedora 12
Mar 23, 2011
I need some help getting my dual monitors working in Fedora 12. I've tried some things from other posts and a few things from various websites and wikis (Gentoo), but nothing I've done has worked. To be honest, I can barely remember what I've tried and what I haven't anymore, because I feel like I've gone in circles.The card has one DVI out and I'm using a DVI-splitter to connect the two monitors. This configuration works on my Windows 7 boot. Also, the second monitor is detected, but shows no display.
View 1 Replies
ADVERTISEMENT
Dec 27, 2010
I am running Fedora 13 on a PC I built myself - MSI motherboard 785-E53. It has onboard DVI which my primary monitor is hooked to. I added an older 17" CRT to the onboard analog output and the main desktop with my icons and panels immediately switched to the CRT. Kernel is 2.6.34.7-66.fc13.i686, lspci -v says VGA compatible controller ATI Technologies Inc RS880 (Radeon HD 4200). How can I get flatscreen on the DVI output to be the primary?
View 10 Replies
View Related
Jan 27, 2011
I just upgrade to F14 from F10 on a dual montor setup. Firefox behaives differently on F14 than on F10.
On F10 it followed the mouse pointer's location and show up on the correct monitor
When maximized at close, it is always displayed on the left monitor. When not maximized at close it will open on the monitor where the mouse pointer is located.
About minimize/maximize Firefoxe before closing and it seems to work in some case, but not for me.
View 5 Replies
View Related
Dec 12, 2009
I recently upgraded to fedora 12. Before the upgrade I had a desktop background which filled the entire 2 screens. After the upgrade i noticed that the background is displayed on each monitor twice so when displaying the desktop I see the background twice.I tried to change the settings for it like 'center' and 'fill screen' but to no avail. The rest of the dual monitor setup works fine.
View 1 Replies
View Related
Apr 23, 2011
I am attempting to use dual monitors in Fedora 14 using an AMD ATI Radeon HD 5700 Series graphics card (not that I think that has anything to do with anything, but who knows), and want it to where my second monitor is its own virtual workspace so that I can switch between my other workspaces on my original monitor without switching the workspace on the second monitor. This way, I can watch movies or what-not on my TV (2nd monitor) while working on my original monitor.The only thing I found that was even close was setting the 2nd monitor up on it's on x server, which I don't want to do. Also, as it is now, I have my panel on my original monitor, but the windows do not see it when I have it aligned on the right (the windows don't adjust their size to account for the fact that it is there). I know a way I can do a work-around for this, but I would like to know if there is a "correct" way to do this. I know I can tell the movie player to show on all workspaces and have it on the 2nd monitor.
View 1 Replies
View Related
Jun 15, 2011
I created a dual monitor setup in Slack 13.37 using the KDE systemsettings -> Monitor Setup function. (Sadly I had to rebuild ~/.kde in the process, but that's a different story.)
I verify that ~/.kde/share/config/krandrrc contains the new monitor setup (both screens active). I have saved a startup session with krandrtray running. However, when I logon, the system always starts with both screens in clone mode. I always have to go into systemsettings or krandrtay and redo the dual monitor configuration.
Is there a better way? Do I have to create a suitable xorg.conf (which I will try when I get home) or is there another way to boot into the dual config automatically?
View 4 Replies
View Related
Jun 19, 2010
I loaded Lucid on my system, dual booting w/ win7. I have two monitors, and i need it to have extended desktop view. How do i enable this?
Here is my LSPCI
Right now my monitor dislay is not want i wanted.
View 1 Replies
View Related
Jun 29, 2011
I'm using the proprietery nvidia drivers on 11.04. I have a dual monitor setup with xinerama. The login screen appears to work fine, I can move my mouse between screens, and only one screen (right) has the login prompt. When I login, both screens show the same thing. While I can move my mouse across, I can only interact when it's on the left side.
I found this: [url], but I cannot start the display settings in the XFCE control center due to "missing randr extentions". Yesterday, I was using Kubuntu 11.04 on this same machine, and the dual monitor setup worked fine.
View 8 Replies
View Related
Nov 19, 2009
Long time reader, first time poster to the forums. I have installed Fedora 12 onto a desktop here. Fresh install and fully updated as of today. In this system there is a radeon 7000 graphics card that Fedora set up dual display for me. This is working fine but unfortunately im seeing a problem with the top and bottom of one of the displays.
Please see the problem here: [URL]... The mouse will go underneath or above the areas i have pointed to. Any ideas what is wrong? In fedora 9, 10, 11 this was all working fine but i did have to use xrandr manually to get dual display working. Edit: Update:
I dd not mention that i kept my home directory. On futher inspection it seems that the issue is because of a .folder in my home directory that was backed up and restored on the fresh install. To check this i added a new user to the system and logged in with a fresh home directory. Does anyone know which folder or file this setting this is stored? I tried logging out, moving .gconf .gconfd .gnome2 .gnome2_private and the .gtk folders to another location then logged in to no avail.
View 1 Replies
View Related
Mar 22, 2016
I am wondering if it is possible to have programs remember which monitor they were last placed on when re-opening them?
View 1 Replies
View Related
Sep 2, 2015
Just installed Debian 8, coming from Ubuntu12, it seems I cannot get my dual monitors to work as it should.
I want two monitors side by side, currently I have two identical outputs. I looked around a bit and register two possible problems.
root@bigcem101-debian:/home/bigcem101# xrandr
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 640 x 400, current 1024 x 768, maximum 1024 x 768
default connected primary 1024x768+0+0 0mm x 0mm
1024x768 0.00*
800x600 0.00
640x480 0.00
720x400 0.00
Hence, problem 1: it is as if there is only one monitor detected. Then I tried to look for Xorg.conf ..... and: problem 2 xorg.conf is not there. This seems to be normal but when I installed my Ubuntu years ago it was still there and one could manually set things. There must be something new I am missing.
Card:
VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV670 [Radeon HD 3690/3850]
It seems I have both ati and radeon installed.
root@bigcem101-debian:/home/bigcem101# X -configure
(EE)
Fatal server error:
(EE) Server is already active for display 0
I am clueless.
View 0 Replies
View Related
May 20, 2011
I'm trying to get an external monitor hooked up to my laptop with the intention to use both simultaneously using TwinView. Actually, I'm not "trying to make it work": everything works fine, using NVIDIA X Server Settings. However, when I reboot these settings are lost and I have to manually expand my desktop again.
I've found that running NVIDIA X Server Settings as root should allow one to "Save to X Configuration File", in order to let it automatically load the right settings. When I click this option, however, I'm asked to manually provide a file name with my home folder as the default location. I'm confused how to proceed - where should I save this configuration? Or should I be taking a completely different approach in the first place? (note: KDE 'Display and Monitor' doesn't work. Only when I use the NVIDIA-thingy KDE will recognize that my desktop is expanded to a 3600x1080 resolution)
View 9 Replies
View Related
Mar 10, 2010
I just installed Ubuntu 9.10 this evening. I have a Nvidia Geforce 8500GT video card with two monitors hooked up (one to the cards VGA, the other to the DVI). I installed Nvidia drivers and Ubuntu is working with both monitors fine.
The problem I am having is it chose the monitor plugged into VGA as the primary (uses that monitor for the toolbars) when I really want them to go on the monitor that is plugged into DVI. Is there anyway for me to switch which monitor Ubuntu treats as the primary?
View 2 Replies
View Related
Jul 22, 2010
I recently got a signal conversion box so I could route my netbooks monitor-out port to my TV. The idea being that I could effectively set the TV up as a separate monitor for watching movies on whilst I worked using the netbooks own monitor. It seemed to work initially, the Monitors dialog box could easily detect and setup the TV as if it were just an external monitor however I can't seem to play any kind of video on either screen when this is set up. All I get in Totem, Mplayer, VLC and skype is just a black area within the applications window. The sound works fine so this is clearly just a video problem.
It only seems to occur when I configure the system to use the TV as a separate monitor. If I tell it to display the same thing on both monitors all video output works fine.
View 5 Replies
View Related
Mar 11, 2011
I am trying to setup a dual monitor on my system. I have gone through many posts and did the following.Downloaded EnvyNG to download relevant ATI drivers and eventually I got to a point where I can see that ATI is listed under Hardware drivers. But, from here, how do I actually set dual monitors?. I am looking for some interface like Catalyst, but couldn't find one after the drivers got installed. What am I missing here?I went back and forth, but after restarting the PC, the resolution goes to 800X640 and I have no option of setting dual monitors. I reset the options in /etc/X11/xorg.conf to let Ubuntu use the default drivers.
View 2 Replies
View Related
Sep 1, 2011
When ever I install the (recommended) drivers through the "Additional Drivers" interface to run Unity my dual monitor setup does not work. The monitors won't even detect correctly what so ever. Then, when ever I install (more basic?) nVidia drivers through the packet manager, my dual monitors work as planned, but now Unity won't work. What's the deal? Are there any work arounds for this?
View 4 Replies
View Related
May 6, 2011
I did set up dual monitors few times on few of my boxes, with 3 video cards :
Radeon 9250 AGP (have 2 of them) - with open source ATI driver
Geforce 6200 PCIE - with nouveau driver
In all cases I connect 2 LCDs. one 1440x900 or 1680x1050 to DVI and one 1280x1024 to VGA (all the cards have DVI and VGA out). The LCDs are the same ones tested with all cards :
1440x900 : Benq FP-92W
1680x1050 : Teac T2005L15 (identified as KTC2002 in xorg)
1280x1024 : Proview PQ-721KP
Tried on different boxes runnning Arch linux, different kernel / x / drivers / kde versions
Problem is - in all those setups, one monitor allways randomly blanks for a split second and comes back (incl. switching of the backlight, and displaying the "Source : VGA" or "Source : DVI" title as if it was switched off and on)
This happens randomly, but (more pronounced with the ATI cards) related to me clicking on stuff or the display changing (even if the changes are on the second screen)
With the Radeons only the monitor connected to DVI blanks. And the 2 radeons do it in different frequency, one is more often and one less
With the Geforce only the monitor connected to VGA blanks
When I test with 1 monitor (other one disabled in xorg) : Radeons sometimes still do that to DVI monitor but rare (much less than with VGA connected) (VGA monitor never blanks). Geforce does not do it at all and has problem only when 2 monitors are connected
I first thought its a hardware issue (the cards are from junk), but it happens the same with totally different hardware (exceps using same monitors) so i no longer think it is
There is nothing interesting in Xorg.0.log
View 2 Replies
View Related
Jun 5, 2011
I have asked about this issue before to no avail but since then I have been able to narrow down the main cause of the crashes. My setup:
HD5770 - Running 2 19" LCD's
HD3300 onboard Running 1 47" lcd
Whenever I am in firefox and have pictures open in the browser and move the mouse to the other 19" monitor it crashes, not everytime but often enough to be annoying. Sometimes when it crashes the screen goes blank and I wind up at the login screen, other times it just goes blank and stays blank.
View 14 Replies
View Related
Jun 28, 2010
I know there are a lot of dual monitor threads.I've read them, and I even checked at the nvidia forum.I don't see something similar enough to my problem so I'm thinking maybe it's not a driver issue.I'm running F12, both monitors were working and I configured them properly and they were fine.Yesterday I installed the nvidia drivers as per Leigh's tutorial.Once I got that sorted out and rebooted, my secondary monitor was no longer registering.I checked in display settings and it does not recognize the second monitor.I tried going to system->administration->display but after I authenticate nothing happens.
View 3 Replies
View Related
Jul 4, 2011
I am using lenovo laptop and I have docking system, to extend another monitor on my desk for display.
Laptop 15.6 inch: 1600-900(16:9)
Acer 21 inch : 1920x1080 (16:9)
How to setup in fedora, so I can have both monitor display same screen, with respect of their resolution? When I click "MIrror displays" the resolution gets messed up. I want to use my monitor for the main use and close the lid of the laptop.
View 2 Replies
View Related
Feb 18, 2010
I've played around with a second monitor, but so far I haven't found a satisfying solution. I am using a laptop with a GeForce 9600M GS graphics card. I have managed to set up twinview, but my monitors don't have the same height so I'd rather have something like the "seperate x screen" option. Or how I imagine that option would be like. After some problems with the nvidia configuration tool (I couldn't change the xorg.conf, until I read this: [URL] I now have two separate screens, but the second one is all empty, with black background and X-shaped mouse cursor.
There seems to be no window manager running, I can start programs there with -display :0.1 , but they don't get any frame decoration and, which is worse, no keyboard focus. I'd be fine with a fullscreen konsole there, so I don't really need a window manager, but I do need access from the keyboard. I'd prefer a setup that would allow me to easily (without editing xorg.conf) switch between using both monitors and using only one, because I don't always use the laptop at home.
View 3 Replies
View Related
May 1, 2010
It used to work perfectly on Ubuntu 9.10 but I get "input not supported" in the secondary monitor.
View 9 Replies
View Related
Mar 23, 2011
Right now, I need to use a dual-monitor setup. Be it for my casual desktop usage, or to my projects and programs presentations with a slideshow. The latter is critical and that's why I'm here.So, after some Intel Drivers update, some programs started to work nicely, faster and beautifully. But it corrupted my Dual-Monitor Setup. I don't know what to say, I'm totally desperate. I had to show one of my programs to my teacher using a projector, but with the dual monitor corruption, I called in sick today. I need to use the netbook screen to make changes on the program and the second monitor/projector to show the program working.
I'll show some pictures, but I'm without a camera right now, so I'll use one china-phone that's hanging around here to take a picture. Sorry for the quality. Both Monitors, you can see on the right of the bigger one the corruption I'm talking about.
[Code]...
View 1 Replies
View Related
Jul 4, 2010
I have just upgraded from Fedora 11 to Fedora 13 and now can't get my two monitors working as a single "screen" (it worked under F11). I have a GeForce video card with two monitor outputs
lspci -v
01:05.0 VGA compatible controller: nVidia Corporation G73 [GeForce 7600 GT] (rev a2) (prog-if 00 [VGA controller])
Subsystem: Device 1acc:0846
Flags: 66MHz, medium devsel, IRQ 16
[code]...
I then edit the xorg.conf to change the driver from nouveau to nv and I can start X and the LCD displays the desktop at a resolution of 1680x1050 (good) but the CRT just displays random blocks of colour. At this point I also get a kernel crash - see dmesg output attached, but the system is then OK to use. I have tried editing the xorg.conf to add a second monitor and a virtual screen resolution to match the two monitors (1024x768 + 1680x1050) combined (2704x1050) but still only the LCD monitor works, but with the virtual desktop that can be nudged around with the mouse. I would like to get back to using both monitors with a virtual screen across the two monitors.
View 3 Replies
View Related
Sep 11, 2010
I run a dual-screen setup, and the installation detected both screens without troubleowever I want to change primary screen, so the panels and menus will be located in the biggest monitor.I am not able to do this in the System -> Preferences -> Monitors interface. Where can I do this simple operation
View 2 Replies
View Related
Mar 18, 2011
I was using dual monitor on my Fedora 14. I followed leigh123linux's instruction and I was successful. However I cannot use the dual monitor any more - just see the cloned two monitors... I suspect something happened during update. ATI catalyst control center says I need to run it as superuser, but I do not know how to.
View 4 Replies
View Related
May 25, 2011
I have recently installed FC15 on my system. Dual monitor support seems to be broken with my setup. I am using the latest NVIDIA binary blob driver (270.41.19). I compiled my own kernel for it, version 2.6.39.
When gnome3 starts it almost manages to boot up, but then it crashes and gives me the option of logging out. I have my system booting into target 'multi-user.target' since I was doing some other stuff and I use `startx' to start gnome3. I tried running having X use xinerama and not use xinerama, both cause gnome3 to crash, albeit in different ways. Other than that I am running a stock install as far as I know.
If there are some logs I should be looking at for gnome3.
View 4 Replies
View Related
Feb 26, 2011
I was successful in getting the ATI catalyst software to set the displays to maximum resolution. The second display is dark. It shows a white "X" cursor if I move the mouse to the second screen. The KDE desktop configuration manager does not recognize the second monitor.
Here is the output of: cat /etc/X11/xorg.conf
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
Screen "aticonfig-Screen[0]-1" 1920 0
[Code].....
View 9 Replies
View Related
Jan 12, 2011
I have the nVidia GeForce 8500 GT 512MB graphics card, I put it in my system to get a speed boost and for a dual monitor setup, I don't have the proprietary drivers installed I tried installing them, and when I did it asked for reboot, so I did, and when it came back up only one monitor was in use, and it was running very very sluggish, so I opened up the Monitors from the settings and it said to use nVidia's thing, so when I did, I enabled the second monitor, and hit apply, and it asked for a restart of Xorg, doing that came back telling me that no monitors were find, and a reboot brings me straight to tty1... I tried both the recent version and the older one, both did the same thing, I really wanna get my Compiz effects back. is there a way to get this working? I will do anything you ask if it solves the problem...
View 2 Replies
View Related
Feb 26, 2010
i have just installed fedora 11. i have two monitors. how to set up dual monitors in fedora 11 ? i tried a lot to search for a way out, however no joy.
View 2 Replies
View Related
