Fedora :: Make A Copy Of A DVD - Burning With Brasero Or K3b
Aug 17, 2010
I was trying to make a copy of a DVD recently. I started with Brasero, and when that didn't work, I installed k3b. Both came back w/similar symptoms. Neither burned the DVD and seemed to hang up. When either program stopped/hung, I checked on the file that was being captured from the original DVD and discovered that both programs produced a max file of 1.5 GB (source was 6+ GB). I checked the size of the partition where the file was being temporarilty stored and there is 18 GB of space.
View 4 Replies
ADVERTISEMENT
Jun 18, 2010
I'm trying to burn an ISO file with Brasero. It always fails when finalizing.The ISO checksum is ok. The same ISO file is successfully burned in WinXP with CDBurnerXP on the same hardware. So the problem is neither the ISO file nor the hardware.What is wrong with my setup?
View 14 Replies
View Related
Dec 30, 2009
I want to have brasero or k3b do a data check after burning a backup cd. I know that in Nero for Windows you just click on the box that says "verify after burning". For brasero I see that you need an md5 file but it will be to tedious to use an md5 utility to make a checksum for every file and then put in in a txt.
View 3 Replies
View Related
Feb 12, 2011
I have tried burning media files as data into a DVD (-R). Failed every time. It simulates the burn, and when it starts burning it sometimes ejects the media and at other times just says that it cannot eject the DVD and that it has to be done manually. After the DVD is ejected it errors out.Attaching the log file.
View 2 Replies
View Related
Jul 1, 2011
I've been attempting to back up my collection of DVDs to an external hard drive using Brasero. I've successfully ripped many of the DVDs to ISO with Brasero, but am now wondering if it'd be possible to burn these back to other discs if I bought them in the future. In other words, does Brasero leave copy protection in place and just bypass it when ripping to ISO, or does Brasero remove copy protection all together leaving me with an decrypted ISO?
View 10 Replies
View Related
Jul 19, 2010
Today i tried to burn a dvd but i failed. When i was adding the folders, brasero poped up a message saying that it need to rename some files to make them windows compatible,i accepted the change and proceed. Everything was looking good, but qhen it tried to burn, brasero said it cannot burn the image and failed. Asked if i want to save the log file and i did it, but it has no info!
I tried diferent combinations to burn the dvd (removing the files that need to be renamed, even i tried to burn the files to a iso image) and alwas fail exactly with te same error in the same step.I instaled the gstreamer packages from packman and all looks good.Any idea whats going on? Also, if someone has the same problem, maybe it's a bug in brasero that needs to be reported: if so, how can i get usefull info to report it?
View 1 Replies
View Related
Nov 3, 2010
I want to burn an iso file to my DVD-r, i use brasero and yesterday have upgraded to 10.10 NBR (UBUNTU RULES- I HAVE HAD IT FOR 2 YRS!) when i click on the 'burn image' tab on the brasero menu all is well but then when i click the properties and click on 2.0x speed (my friends drive can't read anything set any higher than 2.0x) it does not save that property and it goes and burns at much higher speeds like 3.4X. p.s does anyone know how to get rid of the deleted items icon on the 10.10 NBR menu
View 5 Replies
View Related
Jan 10, 2010
I see there are a lot of other threads on this subject, but I don't find any solution in the other threads. I have been trying to burn cd's directly in Ubuntu, using Brasero, which was already installed. Why does it not work? It says that an "unknown error occurred" or something like that. I don't remember the exact error message right now. I am now burning cd's in "Gnomebaker" which I found in the applications list. This works fine, but only at the speed of 4x, no faster. I hope to get the brasero application to work, as this is the easiest, fastest way, just dragging files to the cd.
View 2 Replies
View Related
Jun 10, 2010
I'm having trouble burning a DVD via command line or Brasero. The DVD Burner is the only IDE Device in the system. Although Disk Utility seems to display it as SCISI. Originally Ubuntu would only see the drive but do nothing when a DVD is inserted it. atleast recognizes the DVD now.
LSHW:
Code:
*-ide:0
description: IDE interface
product: MCP55 IDE
[Code].....
View 1 Replies
View Related
Feb 21, 2011
Brasero keeps simulting before burning even though I have unchecked the "Simulate before burning." option. How can I stop this?
View 1 Replies
View Related
Dec 17, 2010
Does anyone experience burning problem with Brasero? At first, everything was great, but lately I receive all kind of messages (mounting problem, ejecting problem etc.) and burning is unsuccessful.
View 3 Replies
View Related
Apr 7, 2010
I am trying to burn a few video files to dvd using brasero, but after the burning process is about half the way through it simply disappears with no error at all. Only the terminal says
++ WARN: [brasero] Discarding incomplete final frame LPCM stream 0
++ WARN: [brasero] Discarding incomplete final frame LPCM stream 0
**ERROR: [brasero] Horizontal size is greater than permitted in specified Level.
How to burn my videos now.
View 7 Replies
View Related
May 17, 2010
I have tried to burn dvd's using Brasero, after making the dvd etc I choose to burn as a video, but it gets to around 95% of converting the file to MPEG2 or 4 (Tried both) and just sits there doing nothing!I even left it over night to see if that helped but no joy.
View 3 Replies
View Related
Apr 18, 2011
I was trying to burn a dvd to an image file today, and the first one worked no problem, I tried to burn another and I keep getting this error: Data could not be written (Input/output error) Here's my log:
[Code]....
View 5 Replies
View Related
Jul 24, 2010
I'm having trouble burning a data disk. When I burn it ejects the DVD, then saves a log. Here's the last few lines of its contents:
BraseroGenisoimage stderr: /usr/bin/genisoimage: Warning: Directory loop (/home/robert/Desktop/Mount_Directory/var/at/spool dev: 700 ino: 13323).
BraseroGenisoimage stderr: /usr/bin/genisoimage: Warning: Directory loop (/home/robert/Desktop/Mount_Directory/var/spool/postfix dev: 700 ino: 13200).
BraseroGenisoimage stderr: /usr/bin/genisoimage: Warning: Directory loop (/home/robert/Desktop/Mount_Directory/var/spool/postfix/pid dev: 700 ino: 13210).
BraseroGenisoimage stderr: /usr/bin/genisoimage: Warning: Directory loop (/home/robert/Desktop/Mount_Directory/var/spool/samba dev: 700 ino: 13247).
BraseroGenisoimage stderr: /usr/bin/genisoimage: No such file or directory. Non-existent or inaccessible: /home/robert/Desktop/Mount_Directory/Read Before You Install.app/Contents/Resources/ko.lproj/설치 전에 읽어보기.pdf
BraseroGenisoimage stderr: /usr/bin/genisoimage: Warning: Directory loop (/home/robert/Desktop/Mount_Directory/var/cron/tabs dev: 700 ino: 12670).
BraseroGenisoimage stderr: /usr/bin/genisoimage: Error: '/home/robert/Desktop/Mount_Directory/private/var/log/wtmp' and '/home/robert/Desktop/Mount_Directory/var/log/wtmp' have the same Rock Ridge name 'wtmp'.
BraseroGenisoimage stderr: Unable to sort directory var/log
BraseroGenisoimage called brasero_job_error
BraseroGenisoimage finished with an error
BraseroGenisoimage asked to stop because of an error
error= 16
message= "An image could not be created"
BraseroGenisoimage stopping
BraseroGenisoimage got killed
Session error : An image could not be created (brasero_burn_record brasero-burn.c:2839)
Quite a bit of stuff. You can download its full contents. I have no idea what this means and I really would like to make this disk.
View 2 Replies
View Related
Feb 16, 2011
I've encountered a problem when trying to burn a video file to DVD using Brasero Disc Burner. I put the DVD and then open up Brasero and click on "video protect" then I chose the video file I want to burn, I click the "burn" button and choose the settings I want then when press the "burn" button once more.
I then get this screen...
It then ejects the DVD and I get this...
View 6 Replies
View Related
Apr 6, 2011
Brasero Attempts to Eject Medium Before Burning ?
View 9 Replies
View Related
Jul 17, 2011
I'm trying to burn an audio CD with Brasero. Every time I try this, it fails, but it works when writing to an image file. Brasero quits with the following messages in log:
Code:
Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1744)
Unsupported type of task operation
Session error : An internal error occurred (brasero_burn_record brasero-burn.c:2862)
Do you know what could be causing this?
View 5 Replies
View Related
Jan 10, 2011
i cant seem to load mp3s into the stock burning program - "Brasero". i get this error message when i drop an mp3 into the program: "xxx.mp3" is not suitable for audio or video media.
View 6 Replies
View Related
Mar 20, 2011
I've previously been able to copy CDs using Brasero. Now when I try, the program will copy the disk, but instead of pausing to allow you to insert the destination disk, it will simply eject the disk and then quit. I can copy disks by selecting 'copy to image' and then burning the image, but this is a pain.
View 3 Replies
View Related
May 2, 2010
I'm running Lucid RC with all updates and Brasero 2.30.0. I can't do a disk copy with this program. It gives me an error that not all libraries are installed. It first gave an error that cdda2wav was not installed but that is not true and now I get this general error. I'm installing K3B as we speak but I prefer to keep a straight Gnome installation.
View 9 Replies
View Related
Jun 23, 2010
I tried to make a copy of my Audio CD and it asked me to install some plugins, so I installed them. After installing them, it still doesn't copy any audio cd. Can someone tell me how to fix this problem, because GnomeBaker takes long time to copy an audio cd.
View 1 Replies
View Related
Jul 9, 2010
Working on backing up my DVD library. Anyone know why Brasero would fail to copy data due to an input/output error? Movie was Toy Story 2, disc 1.
View 6 Replies
View Related
Mar 1, 2011
How to copy a Read-Only file in Linux and make the copy writable with a single cp command in Linux (Ubuntu 10.04)? The --no-preserve and --preserve seemed to be good candidates, except that they should "and" the mode flags, while what I am looking for is something that will "or" them (add +w mode).
More details: I have to import a repository from GIT to Perforce. I want that all Perforce depot files are Read-Only (that is how Perforce was designed), while all other files that were derived/copied from depot files are writable. Currently if a Makefile tries to copy a Read-Only file then the derived file will also be Read-only. This leads to build-errors when cp tries to overwrite Read-Only file second time. Of course the --force is a workaround here but then the derived file is also Read-Only. Also I do not want to mess with "chmod" after each "cp" command - I will do that only as the last resort.
View 1 Replies
View Related
May 5, 2010
I'm trying to burn mp3's into uncompressed .wav formats on a CD to play on a radio CD player that doesnt accept .mp3 cd's. When I try to add my .mp3 files, I get the error that the file isnt supported by any of the gstreamer codecs installed, with also the following message:
"Make sure the appropriate codec is installed." I have the gst-fluendo-mp3 package installed, I uninstalled and reinstalled brasero,
View 11 Replies
View Related
Feb 17, 2011
I am having a very weird problem, of which I have never heard before. The problem, shortly (I will give details in the following), is that the copy speed between the partition in which I am running my Fedora and another partition where I store backup data is 50K/s, which is extremely slow (it has been usually around 10M/s, almost 200 times faster).
My laptop is a HP Pavillion Dv7 2080 ep, in which I have two disks of 250G. One of the disks is partitioned between two operational systems, Fedora 14 64 and Windows 7 64, and the other disk contains the above referred partition where I store my backups (lets call it backup disk). The problem happens ONLY when I try to copy anything from my home in Fedora to the backup disk. I first thought it could be a problem in the backup disk. Then I login into the windows and made a copy of some AVI files (3G approx) to the backup disk, which went normally, within a few seconds, thus eliminating this possibility. I try therefore to make the inverse process, a copy from the backup disk into my home folder in Fedora. It went normally, copying 4 G also within few seconds, actually with an excellent speed of 50M/s. After searching in google, I saw some people also complaining of slow copy speed (although they had 7M/s, more than 100 times faster than what I have now), and one cause could be that the source file system (in my case the Fedora home folder) would be near its full capacity. I therefore eliminate everything that I could, around 15G, and now I have like 20G of free disk space, which I think is more than enough for everything. However, the problem persists. Some people also said that it could be the type of files and/or amount of data. I therefore tried several kinds of files (from raw data files to AVI and RMVB regular video files), and several amounts of data (from single files with a few Megas to folders with 20G) and in all cases I had the same unacceptably low copy speed of 50K/s.
It seems to be a problem in the software, caused by the updates, since until 10 days ago it was everything ok. However, I usually make the updates whenever they appear but make my backups much less frequently. Therefore I don't know for sure what has changed in Fedora through the updates since the last backup I made, when everything was working fine.
View 5 Replies
View Related
Dec 14, 2009
Is there anything like burning rom from nero or roxio cd/dvd copier. Do you know of any dvd copying program? like without making the image and then burning with just one process just copy the disc sorta program like roxio dvd copier? I wanted to make copies of movies I made a dvd of but aside from image burn which is a hassle to make the image first. is there something for burning on the fly or dvd/cd copying? infrarecorder and cdburnerxp do not work for me at all.
View 3 Replies
View Related
Jul 3, 2010
Both my cd/dvd drives work fine out of xp so they're connected properly.
I tried to use Brasero to burn an iso to a cd; Brasero responds with the message "Please replace the disc with a supported CD or DVD." But my Sony and Maxell discs should be supported, so what could be causing this message?
Is the bash command cdrecord an alternative to Bresaro? If so then what is the command syntax to burn file.iso to a cd in a cd/dvd drive?
View 3 Replies
View Related
Sep 26, 2010
So my goal here is to burn a Fedora13 install DVD. simple, right?I started by inserting the DVD in my drive. Checking the properties, I could see that there were 0 bytes used and 0 bytes free. Total capacity was also 0 bytes. I am not sure if this is a problem.I figured all was well.The error log was too large to upload to the forum (2.5MB) so I included only included the last parts of the log file.My guess is:
1.) I have a bad batch of SONY DVD-R's
2.) There is a Linux driver issue with the burner on my PC (Dell XPS 720)
3.) Somehow there is an issue with the .iso file.
View 4 Replies
View Related
Sep 1, 2010
I have a 160GB harddrive which I installed a F12, would like to upgrade to a bigger drive, but I hate to have to re-install everything.
Recommend a good disk copy utility? The utility should be able to not only copy files, but boot sector and everything. So I just need to make a copy, change my BIOS to boot from the new drive and run everything as before.
View 11 Replies
View Related
