I was trying to burn a dvd to an image file today, and the first one worked no problem, I tried to burn another and I keep getting this error: Data could not be written (Input/output error) Here's my log:
[Code]....
I see there are a lot of other threads on this subject, but I don't find any solution in the other threads. I have been trying to burn cd's directly in Ubuntu, using Brasero, which was already installed. Why does it not work? It says that an "unknown error occurred" or something like that. I don't remember the exact error message right now. I am now burning cd's in "Gnomebaker" which I found in the applications list. This works fine, but only at the speed of 4x, no faster. I hope to get the brasero application to work, as this is the easiest, fastest way, just dragging files to the cd.
View 2 Replies View RelatedToday i tried to burn a dvd but i failed. When i was adding the folders, brasero poped up a message saying that it need to rename some files to make them windows compatible,i accepted the change and proceed. Everything was looking good, but qhen it tried to burn, brasero said it cannot burn the image and failed. Asked if i want to save the log file and i did it, but it has no info!
I tried diferent combinations to burn the dvd (removing the files that need to be renamed, even i tried to burn the files to a iso image) and alwas fail exactly with te same error in the same step.I instaled the gstreamer packages from packman and all looks good.Any idea whats going on? Also, if someone has the same problem, maybe it's a bug in brasero that needs to be reported: if so, how can i get usefull info to report it?
I'm having trouble burning a data disk. When I burn it ejects the DVD, then saves a log. Here's the last few lines of its contents:
BraseroGenisoimage stderr: /usr/bin/genisoimage: Warning: Directory loop (/home/robert/Desktop/Mount_Directory/var/at/spool dev: 700 ino: 13323).
BraseroGenisoimage stderr: /usr/bin/genisoimage: Warning: Directory loop (/home/robert/Desktop/Mount_Directory/var/spool/postfix dev: 700 ino: 13200).
BraseroGenisoimage stderr: /usr/bin/genisoimage: Warning: Directory loop (/home/robert/Desktop/Mount_Directory/var/spool/postfix/pid dev: 700 ino: 13210).
BraseroGenisoimage stderr: /usr/bin/genisoimage: Warning: Directory loop (/home/robert/Desktop/Mount_Directory/var/spool/samba dev: 700 ino: 13247).
BraseroGenisoimage stderr: /usr/bin/genisoimage: No such file or directory. Non-existent or inaccessible: /home/robert/Desktop/Mount_Directory/Read Before You Install.app/Contents/Resources/ko.lproj/설치 전에 읽어보기.pdf
BraseroGenisoimage stderr: /usr/bin/genisoimage: Warning: Directory loop (/home/robert/Desktop/Mount_Directory/var/cron/tabs dev: 700 ino: 12670).
BraseroGenisoimage stderr: /usr/bin/genisoimage: Error: '/home/robert/Desktop/Mount_Directory/private/var/log/wtmp' and '/home/robert/Desktop/Mount_Directory/var/log/wtmp' have the same Rock Ridge name 'wtmp'.
BraseroGenisoimage stderr: Unable to sort directory var/log
BraseroGenisoimage called brasero_job_error
BraseroGenisoimage finished with an error
BraseroGenisoimage asked to stop because of an error
error= 16
message= "An image could not be created"
BraseroGenisoimage stopping
BraseroGenisoimage got killed
Session error : An image could not be created (brasero_burn_record brasero-burn.c:2839)
Quite a bit of stuff. You can download its full contents. I have no idea what this means and I really would like to make this disk.
I'm trying to burn an audio CD with Brasero. Every time I try this, it fails, but it works when writing to an image file. Brasero quits with the following messages in log:
Code:
Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1744)
Unsupported type of task operation
Session error : An internal error occurred (brasero_burn_record brasero-burn.c:2862)
Do you know what could be causing this?
Does anyone experience burning problem with Brasero? At first, everything was great, but lately I receive all kind of messages (mounting problem, ejecting problem etc.) and burning is unsuccessful.
View 3 Replies View RelatedI have tried to burn dvd's using Brasero, after making the dvd etc I choose to burn as a video, but it gets to around 95% of converting the file to MPEG2 or 4 (Tried both) and just sits there doing nothing!I even left it over night to see if that helped but no joy.
View 3 Replies View RelatedI've encountered a problem when trying to burn a video file to DVD using Brasero Disc Burner. I put the DVD and then open up Brasero and click on "video protect" then I chose the video file I want to burn, I click the "burn" button and choose the settings I want then when press the "burn" button once more.
I then get this screen...
It then ejects the DVD and I get this...
Brasero Attempts to Eject Medium Before Burning ?
View 9 Replies View RelatedI have tried burning media files as data into a DVD (-R). Failed every time. It simulates the burn, and when it starts burning it sometimes ejects the media and at other times just says that it cannot eject the DVD and that it has to be done manually. After the DVD is ejected it errors out.Attaching the log file.
View 2 Replies View RelatedI want to burn an iso file to my DVD-r, i use brasero and yesterday have upgraded to 10.10 NBR (UBUNTU RULES- I HAVE HAD IT FOR 2 YRS!) when i click on the 'burn image' tab on the brasero menu all is well but then when i click the properties and click on 2.0x speed (my friends drive can't read anything set any higher than 2.0x) it does not save that property and it goes and burns at much higher speeds like 3.4X. p.s does anyone know how to get rid of the deleted items icon on the 10.10 NBR menu
View 5 Replies View RelatedI'm having trouble burning a DVD via command line or Brasero. The DVD Burner is the only IDE Device in the system. Although Disk Utility seems to display it as SCISI. Originally Ubuntu would only see the drive but do nothing when a DVD is inserted it. atleast recognizes the DVD now.
LSHW:
Code:
*-ide:0
description: IDE interface
product: MCP55 IDE
[Code].....
Brasero keeps simulting before burning even though I have unchecked the "Simulate before burning." option. How can I stop this?
View 1 Replies View RelatedI'm trying to burn an ISO file with Brasero. It always fails when finalizing.The ISO checksum is ok. The same ISO file is successfully burned in WinXP with CDBurnerXP on the same hardware. So the problem is neither the ISO file nor the hardware.What is wrong with my setup?
View 14 Replies View RelatedI am trying to burn a few video files to dvd using brasero, but after the burning process is about half the way through it simply disappears with no error at all. Only the terminal says
++ WARN: [brasero] Discarding incomplete final frame LPCM stream 0
++ WARN: [brasero] Discarding incomplete final frame LPCM stream 0
**ERROR: [brasero] Horizontal size is greater than permitted in specified Level.
How to burn my videos now.
I was trying to make a copy of a DVD recently. I started with Brasero, and when that didn't work, I installed k3b. Both came back w/similar symptoms. Neither burned the DVD and seemed to hang up. When either program stopped/hung, I checked on the file that was being captured from the original DVD and discovered that both programs produced a max file of 1.5 GB (source was 6+ GB). I checked the size of the partition where the file was being temporarilty stored and there is 18 GB of space.
View 4 Replies View RelatedI want to have brasero or k3b do a data check after burning a backup cd. I know that in Nero for Windows you just click on the box that says "verify after burning". For brasero I see that you need an md5 file but it will be to tedious to use an md5 utility to make a checksum for every file and then put in in a txt.
View 3 Replies View RelatedI keep getting the following error when trying to burn a DVD, and unfortunately am none the wiser as to what it means:
Code:
DBus error
This is using both Brasero and K3b, the disk stops writing about halfway through on Brasero and a tenth of the way through on K3b. I'm just trying to burn a data DVD and have tried low & high speeds.
Latest version of 64bit Ubuntu
This happens every time I try to burn an audio CD burning data CD seems to work fine.I open Brasero, click Audio project, drag a couple of FLAC files into it and try to burn, or in this particular case, create an image.A dialogue pops up where I am supposed to tell it where to put the image. I click Desktop but I don't change the file name (something like brasero.cue or whatever).Then it starts doing things but after a short while I get an error message and I am asked to save the log file, which I did and here it is:
Code:
Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1741)
BraseroNormalize called brasero_job_get_action
[code]....
I've been burning a few linux ISOs lately to play around on a desktop I have (archlinux, Fedora, etc) and a few days ago Brasero stopped launching. I tried to uninstall/reinstall Brasero, but it still didn't work. There we no error messages, it would just try to start up, and quit.
I got frustrated and tried to run Brasero from the command line and got this:
Code:
user@computer:~$ brasero
Bus Error
user@computer:~$
I have made numerous audio CD's with Brasero, but recently I had to make one and mid way through the burning process I am given this error: Could not decode stream. Or some variation like that. It ruins the cd and after I get the error I can not eject the disc.
View 1 Replies View RelatedWorking on backing up my DVD library. Anyone know why Brasero would fail to copy data due to an input/output error? Movie was Toy Story 2, disc 1.
View 6 Replies View RelatedGot some iso files and want to run them. Are there any programs around to make this task simple?
View 3 Replies View RelatedI recently switched distributions, I let a guy talk me into switching from Ubuntu 8.04 to Mint 9. Since the switch, I have had a lot of issues that I have mainly worked out myself. I have posted all of it on the Mint forum, but there hasn't been much help available there. I have been told that Mint 9 is based on the newest release of Ubuntu (Lucid Lynx), so I thought I would post over here to see if anyone could help me. The only thing that's still giving me fits are the 3 software programs above. Using k9copy and trying to burn directly to disc, I am getting the error that I took the screenshot of. I then burned it as an iso image and saved it, then tried to use k3b and brasero to burn it that way and got errors with both of those programs.
From k3b:
Devices:
LITE-ON DVDRW LH-20A1S 9L08 (/dev/sr1, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW,
[code]....
I want to do is this: choose the order (other than alphabetical) of the files that I burn to a disc.Brasero doesn't allow it K3b doesn't allow it GnomeBaker doesn't allow it Unless I am missing something, I can't figure out any way other than renaming all my files with a single number and/or letter at the beginning of a file name to choose the order of files. This blows my mind it seems like the most "no duh" feature that everyone would need in any Cd burning program. if I am stupid or if the software developers are stupid. (because I really can't see any other options) This is seriously so important (to me), that I will abandon Linux and go back to Windows if I can't do it.
View 9 Replies View RelatedI run Debian 7.9, kernel 2.6.32-5-686. I have wodim, k3b and brasero installed on my system. I have a file called sound.wav on disk, which I want to burn onto a CD so it can be played on any regular music CD player. Brasero and k3b won't let me do that - I get error messages and the CD does not get written. I used to do it with cdrecord years ago, but as you probably know cdrecord is pretty much out of the game these days; I have wodim installed instead. but I don't know how to do it with wodim.
Code: Select allluiz@debian-luiz-computer:~$ cat /etc/debian_version
7.9
luiz@debian-luiz-computer:~$ uname -r
2.6.32-5-686
Iam trying to burn wave files to a cd that i ripped from a cd when i try burning to gets to 300 meg and stops with these errors CD RECORD RETURNED AN UNKNOWN ERROR (CODE 254) SOMETIMES USING TAO WRITING MODE SOLVES THIS ISSUE Using ubuntu 10.04
View 1 Replies View Relatedi cant seem to load mp3s into the stock burning program - "Brasero". i get this error message when i drop an mp3 into the program: "xxx.mp3" is not suitable for audio or video media.
View 6 Replies View RelatedSo I popped in a blank CD, opened up brasero, told it to create a new video project, added my files.... It told me to install vcdimager, so I did that and restarted brasero. I then told it to burn the video files to the disk as an (S)VCD. It began converting the files before the burn. After the conversion was complete, it gave the message "ejecting medium" and then it ejected the disk. After that, it said it encountered and error and wouldn't do anything from there. I tried a different CD, I tried just closing the disk drive. It just gives me the same error.
View 2 Replies View Relatedrunning lucid and whatever updates are current.Im attempting to burn a avi to dvd format with brasero, but when i hit "burn" brasero sais "ejecting disc" and says that an internal error has occurred. the saved log is blank.any thoughts? i have dvd author and the error message doesnt appear until the disc has ejected. but really it should not be ejecting if it is going to perform a burn.
View 2 Replies View Related