Fedora :: Brasero Is Not Working
Sep 26, 2010
So my goal here is to burn a Fedora13 install DVD. simple, right?I started by inserting the DVD in my drive. Checking the properties, I could see that there were 0 bytes used and 0 bytes free. Total capacity was also 0 bytes. I am not sure if this is a problem.I figured all was well.The error log was too large to upload to the forum (2.5MB) so I included only included the last parts of the log file.My guess is:
1.) I have a bad batch of SONY DVD-R's
2.) There is a Linux driver issue with the burner on my PC (Dell XPS 720)
3.) Somehow there is an issue with the .iso file.
View 4 Replies
ADVERTISEMENT
Jun 15, 2011
I am trying to burn a dvd using brasero but this is part of the log file message.
BraseroLibburn asked to stop because of an error error= 1 message= "SCSI error on write(806960,16): [3 0C 00] Write error" BraseroLibburn stopping Session error : SCSI error on write(806960,16): [3 0C 00] Write error (brasero_burn_record brasero-burn.c:2862)
View 4 Replies
View Related
May 17, 2010
I have tried to burn dvd's using Brasero, after making the dvd etc I choose to burn as a video, but it gets to around 95% of converting the file to MPEG2 or 4 (Tried both) and just sits there doing nothing!I even left it over night to see if that helped but no joy.
View 3 Replies
View Related
Jul 3, 2010
Both my cd/dvd drives work fine out of xp so they're connected properly.
I tried to use Brasero to burn an iso to a cd; Brasero responds with the message "Please replace the disc with a supported CD or DVD." But my Sony and Maxell discs should be supported, so what could be causing this message?
Is the bash command cdrecord an alternative to Bresaro? If so then what is the command syntax to burn file.iso to a cd in a cd/dvd drive?
View 3 Replies
View Related
Nov 25, 2009
One thing I was disappointed with Fedora 12 was the CD/DVD burning application Brasero. I used this application (version 2.6) on Fedora 11 and every time I created a video DVD, i would get an error 'You do not have the required permissions to use this drive'. Even though I was getting this message, it will burn the DVD successfully and I was able to watch the DVD on TV. But getting this error was annoying. I wrote to the developer Luis Medinas who didn't bother to reply. I posted question in Fedora forums and got no answers.
I came across a note on the internet that they have fixed this bug in version 2.8 that came with Fedora 12, so I installed a fresh copy of Fedora 12. But to my surprise this time Brasero came up with a different error.This time I wrote to another developer Philippe Rouquier and I haven't heard from him either. In next version of Fedora I would be very happy to see a "stable" CD/DVD burning application that won't throw errors.It is very annoying and a big turn off as a user. The only time I use Windows is to author DVD's TMPGEnc Authoring Works 4 simply because in Linux there is no program that is sophisticated and stable enough.
View 14 Replies
View Related
Dec 1, 2009
i've tried adding files in my CD which is full of pictures.if i tried listing likeQuote:
[benicio@localhost Pictures in CD]$ ls -l
total 8
dr-xr-xr-x. 2 benicio benicio 8192 2009-12-02 09:22 NITZ BDAY
[code]...
View 1 Replies
View Related
Jun 18, 2010
I'm trying to burn an ISO file with Brasero. It always fails when finalizing.The ISO checksum is ok. The same ISO file is successfully burned in WinXP with CDBurnerXP on the same hardware. So the problem is neither the ISO file nor the hardware.What is wrong with my setup?
View 14 Replies
View Related
Jul 1, 2011
I've been attempting to back up my collection of DVDs to an external hard drive using Brasero. I've successfully ripped many of the DVDs to ISO with Brasero, but am now wondering if it'd be possible to burn these back to other discs if I bought them in the future. In other words, does Brasero leave copy protection in place and just bypass it when ripping to ISO, or does Brasero remove copy protection all together leaving me with an decrypted ISO?
View 10 Replies
View Related
Feb 10, 2010
I recording CD-RW with Brasero and at the end I get the error. The iso-image was write to disk, but lead-in and lead-out seems to be didn't write. What is the problem? This the log of the brasero:
Quote:
Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1848)
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_set_output_size_for_current_track
BraseroBurnURI stopping
BraseroBurnURI called brasero_job_get_action
[Code]...
View 3 Replies
View Related
Aug 17, 2010
I was trying to make a copy of a DVD recently. I started with Brasero, and when that didn't work, I installed k3b. Both came back w/similar symptoms. Neither burned the DVD and seemed to hang up. When either program stopped/hung, I checked on the file that was being captured from the original DVD and discovered that both programs produced a max file of 1.5 GB (source was 6+ GB). I checked the size of the partition where the file was being temporarilty stored and there is 18 GB of space.
View 4 Replies
View Related
Dec 30, 2009
I want to have brasero or k3b do a data check after burning a backup cd. I know that in Nero for Windows you just click on the box that says "verify after burning". For brasero I see that you need an md5 file but it will be to tedious to use an md5 utility to make a checksum for every file and then put in in a txt.
View 3 Replies
View Related
Jul 7, 2009
I download the live 64 and burned it to a disk after it burns to the disk Brasero checks and says "error some files could be corrupted." I burn it slowest burn same thing happen. I downloaded thinking I had a corrupted download. Same thing happen. I never had a problem burning iso until now. What am I doing wrong?
View 6 Replies
View Related
Apr 4, 2010
I recently tried to burn an ISO image to a DVD. Everything seemed to be going fine except Brasero froze at "Finalizing". It stayed there for about 10 minutes before I gave up. When I hit cancel nothing happened. When I tried to eject the drive nothing happened. Not until I shut the computer down and restarted was I able to open my DVD drive. Upon trying to read the disc no computer shows that it has anything on it.
View 13 Replies
View Related
Sep 9, 2010
I have a freshly installed 10.04 ubuntu, but brasero is not starting, what could be the reason? I started it with the option to show errors, but it didn't show any, it just didn't start.
View 3 Replies
View Related
Feb 12, 2011
I have tried burning media files as data into a DVD (-R). Failed every time. It simulates the burn, and when it starts burning it sometimes ejects the media and at other times just says that it cannot eject the DVD and that it has to be done manually. After the DVD is ejected it errors out.Attaching the log file.
View 2 Replies
View Related
Mar 20, 2011
I've previously been able to copy CDs using Brasero. Now when I try, the program will copy the disk, but instead of pausing to allow you to insert the destination disk, it will simply eject the disk and then quit. I can copy disks by selecting 'copy to image' and then burning the image, but this is a pain.
View 3 Replies
View Related
Jul 27, 2011
I am trying to burn a image file to a CD-R, but it fails to start the burn process. Below is the error log.
Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1744)
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_get_action
[code]....
View 1 Replies
View Related
May 7, 2010
I sometimes get downloads, usually of linux OS's where the file is too large for a cd and has to be formated as a dvd. When I try to burn it to a disk, I keep getting something that says I need to insert a blank dvd.
Problem is, I have a blank dvd in the tray all ready to go. The unit I'm using is a Sony external dvd burner hooked up by a usb. Bresero wouldn't touch it, so I installed k3b (this is in Ubuntu10.04) k3b could read that I had a blank dvd in the drive, but when I pointed to what file I intended to burn, I kept getting the "insert blank dvd", and it wouldn't start, even though the screen in the background could see that the dvd was loaded and ready. No problem for cd's, they'll burn like an oil slick on the Gulf of Mexico.
View 3 Replies
View Related
Feb 2, 2011
OpenSUSE 11.3, Brasero 2.30.1 Brasero can't detect dvd-burner. Dialogs, that should allow burner-device selection is grayed out and contain only one option "No disc available". The device itself is known to be working. How to fix this?
View 9 Replies
View Related
Jul 19, 2010
Today i tried to burn a dvd but i failed. When i was adding the folders, brasero poped up a message saying that it need to rename some files to make them windows compatible,i accepted the change and proceed. Everything was looking good, but qhen it tried to burn, brasero said it cannot burn the image and failed. Asked if i want to save the log file and i did it, but it has no info!
I tried diferent combinations to burn the dvd (removing the files that need to be renamed, even i tried to burn the files to a iso image) and alwas fail exactly with te same error in the same step.I instaled the gstreamer packages from packman and all looks good.Any idea whats going on? Also, if someone has the same problem, maybe it's a bug in brasero that needs to be reported: if so, how can i get usefull info to report it?
View 1 Replies
View Related
Feb 26, 2010
I am trying to back up a dvd I own but brasero says it cant without some plugins. Where do I get brasero plugins?
View 5 Replies
View Related
Jun 21, 2010
running lucid and whatever updates are current.Im attempting to burn a avi to dvd format with brasero, but when i hit "burn" brasero sais "ejecting disc" and says that an internal error has occurred. the saved log is blank.any thoughts? i have dvd author and the error message doesnt appear until the disc has ejected. but really it should not be ejecting if it is going to perform a burn.
View 2 Replies
View Related
Nov 3, 2010
I want to burn an iso file to my DVD-r, i use brasero and yesterday have upgraded to 10.10 NBR (UBUNTU RULES- I HAVE HAD IT FOR 2 YRS!) when i click on the 'burn image' tab on the brasero menu all is well but then when i click the properties and click on 2.0x speed (my friends drive can't read anything set any higher than 2.0x) it does not save that property and it goes and burns at much higher speeds like 3.4X. p.s does anyone know how to get rid of the deleted items icon on the 10.10 NBR menu
View 5 Replies
View Related
Feb 18, 2011
I need to burn tracks that total to 80-82 minutes on 80min CDs. However, Brasero stops the burning process right at the start complaining there is not enough space on the CD. I tried having Brasero create an image and burn it with k3b. However, Brasero creates a .cue and a .bin file, but when loading the .cue file, k3b says that it does not seem to be a valid image, even when selecting ".cue/.bin image" or "audio cue file" as the image type. k3b itself refuses to burn .mp3 files without manual conversion. what should I do to achieve my goal?
View 4 Replies
View Related
Mar 9, 2011
Lately, I have found that I have to go back to Vista (yes, old Vista no one loves) to burn an iso file on to a CD-RW. Brasero simply don't even see the CD-RW to even blank it, let alone burn the new iso file. I am using Ubuntu 10.04. As I have Debian 6 (gnome and KDE) I tried the same CD-RW, but neither Brasero, nor KDE's K3B 'saw' the CD-RW.But, the in that Vista, the CD/ISO burning software 'saw' the CD-RW without fail. Btw, this same problem happens with Unetbootin. Linux Unetbootin works worse than the Vista Unetbootin!Now, I have to use Vista to burn CD/DVD/Isos.Is there a some special problem with Linux burning software? I know that some developers are not happy with Brasero,
View 9 Replies
View Related
May 4, 2011
I have no idea why Braseo won't write this album to a CD. I can easily listen to the whole album with Banshee, but Braseo won't burn it I copy and pasted the log file below.
Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1744)
BraseroNormalize called brasero_job_get_action
BraseroNormalize called brasero_job_get_action
BraseroNormalize called brasero_job_get_tracks
[Code]....
I read the log file and I can't make any sense out of it.
View 8 Replies
View Related
May 14, 2011
Every time I try to open Brasero, it opens for an instant and then closes. I can't get it to open.
View 4 Replies
View Related
May 29, 2011
I'm planning to begin using K3B to burn backup data DVDs. Brasero kinda disappoints as burning software. It can't verify the data after a burn. It only offers the maximum burn speed. It doesn't off options like Disk At Once and Track At Once. K3B is oriented towards KDE. Are there any other GNOME burning choices than Brasero?
View 9 Replies
View Related
Jun 21, 2011
Is there some way of setting up Brasero so that it burns without 2 second gap?
View 4 Replies
View Related
Aug 20, 2010
The full log is too long to post here (I could upload it somewhere if necessary) but here is the relevant part.
Code: BraseroWodim stderr: Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: CDB: 2A 00 00 00 04 DA 00 00 1B 00
BraseroWodim called brasero_job_get_flags
[Code].....
View 6 Replies
View Related
