I'm trying to burn an ISO file with Brasero. It always fails when finalizing.The ISO checksum is ok. The same ISO file is successfully burned in WinXP with CDBurnerXP on the same hardware. So the problem is neither the ISO file nor the hardware.What is wrong with my setup?
View 14 RepliesI was trying to make a copy of a DVD recently. I started with Brasero, and when that didn't work, I installed k3b. Both came back w/similar symptoms. Neither burned the DVD and seemed to hang up. When either program stopped/hung, I checked on the file that was being captured from the original DVD and discovered that both programs produced a max file of 1.5 GB (source was 6+ GB). I checked the size of the partition where the file was being temporarilty stored and there is 18 GB of space.
View 4 Replies View RelatedI want to have brasero or k3b do a data check after burning a backup cd. I know that in Nero for Windows you just click on the box that says "verify after burning". For brasero I see that you need an md5 file but it will be to tedious to use an md5 utility to make a checksum for every file and then put in in a txt.
View 3 Replies View RelatedI have tried burning media files as data into a DVD (-R). Failed every time. It simulates the burn, and when it starts burning it sometimes ejects the media and at other times just says that it cannot eject the DVD and that it has to be done manually. After the DVD is ejected it errors out.Attaching the log file.
View 2 Replies View RelatedToday i tried to burn a dvd but i failed. When i was adding the folders, brasero poped up a message saying that it need to rename some files to make them windows compatible,i accepted the change and proceed. Everything was looking good, but qhen it tried to burn, brasero said it cannot burn the image and failed. Asked if i want to save the log file and i did it, but it has no info!
I tried diferent combinations to burn the dvd (removing the files that need to be renamed, even i tried to burn the files to a iso image) and alwas fail exactly with te same error in the same step.I instaled the gstreamer packages from packman and all looks good.Any idea whats going on? Also, if someone has the same problem, maybe it's a bug in brasero that needs to be reported: if so, how can i get usefull info to report it?
I want to burn an iso file to my DVD-r, i use brasero and yesterday have upgraded to 10.10 NBR (UBUNTU RULES- I HAVE HAD IT FOR 2 YRS!) when i click on the 'burn image' tab on the brasero menu all is well but then when i click the properties and click on 2.0x speed (my friends drive can't read anything set any higher than 2.0x) it does not save that property and it goes and burns at much higher speeds like 3.4X. p.s does anyone know how to get rid of the deleted items icon on the 10.10 NBR menu
View 5 Replies View RelatedI see there are a lot of other threads on this subject, but I don't find any solution in the other threads. I have been trying to burn cd's directly in Ubuntu, using Brasero, which was already installed. Why does it not work? It says that an "unknown error occurred" or something like that. I don't remember the exact error message right now. I am now burning cd's in "Gnomebaker" which I found in the applications list. This works fine, but only at the speed of 4x, no faster. I hope to get the brasero application to work, as this is the easiest, fastest way, just dragging files to the cd.
View 2 Replies View RelatedI'm having trouble burning a DVD via command line or Brasero. The DVD Burner is the only IDE Device in the system. Although Disk Utility seems to display it as SCISI. Originally Ubuntu would only see the drive but do nothing when a DVD is inserted it. atleast recognizes the DVD now.
LSHW:
Code:
*-ide:0
description: IDE interface
product: MCP55 IDE
[Code].....
Brasero keeps simulting before burning even though I have unchecked the "Simulate before burning." option. How can I stop this?
View 1 Replies View RelatedDoes anyone experience burning problem with Brasero? At first, everything was great, but lately I receive all kind of messages (mounting problem, ejecting problem etc.) and burning is unsuccessful.
View 3 Replies View RelatedI am trying to burn a few video files to dvd using brasero, but after the burning process is about half the way through it simply disappears with no error at all. Only the terminal says
++ WARN: [brasero] Discarding incomplete final frame LPCM stream 0
++ WARN: [brasero] Discarding incomplete final frame LPCM stream 0
**ERROR: [brasero] Horizontal size is greater than permitted in specified Level.
How to burn my videos now.
I have tried to burn dvd's using Brasero, after making the dvd etc I choose to burn as a video, but it gets to around 95% of converting the file to MPEG2 or 4 (Tried both) and just sits there doing nothing!I even left it over night to see if that helped but no joy.
View 3 Replies View RelatedI was trying to burn a dvd to an image file today, and the first one worked no problem, I tried to burn another and I keep getting this error: Data could not be written (Input/output error) Here's my log:
[Code]....
I'm having trouble burning a data disk. When I burn it ejects the DVD, then saves a log. Here's the last few lines of its contents:
BraseroGenisoimage stderr: /usr/bin/genisoimage: Warning: Directory loop (/home/robert/Desktop/Mount_Directory/var/at/spool dev: 700 ino: 13323).
BraseroGenisoimage stderr: /usr/bin/genisoimage: Warning: Directory loop (/home/robert/Desktop/Mount_Directory/var/spool/postfix dev: 700 ino: 13200).
BraseroGenisoimage stderr: /usr/bin/genisoimage: Warning: Directory loop (/home/robert/Desktop/Mount_Directory/var/spool/postfix/pid dev: 700 ino: 13210).
BraseroGenisoimage stderr: /usr/bin/genisoimage: Warning: Directory loop (/home/robert/Desktop/Mount_Directory/var/spool/samba dev: 700 ino: 13247).
BraseroGenisoimage stderr: /usr/bin/genisoimage: No such file or directory. Non-existent or inaccessible: /home/robert/Desktop/Mount_Directory/Read Before You Install.app/Contents/Resources/ko.lproj/설치 전에 읽어보기.pdf
BraseroGenisoimage stderr: /usr/bin/genisoimage: Warning: Directory loop (/home/robert/Desktop/Mount_Directory/var/cron/tabs dev: 700 ino: 12670).
BraseroGenisoimage stderr: /usr/bin/genisoimage: Error: '/home/robert/Desktop/Mount_Directory/private/var/log/wtmp' and '/home/robert/Desktop/Mount_Directory/var/log/wtmp' have the same Rock Ridge name 'wtmp'.
BraseroGenisoimage stderr: Unable to sort directory var/log
BraseroGenisoimage called brasero_job_error
BraseroGenisoimage finished with an error
BraseroGenisoimage asked to stop because of an error
error= 16
message= "An image could not be created"
BraseroGenisoimage stopping
BraseroGenisoimage got killed
Session error : An image could not be created (brasero_burn_record brasero-burn.c:2839)
Quite a bit of stuff. You can download its full contents. I have no idea what this means and I really would like to make this disk.
I've encountered a problem when trying to burn a video file to DVD using Brasero Disc Burner. I put the DVD and then open up Brasero and click on "video protect" then I chose the video file I want to burn, I click the "burn" button and choose the settings I want then when press the "burn" button once more.
I then get this screen...
It then ejects the DVD and I get this...
Brasero Attempts to Eject Medium Before Burning ?
View 9 Replies View RelatedI'm trying to burn an audio CD with Brasero. Every time I try this, it fails, but it works when writing to an image file. Brasero quits with the following messages in log:
Code:
Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1744)
Unsupported type of task operation
Session error : An internal error occurred (brasero_burn_record brasero-burn.c:2862)
Do you know what could be causing this?
Fedora-15-i386-DVD.iso file, sha256sum is correct. Burning by k3b on a fedora14 system fails again and again at 98.4% of the burning. I downloaded again to another partition and the same happens again. The k3b-debug output:
[Code]...
i cant seem to load mp3s into the stock burning program - "Brasero". i get this error message when i drop an mp3 into the program: "xxx.mp3" is not suitable for audio or video media.
View 6 Replies View RelatedI was able to burn a DVD-RW with K3B (after changing "sudo chmod 4755 /usr/bin/wodim") but when I try to burn to a CD-R it fails after the opc check. I tried changing the write-speed to 8X (since that's the max for this CD-R) but it still fails.
View 3 Replies View RelatedBoth my cd/dvd drives work fine out of xp so they're connected properly.
I tried to use Brasero to burn an iso to a cd; Brasero responds with the message "Please replace the disc with a supported CD or DVD." But my Sony and Maxell discs should be supported, so what could be causing this message?
Is the bash command cdrecord an alternative to Bresaro? If so then what is the command syntax to burn file.iso to a cd in a cd/dvd drive?
So my goal here is to burn a Fedora13 install DVD. simple, right?I started by inserting the DVD in my drive. Checking the properties, I could see that there were 0 bytes used and 0 bytes free. Total capacity was also 0 bytes. I am not sure if this is a problem.I figured all was well.The error log was too large to upload to the forum (2.5MB) so I included only included the last parts of the log file.My guess is:
1.) I have a bad batch of SONY DVD-R's
2.) There is a Linux driver issue with the burner on my PC (Dell XPS 720)
3.) Somehow there is an issue with the .iso file.
One thing I was disappointed with Fedora 12 was the CD/DVD burning application Brasero. I used this application (version 2.6) on Fedora 11 and every time I created a video DVD, i would get an error 'You do not have the required permissions to use this drive'. Even though I was getting this message, it will burn the DVD successfully and I was able to watch the DVD on TV. But getting this error was annoying. I wrote to the developer Luis Medinas who didn't bother to reply. I posted question in Fedora forums and got no answers.
I came across a note on the internet that they have fixed this bug in version 2.8 that came with Fedora 12, so I installed a fresh copy of Fedora 12. But to my surprise this time Brasero came up with a different error.This time I wrote to another developer Philippe Rouquier and I haven't heard from him either. In next version of Fedora I would be very happy to see a "stable" CD/DVD burning application that won't throw errors.It is very annoying and a big turn off as a user. The only time I use Windows is to author DVD's TMPGEnc Authoring Works 4 simply because in Linux there is no program that is sophisticated and stable enough.
i've tried adding files in my CD which is full of pictures.if i tried listing likeQuote:
[benicio@localhost Pictures in CD]$ ls -l
total 8
dr-xr-xr-x. 2 benicio benicio 8192 2009-12-02 09:22 NITZ BDAY
[code]...
I've been attempting to back up my collection of DVDs to an external hard drive using Brasero. I've successfully ripped many of the DVDs to ISO with Brasero, but am now wondering if it'd be possible to burn these back to other discs if I bought them in the future. In other words, does Brasero leave copy protection in place and just bypass it when ripping to ISO, or does Brasero remove copy protection all together leaving me with an decrypted ISO?
View 10 Replies View RelatedI recording CD-RW with Brasero and at the end I get the error. The iso-image was write to disk, but lead-in and lead-out seems to be didn't write. What is the problem? This the log of the brasero:
Quote:
Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1848)
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_set_output_size_for_current_track
BraseroBurnURI stopping
BraseroBurnURI called brasero_job_get_action
[Code]...
I was wondering if there is automatic boot-ability for when you burn a custom over sized cd iso onto a dvd using Brasero? Or does this obtaining this functionality require more effort on my part?
View 1 Replies View RelatedI don't have support for burning MP3's in K3b on Fedora 13. K3b is, for me the one and only best burn in tool and I use it exclusively for backuups to CD's, DVD's, saving music, etc. Various blogs say to go to Livna and install k3b-extras-nonfree but when I tried that, k3b-extras-nonfree was not found.
View 3 Replies View RelatedI want to upgrade from Fedora Core 5 to Fedora 11 without burning a CD. I have a 1.5 Mbps Internet connection. Is this possible?
View 6 Replies View RelatedI was burning a disc with K3b and it was from an ISO; Burn and verify. Everything went successful, but when I put in my 2nd DVD to burn, K3b doesn't recognize it. On top of that when I right click on the icon of a Blank DVD on my desktop, it doesn't have the Eject Volume option there anymore. Does anybody know what could be going on here? why would my Fedora (11) stop burning and ejecting discs all of a sudden?
also, I tried this with multiple DVDs/drives to see if they were bad DVDs/drives and it's all the same result. Also, since I didn't have the eject option on my desktop I had to eject it with K3b from within the program. There's still a problem though.
edit: Some reason K3b is recognising discs again and is burning again. I guess the restart did it and I don't know why it was acting funny.