General :: Fedora 12 After Upgrade - When Start Interactive Boot It Hangs After Trying To Run The Service Local
May 19, 2010
Recently i've upgraded my fedora 11 to 12 using the preupgrade command and now I have a problem booting! when i start the interactive boot it hangs after trying to run the service local, it looks as if its trying to boot because the cursor blinks really fast then blinks normally after a few seconds. no error was stated during the event. what seems to be the problem here?
View 3 Replies
ADVERTISEMENT
Feb 13, 2011
I performed the first update in 4 months to my Fedora 12 Constantine. I also removed a 'dial-up' package (figured i didnt need it) and the KDE package after the update. Firefox was not getting a connection to the internet at this point. The network view showed the ethernet as inactive. Everything besides Firefox appears to work fine.
I restart machine.
It boots until right after the fedora logo fills up. At this point my dual monitors go to sleep. No response from anything. When I start in interactive mode I hit y for everything. Everything works great until libvirtd, libvirt-guest, and local. After y on all three nothing happens. I can type on the screen but no response. It just sits there. I can boot into text mode and do whatever I want. What can I do? What other information do I need to move forward?
I have looked at the Xorg.0.?? i forget what its called. I am not versed in reading the messages in it. Same for the other logs I looked at.
How I troubleshoot Linux problems: Install Linux -> Problem -> Google -> Run Command -> Didn't work? -> Start Over
View 10 Replies
View Related
Feb 13, 2010
I'm using Fedora 12 on my Thinkpad X200 and had no major problems since Installation of the Release Candidate. Unfortunately, since a week Fedora makes trouble when booting:
The system boots some times without any problems, some other times it hangs in the following way:
Code:
Gdracut: Mounted root filesystem /dev/sda1
dracut: Switching root
Welcome to ^[[0;34mFedora
Press 'I' to enter interactive startup
[Code]....
View 4 Replies
View Related
Feb 3, 2009
The Fedora Directory Service LDAP database administration console was working okay until I rebooted the server.
- dirsrv starts okay
- but dirsrv-admin just freezes without any error messages.
How I should get started to fix it?
View 1 Replies
View Related
May 25, 2010
I have a service/daemon that won't start from boot. I have used the chkconfig --add <script name> command that went ok I also used the chkconfig <script name> on and that seems to be fine and I have made the script executable Chmod 777 <filename>. By all account it looks like the script is running at boot the the services has not started. When I do a ps -ef | grep ndb_mgmd this process is no there. the script can be run from the console and sems to run fine!
#!/bin/bash
# chkconfig: 345 70 30
# description: MySQL Cluster management server start/stop script
echo hello Paul >> /tmp/hello.txt
configdir=/var/lib/mysql-cluster/
[Code]....
View 10 Replies
View Related
Dec 19, 2009
I have just upgraded my F11 x86_64 system using the DVD ISO.
After rebooting as requested:
1) Cupsd fails to start - it can't find libaudit.so.1 (this doesn't worry me in itself).
2) Boot process proceeds until starting hald. This gets an OK response, but then the process hangs. No further output appears on the console. Pressing [ENTER] just causes a blank line to appear on the console. Pressing CTRL-ALT-DEL causes a reboot, and the same symptoms re-occur.
I'm tempted to boot with the rescue disk, save a few critical data directories, then start afresh with a clean install, but is there anything I can do to salvage the upgrade?
View 1 Replies
View Related
Jun 21, 2011
I recently upgraded through 'YUM' from Fedora 14 to Fedora 15. The upgrade appeared to be successful until it re booted, ever since then it hangs at
Code:
Started SYSV: Enable monthly update of smolt.
I have downloaded the ISO and burned it to DVD on another system which I used to try to rescue the installation, so far to no avail. My system specs are in my signature below (Laughlin is what I upgraded from).
View 7 Replies
View Related
Apr 6, 2009
Posting from Splashtop as i can't get past keytouch-apid in the boot process,Yeah me bad so i would like to disable it so i can complete the process.Using the interactive startup seemed the way to go but how does one get there before udev starts up?Or is there something else i could try.
View 2 Replies
View Related
Feb 20, 2011
I installed 11.3 first as update from 11.2. The later described error occured.My first approach was to install 11.3 as full install from scratch, the following error did not disappear.System boots fine when doing boot option "confirm" and answer "no" to haldaemon service. Subsequently no usb devices are recognized by the system.
If i do not skip the haldaemon, either in normal as in failsafe mode,haldaemon reports a "NULL Pointer dereference", which is repeated very often.The system finally stops booting, the screen is full with the following three lines, which seemed to be repeated for about a minute.
"BUG: Cannot handle NULL Pointer dereference at 000000049.
IP: [<c02250bc>] no_context+0x6c/0x150
*pde = 000000000
i removed old unused hardware, as i read in a older thread, that this was the cause for a boot up failure with the haldaemon, but nothing changed.
View 7 Replies
View Related
Nov 6, 2010
I need to start a service before network service How to?
View 1 Replies
View Related
Dec 12, 2009
In an effort to reduce/eliminate adware, I installed Provoxy from the F12 repos using yumex. The config file is unchanged except for the addition of the this line: forward-socks4a / 127.0.0.1:9050 .
I note that rpm placed the following (/etc/rc.d/init.d/privoxy), and that in that file are the following lines:
I seem to recall that network manager was changed somewhat to allow those using static ip addressing to NOT do dhcp on boot. Could this be the reason for the non-starting of the privoxy service on boot? Sometimes it starts on boot, and other times I must manually start it in Gnome's System->Services.
If these lines and the network starting is the problem, how do I fix it? Can I comment out these lines in this file, or is there somewheres else where I should be looking?
View 7 Replies
View Related
Apr 16, 2009
I recently setup a file sharing server with FC10 running Samba...
I got it running perfectly and it ran great for a few weeks. I was working on the machine today and tried to reboot it and noticed that it was stuck on FC10's new boot screen. I pressed the esc key and saw that the boot process was stuck on the smb service...
I don't get any errors and the machine doesn't freeze up or anything, it just hangs on the smb service and won't continue with the boot...
Is there anyway that I can get the system to skip the smb service so that I can get into the system? I don't know what's changed or what's causing this sudden hang in the system at boot.
I tried the ubuntu live CD to attempt to go in and edit the /etc/rc5.d scripts to try and skip the smb service start but I am not sure where to look for it...
View 4 Replies
View Related
Apr 9, 2010
I wonder how could I start my ruby on rails mongrel_cluster at the start of my openSUSE 11.0 Server and I don't have a GUI. So the shell solution would be good.
View 1 Replies
View Related
Mar 10, 2010
I am using Debian4 and I have apache under /home/apache/bin/apachectl How to start the apachectl service for every time system restart, Itmust be start automatically. Please tell me how todo or how to write the script, how to configure forrun level 2,3 and 5
View 6 Replies
View Related
Jul 6, 2011
I have a few problems getting a custom service/daemon to auto-start at boot. I'm running ubuntu 11.04 Server amd64 edition. One of the services is a Teamspeak3 server I'm trying to start. I would like it to start up automatically on boot. ts3 already have a script with start/stop commands so all i have done is make a little script for it to get it to run as the correct user.
Code:
#!/bin/sh
### BEGIN INIT INFO
# Provides: ts3
# Required-Start: $all
# Required-Stop: $local_fs $remote_fs $network $syslog $named
# Default-Start: 2 3 4 5
[Code]...
View 7 Replies
View Related
Feb 12, 2010
How can I disable the interactive boot up process? Also what is the pros and cons to doing this? Will this affect my being able to get to runlevel 1?
I have been googling it but not really clear on the pros/cons etc.
I am talking about a server class machine that is in a locked room, not a desktop.
I know it can be turned off in /etc/sysconfig/init # Set to anything other than 'no' to allow hotkey interactive startup... PROMPT=yes
View 4 Replies
View Related
Jul 19, 2011
Cannot seem to set a home root directory and connect as a local account to the FTP Service over SSL. Anonymous works perfectly fine.
View 1 Replies
View Related
Jun 15, 2010
I've been fiddling about with vortexbox (the one before 1.4 I think), for a while. This is a music ripping and server rpm setup using Fedora 11 as the base.
As it was on a test machine, decided to try changing the logical volume sizes of LogVol00 and LogVol02 to fit a few more cd's on 02 before getting a new pc (just to see how it works).
Logged on and opened up the graphic version of lvm (using gnome). Then selected the LogVol02 logical volume, select edit, changed name to LogVol02-Storage, saved and logged out. Rebooted vortexbox since then its been unable to start properly (is this a kernel panic?).
Read up a lot on lvm on the net, have access to Fedora 11 disk 1, so logged on. Eventually managed (I thought to) to change LogVol02-Storage to LogVol02 using lvrename.
However, still refuses to boot completely.
The message it gives is as follows (sort of): Welcome to Fedora Press '1' to enter interactive startup
Setting up Logical Volume Management: 3 logical volume(s) in volume group 'VolGroup00' now active
*** An error occurred during file system check.
*** Droping you to a shell; the system will reboot when you leave the shell.
Give root password for maintenance (or type Control-D to continue):
Loving vortexbox appart from this. Will it be easier just to reinstall everything? If so, is there a way of listing all the changes I've done so I can reproduce (I'm thinking of just looking at all the commands I ran on the CLI).
Otherwise, is there a way of listing all of the commands I ran in terminal and piping them into a file so I can see what I need to do to rebuild after reinstalling?
View 2 Replies
View Related
Jul 6, 2010
I am using centos 5.5 x85_64 2.6.18-194.3.1.el5 The server is hanging at start up due to the follwoing error
udevd[746] nss_ldap reconnecting to LDAP server (sleeping 4 seconds)
udevd[746] failed to bind to LDAP ser er ldap://192.168.0.100 cant contact ldap
It fails and then tries again, and again, each time increasing the sleep time. This is happening before network sercvices are started so ther is no way it can connect to ldap. anyone know a way to fix this problem?
View 2 Replies
View Related
Apr 30, 2011
I was running 10.10 until this morning when I upgraded to 11.04.{Some minor grub complaints in the install but mainly due to me having customised the entries.}I rebooted and went to the new installation, it goes purple and says Ubuntu 11.04 with dots going across, then it hangs and goes to the background text and the last thing it says is "Checking Battery State.I'm on a desktop, so I'm sure the battery thing isn't an issue, it's probably something before or the next command that freezes it.
I booted into recovery mode repaired grub (no change) then went into failsafe graphics mode and it worked ok.My guess is that because failsafe graphics was ok, it might be to do with the graphics driver (ATI HD6970 fglrx driver) but I've no idea.
View 9 Replies
View Related
Oct 31, 2010
Running Ubuntu Server 10.04 32 bit. Sometimes when I reboot it does not start up, It seems to be going through the boot process but then just hangs. I have had a look at the log files and can't see anything, but I'm not really sure what I am looking for.
View 2 Replies
View Related
Jun 13, 2011
I am using Deluge on my Debian server, for a simple auto start at boot I us the following lines in the /etc/rc.localsudo -u User delugedsudo -u User deluge-webDeluge is running after boot but i wane check if its running with User account and not as root.So I did a ps -aux | grep deluge and notice a line that root is trying to run the command sudo -U User deluge-web (i think its trying).
User 1735 1.5 1.0 187680 21604 ? Sl 16:30 0:04 /usr/bin/python /usr/bin/deluged
root 1736 0.0 0.0 20924 1168 ? S 16:30 0:00 sudo -u User deluge-web
User 1737 1.5 1.1 70400 24084 ? S 16:30 0:04 /usr/bin/python /usr/bin/deluge-web
The question is what does this mean? can i leave it running, is it better to kill it if so how to prevent that it happen on start-up.
View 6 Replies
View Related
Aug 12, 2010
I was running Ubuntu 9.10 on my Toshiba A40 Laptop and decided to take the plunge and upgrade to 10.04. Everything seemed to go well until the Restart. Now it only gets to the Splash Screen (Purple Screen with "Ubuntu" and dots under it) and then there is a flash and the text becomes blocks briefly before going to a blank screen! It seems like it might be a video problem but...
View 1 Replies
View Related
Sep 1, 2011
I've recently upgraded to Natty (11.04).The problem that is now occurring, and reoccurring, is like this:- Computer boots, but hangs on a purple screen (nothing on it). Nothing happens, after 15 minutes or so I give up waiting and hard reset.- Boot via Grub (holding shift) into recovery-mode: works fine, but I want the GUI, so I reboot.- After reboot the system hangs again, as mentioned before.- Hard reset again, and booting a previous kernel (2.6.32.8 ): works fine!- Restart again, boots in most recent kernel (2.6.38.10): works fine now.- Try to shutdown/restart again, problem re-occurs every time. So I use the workaround with the extra startup with the older kernel again.and finally typing this.
View 1 Replies
View Related
Jul 16, 2010
I just upgraded my OpenSuSE 11.2 system to 11.3 and have experienced the following problem:
My hard drive was encrypted beforehand, and after the upgrade(which went smoothly) will no longer decrypt. I type in my passphrase at the prompt, press enter and the start up process never resumes. I am able to access the filesystem from the Rescue System option in the install disk. What's strange is that this worked smoothly on another laptop of mine.
View 1 Replies
View Related
May 15, 2010
I was really enjoying the speediness of 9.10 on my HP Pavilion ze4900. Once I got the wireless driver loaded correctly, anyway. Tried to do an on-line upgrade to 10.04, but figured I should have had a hard-wired internet connection when I got installation messages that "Could not set up..." the network. But, installation continued without any other apparent issues. As soon as it rebooted at the end, the problem started. It hangs right after the ubuntu logo, with a completely blank screen.
My questions:
1) Can I get this to start booting properly?
2) If not, what would be the best way to retrieve my evolution mail files, so I can do a clean install? If I boot from a CD, will I be able to retrieve those files and maybe put them on a memory stick?
View 3 Replies
View Related
Jan 31, 2011
Every time I upgrade to the current beta releases (natty) the boot process hangs mostly because of nvidia desktop graphics problems. Luckily the system is still running and remote login to console prompt works too. Is there really no reliable way to reset the graphics (and the rest) to minimum configuration. I am really tired of having to try all the repair options to get the desktop running again. How can Linux ever become a reliable solution if everything takes hours to fix and not even the boot process stays the same from one version to the next.
View 4 Replies
View Related
Nov 24, 2009
It is the first time have I used VPN. I installed OpenVPN in my Fedora 11 computer. I did it following:URL...And I stopped at step 16: service openvpn start . The service can not start up. Even if I disabled Selinux . Does anyone know how to treat this trouble.
View 1 Replies
View Related
May 15, 2010
In the last few weeks I upgraded my Ubuntu from 8.04 to 8.10 to 9.04. No problems, everything went well. But yesterday I tried to upgrade from 9.04 to 9.10. Everything seemed to go OK until the upgrade was finished and I had to reboot. After the reboot, no Ubuntu anymore... I get GRUB, but when I continue to boot the latest kernel, I don't see any harddisk activity anymore after about 2 seconds.
Here on the forums I read that one should run the boot_info_script when having boot problems, so I already did. I booted the system with a 8.04 live USB stick. And here is the result of the boot_info_script:
[Code]...
View 8 Replies
View Related
Sep 12, 2010
I just used Update Manager to upgrade to 10.4 and all I get is the Ubuntu logo screen with the dots and then the screen goes black and there's no other response. This happened after the upgrade completed installing and I received the message to restart the computer. I have never been able to get it to boot.
I can boot fine by selecting the next older kernal although I do get some messages that I don't understand. It all works so I presume it's OK. The kernal that was installed with the upgrade is 2.6.32-24-generic and I've seen other posts about boot problems with it. The laptop is dual boot with Windows XP and Windows boots normally. I saw a suggestion on another thread about booting into an older kernal and then issuing the sudo update-intramfs -u -k command. I tried it and it didn't help.
Next I tried 2.6.32-24-generic recovery mode and I tried the option to fix damaged packages. It seemed to do something although I saw error messages about not being able to find various software sources. I tried a normal boot afterwards and same problem. Recovery mode has another menu option about repairing grub but I don't want to try that. I'm not a power user and this is all over my head. Before I turn the laptop into an unusable door stop,
View 1 Replies
View Related
