Fedora :: 30 Seconds Of No Activity During Boot Sequence
Nov 22, 2009
I have been enjoying Fedora 11 for sometime, and decided to try Fedora 12. All in all it is working, but the boot sequence seemed much slower. I decided to use bootchart to examine the boot process on my old F11 and new F12 installations. The result show F11 booting in ~34 seconds, and F12 booting in ~57 seconds. Interestingly, the first 30 seconds show that only kthreadd, khelper, and ata/0 are running. CPU and disk utilization are both zero during this 30 seconds span, then all of a sudden everything starts loading, CPU and Disk utilization spike up, and ~23 seconds later I get to the login screen. I sent an email to Harald Hoyer about this, and to my surprise he was kind enough to respond. He suggested I check the BIOS to make sure I had disabled the floppy drive, which I did. The problem persists, so I was wondering if anyone here was having a similar issue and if so how they have dealt with it. I have blacklisted the floppy module (just to make sure)
I have something that is poling my hard drive about every two seconds. It's really not necessary I don't think. I am not sure how to find out what process it is. My memory usage is pretty low and I am not using any swap.How do I go about tracking the culprit down?
Since the yesterdays updates the boot process lasts terribly long of my Fedora 12 on a x86_64 system. It lasts about 10 minutes or longer. The strangest thing is that if I press keys (any of them) it goes faster (about 1 minute). There are no errors or other things which might be the reason for such a behaver.
fedora install, system with 2 hdd's. 1st xp os 2nd will be xp pro and fedora.question is how to set up the boot sequence so that i can boot from any of the 3 os's?
I've sucessfully installed Fedora 11 into a SunVirtualBox machine, but I would like to elimate from the boot sequence the GUI Startup. If I need it I could invoke the GUI from the command line. How I coud get this?
I need to do a NFS mount after my PC boot up. So I put an entry in root's cron to do it:
@reboot /bin/mount sun:/mynfs /mnt/sun/mynfs
The mount occasionally fails. But when I manually mount after booting, it always succeed. So I suspect maybe the cron sometimes got executed before the network was started?
Is there a way to delay the mount until after the boot sequence finishes? You know, other than put the command in a script and add a sleep in front of it?
I Just clicked on the Desktop Effects menu item and the system rebooted and now I can only log in through a tty. I have to use "startx" to get X to start up then I seem to have no file manager.
It seems Desktop Effects and my nvidia driver don't play well.
I've been fiddling about with vortexbox (the one before 1.4 I think), for a while. This is a music ripping and server rpm setup using Fedora 11 as the base.
As it was on a test machine, decided to try changing the logical volume sizes of LogVol00 and LogVol02 to fit a few more cd's on 02 before getting a new pc (just to see how it works).
Logged on and opened up the graphic version of lvm (using gnome). Then selected the LogVol02 logical volume, select edit, changed name to LogVol02-Storage, saved and logged out. Rebooted vortexbox since then its been unable to start properly (is this a kernel panic?).
Read up a lot on lvm on the net, have access to Fedora 11 disk 1, so logged on. Eventually managed (I thought to) to change LogVol02-Storage to LogVol02 using lvrename.
However, still refuses to boot completely.
The message it gives is as follows (sort of): Welcome to Fedora Press '1' to enter interactive startup
Setting up Logical Volume Management: 3 logical volume(s) in volume group 'VolGroup00' now active
*** An error occurred during file system check. *** Droping you to a shell; the system will reboot when you leave the shell.
Give root password for maintenance (or type Control-D to continue):
Loving vortexbox appart from this. Will it be easier just to reinstall everything? If so, is there a way of listing all the changes I've done so I can reproduce (I'm thinking of just looking at all the commands I ran on the CLI).
Otherwise, is there a way of listing all of the commands I ran in terminal and piping them into a file so I can see what I need to do to rebuild after reinstalling?
I used LILI to create a live USB key - I believe I used the 686MB version. Everything worked fine. I wanted to try the full DVD install, so I did the same with that image.
Now, it doesn't matter if I load it in virtualbox or if I boot up my comp with the USB stick, I get to the Linux boot menu, choose "Persistent Mode", and then below it shows "Automatic boot in 10 Seconds..."
Once it counts down to 0 it just resets to 10, and keeps on counting!
Some days ago I switched from Ubuntu to Fedora and it is just great, Gnome 3 looks awesome. I waited for the installation of Fedora until I got my new OCZ Vertex 2 SSD and the first benchmarks were astonishing. The SSD has an average Read/Write speed of ca. 270Mb/s. Well, now I installed Fedora 15 and I was expecting a boot time of less than 20 seconds, but in fact it takes 30 seconds. By way of comparison, Ubuntu takes on my old HDD about 27 seconds, so a bit less than it takes on the SSD.
Then I tested some software, I started Eclipse and compared the start time on Ubuntu (HDD) and on Fedora (SDD). Starting Eclipse from the HDD took about 6 seconds while starting from the SSD took about 7 seconds. The differences in the results are not big, but taking into account that the SSD is at least twice as fast as the HDD the results are really strange. Now I would like to ask you how I may increase the performance of Fedora on my SSD?
Some notes about my hardware: Intel Core2Duo 3GHz 4GB Ram Sata2 On this screenshots you can see both drives in comparison, the ssd is much faster.
i could manage to install fedora 12 on my laptop (asus f6a) using the iommu=off option, but when i try to boot it i just reboot without even seeing the fedora logo, i just see the the prompt for 5 seconds and then it reboots.
recently sent up another computer as follows:Two sata drives. Windows 7 was installed on the first drive(sda)and booted successfully. This drive was disconnected ( I have had some installs where Unbuntu wipes out the existing C drive eventhough I am installing to D) and Ubuntu was installed to the second drive (sdb). At one point I had to rebuild the grup on the Ubuntu drive and was careful to make it installed on the Ubuntu drive. To my surprise when the PC booted up I saw the Grub menu with a menu entry for Windows. The Windows drive was always the primary drive before the Ubuntu install. I was planning on the Windows drive being the boot drive and using a boot manager to determine where to go from there. If I utilize the BIOS boot option (F12) I can boot each drive individually. I cannot in BIOS set a particular drive to boot - just a hard drive. Everything is working I am just curious why the primary drive does not boot first. IN BIOS the Windows drive is a primary SATA with a lower number that the Ubuntu drive which is listed as a secondary drive.
I am facing a problem with my AT91SAM9260 customized board. Board is almost same as the evaluation kit.
I could download the binaries ( Bootstrap-v1.16, u-boot-1.3.4, linux kernel 2.6.20) successfully to the DATAFLASH/NANDFlash in my board by using atmel SAM-BA tool with usb/serialport/jlink.
Here I describe the problem.
When I power up the board, boot strap is not jumping to U-boot location, in the normal boot sequence and board stuck with bootstrap.
But when I disconnect/connect the JTAG USB cable ( provided with SAM-BA ICE) , it's jumping to u-boot location and booting the board properly. I'm getting the same error in NAND FLASH also.
I have tried one more test case.I copied bootstrap binary at the flash location, [location which is specified for u-boot binary] instead of U-boot.bin (location: 0x8400 in dataflash), I got continous bootstrap debug messages in my console. [ So can I conclude SDRAM doesn't have any problem? ]
Im trying to install Fedora 10 on to my HP Pavilion a340a (full product specifications: [url] ), i boot from the cd and it says "Automatic boot in 10 seconds..." etc, i get past that screen and am then at a screen with 2 shades of blue and a white bar moving at the bottem of the screen towards the words "Fedora 10", on the next screen, the log on screen, all the text is jumbled up and distorted, and everything appears frozen, except that i can move the mouse. I am not sure what the problem is but i know its not the cd because after having problems with hp pc i decided to try it on my Acer Extensa 2300 laptop (1.5ghz, 1.2gb ram, 40gb hdd, 32mb intel integrated graphics) and that installed fine, without a problem. This has led me to beleive that Fedora may not be liking the intel graphics on my HP Pavilion, and i dont know why. i really want to use Fedora 10 on my desktop. I should mention that i want to dual boot Windows XP and Fedora 10 on Pavilion, windows is already installed.
Why is the Linux boot sequence is organized the way it is?Power on + BIOS runs hardware initialisation and self tests, LILO/GRUB etc... but why is it organised the way it is?Would I be right saying it is primarily for debugging purposes?
To change the boot up sequence of Ubuntu and XP I opened the terminal in Ubuntu and entered ( Sudo gedit /boot/grub/menu.lst ) in the command line and pressed <ENTER> , another line ask me for password and when I try to enter it , nothing happens , the cursor just blinks.Can someone tell me what I am doing wrong.
Is there a way to interrupt the boot sequence, or execute it line by line? Alternatively, after a command has executed and the scree fills up, is there any way to "page up" on the screen?
I would like to know as to how to save a boot order sequence...In my desktop PC I have a gigabyte MOBO housing Pentium Dual Core processor...
Whenever I have to boot from an external USB , I have to press del at boot , go into CMOS features and change the Order of Booting 1-DVD 2 USB-FDD 3. USB-HDD 4. Local Hard Disk
The problem is that everytime I have to repeat the above to boot from USB...I am also confused between USB - HDD and USB - FDD...Some utils partition and use the USB like a HDD while it is not the case with FDD I guess
How do you freeze the boot order so that on inserting any USB / External HDD at boot , the system should give it the priority over local hard disk..
Also in Giga MOBO I noticed that there is no "generic USB" mentioned in BIOS...It lists the USB device by name say "Kingston Data Traveler " "Sandisk Micro" etc ....
What should I do to make the boot order permanent?
I am trying to setup a debian sid on my Chromebook (Asus C201 / Rockchip ARM).I've followed the howto here : URL.....Debootstrap ok, config ok, kernel repack ok... everything went fine until the first boot.When i boot from the sd card, nothing seem to happen. The screen stay black, no text appear.Back in chromeos, i check the syslog and the kernel did load successfully.
It seems after the kernel loads, nothing happen next.
Kernel is on mmcblk1p1 Rootfs is on mmcblk1p2 My kernel config is : Code: Select allconsole=tty1 printk.time=1 nosplash rootwait root=/dev/mmcblk1p2 rw rootfstype=ext2 lsm.module_locking=0
So I turn on my pc today, select ubuntu studio from GRUB and it freezes during the splash sequence - I hard shut down and the power back on and. nothing. Hard drive light illuminates once then stays off. External HDD powers on. Processor light comes on but no graphics - no manufacturer stuff, no bios entry - nothing.
I am attempting to boot Ubuntu off of a USB drive. The USB drive was created via the USB creator in the .iso file dowloaded from Ubuntu. But for some reason when I go into my BIOS and boot from the USB drive, it spits out one line of syslinux and copyright information ending in "et al" and then a flashing cursor but doesn't go any further. I would provide a screenshot but that isnt an option at the moment with not being able to get past the first line of booting. Also, I have never used Ubuntu as this is my first attempt at running it and it is obviously not going the best.
I have a box with Novell Suse linux installed. It asks for username and password I do not have and cannot figure out. I also have a SantaFe distro CD with which I would like to replace the Suse on the box. I cannot get the box to BIOS to change the boot order to boot from CD. I would like to break free of Windows, but can't seem to get there from here...
I'm currently using an external screen with my laptop at home connected with a serial port. When I'm in X, my laptop display is automatically disabled, when the external screen is connected. Is there a way to do this also at boot time? Where do I have to configure this? Also I'd like to have my login shells on my external screen, when switching to them out of X.
I am still new to linux and just installed opensuse 11.1 and all was fine untill I went to yast, software and ran the online update. Now when I boot up linux it takes a long time and after suse is booted up the HDD led is constant. I did know enough to add VGA=normal in grub and this is what is is displayed when it hangs:
<6>ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 21 <6>ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 21 <4>ata1: link is slow to respond, please be patient (ready=-19) <3>ata1: SRST failed (errno=-16) <6>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) <4>ata1: link online but device misclassified, retrying ..... <4>ACPI: PCI Interrupt Link [ASA1] enabled at IRQ 20 <6>sata_nv 0000:00:0e.1: PCI INT B -> Link[ASA1] -> GSI 20 (level, low) -> IRQ 20 <5>sata_nv 0000:00:0e.1: Using SWNCQ mode <7>sata_nv 0000:00:0e.1: setting latency timer to 64
It looks like it has something to do with the HDD. I Have 2 HDD's in the computer with linux on the second drive. I also noticed that before updating I could access my ntfs partitions in nautilus and now they do not show up and are not in my fstab file and I do not know how to add them back in.
I had to install grub manually after the install. GRUB loads fine and I can select the Ubuntu option, but it simply stays on a purple screen with no HDD activity. When I go into recovery, it falls to a busybox command-line and says "ALERT! /dev/disk/by-uuid/(string of letters and numbers) does not exist". I use a RAID array which causes me loads of problems, but I'm fairly sure, from what I've read of similar problems, that this is due to the update it did during installation. I suppose I could try installing it without internet connection, but then presumably the same thing would happen as soon as I ran update-manager? I have actually tried the reinstall several times as well as reinstalling GRUB.
How to boot debian on an RK3288 based device (that isn't a chromebook?). Been trying to do so myself, but to no avail.
The closest match to my device is this one in the sense that it uses the same SoC - an RK3288. However my device is not a chromebook; instead it is called an "RKM MK902II". Unfortunately I cannot find any information on how to boot this device (it does have a micro sd card slot it can boot from, though I'm guessing it needs some sort of bootloader to be written onto a micro sd card in a specific way, but how!).
Interestingly the device I have is running some sort of version of ubuntu. Though how it boots it is an absolute mystery!
I've tried searching around on the 'net for a while now and apart from a script and a few "distros" distributed as image files, I can't really find anything at all. Looking for info about this device or RK3288 chipset?
I tried a LIVECD from Artistx: ArtistX - eXtra ordinary art tools Index of /mirrors/artistx And now my computer boots up into a kernel command line screen instead of the GUI type screen where I enter my name and password. Anyone know what this ##$%@ disk changed on my computer and how do I get it back to normal? Fail safe mode boots ok. On the LIVECD disk I selected boot from hard drive which worked but after I turn off my computer and restart, it goes back into that command line sign in screen and stays there.
