I get the following message in my F11 system when I try to yum update system.
ERROR with rpm_check_debug vs depsolve:
kernel-uname-r = 2.6.27.37-170.2.104.fc10.i686 is needed by (installed) kmod-nvidia-2.6.27.37-170.2.104.fc10.i686-180.60-1.fc10.6.i686
[code]...
I'm not able to login after system update tonight. whenever I try to login, the screen goes black briefly and it automatically logs off.
I tried both kernel, 2.6.35.6-64.fc14.x86-64 and 2.6.35.6-45.fc14.x86-64, but failed.
I have installed fedora 13 on my laptop and when I try to update the system using update manager system gives me the following error. code...
View 7 Replies View RelatedI am running Fedora 12 on an Intel Core 2 Duo system.
I ran a software update which installed a new kernel (2.6.32.23-170.fc12.i686.PAE) along with many other things.
I am now unable to run VirtualBox which I had installed and running successfully before the update.
I tried removing and reinstalling VirtualBox from YUMEX, and rebooting. This did not help.
When I launch VirtualBox from a terminal, it produces the following output:
VirtualBox: supR3HardenedMainGetTrustedMain: dlopen("/usr/lib/virtualbox/VirtualBox.so",) failed: VBoxVMM.so: cannot open shared object file: No such file or directory
I'm not sure what it is complaining about. The files VirtualBox.so and VBoxVMM.so both exist in the /usr/lib/virtualbox directory.
What can be done to get VirtualBox working again on this system?
I've tried to use the GUI tool for update system in Fedora 10. It listed all of the available updates successfully, but it have not any response when i click the 'Update System' button~
View 2 Replies View RelatedI Have Installed Ubuntu 10.04 according to the steps mentioned in the following pdf [URL] the problem is after installation i am unable to connect to internet. i have connected internet on LAN but cannot detect it on console. unless i update the system i cannot get GUI.
View 9 Replies View RelatedYesterday did a fresh install of UNR 10.10, all went well with that. After the first log in it found the Wifi and checked for updates. Updated the system and then it went to restart the system due to a Kernel upgrade. Once I did this, that is when the issues started. Firstly when booting up, it just sat at the Ubuntu boot up screen saying:
"The disk drive for /home is not ready yet or not present"
'Continue to wait; or Press S to skip mounting or M for manual recovery'
So firstly I hit S, this presented me with several error boxes (as expected due to setup/config files sitting in my /home folder), I then found that I wasn't able to connect to my wifi (not that it can't see it, just that it won't connect) each time I try and connect it just comes up saying that the wifi is disconnected. Of all the things to fail I was expecting the Bluetooth to and it didn't. Anyway the computer specs are: MSI Wind U100, upgraded to 2 Gig Ram, 320Gig HDD, and wifi card is the Realtek RTL8187SE.
HDD is setup as:
4Gig for Swap (/dev/sdb1)
6Gig for / (/dev/sdb5)
Remainder is /home (/dev/sdb6) (I did make this an encrypted partition)
Can't do any screen shots as I am not able to connect to the internet on that machine (having to use another computer in the house). I have tried to view the fstab file and I am not able to.
Yesterday i have installed F14 and then went to the comand line to update the system via yum update. It was about 860MB of updates in 430 packages. The strange thing is that only one package was a delta rpm and all other were normal rpm. Is Fedora giving up on presto or it needs some special configuration?
View 1 Replies View RelatedI can't update, download packages, or even diagnose due to an elusive error.
If I try to update or check using terminal I get this:
I even tried to restart in recovery mode to check for broken packages and I got this error:
I usually find answers in the documentation but this time I'm really stumped. I am Running 64 bit Ubuntu 9.04.
I have been running Fedora 15 for a about an month and a week ago I started to get messages on two machines to say it could not update. I am using the "software update" package. I am using Fedora 15 64 bit. Installed from a DVD originally on one machine and the other was updated from Fedora 14. Each machine is on a different network. I start the "software Upates" package. it gets the list of packages to be updated and then when I go to "install updates" I get the following message.
"Transaction error An unspecified transaction error has occurred. Under more details; Could not add package update for fedora-release rawhide-15-3 (noarch) update: fedora-release-rawhide-15-3 noarch" The repository for fedora is active in the repository list.
I've just updated to f12 from f11 and I can no longer mount 4 of my hard drives. The hard drives used to be in a raid array on a highpoint raid card, I removed this partitioned and formatted the hard drives and have been using them for about the past year without a problem. I am using a Asus P5E-VM motherboard. All hard drives are running ext4. The only thing I've really tried is noprobing the effected hard drives to no success.
p.s. I don't want to repartition/format these as they have some data on which I'd prefer not to loose.
# uname -r
2.6.31.5-127.fc12.i686.PAE
# mount /dev/sdb1
mount: special device /dev/sdb1 does not exist
#blkid
/dev/sdc: TYPE="highpoint_raid_member"
[Code].....
My system (recently installed FC12) is reporting that there are 563 updates available. When I try and install the updates I get to the stage of "Getting list of updates" and receive the message "The package identifier was not well formed". The details are "Package_ID cannot not be parsed". It further says that "This normally indicates an internal error and should be reported."
View 4 Replies View RelatedI am unable to login following an update, Fedora 13. The screen splashes after crond is loaded. The GUI does not come-up. In text mode i can't login as root or other user accounts except in kernel 1. I can access some files via FTP command. Is the password file corrupt ?
View 14 Replies View RelatedWhen trying to do a Software Update via the Administration area I'm getting the following:
failed to install signature: Traceback (most recent call last):
File "/usr/share/PackageKit/helpers/yum/yumBackend.py", line 2926, in install_signature
self.yumbase.getKeyForPackage(pkg, askcb = lambda x, y, z: True)
File "/usr/lib/python2.6/site-packages/yum/__init__.py", line 4329, in getKeyForPackage
[code]....
I am new to linux but have install fedora 14 twice on my computer now and about to go for three. The first time I installed it, ran the updates using yum update, downloaded and installed wireless driver b43 then tried to change boot order to boot to win 7 first and thought I messed it up when I did that. It took over 20 minutes just to boot up and log in and about 10 minutes just to open a terminal window. So re-installed it had a friend who is very good with fedora change the boot order, then did the yum updates and wireless driver install again today. Now when I reboot my computer it no longer automatically boots to windows, and does not even give me the option to boot to fedora.
I believe it's the grub menu but the boot menu that I used to get if i wanted to change the boot to fedora is now a different color (white & black) and doesn't list the option to boot to fedora. Currently I do not have the DVD I used to install and was hoping there was a way to fix it without re-installing it. The boot menu does give me the options of hitting 'e' to edit something or 'a' to edit the kernel arguments, and I have no idea what either of them are. But the 'a' does not do anything, 'e' brings me to another menu option with chainloader and rvnotify or something similar. And there are more buttons to edit stuff and 'b' to boot from the choices but they both boot to win 7 not fedora.
I'm using F14 and when I try to update I get this report-
' no such table: packages'
and when I try using add/remove software I get this
'failed to use search generator: no such table: packages'
what these mean. I don't want to take guesses and do something wrong.
Added- searches produce this thread as number one topic others give me very little if anything to go on.
First of all after installing i was not able to update my fedora 12 using the GUI version.Ultimately i have done the updation using
su -
yum update
after updation my boot menu changes as
Fedora (2.6.32.11-99.fc12.x86_64)
Fedora (2.6.31.5-127.fc12.x86_64)
Others
[Code].....
Every time I attempted to run "yum update" dependencies failed to resolve citing kernel version problems. I cleaned out a bunch of old versions of kmod-wl that were still on my system (some dating back to my old f12 install) and still had no luck. Finally I removed kmod-wl altogether so that I could update the rest of my system and hoped I could just re-install it once the update was finished. No dice. "yum install kmod-wl" still produces this message (identical to what "yum update" gave when the old kmod-wl was installed):
Code:
Error: Package: kmod-wl-2.6.34.6-47.fc13.i686-5.60.48.36-1.fc13.14.i686 (rpmfusion-nonfree-updates)
Requires: kernel-uname-r = 2.6.34.6-47.fc13.i686
Installed: kernel-2.6.33.5-124.fc13.i686 (@updates)
kernel-uname-r = 2.6.33.5-124.fc13.i686
[code]....
I am not able to connect to network after update F13 to 2.6.34.7-61. Because there is "no netwokr decvice" IAW network manager. There is nothing in system log that abonormal. But, there is a fail initialization in the boot message. "applying firewall rules: iptable v1.4.7:Ip6table-restore: unable to initialize table .filter error occur at line 3 try Ip6table-restore -h or Ip6table-restore -help for more detail"
so, I tried the comment at terminal with root clearance, it just give some feed back about how to use this command. When I tried out other options. none of them work. There is no feed back form the terminal other than previous display and blanking cusor.
I assume it was the firewall preventding me to connect to network. And I complete disable SELinux and reboot. Problem remain, no network device. Check network device driver. There all inplace. Tried using old kernel, unble to boot up X window, presumably old driver has been deleted.
BTW, after two consecutive update failure (2.6.34.7-54 kernel panic VFS? problem, 2.6.34.7-61 no network connection), I assume Fedora Quality should consider review their update release process. Since the probability of fedora releasing bad update is increase a lot after fedora 11.
After running update last night from 2.6.35.9-64 to 2.6.35.10-68 my laptop fails to start. Boot process goes most of the way to startup and then hangs just before login screen. Not sure what else to give as far as info.
View 12 Replies View RelatedI was updating my F12 and the system crashed .. no idea why.. anyway I cannot boot anymore using the kernel 2.6.31.9-174, but I can boot using the 2.6.31.6-166 ... now when I issue the yum update, the system says its up-to-date...is there any way to 'force' the yum to update the system again ?
View 14 Replies View RelatedI was doing software update under administration, but I can't update. I just installed F12 I get errors like the ones below.
Click on links for the pics [URL] and [URL]
I hace two fedora 12 systems running currently and both are giving this error upon update..
Error Type: <class 'yum.Errors.RepoError'>
Error Value: Error getting repository data for installed, repository not found
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in <module>
[code]...
My system system suffers from frequent kernel panics, which I think are due to gnome-shell with the nVidia driver. (I see no panic message and nothing is logged, but I've enabled magic SysRq and it makes no difference.) Twice this has occurred during yum-update's install stage, which is making me wonder. Uum-update then complained about an unfinished transaction, so I ran yum-complete-transaction as suggested. I've also tried yum-clean-all and rebuilding the RPM database, suggested in other threads, but I'm still seeing the following errors on yum-update:
--> Finished Dependency Resolution
Error: Protected multilib versions: 1:cups-libs-1.4.7-3.fc15.i686 != 1:cups-libs-1.4.6-15.fc15.x86_64
Error: Protected multilib versions: libuuid-2.19.1-1.3.fc15.i686 != libuuid-2.19.1-1.2.fc15.x86_64
Error: Protected multilib versions: krb5-libs-1.9.1-5.fc15.i686 != krb5-libs-1.9-7.fc15.x86_64
You could try using --skip-broken to work around the problem
** Found 23 pre-existing rpmdb problem(s), 'yum check' output follows:
1:NetworkManager-0.8.9997-5.git20110702.fc15.x86_64 is a duplicate with 1:NetworkManager-0.8.9997-4.git20110620.fc15.x86_64
1:NetworkManager-glib-0.8.9997-5.git20110702.fc15.x86_64 is a duplicate with 1:NetworkManager-glib-0.8.9997-4.git20110620.fc15.x86_64
1:cups-libs-1.4.7-3.fc15.x86_64 is a duplicate with 1:cups-libs-1.4.6-15.fc15.x86_64
ibus-1.3.99.20110419-9.fc15.x86_64 is a duplicate with ibus-1.3.99.20110419-7.fc15.x86_64+ More errors of that ilk.
I don't know where these 32-bit packages have come from this is an x86-64 system and the only x86-32 stuff I've intended to install is the Adobe flash plug-in. Also the later dupes are different 64-bit versions. I've tried "package-cleanup --cleandupes" as suggested in this thread: [URL]. It wants to remove the old versions, but also wants to remove packages that depend on them, including clutter, so I cancelled that. The first time round I was left with a barely usable system and had to reinstall, which I'd rather avoid, especially if this is going to be a regular occurrence. I'm not familiar with RPM (or kernel panics for that matter).
I'm using Fedora 13 and I'm trying to update Gnome Shell on it. I use this command:
Code:
yum install gnome-shell --releasever=14 --disablerepo=rpmfusion*
but I get:
Code:
Loading mirror speeds from cached hostfile
fedora/metalink | 13 kB 00:00
updates/metalink | 17 kB 00:00
[code]....
how can I update gnome-shell package using yum?
When i am updating suddenly the power gone.what i have to do now.
View 11 Replies View RelatedOn my ageing laptop with Intel IPW3945 wireless adapter which has always worked extremely well.... Fedora 13 with the latest NetworkManager. Seems that wireless speed has slowed to a crawl.
Code:
[glenn@leonardo ~>$ rpm -qa | grep NetworkManager
NetworkManager-vpnc-0.8.1-1.fc13.i686
NetworkManager-pptp-0.8.1-1.fc13.i686
[code]....
I am unable to boot my Fedora 14 after last nights kernel update. When I start the boot up and hit F2 the system fails after outputting the line : Starting vservers of type 'default'. At some point the console displays an error message :
serial8250 : Too much work for irq17
How do I restore my previous version? I know some people have suggested in the past - just modify the grub.conf but how? When I boot off the cd I only get access to the liveuser disk. I need to have access to my own /boot/grub/grub.conf file.
is their any method to remove effects of last system update in fedora11?
View 1 Replies View RelatedI just switched over from Ubuntu to Fedora 12 (KDE) and am having a problem with installing packages and updating my system.
When I use KPackageKit to update my system, I get this error:
Code:
Error Type:
Error Value: Error getting repository data for installed, repository not found
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in
main()
[Code]....