Fedora :: Unable To Mount After Update To F12
Nov 23, 2009
I've just updated to f12 from f11 and I can no longer mount 4 of my hard drives. The hard drives used to be in a raid array on a highpoint raid card, I removed this partitioned and formatted the hard drives and have been using them for about the past year without a problem. I am using a Asus P5E-VM motherboard. All hard drives are running ext4. The only thing I've really tried is noprobing the effected hard drives to no success.
p.s. I don't want to repartition/format these as they have some data on which I'd prefer not to loose.
# uname -r
2.6.31.5-127.fc12.i686.PAE
# mount /dev/sdb1
mount: special device /dev/sdb1 does not exist
#blkid
/dev/sdc: TYPE="highpoint_raid_member"
[Code].....
View 4 Replies
ADVERTISEMENT
May 2, 2011
I did the latest update on the opensuse 11.4 other day and since then my USB drive is not mounting. initially I thought its gone because my son dropped on the floor. But then when I plugged it to Windows 7 machine it mounted then I plugged it into another Ubuntu 10.10 machine it mounted so I figured out the there is some issue in the latest update. I have all the VMs in this drive and my main laptop is with OpenSuse 11.4
View 9 Replies
View Related
May 25, 2010
I wanted to try out the new Ubuntu 10.04, but since I don't have any CD's available I thought I could use my 9.10 CD and upgrade from it.
1. Installed 9.10 on the entire disk.
2. Went to update manager(?) and clicked the button to upgrade to 10.04
3. It successfully downloaded all the files.
4. When installing the new files it suddenly said that it failed to update, and it stopped. Then I went to do a hardware test, but none of the menus were working.
I had to do a manual shutdown, and reboot the computer. This time I was met with an error "Unable to mount root fs".
I figured the upgrade was the problem, so I reinstalled 9.10 to try without upgrading.
1. Reinstalled 9.10 on the entire disk.
2. Went to update manager(?) and started the normal update for 9.10 so the system would be up-to-date.
3. Same thing happened now, it fails to update and it makes my computer useless.
I've already checked my hardware for errors, can't find any. I've checked the CD for errors, can't find any. I had 9.04 on the same computer a few weeks ago, and it was rock-solid. Worked like a dream. I'm using Win7 now though.
View 4 Replies
View Related
Jul 4, 2011
I have had a Dlink 323 network file server for some time. After first getting it going, it has worked fine on both my Ubuntu computers and my Windows machines including a dual boot Ubuntu machine / Vista box. Recently, a problem has appeared that started at about the same time. The Ubuntu machines give me the "Unable to mount location, Failed to retrieve share list from server" error message. The Windows machines still work fine. This message can be caused by a number of problems. I suspect that this time was caused by a update. The linux machines are 11.04 and 10.10.
View 7 Replies
View Related
Feb 11, 2010
- my windows shares were working fine, since there was aktualization they don't any more
- i have Fedora 12
- my /sbin/mount.cifs und /sbin/umount.cifs have 777 permissions
when I execute my mount with normal user:
/sbin/mount.cifs //sdvbdta01/KADA/ /home/kada/dvb-shares/persoenlich -o user=kada,dom=dvbern,pass=$PASSWD
I get this error:
/sbin/mount.cifs: permission denied: no match for /home/kada/dvb-shares/persoenlich found in /etc/fstab
When I execute that mount with root then it works, but I can't edit documents on that share with normal user
View 2 Replies
View Related
Dec 5, 2009
after the latest 157mb of updates i have made on fedora 12 i cant mount any media (CD/DVD/USB etc). I keep getting this error "Failed to execute child process "gnome-mount" (No such file or directory)"
View 7 Replies
View Related
Jan 25, 2010
shall explain my problem step by step! so that you all can understand!
1. Out of 120gb hardisk, i created an 100mb in the first cylinder of the harddisk and installed the "symantec boot magic" for dual boot option after switching on the system.
2. Next 70gb is for windows and installed the same.
3. Rest were for "Linux" !! In which i created on 100mb for "/boot" loader files, then one 1gb for "swap" area and the rest of the memory for "/" mounting point.
4. After all, i installed the "VMWARE" in windows, and while selecting the mount of linux, i selected the respective linux portion, and did the other settings.
5. Once done with this, i powered on the machine in vmware, but it was saying "BTMAGIC" not able to find, install again..
6. Cant we not mount the linux via "vmware" which is installed in windows, as i had used "symantec boot magic" for mounting windows/linux??
View 3 Replies
View Related
Jan 22, 2011
i have installed both windows 7 and fedora on my laptop but i installed fedora on only one drive i didnt create a swap so now whenever i try to open my drive the followng message appears UNABLE TO MOUNT DRIVE if i format the drive will i lost my installation files and would have to install again
View 6 Replies
View Related
Nov 16, 2010
I'm trying to do a fresh Fedora 14 install from usb live stick. On installation got to partition program and since I want my old /home partition I pointed the partitions as they're supposed to be and apart from /home marked all partitions to be formatted to ext4. After the format or in the end of it came up a prompt I couldn't past. The following link shows a pic of that prompt:
[URL]
What should I do to complete the install? I have partitions:
/
/home
/boot
/swap
Solution: Burned the image on CD and installed from it.
View 3 Replies
View Related
Jan 21, 2009
i try install fedora 10 from cd live. But i can't. the partitions are unable to mount. i recive a message:
Quote:
DBus error org.freedesktop.DBus.Error. No Reply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
And from windows boot, and works. why no mount if the live-cd did this?
View 3 Replies
View Related
Dec 3, 2009
I updated through yum tonight had to reboot but it hangs on reboot.Now I can't use my computer.here point me in the right direction to fix this.I have no clue.I really need to mount this encrypted drive but it won't let me this way I can get my files and move them to another os that is working.I put in the password but it will not mount for some reason.My first venture in fedora land does not seem to be going well at all right nowor a page I have work to do and I really don't have time to be reading hundreds of pages to find the right answer.
View 9 Replies
View Related
Mar 6, 2010
Everything was working great with my FC12 box. I think the Fedora Gods must be punishing me as I had recently downloaded an image for another distro, but was only trying to install it to usb and play with it on another computer!
Then I tried to boot and I got an error message:
Code:
mount: you must specify the filesystem type
mount: you must specify the filesystem type
mount: you must specify the filesystem type
[code]....
Can't mount root filesystem
Boot has failed, sleeping forever. I obviously don't understand the boot process well enough to fix this problem, so I'll describe what happens in more detail. (Feel free to correct my terminology so I can communicate in a more concise manner next time!)
1) Bootloader comes up fine and I'm able to select my kernel. (This problem affects all kernels)
2) Then as usual a whole bunch of text goes flying across the screen identifying hardware.
3) During this hardware identification, at the point where all my disks are being identified sd 1, sd 2, sd 6... I get the error shortly/immediately after this.
I cant tell for certain if its immediate because so many mount messages are spewed and I am not sure how to 1) pause the screen or 2) scroll the screen or 3) output this information to a file. But it does sit long enough on the disk identification which is right before the mount errors. I was able to look at a previous dmesg and noticed that dracut comes right after the disk identification, so I think the mount errors are being generated in dracut. (Now whether dracut is the problem or not is another issue) I am able to boot using a rescue usb and mount my LVM manually and then browse the root filesystem, so at least my data seems to be safe!
my /etc/fstab:
Code:
UUID=7acf1074-64bb-4a73-9558-f9657f712756 /boot ext4 defaults 1 2
/dev/mapper/vg_willowtree-lv_swap swap swap defaults 0 0
tmpfs /dev/shm tmpfs defaults 0 0
[code].....
View 11 Replies
View Related
Nov 4, 2010
Whenever I insert a USB drive (or plug in my Motorola Droid to copy files to it), a window pops up that says 'Unable to Mount File System'. Not Authorized. The drive shows up under the Places menu, but if I click on it I just keep getting the same error.
View 14 Replies
View Related
Feb 11, 2011
Code...
Every once in a while I get this error when I plug in my external hard drive. I'm a bit worried I might suffer some kind of data loss. I'm trying to get some more information about this. I have been using this hard drive with Windows 7 previously so it is most likely NTFS I think.
View 3 Replies
View Related
Jun 23, 2011
I reduced my size of "LogVol00" by "lvreduce -L" command. Then i tried to reboot for mounting. But i am getting error as below. please help me in this, i don't have data in "LogVol00". but i don't want to reinstall OS. error i am getting when i boot:
"mount: wrong fs type, bad option, bad Superblock of /dev/mapper/VolGroup00-LogVol00
Missing codepage or helper program, or other error In some casses useful info is found in syslog -try dmesg| tail or so"
View 1 Replies
View Related
Mar 2, 2010
I am unable to mount Windows shares on Fedora 12. From Nautilus, I can navigate to the shares, but when I attempt to open one I get a dialog "Password required for share ... on ..." asking for username (prepopulated with my username), domain (prepopulated with MYGROUP) and password. I have the same username on the Windows box, but when I enter the password and click Connect, the dialog just pops up again. I'm not sure what "domain" is, tried with my Windows workgroup name, no good. If I blank out either username or domain, the Connect button is disabled.
I tried using the mount command:mount -t cifs //192.168.0.2/... /tmp/mnt -o username=adrian,password=...,iocharset=utf8,file_m ode=0777,dir_mode=0777
That did work once, but now gives the useful error message:mount error(5): Input/output error
Refer to the mount.cifs(8) manual page (e.g. man mount.cifs)
I can run Windows instead on the client machine, and that gives me access to the shares, no problem.
I have libsmbclient-3.4.5-55.fc12.i686, but that was installed a month ago. I don't see any more recent changes to anything relating to the samba client. I've never had to enter a password to access Windows shares. Actually, it looks like the problem may be on the Windows side, although as far as I know, nothing has changed there. Using smbclient with debuglevel set high, I see failures with this error:SPNEGO login failed: NT_STATUS_REQUEST_NOT_ACCEPTED
Every now and again, I can connect to one or more shares, but after a few attempts, I can't connect to any more. Tried rebooting the Windows box, but that's had no effect. Oh, and "smbclient -L" shows domain as the host name of the windows box, but anonymous login (smbclient -L -N) shows domain as the workgroup name.
View 5 Replies
View Related
Jul 12, 2011
I've setup an NFS share on my Fedora 15 host of which Google'ing told me that it had changed radically from the old NFSv3 config. Ie. no more /etc/hosts.allow or /etc/hosts.deny files.....My current setup is this..../etc/sysconfig/nfs:
Code:
#
# Define which protocol versions mountd
[code]...
View 4 Replies
View Related
Nov 23, 2010
i bought following server about some days ago :Supermicro X8DTi1u Super micro
2x 1TB Sata 2 i want install centos 5.5 64bit on it, i download centos 5.5 64bit from centos.org torrent link but when i want setup centos it says :kernel panic : not syncing : VFS: unable to mount root fs on unknown block(253,3)and also i set adptec raid in my bios and set raid 0 in adptec raid controller (my mainboard has onboard raid) i run any command you think like linux dd, linux all-generic-ide, linux noprobe, linux nostorage and etc but none of them does not work for ,e
View 6 Replies
View Related
Aug 8, 2011
I recently switched from fedora 14 to 15. Today my computer suddenly shut down during an update, as I thought it overheated I decided to clean the cooling system and reapply thermal paste. However, now the system won't boot anymore ("kernel panic - not syncing : VFS: unable to mount root FS on unknown-block").
I would like to either solve this booting problem, or mount the fedora 15 filesystem and recover some files. Whichever is easier.
I have another drive with fedora 14 (antec below) which boots fine:
Code:
View 4 Replies
View Related
Apr 29, 2009
I use F10 at home and while away from work on my laptop. Recently I could get the VPN sorted out ( I can now connect to the vpn (ppp0) server at work from home or anywhere else). I am trying to mount a windows folder that is on the work server on my F10 box at home through the VPN connection that is first established.What I know about the windws server
servername
sharename
username
password
When I try this
sudo mount -t cifs //pxxxx/home/abcd /mnt/dir/ -o username=abcd,password=xxxx
I get this error
mount error: could not resolve address for pxxxx: Name or service not known
No ip address specified and hostname not found
I think the VPN connection is established successfully. I have a ppp0 connection under ifconfig with an IP address after vpn connection is established.In windows I just map the network drive (\pxxxxhome) username=abcd, password=xxxx and mount the folder as "abcd on pxxxxhome"
View 3 Replies
View Related
Aug 10, 2009
I have no idea what I'm doing so here goes: I installed Fedora and clicked the "encrypted" box during the process. What I want to do now is "browse" the volume using "File Browser" but I only get messages like, "Unable to mount location, org.freedesktop.DeviceKit.Disks.Error.Failed: Not a mountable file system". Why cannot I not see the files? I have the password. I would like to be able to move, delete, rename, etc files but that seems impossible because I cannot access the drive.
View 1 Replies
View Related
Nov 21, 2009
Quote:
I've upgraded to fedora12 from fedora11 using preupgrade.
The process was successfull till the first boot, where I got above error message.
View 1 Replies
View Related
Aug 19, 2011
I have a bootable utility toolset that I put together with Fedora 14, one of its primary functions is to map a user designated share via script and access information from it. The command that I used, that functioned perfectly, in Fedora 14 was:
Code:
sudo mount -t cifs -o user=provided.account.name //file-server.mydomain.com/share/images /mnt/source
[code]...
View 3 Replies
View Related
Jan 22, 2011
I have 500GB external HDD. I have to mount it my CenOS -4.8 Machine.(kernel-2.6.9.89EL 32-bit) . External HDD partitions are ntfs file system partition. I have tried to mount ntfs partition in linux . But it's not done.
mount partition with ntfs parttion in linux.
View 3 Replies
View Related
Nov 1, 2010
I am trying to install linux kernel manually, for this I had compiled linux-2.6.36 with minimum drivers and features. Note that ext2, ext3, jffs file system support and sd ata_piix drivers are set as inbuilt kernel modules.
I had two hard disk for my Intel x86 box sda and sdb. I have running linux on sdb from which I can access sda. sda has one partition sda1 as ext3 fs.
I had created following directories at sda1 root, bin, boot, etc, sbin
After compiling kernel, I had copied bzImage, system map files to boot folder. then using 'grub-install' I had installed grub on sda. after installation I edited grub.conf to setup kernel image.
grub.conf
Code:
After this I booted sda by changing HDD boot priorities,And wow I got grub prompt -- linux kernel booted but as soon as it tries to mount file system it dies with error,
Code:
I accept that I dont have binaries for init and no initialization stuff in /etc, but I think problem is I am not able to give correct rootfs to kernel.
View 3 Replies
View Related
Jul 5, 2011
I have been running Fedora 15 for a about an month and a week ago I started to get messages on two machines to say it could not update. I am using the "software update" package. I am using Fedora 15 64 bit. Installed from a DVD originally on one machine and the other was updated from Fedora 14. Each machine is on a different network. I start the "software Upates" package. it gets the list of packages to be updated and then when I go to "install updates" I get the following message.
"Transaction error An unspecified transaction error has occurred. Under more details; Could not add package update for fedora-release rawhide-15-3 (noarch) update: fedora-release-rawhide-15-3 noarch" The repository for fedora is active in the repository list.
View 2 Replies
View Related
Jul 26, 2010
I have a Dell Inspiron 1720 running Ubuntu v10.04 with a wireless card.My desktop is a Dell Optiflex running WinXP.The desktop is connected via ethernet cable to a Linksys wireless router. Certain folders on the desktop are set for sharing. Up until early last week I was able to access the desktop folders from the laptop with no issues.Suddenly I am now getting this error "Unable to mount location Failed to mount Windows share" whenever I try to access the desktop folders from the laptop.I suspect an upgrade is the culprit, but not sure.
View 3 Replies
View Related
Jun 26, 2011
actually some my windows ntfs partiitions are unable to mount at start up. the error msg is -'some of your partitions are unable to mount press 's' to skip or 'm' to manually mount.
View 14 Replies
View Related
Mar 21, 2010
i'm trying to connect to the three other machines in my house but am having quite a hard time doing so. i've never had a problem in the past with ubuntu, but, with 9.1 and windows 7, things have gotten a bit harder. i'm running 9.1 and my roommates are running windows 7. i've installed, set up and configured samba and i can see the computers on my network, but any time i try to access either of the drives, it says unable to mount location: failed to mount windows share.
View 4 Replies
View Related
Oct 4, 2010
Not able to mount windows drive & foder, in linux. i have got following error.
mount error 92 = Protocol not available
View 10 Replies
View Related
