I basicly want certian folders to deny access to all clients exept those that supply the correct user name and password. I tried following the directions here (for the basic authentication), but its not working.i have
I just did a new install of 11.04 because I got a new ssd and now when I try to host my site from /home/USER/www/ apache says "You don't have permission to access / on this server" 403 Forbidden. I had the same exact configuration files on my other install of 11.04 and everything worked fine. One thing I did notice is that when apache installed it did not create a www-data group. I also serve a folder for music on another port and I can get to that fine.
I own several websites and have always developed on my local Apache server.
I am in the middle of releasing a new product on one of my sites and have been making rapid changes to the site based on feedback from customers, etc. as my product has gone live...
My local server is NOT refreshing pages. I make a change, click "refresh" in my browser and nothing happens.
I have tried clearing my browser cache and it makes no difference. Eventually (several minutes later) my changes happen.
Problem is, I need to be making these changes rapidly, and I really prefer to check my work on localhost before uploading it to a live server where I'm getting a lot of visitors right now.
This is a very recent problem as I have never had this occur before. Running 10.04.
I've tried, but now I give up. I'm trying to run Apache on FC9. Nothing fancy, no extras, just the default installed apache. [correction, I have coldfusion installed, however the service is not running] I've set the Listen variable to every combination I could think of, with no success. I can set it whatever I like (such as my local IP) on any port other than port 80. If I try to set it to 192.168.x.x:80, it gives me the error message: Starting httpd: (98)Address already in use: make_sock: could not bind to address 192.168.x.x:80
I've run netstat commands to try and find applications listening on port 80 and found nothing. Whenever I chose a port other than 80 to get the service to start successfully, I am able to serve pages locally. But even with my ports forwarded correctly, no one outside the local network can see it. I've checked with nmap that my machine is opening the ports and even cheated, disabling the firewall during testing to ensure it was not part of the problem.
I noticed while locally nmaping my server that whenever I set Listen 192.168.x.x:8081, 8081 is opened, as well as normal port 80. When I stop the httpd service, both those ports are simultaneously closed. Why is httpd opening port 80? I'm assuming this is related to why I cannot assign Listen to port 80. If I run remote scans from sites like www.nmap-online.com and www.canyouseeme.org, nmap-online will report filtered on ports 80 and 8081 if my httpd is running, and if httpd stopped, 80 is closed, filtered 8081.
Can you seem reports success on ports 80 and 8081 if httpd is running, fail if httpd is stopped. I'm sure thats all a lot of information cluttered in to all that. To summarize, I cannot start my httpd server on port 80, and I cannot ever see my webpages beyond my local network. Am I missing something extremely is simple and I'm just over looking it?
The situation is this, I have one of those router cable/wifi. So I have the main pc plugged to the router, the router give local ip for all my network (the others computers connects via wi-fi). Main pc starts up apache under Fedora 12, http://localhost.. works, http://127.0.0.1.. works, http://192.168.0.13 (my local ip) works. But when I try to connect to http://192.168.0.13 from another pc of my local network, it doesn't work. The others pcs are running windows vista.
I go another computers ping 192.168.0.13, responds! From the main computer ping 192.168.0.14, responds! So, there is communication between the machines, but I cant get to work under apache. I tried opening port 80 with iptables, i tried changing apache's port to another.
I have installed Ubuntu on four machines at work and have been blown away. On my machine I have Apache setup for web development and other machines can "see" it using my IP address. I would like to have it so they can access by the name of my computer though. I have no local DNS server so I guess I need to hard code the relationship in each machine? Ideally I'd actually like to be able to use subdomains (which I use locally to avoid annoying .htaccess path problems). i.e. from another machine on the network to go to [URL].
When we run php scripts that move/rename/etc files, the script does not have access to write to files in our web root. Changing permissions to 777 fixes the problem, but obviously this is not an option..I've been reading up about suexec, phpsuexec, and suphp, but we can't seem to figure any of this out.In phpinfo(),the Server API reads: Server API Apache 2.0 Handlerbut on another server (where everything works, it reads : Server API CGI/FastCGIIs there ANY way to achieve this?
I'm configuring Apache for the first time on this box (8.04 LTS) and Apache2 for the first time ever. "Out of the box" it runs fine and I get the "It Works" page okay. But I'd like to use the virtual site feature to direct Apache to a folder in my user space, and I keep getting errors.
When I point a browser at localhost, the 404 message is "The requested URL / was not found on this server." and the /var/log/apache2/error.log ends with "File does not exist: /htdocs.
Here's my config file from the apache2/sites-available folder:
Code:
I diff'ed this file with the default and the only differences are in the DocumentRoot line and the <Directory ...> line.
My public_html folder has permissions 755 and the index.html file is 644.
I have FC10 newly installed, and Apache is serving content from /var/www/ okay.
I'm trying to get Apache to serve web content from user's home directories. This is what I've tried with no success:
Uncommented 'UserDir public_htm' in /etc/httpd/conf/httpd.conf and commented out 'UserDir disabled'.
And...
Uncommented user directory section in /etc/httpd/conf/httpd.conf. It now reads as follows: # # Control access to UserDir directories. The following is an example # for a site where these directories are restricted to read-only. #
[Code].....
I also tried setenforce 0 to temporarily disable SELinux until the next reboot. No luck. It doesn't appear to be an SELinux issue.
That's as far as the information available will take me. I still get URL 'Not Found' when I try to access http://192.168.0.2/~myusername/
I've followed several guides and am trying to get NFS working on my local network. For starters, I think I should be able to NFS mount a drive on the server (192.168.1.65) TO the server. From there I'll work with another client (currently 192.168.1.80)
I want to enable User Directories in Apache. So in httpd.conf I set:
Code: <IfModule mod_userdir.c> #UserDir enabled // commented out UserDir public_html </IfModule> Directory /home/kees is listed has the following file permissions: drwx--x--x 32 kees kees Directory /home/kees/public_html has the following file permissions: drwxr-xr-x 2 root root
Directory public_html has two files: index.html and index.php, both with file permissions: -rwxr-xr-x 1 root root If I now try to open http://myhost/~kees/index.html (or index.php) in my browser I get a 403 Forbidden error. If I look in my error log I see the following messages if I first try to open the index.html and then the index.php file:
I have apache working,i have users set under admin group in /home/admin/username/html that is with an html publicfolder at the end, now permissions are set right, /html is set to mode 777, and the contents also inside them. But everytime i do a 10.0.11.25/~les i get a damn forbidden error code, its got me so pissed off and i dont' know whats the problem. This is the error i get: Forbidden 403 You don't have permission to access /~les on this server.
Code:
[Tue May 05 19:37:48 2009] [notice] Apache/2.2.11 (Unix) DAV/2 PHP/5.2.6 configured -- resuming normal operations [Tue May 05 20:44:30 2009] [error] [client 10.3.0.254] (13)Permission denied: access to /~les denied
I want to automaticly set the group ownership of user home directories to a group that the user is not part of. This is so that Apache can be part of this group and can access user public HTML directory, but other users are not able to access in any way the files in the users home directory. What I have seen that works manually is adding the user and then changing the group for the home directory. But I want to automatically set this when the user account is created. WHat I see happening is that when /etc/skel is copied, it automatically sets the group and ownership of everything to the users default group and ownership. I've seen some suggestions on setting permissions, but these don't seem to work because it seems that users are able to cd into a directory and not list it, but if they know the file name they can access the file.
I have a virtual server setup on port 80 that works fine, however, if I change the port to, say, 8080 the browser then fails to connect.I'm using webmin to configure everything, all the other settings seem to work as I would expect.I get the error "Safari canī open the page http://192.168.0.12:8080 because Safari cant connect to the server 192.168.0.1." in safari, and i get something similar on the xubuntu machine in firefox connecting via localhost.It's almost as though theres a firewall in the way, but I think it's more likely to be some config problem.
I have mod_rewrite and mod_proxy loaded properly for the apache2 package in 11.04. I added the following to the bottom of my apache2.conf:
RewriteEngine: On RewriteRule: ^/$ /test [L]
The server restarts fine, but / is not getting rewritten in the slightest. And when I added the RewriteLog directive, the log file had absolutely nothing in it.
I have tried setting apache up on port 8000, because my ISP blocks port 80.
When I try to listen on just port 8000, I can never connect, internally or externally. When I try to listen on both 8000 and 80, my internal computers will drop the 8000 from the url and connect on 80, and external computers try to do the same thing, but can't get through on port 80.
I know my router is set up correctly, I have 80, 8000, and 8888 all being forwarded, I have confirmed with [URL] that 80 is blocked, but 8000 and 8888 are open. I am able to connect to gnump3d through port 8888 internally and externally, but not apache2 on port 8000.
netstat -tnap confirms that apache is running and listening on ports 80 and 8000 to all users.
I am currently running a VPS with Ubuntu Server 10.10. I have been trying for a few days now to get some programs to run when the system starts, but with no luck. I am trying to use rc.local to do this, there is an: /etc/init.d/rc.local - http://paste.monsterprojects.org/mpbjhwhbjzhbjrr (Was already on the system, I have not edited this) and: /etc/rc.local - http://paste.monsterprojects.org/mpbjhwhbkkkhwez
If i run the /etc/rc.local script manually all the programs start fine, and if i run /etc/init.d/rc.local start, all the programs start fine. But for some reason they just don't seem to be starting when the system boots.
I have 2 users and I would like to copy all the files and folders in one home dir to another.... sounds simple, til i got started. Ive tried
Code:
sudo cp -nRv /home/user1/* /home/user2 but that didnt copy the .* folders. Im after the firefox and thunderbird folders mainly, but all of them is OK too.
im talking about the .adobe, .amsn ..........
How can I copy the .* folders from one user home folder to another and then give the correct permissions to the new user.
I have a postfix mail server on ubuntu 10.04 lts behind a router. so all local users are fetching/sending mails through ms outlook using local IP. Sometimes when internet goes down and any mail send then it bounced back immediately saying domain not found. Can u please tell me how i configure to hold all mails in postfix server rather than bounce when internet fails and will pass through when restored the internet around 15-30 minutes?
I found that if any usual user is logged into a NDS-tree, then _local_ root has full access to user's network shares, including the user's home directory located on remote Netware-server. Is it by design or have I missed something? Nevertheless in windows local admin has no access to network resources mounted of any other user. If you runas shell (as admin) then admin in principle can't "see" network shares which were mounted (connected) by other users - they are accessible ("visible") per session.
I have transferred many emails from my hotmail account to a local folder system using Thunderbird, only to realize that I really want them in another machine. (The first time I put them into a VM). So I installed thunderbird again, and copied the whole Mail folder from the first install into the default folder of the second.Now the new thunderbird sees the folders, but will not display their contents; I have checked that the permissions are the same in the two installs. Both installs will happily download new emails from my hotmail account, but I don't really know how to transfer BACK everything in thunderbird(1) to hotmail so that I could bring it back to thunderbird(2).
Take a physical user FRED. FRED is a linux user ( known by linux on his laptop ) FRED is a Samba user ( Known by samba on the samba pdc server ) When he logs locally (with username/password) on its standalone laptop (with no network), he is known as FRED:user. He access his data in /home/FRED/. When he logs through samba (with username/password) on the domain MY_DOM, he is known as MY_DOMFRED:MY_DOMdomain user. He access his data in /home/MY_DOM/FRED/. ) Is it possible that the human FRED has only one repository and have full access to its repository regardless of how it was connected. If yes, how to do it
2) If not, Is it possible that the human FRED has full access to /home/FRED/.............. and /home/MY_DOM/FRED/.
I have lived with this for months and it isn't a big deal, but my Thunderbird 3.1.7 shows 2 Outboxes-Local Folders. Right now I have my Inbox divided into Local Folders and *****@Sympatico.ca. I would like to put everything under Local folders but I am unsure if I should do this when there are 2 Outboxes
I need a program to run on Ubuntu that must be easily set up to do a series of different cloning operations at specific times between the USB drives on a single Ubunu pc, depending on the day of the week." So on Monday folder B is forced to match folder A, Tuesday C forced to equal D ... and on Sunday a whole bunch of these clonings happen. This must all run unattended (at 2am) and be robust with no "what do you want to do next messages" or having the whole thing give up if there is a problem with one file. Though I do need a log of success or failure. Windows programs that do this stuff are FolderClone and GoodSync. I looked at Unison and Rsync and one or two others, but none appeared set up to do what I need, or to be excessively complex / general. I don't need something that can sync two copies, or over internet ....
In the office there is a local network with samba+openldap PDC. The local domain name is company.net. The company desided to create a corporate Website on a remote hosting and desided that the site's domain should be company.net which is same as local network's domain name. So now it is not possible to reach that corporate website from within the company's local network because, as I guess, bind9 which is installed on above menioned PDC looks for company.net on a local webserver. Is there a possibility to let people from this local network browse the remote site?
First off please don't say "go read the man page". I need instructions for newbies
I basically want certain folders to deny access to all clients exept those that supply the correct user name and password. I tried following the directions here (for the basic authentication), but its not working. Someone kind enough to help out a confused person like myself?
