I'm trying to setup an Apache webserver on my computer in order to practice HTML5/CSS3 for an upcoming competition I'm in. I'm able to access my site from inside my network, but I cannot outside my network. I've had several people try, and they all report that the server just times out. I'm running Ubuntu 10.04 and Apache 2.2.17
I've tried, but now I give up. I'm trying to run Apache on FC9. Nothing fancy, no extras, just the default installed apache. [correction, I have coldfusion installed, however the service is not running] I've set the Listen variable to every combination I could think of, with no success. I can set it whatever I like (such as my local IP) on any port other than port 80. If I try to set it to 192.168.x.x:80, it gives me the error message: Starting httpd: (98)Address already in use: make_sock: could not bind to address 192.168.x.x:80
I've run netstat commands to try and find applications listening on port 80 and found nothing. Whenever I chose a port other than 80 to get the service to start successfully, I am able to serve pages locally. But even with my ports forwarded correctly, no one outside the local network can see it. I've checked with nmap that my machine is opening the ports and even cheated, disabling the firewall during testing to ensure it was not part of the problem.
I noticed while locally nmaping my server that whenever I set Listen 192.168.x.x:8081, 8081 is opened, as well as normal port 80. When I stop the httpd service, both those ports are simultaneously closed. Why is httpd opening port 80? I'm assuming this is related to why I cannot assign Listen to port 80. If I run remote scans from sites like www.nmap-online.com and www.canyouseeme.org, nmap-online will report filtered on ports 80 and 8081 if my httpd is running, and if httpd stopped, 80 is closed, filtered 8081.
Can you seem reports success on ports 80 and 8081 if httpd is running, fail if httpd is stopped. I'm sure thats all a lot of information cluttered in to all that. To summarize, I cannot start my httpd server on port 80, and I cannot ever see my webpages beyond my local network. Am I missing something extremely is simple and I'm just over looking it?
The situation is this, I have one of those router cable/wifi. So I have the main pc plugged to the router, the router give local ip for all my network (the others computers connects via wi-fi). Main pc starts up apache under Fedora 12, http://localhost.. works, http://127.0.0.1.. works, http://192.168.0.13 (my local ip) works. But when I try to connect to http://192.168.0.13 from another pc of my local network, it doesn't work. The others pcs are running windows vista.
I go another computers ping 192.168.0.13, responds! From the main computer ping 192.168.0.14, responds! So, there is communication between the machines, but I cant get to work under apache. I tried opening port 80 with iptables, i tried changing apache's port to another.
I have installed Ubuntu on four machines at work and have been blown away. On my machine I have Apache setup for web development and other machines can "see" it using my IP address. I would like to have it so they can access by the name of my computer though. I have no local DNS server so I guess I need to hard code the relationship in each machine? Ideally I'd actually like to be able to use subdomains (which I use locally to avoid annoying .htaccess path problems). i.e. from another machine on the network to go to [URL].
I have downloaded the Apache web server so I can set up a local web server to test my PHP pages. The download automatically went into the default "Downloads" folder instead of the /opt folder where the Apache instructions said to download the file to. I have tried to move the file from the Downloads folder to the /opt folder but am denied access - says I don't have enough privileges (or some such thing?). Bummer.
So I tried to use the terminal to install the file that I downloaded from Apache (following their instructions - actually copied/pasted the command line so there would be no typo problem) - no joy.
The first thing I was instructed to do was to enter the su command, which I did, and was asked for a password. I have tried every password I have ever used on this system and I receive the following:
su: Authentication failure
and it returns me to the prompt. What is my password?
I checked the archives for similar problems and came up with zero relevant hits.
Up until yesterday I was able to access these devices through the web interfaces that they use. I'm running Ubuntu Karmic 9.10 I have 3 PCs running on my network, and 2 NAS devices: Ubuntu (main computer, also has an XP partition)) - static IP 192.168.1.30 Ubuntu netbook - DHCP IP Windows XP (HTPC) - static 192.168.1.50 Linksys NSLU2 (was running Debian, problem arose when trying different configuration, now back to stock firmware) - static IP 192.168.1.100 Dlink DSM-G600 - static IP 192.168.1.120
I used to be able to able access these just fine using my main Ubuntu setup. Now, it will no longer display the pages. Internet access is fine, i can even access my DSL/Router device's internal config page. The netbook and the Windows HTPC can both log into these devices, as well as the XP partition of the Ubuntu system. I have tried using a VM of XP within Ubuntu, bridging the network device, i have the same symptoms - internet is fine, cannot access local network web-logins.
Access to fileshares among all machines remains unchanged. another odd behavior is that i can SSH into the NSLU2 device from all the machines, but i get odd things from this computer - it will let me log in, asks for a username and pass, but if i run anything like mc or htop, it just blanks the terminal in an odd way. from other computers the login and display are fine.
Im using fedora 8 and have installed php5 ,and mysql and i see only php blank pages ,some idea? must be php.ini, but i am newbie installing php and apache, i disabled selinux, and grant all the permisssions to excecute..
I have a Cent OS 5.4 32 bit final installed in my dedicated server. I used to run lighttpd with php in my server until now and all was fine. But yesterday I changed my website which needs apache to run. So installed apache using yum install httpd command. Then I added the virtual host name of my domain in webmin panel but when i try to run my php script in browser then its not opening php pages. Instead it downloads php files like index.php when i open in browser. So I guess apache is not able to compile and run php pages. Only html pages are opening right now..
I have Joomla installed at /var/www/joomla, if I navigate to http://localhost/joomla, I get a 404 error, but if I add index.php, the page loads. What is wrong?? Also I am not able to navigate to the administration part of Joomla for the same reason, typing in index.php doesn't load it in this case. Yes I have verified that all files are present in the directory.
I have apache running on my server, and also Zoneminder, a surveillance system running on the same machine. Both services runs without glitches, and I think apache's config as well as ZM's config are fine. I am not sure I understand how apache (not to mention the whole thing zoneminder, apache, web browser...) works. Pretty hard to manage when you dont know what you are doing. Also, when I try the supposed to work zoneminder webpage in my web browser, I get nothing (a blank page), or sometimes a "Not found" error message. The latest seems to be from apache because it is the same font as the "It works!" message when I try http://localhost:80
The only bit of information I have so far is in the apache error log (/var/log/httpd/error_log) and it says: Code: [Sun Mar 21 00:35:14 2010] [error] [client 192.168.0.100] script '/srv/httpd/htdocs/zm.php' not found or unable to stat [Sun Mar 21 00:46:04 2010] [error] [client 127.0.0.1] File does not exist: /srv/httpd/htdocs/zm It seems that the "zm.php" is missing.... That would be why Apache cant find the page?
I am trying to set up my Apache server with FastCGI as the CGI engine. It will be mostly running PHP, but I may add Perl or something else later. I started from a completely fresh install of Ubuntu 11.04 with every update available. I used the install CD to install a LAMP server as part of the system install.I am using the tutorial at URL...to add the FastCGI functionality. I am having some problems with getting everything to work.The first problem was that apache2-suexec-custom wouldn't accept a different document root. I fixed that by compiling apache2-suexec from source with the document root changed to the correct path.
The next problem is that every php page I load throws a 500 error. Apache's error logs show that FastCGI isn't returning the page data correctly to Apache.
I can connect to anything locally, I can SSH in locally but nothing works from outside my network (can't access pages in apache, can SSH, etc.) I've checked the logs I can think of, but what should I be looking for? The last thing I did today was add a FW rule to log and drop from an IP, saved my iptables to a file in /etc. (this was at 10:45am). The last time I successfully logged in remotely 1:03pm. I connected multiple times in between. I've rebooted remotely once or twice. That's it. I've already flushed iptables.
I just tried changed the port that apache runs on from 80 to 8080 (I need port 80 for a difference service so I am changing the apache port). After doing this I load 127.0.0.1:8080 in a browser and get a 404 error generated by apache, if I change it back to 80 it works fine.
I have 2 servers that are mirrored. They host 3 separate websites. Two of these websites are regular HTTP and the other is HTTPS with Digest authentication as well. The reason there are 2 servers is because one is a primary and the other secondary in case the primary goes down. Recently I decided to upgrade the secondary server then make it the primary server. I have done most of the configuration and the sites using regular HTTP are working perfectly fine. The page using SSL is not. Apache fails to load and here are the errors I am receiving the the error log file:
Code: [Fri Aug 13 09:27:00 2010] [warn] RSA server certificate CommonName (CN) `newserver.domain.com' does NOT match server name!? [Fri Aug 13 09:27:00 2010] [error] Unable to configure RSA server private key [Fri Aug 13 09:27:00 2010] [error] SSL Library Error: 185073780 error:0B080074:x509 certificate routines:X509_check_private_key:key values mismatch
For the first warning, I cannot find anywhere that says the CN "newserver.domain.com", only what the CN is in the SSL key. I have no idea where to even start with the other errors.
Most of my googling odysseies lead me to articles which talk about compiling apache & php from the source as this is touted to be more flexible. But the problem we have is this...we already have an apache 2 web server running. Now how do we serve php pages of it.
I have a postfix mail server on ubuntu 10.04 lts behind a router. so all local users are fetching/sending mails through ms outlook using local IP. Sometimes when internet goes down and any mail send then it bounced back immediately saying domain not found. Can u please tell me how i configure to hold all mails in postfix server rather than bounce when internet fails and will pass through when restored the internet around 15-30 minutes?
I've enabled LDAP authentication on my 2.2.15 Apache server, but now pages load very slowly. As in, 1.515s with it enabled, and 187.4ms without (just the base page, numbers collected via Firebug). Here's my LDAP config (other directives snipped) -
I would like to set-up a pretty fast a running apache. I would like to use him so to launch a pretty small web site of 10 static html pages. At this time there is no security concerns (even though I want to do it right) , because the computer has not even ethernet cable. I have some experience, 8 years ago I Was setting up virtual hosts in fedora, so this process is not a blackbox for me.
I'm trying to set up a small Intranet system to run OpenERP or similar using browser-based clients. I have an Ubuntu machine running 10.04 desktop edition to act as a temporary/testing server until we set up a proper, dedicated machine with 10.04 server edition. I have installed Apache2 from the repos and it is up and running fine - locally. That is the problem, I can't access the server from other machines on the LAN. Ping works, btw. So I've been reading tutorials and howtos for the past week, but for the life of me, I can't find what I'm doing wrong. The standard Apache setup seems to be made to "just work", so although I've looked at the various configuration files mentioned in the tutorials, I haven't actually changed anything.
I have a base install of a LAMP server on my system, and I'm trying to get mod_rewrite working on that local server (the directory of the local site is [URL]. I added this to my /etc/apache2/httpd.conf file, which was blank before I did so:
Code: <Directory /> Options FollowSymLinks AllowOverride All Order deny,allow [code]....
It's supposed to redirect everything except the listed directories to index.php, which is used as a front controller. However, if I type in [URL] <any other page> I get a 404 error.
I will be setting up Apache web server in DMZ and Oracle web server (Windows) in LAN. The requirement is to allow logged in visitors to view / change their details via the web site. What is the best way to configure this. Is simply allowing web server's ip to communicate with oracle server's ip (and the oracle port) is secure enough or is there a way to do this more securely?