I have installed apache php and mysql on my pc during debian installation... some of my friends complain they cannot access my webserver from their home and it's available only within my local network... Please help regarding this...
View 6 RepliesI want to restrict the access to my local web server by IP address. Im in a LAN (192.168.200.xx) so i have this:
[code]....
But when i try to connect from 192.168.200.4 it says i don't have permission to access
At home I have two computers running linux connected to the same router. I would like to be able to connect them so that I can move files between them and execute simple commands. What is the most simple way to access a prompt on the other computer or to mount a partition currently used by the other computer?Using the www it is possible to connect two computers using ssh, but it should be easier to do this over the LAN, right? I have been googling a lot but not found anything.
View 10 Replies View RelatedI'm trying to setup a NFS4 server (no security, local home network behind FW). It seems that I'm missing something because 'rpcinfo -p' does not list v4 for NFS: petit-pois:/home/eric# rpcinfo -p
[Code]...
I'm trying to set up a small Intranet system to run OpenERP or similar using browser-based clients. I have an Ubuntu machine running 10.04 desktop edition to act as a temporary/testing server until we set up a proper, dedicated machine with 10.04 server edition. I have installed Apache2 from the repos and it is up and running fine - locally. That is the problem, I can't access the server from other machines on the LAN. Ping works, btw. So I've been reading tutorials and howtos for the past week, but for the life of me, I can't find what I'm doing wrong. The standard Apache setup seems to be made to "just work", so although I've looked at the various configuration files mentioned in the tutorials, I haven't actually changed anything.
View 9 Replies View RelatedI have setup a Linux Centos with apache server on it in a home network. Everything works fine. When I access the webserver I put in the address bar the IP address of the server which is 192.168.0.150 and when hit enter, it prompts the page where I have to put login information. The login information is set to: username: admin@localhost.local password: *************
It takes long time for authentication go through and load the page eventhough I am accessing the site in a same home local area network with fast ethernet connection. How can I change the localhost.local to something else like maybe [URL] instead and if I have to change settings in other files as well?
I'm trying to setup an Apache webserver on my computer in order to practice HTML5/CSS3 for an upcoming competition I'm in. I'm able to access my site from inside my network, but I cannot outside my network. I've had several people try, and they all report that the server just times out. I'm running Ubuntu 10.04 and Apache 2.2.17
My site is at [URL]
Here is the output of ifconfig
Code:
eth0 Link encap:Ethernet HWaddr 00:26:22:50:0f:0a
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
[Code]....
I have installed Ubuntu on four machines at work and have been blown away. On my machine I have Apache setup for web development and other machines can "see" it using my IP address. I would like to have it so they can access by the name of my computer though. I have no local DNS server so I guess I need to hard code the relationship in each machine? Ideally I'd actually like to be able to use subdomains (which I use locally to avoid annoying .htaccess path problems). i.e. from another machine on the network to go to [URL].
View 3 Replies View RelatedI have some beginner questions about DHCP, Avahi, and configuring a small home LAN.Suppose I have a dynamic IP address assigned by my ISP, which requires DHCP be enabled in my dsl modem/router/"firewall" [sic]. Suppose for simplicity I have just one PC behind the dsl modem.I think "enabling DHCP" in the modem/router means that a DHCP client runs on the router, which communicates with a DHCP server run by my ISP when I boot up a PC on my LAN. Is that guess correct? Can I get DHCP to assign a particular local IP, say 192.168.1.10 (which is not the one taken by the router--- for this discussion, let's say that is 192.168.1.0) to my PC each time I boot it up?
Now suppose I want to build a stand-alone firewall, so that my LAN will have the firewall and the first PC behind the modem, with the first PC virtually behind the firewall. By default, I think these will both have DHCP clients running which I need to configure properly. The firewall should also have a DHCP server which should control how local IP addresses are assigned, correct? I should try to arrange that the LAN has only DHCP server, only one NTP timeserver, only one DNS nameserver, correct?My first PC seems to have installed an autorun client called Avahi, which performs DNS multicast services and incorporates something called zeroconf which seems to have something to do with remote desktops, which I don't need and which is a potential security hazard. But it seems that Avahi is an intrinsic part of the KDE desktop and cannot be removed. Just want to be sure that Avahi can coexist comfortably with dhcp3-client, which is also installed on that PC. They perform different tasks, correct?If I can get the stand-alone firewall to work, I know I need to turn off the commercial firewall in the dslmodem/router/firewall device. Should I purchase a bridge and try to turn off the routing function also?
I am running 11.3 64bit. I need to set up a simple web server, and I was trying to follow this tutorial to do it HowTo: Configure a Linux Apache Web Server on Suse/openSUSE for SSI, Includes, CGI, Common Gateway Interface, AddHandler, ExecCGI, AllowOverride, htaccess, DocumentRoot The web server is running but this part could not be applied and I need to change the ownership. it seems the command lampserver does not exist.
[Code]...
In a squeeze box, I installed awstats and it's working like a charm. Its cron job update the awstats database every 10 minutes (as it runs as root). But I would like to be able to update the statistics from the browser as well. So I setup everything as required and I gave "read" access to "others" to every apache log file. Now, a couple of questions came to my mind:
1. Am I compromising server's security giving "read" access to "others" to apache log files?
2. Instead of giving "read" access to "others", I could add www-data user to adm group (as apache log files are owned by root:adm and permissions are rw-r----). Is this more secure than giving "read" access to "others"? 3. If the option would be giving "read" access to "others" at the end, a log file would be owned by root:adm and its permissions be rw-r--r--. As apache rotates its log files, when Apache create a new log file, does it preserve the permissions (rw-r--r--) or create it with the default permissions (rw-r-----)?
Having some memory loss i think (in my head not my pc). I have set up apache before , then changed to dsl in the last week and cant seem to get this new modem/router to work. i can get the loopback address to work, as well as the network ip. can NOT get my other machines to hit the server on the network .
also no connection from outside the network from port 80. my modem is a motorola (att) ,apache2 on my toshiba laptop, amd x2, 3gigs ram.
Two nights ago I decided to switch from testing to unstable. Since then I am able to connect to the internet, but not to anything on my local network. I am unable to ping this computer from another one on the network. This computer is connected through wireless. I thought that something might have changed with iptables that was blockinghe localnetwork. I tried to "flush the iptables settings with "iptables -F". Since that didn't work I uninstalled iptables (which didn't work and I reinstalled iptables). In my browser I tried to connect to my router and that doesn't work either.I connect to this computer daily through ssh and connect to a NAS. Without ssh and my NAS I feel kinda lost
View 6 Replies View RelatedI'm trying to set up a *simple* MTA in my local network. The only thing it should be able to do is send system / daemon mails to admin@mylocaldomain. but at the moment I'm pretty much overwhelmed by everything i *should* know in order to set up this MTA
my infrastructure:
- servers:
* test01.mylocaldomain --> should send mails (with exim) to admin@mylocaldomain
* dns01.mylocaldomain --> dns-server
* mail.mylocaldomain --> mail-server (postfix / iredmail package)
I configured exim to be in "internet"-mode. now i have a variety of errors I can choose from (and a variety of solutions that i don't like ).. my test is always an email from test01.mylocaldomain:
echo "Hello World" | mail -s Testmail admin@mylocaldomain
- after running the config, i get the error: admin@mylocaldomain: all relevant MX records point to non-existent hosts --> google says, edit and udpate update-exim4.conf.conf --> dc_relay_domains='mylocaldomain' --> but this exim installation should not be a relay at all. it should only be able to SEND (to this domain), not deliver it. or do i get something wrong?
- after i added dc_relay_domains='mylocaldomain', i get --> SMTP error from remote mail server after RCPT TO:<admin@mylocaldomain>: host mail.mylocaldomain [192.168.x.x]: 550 5.1.1 <root@mylocaldomain>: Sender address rejected: User unknown in virtual mailbox table --> but i don't want to create an account on the mailserver for the SENDER...
- ...so i thought, i'd config exim with the domain "test01.mylocaldomain" (including the server name), so that the sender is clearly from another domain than the mail server handles (e.g. user@test01.mylocaldomain).. but then i get this --> SMTP error from remote mail server after RCPT TO:<admin@mylocaldomain>: host mail.mylocaldomain [192.168.x.x]: 450 4.1.8 <root@test01.mylocaldomain>: Sender address rejected: Domain not found
I really just wanna send mails in my local network.
I will see ipcam in my local network from my tablets. I'm install server/client but I can't even ping my Ipcam from my tablet.I'm ping my ipcam from my server
Code: Select allping 10.42.0.22
PING 10.42.0.22 (10.42.0.22) 56(84) bytes of data.
64 bytes from 10.42.0.22: icmp_seq=1 ttl=64 time=0.639 ms
eth1:1  Link encap:Ethernet HWaddr 00:25:22:1c:6e:05Â
     inet addr:10.42.0.1 Bcast:10.42.0.255 Mask:255.255.255.0
     UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
tun0Â Â Â Link encap:UNSPECÂ HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00Â
     inet addr:10.42.0.1 P-t-P:10.42.0.2 Mask:255.255.255.255
     UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
     RX packets:1775 errors:0 dropped:0 overruns:0 frame:0
    Â
[code]...
my tablet can receive ip, can see ftp on server but can't see anything in my home network.
I have a new Debian 5.04/ppc install on a G5 tower and it's not able to browse the local network. The clean install could see the network, then I installed the Samba server, and it hasn't worked since. Samba server never really worked, and I'm guessing I messed something up. I've reinstalled network-manager, and removed / reinstalled samba.
I have a small home network (6 machines) running wired and/or wireless, pc/mac and linux.This machine can PING other machines by name and IP address.This machine can PING itself by name and IP address
Other machines can PING this machine by IP address only, not by name.Nautilus network browser only shows the "Windows Network" icon, which, when clicked, shows an empty window.I've got networking up fine on all my other machines but this one is stumping me.
I have three Debian systems running, along with several XP laptops, PS3 and two DirecTV systems. I use two of the three Debian systems as media servers, and the third is an older system mostly for playing around with. My home network is running fine with the following nuisance. The two newer Debian (Lenny) systems are <barney> and <mitzi>, the older is named <oscar>, running Debian Sarge 3.1. From either locally or remote login to <barney> and <mitzi> I can ssh into either of the other two systems, however when logged into <oscar> I cannot ssh by name to either of the other systems. e.g. ssh: mitzi: Temporary failure in name resolution..However, from <oscar> I can ping outside my network (e.g. ping www.google.com) with no problems.I can also ssh to the other systems via IP address, just not by name.
I've compared the /etc/ssh/ssh_config, /etc/resolv.conf, /etc/ssh/sshd_config and other files between the two systems and not seeing anything peculiar. arp, route, etc., don't show different behavior between the systems either.
2 of us have been googling all morning trying to find out how we can restrict ftp logins to their own home directories only but nothing we've found so far has worked. We've tweaked sshd_config so that they default to their home directory but they are able to navigate up/across/down to everything. This is a "straight-out-of-the-box" debian 5.0.5 Netinst. Just a basic system with Apache/MySql/PHP/SSH and no desktop.
View 6 Replies View RelatedI need to setup a web server with apache (worker) and php. What is the cleanest way to this with Debian Squeeze?
View 1 Replies View Relatedi am searching for way to connect to my home network from any point only just if i have internet. i've heard about VPN and i think that this is right solution for my problem. can anyone point me to doc for beginners for setting up a VPN server? ps i've already searched for some articles and found two which were really for newbie, but it is interesting to find "best" how to for configuring vpn server.
View 1 Replies View RelatedI'm trying to set up a bind9 server for my home network, I have all my IPs set to 10.0.0.X. I would like the forward and reverse to be simply "machinename", not "machinename.domain.com", as I don't want to type a domain everytime.
In my named.conf
zone "net.local" in {
type master;
file "/etc/bind/net.local.ns";
allow-update { none; };
[Code]...
Running Ubuntu 9.10. In the Remote Desktop config dialog I get: "Your desktop is only reachable over the local network. Others can access your computer using the address 127.0.0.1 or tabatha.local." I understand this means only the loopback ip address is available. All my other machines show their true local ip address (e.g., 192.168.1.104) in this dialog. Thus I cannot log on to this desktop from other machines.
When I try to do a remote logon from another Ubuntu 9.10 box (or from an XP box using a VNC viewer), I get: "Connection to 192.168.1.102 has been closed." What steps are needed to make this machine show its actual ip address? All file sharing between the various machines is working properly and all windows shares back and forth between XP and 'nix, and among the the vaious XP boxes and linux boxes are available as designed.
I have installed debian on my laptop and included during the installation the webserver version. Now I want to develop a page locally to test it before I put it on the web. I first had an old reflex, jumping straight away and installing xampp. But then I thought that I already all that it takes as I installed the webserver feature of debian. I installed phpmyadmin ( with the command #apt-get install phpmyadmin) as to be able to create and attribute databases but when I try to log in I have the following message:
"Error
#2002 - The server is not responding (or the local MySQL server's socket is not correctly configured)"
I googled but I cannot find the mysql.conf (I searched using "find") but with no result. It is all very blury what is going on with this webserver option running on my laptop...
I've installed Debian on a Sun Ultra 450 Enterprise system using the net install version, so I know that my network is working correctly. However, now that Debian is installed and I bring up Gnome, I have no network access. I've set eth0 to DHCP, and have pointed it to my DNS server, but it never gets any information from the DNS server.
I've looked through /etc/network/interfaces, which looks like this:
# This file describes the network interfaces available on your system and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface allow-hotplug eth0
#NetworkManager#iface eth0 inet dhcp
/etc/resolv.conf contains:
nameserver 192.168.0.1
which is correct.
I've run
/etc/init.d/networking stop
/etc/init.d/networking start
So far, nothing works. Why would the Debian network install disk work, but not be smart enough to set my network correctly from the start once I'm actually running Linux? Also, how do I get the network running in Gnome?
Ive been trying to setup bonding on my debian lenny box for about a week now with still no luck.i thinks its ver 2.6.26 or summing like that.The nics are bonded and it has all the network details but for some reason I cannot ping anything on the network and I cannot ping the lenny box.
View 3 Replies View RelatedTrying to install and configure a webserver - With Postfix, Courier, MySQL And Squirrelmail. But I am stuck. Postfix mail system is not running. It seems to execute /etc/init.d/postfix start, but it really did not. reload; fatal: the Postfix mail system is not running. And in mail.log is that:
Master.cf: line 40: bad transport type: smtp_data_d$_done_timeout=1200
I recently installed two PC with debian lenny (kernel 2.6.26). One is called serveur-debian1 and the second one serveur-debian2. I have installed gnome,samba, mysql5, apache2, php5, and Virtualbox,bridge-tools on them. On serveur-debian2, i installed an other virtual debian lenny with apache2,mysql5,php5,nagios and centreon on it to view my network. I remember having installed a soft to access nntp on serveur-debian2 in order to test nagios.
Since a few days, i have problem to access to my servers. rom my windows 7 client, i try to ping serveur-debian1. Response is OK but not for all resquets Always from the same computer, i try to ping serveur-debian2. Response is OK but not for all again.
When i launch a ping on serveur-debian1 and serveur debian2 at the same time i have:
ping 1 to 10: serveur-debian1: response OK
serveur-debian2: no response
ping 11to 14: serveur-debian1: no response
serveur-debian2: response OK
ping 15 to 25: serveur-debian1: respone OK
serveur-debian2: @ip serveur-debian1 network unreachable (there's no error, it shows me the ip of serveur-debian1)
If i switch on the debian virtual server on the serveur-debian2, and i ping it at the same time, the response is OK for all resquests. The problem is very strange. I can't have a correct connection and when i launch a request from a software which access the mysql server, the requests failed ...
I upgraded a Guruplug Display machine running Lenny to Squeeze. It's running Linux on a MicroSD device, running an ARM-cpu.
# uname -a
Linux gplugD 2.6.29 #1 Wed Feb 16 17:59:04 IST 2011 armv5tejl GNU/Linux
yeri@gplugD ~ $ cat /etc/debian_version
6.0.1
However, after rebooting, every non root user was unable to access anything related to the net.This means, DHCP failed to auto start, ntp is giving errors, etc
# ntpq -p
localhost: timed out, nothing received
***Request timed out
daemon.log:
Mar 27 06:07:44 localhost ntpd[1478]: ./../lib/isc/unix/ifiter_ioctl.c:348: unexpected error:
Mar 27 06:07:44 localhost ntpd[1478]: making interface scan socket: Permission denied
Mar 27 06:07:44 localhost ntpd[1478]: Too many errors. Shutting up.
As root:
gplugD ~ # ping 85.12.6.171 -c 1
PING 85.12.6.171 (85.12.6.171) 56(84) bytes of data.
64 bytes from 85.12.6.171: icmp_req=1 ttl=58 time=42.1 ms
[code]....
I've been using wicd (1.6.2.1 was the latest version on my desktop computer, maybe it got updated) without any problems for a long time. This morning after switching the thing on to read the morning news with a nice hot cup of coffee I got a number of funny Gui system messages: Wicd needs to access your computer's network cards. Password
View 12 Replies View RelatedI just installed Debian and am getting a problem where I can't open the list of network connections. I can use the network manager applet to connect to wireless networks, but I cannot access the network connections list from there either (right click "edit connections)
I'm not incredibly knowledgeable with Linux, but I tried a few simple things I could think of like reinstalling the packages, or restarting the interfaces. (ifdown/up wlan0)
It's strange, because when I click "network connections," I see it show up for a second on the bottom panel, I get some rotating mouse icon while I wait a few seconds and then if goes away. Is there some kind of logfile that could help me identify the problem?
Using Debian 6 on eeePC1000HEB with Ath9k (i think) wireless card. Net Interface: wlan0