I am a bit new to fedora I have the following scenario in testbed of mobile ad hoc network
pc1 pc2 pc3 pc4
192.168.1.1 192.168.1.2 192.168.1.3 192.168.1.4
Now I have the source as pc1 and pc4 is destination and I want to send data/ping pc4 from pc1 via pc2 and pc3 using firewall firestarter,
i connect to internet with the connection (with Name: DSL Connection 1) that made by myself. now i wanna use the firestarter but i have a problem.
View 5 Replies View RelatedI am trying to set up a computer to act as a firewall/gateway on my network, and am using the Firestarter program to do this. Everything appears to be set up correctly, and I followed the instructions on their website completely, and I get an error message when I try to start the firewall. It says that eth0 (my internal NIC) isn't ready, and to make sure it's active.
View 3 Replies View RelatedSince I installed FC11 I can't get vpnc to work (I always getno response from target").Also I can't ping any external IP even with the firewall disabled.What I see strange is that I had the same configuration in FC10 and the router configuration seems okay to me:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
10.64.64.64 * 255.255.255.255 UH 0 0 0 ppp0
[code]...
Have homebrewed machine, was running Fedora 8. Installed Fedora 10.Firestarter firewall manager keeps crashing after about 5 minutes. Restarts, runs for a while, then crashes.Thought it might be an IPTABLES turf war with the native Fedora 10 gui firewall manager, so disabled that at System > Admin > Firewall. Also disabled SElinux. Still have problems.Firestarter firewall seems to work OK, just the gui Firestarter monitor/manager.If anyone has ideas as to cause, I'll take a clue.I could use Firestarter to generate the IPTABLES by ..manually editing the /etc/firestarter/inbound|outbound/allow-.. files and then../etc/init.d/firestarter restartBut I find the events log useful to look at. Anyone know where the events log file is kept in the file system?
View 4 Replies View Relatedhow to configure my firestarter firewall. I have a website which requires the port 1935 to be open. I figured out how to open the port using firestarter. Is there anyway to make the port open only to this website, and not to every other website for security reasons of course.
View 4 Replies View RelatedI updated my system with system updates and when i restarted.I couldn't access the internet from my desktop. i got on laptop internet worked just fine..i disabled firestarter and mozilla connected to the internet just fine. I turned firestarter on. and i couldn't reach anything.. What do I have to do to get firestarter to allow me to connect to the internet via firefox
View 3 Replies View RelatedI gave a presentation on the Firestarter Firewall interface at my local LUG meeting tonight (another member followed with a presentation on iptables).You can download a copy of the handout from this link.
View 3 Replies View RelatedI was just wondering if anyone uses 'Firestarter' firewall, and what you think of it?
View 13 Replies View RelatedI am trying to run Firestarter firewall but keep getting the message ETH0 is not ready. This problem has been highlighted by others but is there a simple way of sorting this out, answers in other forums are wide and varied. but it's not clear if they have been successful.
View 7 Replies View RelatedI am using an virtual machine. where I need to ping from one machine to another. earlier I was able to ping. But after going to google.com once, I cannot ping back to this machine.
But if I gave ping -I eth1 <IP> then I can ping.
I cannot install any package, so tell me solution which includes not installing any package.
I need to set up my centOS computer as a firewall in my home network. Ive got 2 interfaces, eth0 and eth1. I want to allow and forward all traffic on eth0 and block all traffic on eth1 except ssh, ping(icmp) and DNS. How do I do this? Ive tried some editing in /etc/sysconfig/iptables but no luck.
View 1 Replies View RelatedI have Linux server with VMware Server 1.0.8. When I creating a virtual machine, I can not "send" a PING to the virtual machine. In the virtual machine, I have installed CentOS 5.3 (32bit). In the virtual machine I have defined the addresses IP. So, whey I can't "sent" a ping to the virtual machie? I have to set something on the Linux server?
View 3 Replies View RelatedI installed Firestarter firewall on debian Squeeze.Now i note there is a gui available in System->Administration which apparently does not need to be running all the time - its not set up to start on boot.When I boot I notice the boot message has a line saying "Starting Firestarter firewall .... failed"When I am logged in and type "/etc/init.d/firestarter status" as the Firestarter FAQs say, I get"Firestarter is running... ... (warning)"I can run the gui manually and still same message.
View 2 Replies View RelatedI am doing work on serial port. I want to send/receive data to/from Microcontrolar through serial port. But I don't know how to initialize, receive and send data to Serial port. i am new in fedora so i hav'nt any deep concept of fedora.can anyone send me C code , which communicate through serial port in fedora (or atleast help me). I am using Fedora 11.
View 6 Replies View RelatedI have a Dell laptop with a bcm4312 wireless card. Every once in a while though, the laptop is unable to send or receive any data for 30 seconds. The connection is not dropped, and nothing shows up in any system logs. Both the wl and b43 drivers have this problem, but it works fine under vista.
View 1 Replies View RelatedI have connected xp and fedora through crossover cable . xp has ip address 192.168.0.1/24 (manually assigned) fedora has 192.168.0.2/24 with default route equal to 192.168.0.1
I can ping fedora from xp computer but i can't able to ping xp from fedora computer.
I have manully edit the /etc/sysconfig/network-scripts/ifcfg-eth0 file with correct subnet mask and ip address because when i tried to give ip address manully in network manager the subnetmask is replaced with gateway address don't know why.
Now i want to share internet through crossover cable . xp is connected to internet through wireless usb adapeter.
I have the following machine :
laptop : Dell Inspiron E1505
Wireless : Intel Pro Wireless 3945 (ipw3945-1.2.2 + ipw3945d-1.7.22 + ipw3945-ucode-1.14.2 / eth1)
Printer : HP C4580 Photosmart wireless (hplip-3.9.8)
Ethernet : Broadcom Corporation BCM4401-B0100Base-TX (b44.ko / eth0)
External Modem : Siemens CL-110 ADSL
OS : Fedora 6+11 (currently on fc6)
The external modem is connected via the laptop ethernet and provides the internet connection.
The printer is connected via wireless adhoc to the laptop's IPW3945 wireless card. I use firestarter as firewall. When firestarter is disabled everything works fine. If enabled it blocks my printer. I have tried to open every possible port via firestarter (according to several other threads) with no luck. My printer is set (under system-config-printer) as :
Code:
hp:/net/Photosmart_C4500_series?ip=192.168.2.5
$ netstat -rn .....
I did a shields up test and it told me that 1056 ports were stealth but that my pc responded to ping and was visible on the net. How do i fix this?
View 4 Replies View Relatedusing redhat on server machine and open suse on client machine.i have installed nfs server and and it is running properly but when i want to mount shares from my client machine it gives the following.
error. "mount.nfs: mount to NFS server '10.3.31.146:/share' failed: System Error: No route to host" both systems ping each other and firewall is also disabled. another problem is when i remotely access from my server machine to client machine it gives the following error ssh:connect to host 10.3.31.147 port 22:connection refused what can be the problem?
Host - Fedora 12 64bit
KVM
VM - Windows Server 2008 64 bit
bridge-utils
VM can ping host and Internet but host can't ping VM.
I set VM static IP 192.168.0.205.
It turns out dynamic IP - 192.168.0.55
On host:
I am the new user to ns-2. I would like to know is it possible to send the keys or some value as the packet data (content of the packet) in ns-2 (for wireless environment).
View 1 Replies View RelatedI'm trying to write a script that will continuously ping a server and then send out an email when the server is down, and then when it is back up. Then, continuing with monitoring. I would like to not run this in cron, because I don't want to script to run with multiple instances.
For example,
Ping a server every minute.
-If successful, do nothing.
-If failed to ping, then send out email stating that server is down.
-Once ping is successful, then send out email stating that server is up.
I only want it to send an email once after a failure, so the end user isn't get an email every minute that it fails. Once it is successful, then send the email (one time), stating that the server is up. Then, continue to ping and if fails again, repeat the process.
My company email server has been working flawlessly for the last 5+ years. Recently, one of our clients put their email server behind a firewall (an assumption on my part; details below). Ever since, email sent from within the company (192.168.xxx.xxx internal address; all computers and server is behind a NAT firewall [Netgear FVX538]) is either being sent to the client after some delay (if email is sent using Outlook) or is being deferred until the messages expire (Thunderbird, Squirrelmail, etc.). Email sent to the client from anywhere outside the company (using Thunderbird, Outlook or any other email client) is also delivered without any problems (usually after a short delay).
All other emails to the World are being sent without any problems at all (both inside and outside the company; using any email client or webmail). I did contact the client's postmaster, but the client, being a large government agency, will probably not address the problem (if it is on their side) anytime soon. I am not sure if I can do anything from my end to solve the problem. Ever since the problem with the client began, I added two statements to the postfix configuration file (smtp_pix_workaround_delay_time = 20s and smtp_pix_workaround_threshold_time = 0s); this seemed to a bit - it reduced the delay for emails sent via Outlook to a few minutes (as opposed to 30+ minutes); emails sent using Thunderbird/webmail are still being deferred.
Server details: Dual quad-core processor machine, 32 GB RAM, dual 1 gbps network, running Fedora 14 (64-bit; loosely modeled along the lines of Perfect Server (with ISPConfig2) as described on the howtoforge website). Running Postfix (v. 2.7.1), Dovecot (v. 2.0.9).
Postfix details:
alias_database = hash:/etc/aliases
alias_maps = hash:/etc/aliases
body_checks = regexp:/etc/postfix/mbl-body-deny
broken_sasl_auth_clients = yes
command_directory = /usr/sbin
[code]....
I emailed the client's postmaster suggesting they disable smtp fixup. But still, what bothers me now is that Outlook works (both within and outside the company) while Thunderbird, webmail, etc. (used by ~90% of the users) do not. In addition, all email clients from outside the company can send email (authenticated via the company server) to the client without any problems. Is there anything I can do on my end to make non-Outlook clients work within the company (webmail is hosted on the company server; so, it would have an internal address as well)?
I am learning to setup firewall in my home for that i have selected four system(sys1,sys2....sys4) for testing .I have configured sys2 to act as a firewall with two NIC. sys3 and sys4 are inside the firewall . sys1 is not connected to firewall for testing purpose.
the IP assignments are follows :
sys1 : ( fedora, not connected to firewall i am thinking, But i am not sure )
IP : 192.168.2.1 ,
gateway : blank
dns1 : blank
dns2 : blank
sys2 firewall ,IPTABLES )
code....
what happened is that sys1(not connected to firewall) can ssh to sys4(connected,inside firewall),since the rules are written not to ssh form sys1 to sys4..
then I came to know whatever the request I give, It directly goes as sys1 --> sys4. Not as sys1-----> sys2(firewall)---> sys4 .and the firewall is not filtering and processing anything for both inbound and outbound (i think it's my mistake some where). the requests are directly going inside without firewall.
Ive got a problem on my server ....installed Debian 5 , Webmin and than syscp settung up syscp ready ....
I try to ping "localhost" ansver ping: unknown host
I try to ping "localhost." there is a host with IP 127.0.0.1
I need it to change it in "localhost"
Is that the bind9 maybe?
I have two machines on this network, one running Ubuntu and the other running Fedora.
When I'm using the Wireless network on the Ubuntu machine, I cannot ping the Fedora machine. Everything else works. I can browse the net fine.
If I switch over to the Wired Network then I can ping the other machine.
I don't understand why ping doesn't work only over the Wireless. I can ping the router so I'm guessing it's getting blocked by the router but I didn't block ICMP traffic.
I tried asking on IRC and they ran out of ideas too to find out where the problem is.
I just installed my first EVER bind DNS server. I am running bind9 on Ubuntu 10.04. Everything seems to be working great except one thing: If I ping a host that I have set up in bind by its HOSTNAME the pings take 5-6 seconds to reply/print to the screen between each echo response. If I ping by the host's IP address, they echo back very quickly.
I have read that IPv6 can cause this, but I have disabled it in /etc/sysctl.conf and the problem still exists.
I know everyone says this can't be a DNS issue, but this never was an issue with dnsmasq (which i was using prior), and it doesn't make sense that the ping are ONLY slow when pinging by hostname and not IP.
Configs below:
Ping by hostname - there is a 5-6 second delay between each one of the responses:
Code:
Ping by IP - the responses come VERY quickly one after the other:
Code:
/etc/resolv.conf:
Code:
Code:
rev.0.168.192.in-addr.arpa:
Code:
So, I have an Virtual Machine running CentOS 5.4. It sits behind a hardware firewall which also does NAT'ing. I've set up plenty of these, so I know for sure the firewall and NAT rules are set up correctly. From the host, I can ping anything in my subnet and the gateway. But I can't ping anything else beyond the gateway. I can perform DNS queries and when I try to ping, it finds the appropriate IP address.But from the outside, I can ping the PUBLIC address (It's a 1 public to 1 private address NAT, not 1 public to multiple private). I've tried it with IPTABLES on and off, with no change.
View 11 Replies View RelatedI have Mandriva One 2009.0 (192.168.1.100) on one box and Mandriva Free 2010.0 (192.168.1.118) on the other. I can ping router (192.168.1.1) from both of these boxes but I can't ping one box to the other and the other way around. What's going on?.
Do I have to change some settings in router?. Or is it firewall issue on those two machines?. Both of these boxes are connected by cable. Symbol of the router: TL-WR340G.
